Skip to content

Contents

20 Best Arc Generator of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Arc Generator of 2023. Check our ranking below.

2,683 Reviews Scanned

SaleRank No. #1
AEDIKO 2pcs High Voltage Generator DC 6-12V to 1000kV Boost Step-Up Inverter Arc Pulse Generator Power Module High Voltage Transformer
  • High Voltage Generator:Input Voltage: DC 6V to 12 V;Output Voltage: About 500KV~1000KV;Input Current: 2A - 5A
  • High Voltage Generator Cables: Output Cable Length: About 100mm;Input Cable Length: About 100mm(Red is Positive)
  • High Efficiency: Voltage Generator Modules are Made of a High-Voltage Transformer Through a Circuit of Components and Using the Principle of Tesla Coils , Output High Voltage Pulse,High Efficiency
  • Easy to Connect:High Voltage Generator come with Input and Output Cables and the Peripheral Circuit is Simple,Just Connect the Cable with the Switch and Battery and the Discharge Intensity is Great
  • Wide Application: High Voltage Generator Can Be Used for Student Science Experiments, Electronic Instruments,Anion Generators,Science Small Productions and etc.
SaleRank No. #2
Comidox 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board)
  • This kit is made for the booster coil and has a professional circuit diagram for the convenience of electronics enthusiasts.1 set of list:PCB Board/120 ohm resistance/UF4007 ultra-fast recovery diode/N20 transistor/Heat sink/M3 * 6 screws/Boat switch/Pin header (3-8 Pin random)
  • Uses: Chinese-language general experiments, electronic instruments, negative ion generators, scientific small production, etc. This circuit works with a stable high-frequency arc, which is extremely high in temperature and can easily ignite combustibles. Therefore, it is called a plasma lighter.
  • Transformer structure: The transformer has two windings in the primary, one set of thick copper wire is the main winding, one set of thin copper wire is the feedback winding, and the secondary output is high voltage. In the transformer, two thick and thin copper wires are wound together, which are the main winding tail and the feedback winding head, respectively, connected to the positive pole of the power supply.
  • Before welding the transformer, it is necessary to scrape off the welded portion of the coating and the covered wire tip with a blade and then solder. After successful production, the transformer must be potted with epoxy or insulating wax for long-term use. The maximum output of the transformer is designed to be 15KV, and the maximum output must not exceed 15KV, which is 1.5cm arc.
  • The kit has an input voltage of 3.7V. That is, the voltage of the 18650 battery, if you need to increase the input voltage (maximum increase to 12V), you need to increase the resistance of the feedback resistor (package resistance is 120 ohms), otherwise the triode is easy to burn out. The feedback resistance is increased to approximately 150 Ω to 1.5 K Ω. Resistance should be adjusted from large to small. It should not be too small.
Rank No. #3
2 Pieces DC-DC 3V-4.2V 3.7V to 1500V-2000V 1800V High Voltage Generator Module Arc Pulse Boost Module Booster DC-DC Step Up Power Board
  • DC 3V-4.2V boost 2000V, pulse boost module.It can work continuously and the maximum discharge distance is about 1.5MM. Dimensions: 41x26x19mm/1.6x1.0x0.74inch.
  • Input voltage: 3V-4.2V;Input Current: Max 2A;No-load current: 130MA(at 4.2V);Output voltage: 2000V (low battery voltage, low output voltage); Output current: 0.5~1mA(the external parallel capacitor can increase the output current).
  • The output of 3V voltage input is about 1500V, the output of 3.7V input is about 1800V, and the output of 4.2V input is about 2000V. The output circuit is doubler rectifier. With high-voltage discharge capacitor, 2000V 223 (0.022uf). Note: This Module has a high voltage capacitor, the capacitor may be used after the remaining power. High voltage output, pay attention to safety when using.
  • This is a high-voltage, low-current, low-power boost module. If you want to increase the instantaneous discharge current, you can output a large capacity, high-voltage capacitor in parallel (recommended four air-conditioning compressors CBB65 capacitor, 450V series use, capacity size according to your needs to choose).
  • Usage: Popular science experiment, electronic instrument, negative ion generator, scientific small-scale production, etc. Note: The board has a high voltage capacitor, which may leave surplus electricity after use.High pressure danger, use need to pay attention to safety.
Rank No. #4
Miniature DC 3.6~6V to 20KV High Voltage Transformer Boost Step up Inverter, Arc Pulse Generator, Power Module, Black
  • 【Miniature Arc Pulse Booster】This high voltage generator is a finished module of transformer/booster for small scientific production
  • 【High Efficiency】The high voltage converter can output high voltage arc, small size and high efficiency
  • 【Widely Applications】This high voltage pulse generator can be used for high voltage experiment, teaching, and product development
  • 【Working Range】The input voltage of the arc generator is DC 3.6-6V and will output DC20KV high voltage
  • 【Application Principle】Two high voltage wires can light up paper, single high voltage wire can discharge to any metal quietly
Rank No. #5
DC 6-12V to 1000 kV High Voltage Pulse Generator Inverter Super Arc Pulse Ignition High Temperature Arc Igniter Module
  • 【simple operation】The peripheral circuit is simple, simply connect the switch and battery, and the discharge intensity is great.
