The Best Antminer D3 of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Antminer D3 of 2023. Check our ranking below.
2,625 Reviews Scanned
- Hash rate: 19.3 GH/s (Variation of ±5% is expected)
- Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp)
- Hashing algorithm: X11 (Dash and many others)
- Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3
- All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board! Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply
- Includes Bitmain PSU
- FEYOTH The air flow direction runs from the AC input to the DC output, which is the same configuration as most miners. This proves beneficial for those with large-scale mining operations where heat management is a major consideration.
- The APW7 can work stably in environments with a 50°C ambient temperature. If temperatures exceed 50°C, the PSU should be underclocked (refer to Max Load vs. Ambient Temperature Graph in the user guide for details).
- The PCB BORRGTU uses a conformal coating to prevent damage from high voltage spark discharges on MOS pins, or near high-pressure solder joints when external conductive particles or dust enter the PSU.
- Considering the high temperature in mining operations, all internal components are selected with a standard of 105°C, so the APW7 has a much longer lifespan than a general use PSU under similar high temperatures.
- One APW7 can power up one S9i, one L3++, one D3, one V9, one X3, one E3 or one Z9 mini. This APW7 has 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors) The Power supply doesn’t include a powercord, please prepare one yourself.
- Designed for the AntMiner L3+/S9/T9/D3
- Includes ten 6-pin PCIe connectors
- Maximum output: 1200W @ 110v-120v, 1600W @ 220v-240v
- Power cord not included, requires standard PC power cable (C13)
- 6000 RPM
- Official Bitmain Replacement Fans for AntMiner S9/L3+/D3
- Also compatible with S7/S5+/S5
- Replacement for L3+ A3 D3 Control Board and BB board Works with any batch L3+ A3 D3 miner You must update firmware after replacing the control board
- Antminer S5 Original Fan
- 4-pin cable
- screws not included
- metal protector is available for purchase
- Specialty Item and No Refund. 30-day defective item replacement be provided
- Model:SHLF1212RHE-17
- Size: 120*120*38mm,Voltage: 12V, Current: 5.0A
- All pictures are taken in kind, please check and compare the fan model carefully before placing an order.
- All item was tested well working before sent out，Made in China Quality 100%
- If you are satisfied with the purchase, please leave a good comment after receiving the goods. If you have any questions or problems, please contact us in time, we will try our best to solve your problems, thank you.
- The most important part of the fan is the motor: All of ur motors are imported from Taiwan that quality is more stable and the working life is longer.
- Size: 119mm x 119mm x 38mm, Dual Ball Bearing design fit for all 119-120mm fan.
- High efficiency:above 90%(can save more power in the same air volume)
- High Compatibility: DC mini 4Pin
- 100% satisfackion : If you are not satisfied for any reason, please contact our customer server first we will provide best server for you immediately.
- Durable Fan Duct
- Highly compatible Fan Duct
- Package Dimensions: 39.37 inch L x 39.37 inch W x 19.69 inch H
- Package weight of the Product:12 Ounces
- The most important part of the fan is the motor: Each Cooling Fan is tested before shipping and 100% working that quality is more stable and the working life is longer.
- Size: 120 * 120 * 25mm
- Working life: 80,000 hours at an ambient temperature of 25 degrees
- High efficiency:above 90%(can save more power in the same air volume)
- 100% satisfackion : If you are not satisfied for any reason, please contact our customer server first we will provide best server for you immediately.
- ♛Model: SHLF1212GHE-07
- ♛Size: 120 * 120 * 25mm
- ♛Bearings: high precision double ball bearings
- ♛Standard voltage: 12V
Current: 0.8A
Noise: 46.5dba - ♛100% brand new and high quality
- Male Plug: NEMA 5-15P - Rated up to 15A 250V For Hospital Equipments and Heavy Duty Equipment that require High Voltage
- Female Receptacle: IEC60320 C13 / 6FOOT long with cUL and CSA approval
- Works for all ASIC and GPU miners like T15, S11, DR5 , S9, S9i, S9j, Z9, A3, L3+, L3++, D3, E3, T9, V9, X3, and all older models. Also for Innosilicon and all Miners
- DYNAMIC USE: Ideal for use as a replacement to an old or missing power cord or simply as a handy backup
- SAFETY RATED: UL listed for safety; durable design for long-lasting strength and performance
- Bearing: high precision double ball bearing
- Mining Fan with efficiency heat dissipation, circulating and exhausting stuffy air.Allows the fans to be laid flat or stand upright.
- 12v dc fan 4-PIN PLUG: RED wire is positive , yellow wire is FG function, black wire is negative, blue wire is PWM. The fan wire length is 15.7 inches
- Our products have multiple safety features against overheating, overcurrent, overvoltage and short circuit.
- Replacement Fan for: Avalon 6, Avalon 741, Antminer S9 (S3 S4 S5 S7) , Whatsminer M3, Ebit E9 AntMiner D3 L3+ T9 S15 T15S17 T17 Misieren SHLF1212GHE-07 2. Replace Cryptouniverse CPF-12V Fan ¨C Square Fan DC 12V 2.1A, 120x120x38mm
- Keeps bugs and dust away from your expensive mining equipment.
- Fits Antminer S3, S5, S5+, S7, S9, T9, T9+, L3+, L3++, A3, E3, X3, B3, V9, D3.
- Magnetic backing - no screw needed. No need to void warranty. Snap it on the back of the miner and you are done.
- Reusable - re-washable. We recommend to check and clean filter regularly.
- works for all Antminers with PWM 4-pin Fans
- chip artificially generates a 2200~6500 Fan RPM signal back to the miner's control board
- work under 5~36V
Last update on 2023-08-18 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Antminer D3?
Do you get stressed out thinking about shopping for a great Antminer D3? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Antminer D3, which is why we have assembled a comprehensive list of the greatest Antminer D3 available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Antminer D3 that you consider buying. Your questions might include the following:
- Is it worth buying an Antminer D3?
- What benefits are there with buying an Antminer D3?
- What factors deserve consideration when shopping for an effective Antminer D3?
- Why is it crucial to invest in any Antminer D3, much less the best one?
- Which Antminer D3 are good in the current market?
- Where can you find information like this about Antminer D3?
We’re convinced that you likely have far more questions than just these regarding Antminer D3, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Antminer D3, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Antminer D3. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Antminer D3 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Antminer D3 currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Antminer D3 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Antminer D3?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Antminer D3.
- Customer Ratings: Number ratings grade Antminer D3 objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Antminer D3.
- Product Quality: You don’t always get what you pay for with an Antminer D3, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Antminer D3 is should be an indication of how long it will work out for you.
We always remember that maintaining Antminer D3 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Antminer D3 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.