  • 【 pulse generator】According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency.
  • 【500~1000KV output】This high voltage generator can produce 500~1000KV output.
  • 【DC 6V - 12V】The input voltage of dc generator is DC 6V to 12V and will output 1000kV high voltage.
  • 【wide applications】This pulse generator can be used as high school science experiments, electronic equipment, negative ion generator, high voltage source to use when making small science.
Rank No. #6
YWBL-WH High Voltage Generator Module DC 12V High Voltage Pulse Generator 60KV Super Arc Ignition Coil Module
  • ◇ MAIN FEATURE---The high voltage generator module is of shorter input wires, output wires are red and thicker; no need to distinguish positive or negative polarity
  • ◇ DC 6V TO 12V INPUT VOLTAGE---The input voltage is DC 6V to 12V and will output tens of thousands DC high voltage
  • ◇ HIGH EFFICIENCY---This high voltage generator module is the finished module of transformer for small scientific production, can output high voltage pulse current, small size and high efficiency
  • ◇ MAIN USAGE---The generator module can be used as high voltage power source in high school science experiment, electronic instrument, anion generator
  • ◇ SIMPLE PERIPHERAL CIRCUIT---The peripheral circuit is simple, simply connect the switch and battery, and the discharge intensity is great
Rank No. #7
High Voltage Pulse Generator, DC 6V-12V Boost Step-up Power Module High Voltage Generator 1000kV Super Electric Arc Module Input 2A~5A, Output 500KV~1000KV
  • ★【Parameter】: The input voltage is DC 6V to 12V and will output 1000kV high voltage. Input Current: 2A~5A (related to voltage), Output Voltage: About 500KV~1000KV, Input Cable Length: About 100mm(red is positive).
  • ★【Feature】: The module can output high voltage pulse current, small size and high efficiency.
  • ★【Scope of Application】: This module is the finished module of transformer for small scientific production. It can be used for negative-ion generator, electronic instrument, and science experiment.
  • ★【Advantage】: The peripheral circuit is simple, simply connect the switch and battery, and the discharge intensity is great.
  • ★【Note】: The way to judge if a battery capacity is enough to output maximum power is to measure the battery voltage when producing arc. It the measured voltage is about 6V, then it can output maximum power. Recommended battery capacity is above 2000mA, or above 4000mA if possible.
Rank No. #8
High Voltage Generator,DC6-12V High Voltage Pulse Generator 1000kV Super Electric Arc Module A Finished Module of High-Voltage Inverter Transformer/Booster for Scientific Small Production
  • [Excellent Performance] -- The module can output high voltage pulse current, small size and high efficiency
  • [Finished Module] -- This module is the finished module of transformer for small scientific production
  • [Working Voltage ] -- The input voltage is DC 6V to 12V and will output 1000kV high voltage
  • [Widely Used] -- It can be used for negative‑ion generator, electronic instrument, and science experiment
  • [Easy to Operate] -- The peripheral circuit is simple, simply connect the switch and battery, and the discharge intensity is great
Rank No. #10
DC4.8V~6V High Voltage Transformer 50kV-800kV Boost Step-up Inverter Arc Pulse Generator Power Module Black
  • This module is a finished module of transformer/booster for small scientific production
  • It can output high voltage arc, small size and high efficiency
  • The input voltage is DC4.8V-6V and will output 50kV-800kV high voltage
  • It can be used for high voltage experiment, teaching in high school or college
  • The peripheral circuit is simple, simply connect to switch and battery, and the discharge intensity is great
Rank No. #11
DC 3V-6V to 700kV 700000V High Voltage Generator Transformer Inverter Boost Step-up Power Pulsa Arc Generator Arc Pulse Ignition Module
  • [Function, High Temperature Arc Igniter]: The high voltage pulsa arc generator can generate high temperature and high frequency arc, can easily ignite combustible; With 3-6v high power, the pulsa arc generator instant ignite cigarette & paper, can work for 20 seconds continuously, and high frequency, good quality, easy to use
  • [Returns Guarantee, Enjoy Our Professional Service]: Excellent customer service brings you no worries after purchase; Please feel free to reach us if you have any question or dissatisfaction about the high voltage generator
  • [Power Requirements]: Input the power of 3-6v, 3.7-v lithium battery can be used in series, such as 18650 battery, idle cell phone battery (to remove the protection board, recommended capacity above 2000mAh) or -/Nimh battery pack, 4V or 12V Acid batteries(12V battery works best)
  • [Has Many Uses]: According to the coil principle, the high voltage module arc generator outputs high voltage pulse current, small volume and high efficiency, the high voltage generator transformer can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science
  • [Matters Needing Attention]: Avoid power on when No load; the test arc distance from the short to long experimental, the high voltage generator is prohibited exceed the maximum arcing distance(
SaleRank No. #13
Wixine 2Pcs DC 3V-5V Arc Generator High Voltage Boost Module DIY Kit Electronic Lighter
  • You will receive 2Pcs Arc Generator High Voltage Boost Module DIY Kit
  • Fine workmanship and good performance.
  • Small in size. Easy to use. Used to DIY electronic lighter.
  • Package Included: 2Pcs DC 3V-5V Arc Generator High Voltage Boost Module DIY Kit Electronic Lighter(If there are any problems with the product, please send us pictures.Tell us more details about this problem.)
  • Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.
Rank No. #14
WSDMAVIS 1 Set DC 12-24V High Voltage Arc Generator Tesla Coil ZVS Driver Board 60-300W Discharge Flyback Generate Long Arc Kit
  • It adopts two symmetrical original IRFP260 power field tubes, which can pass large current for a long time, has low internal resistance and reliable performance. The use of anti-static high-quality radiator greatly improves the stability and life.
  • Custom-made magnetic ring large inductance, super thick copper wire surround, neat workmanship, stable performance. The high-voltage cap has an insulating protective cover. Do not touch the metal in the middle with your hands directly. After the power is turned on, the two contacts will contact to produce a discharge arc.
  • The ZVS driver board can not only drive the high voltage package, but can also be used for Tesla coils, Jacob, ladders and Marx generators after modification, which can produce the same arc discharge effect. If it is used to make induction heating coils, it can be quenched and heated to melt metal; if it is used as a single coil, it is recommended to use a hollow copper tube and cool down with cold water to prevent the coil from melting.
  • Voltage DC12-24V, current 5-10A, working frequency 30-50kHz, secondary parameters: 5T + 5T, arc length: 1-5cm, arc length is proportional to voltage and current.
  • Note: Do not run under overvoltage and overcurrent conditions. The driver board is not suitable for induction heating. If it is used, it is recommended that the input voltage be below 15V. When used for induction heating or long-term use, a fan must be used for heat dissipation, otherwise it will accelerate the aging of the MOS tube or even burn out. When winding the induction coil, symmetrical double numbers must be wound on both sides.
Rank No. #15
DC 12V High Voltage Pulse Generator 60KV Super Arc Ignition Coil Module, for High Voltage Power Source in High School Science Experiment
  • 【Features】The high voltage module can output high voltage pulse current, small size and high efficiency. The peripheral circuit is simple. Only simply connecting the switch and battery, the discharge intensity is great
  • 【Wide Use】The high voltage module can be used as high voltage power source in high school science experiment, electronic instrument, anion generator
  • 【Input Voltage】The input voltage of this high voltage generator module is DC 6V to 12V and will output tens of thousands DC high voltage. Input wires are thin, shorter; output wires are red and thicker, no need to distinguish positive or negative polarity
  • 【Note】This high voltage generator module is the finished module of transformer for small scientific production. It has high power and inner heat is not easily dissipated, so it can not work for long time
  • 【Specifications】Size: 70*30*24mm, Input Voltage: 6V-12V DC, Input Current: 0.5A-1A, Input Cable Length: Approx. 26cm, Output Cable Length: Approx. 48cm, Arc Discharge Distance: 1.5cm/0.59" to 2cm/0.78"
Rank No. #16
800-1000 KV Ultra High Voltage Pulse Inverter Arc Generator Ignition Coil Module High Voltage Generator
  • Input Voltage: 3.7V—7.4V Input Current: 0.5A—2.5A
  • Output Voltage: 800KV-1000KV (please pay attention to safety when using) Output current: 0.5A—1A
  • Size: 88.5 x 26mm(LxD)
  • Based on the tesla coil principle, output high voltage pulse current with simple circuit design, easy to use
  • Ideal for students to study electrical experiment, do science experiment, etc
Rank No. #17
15KV High Voltage Arc Pulse Generator, 3.7V~4.2V Input 15KV Output High Voltage Pulse Igniter Coil Generator Module Disassembled Parts
  • 【Application】 - It can be used for anion generator, electronic instrument or scientific experiment.
  • 【Very Popular】 - There are 2 sets in disassembled pieces that are very popular with electronics enthusiasts.
  • 【Parameter】 - The input voltage is 3.7 V ~ 4.2 V DC and outputs a high voltage of 15 kV AC.
  • 【Features of high voltage generator】 - The module can output high voltage pulse current, small size and high efficiency.
  • 【High Temperature Arc】 - Issue a high temperature, high voltage arc that could easily ignite paper or plastic.
Rank No. #18
DC 3.6V/4.8V/6V/12V High Voltage Transformer 3kV-11kV Boost Step-up Inverter Arc Pulse Generator Power Module Black
  • This module is a finished module of high voltage negative-ion generator
  • It can output high voltage pulse current, small size and high efficiency
  • The input voltage is DC3.6V/4.8V/6V/12V and will output DC3kV-11kV high voltage
  • It can be used for fogger, electric gun salute, gas stove, etc
  • The peripheral circuit is simple, simply connect to switch and battery, and the discharge intensity is great
Rank No. #19
Music Tesla Coil Touchable Artificial Lightning Arc Generator Desktop Toy Divvlur Arc Plasma Wireless Transmission Science Teaching Experimental Modes TS10-MINI
  • ⭐【Product Features】Tesla coil can simulate the occurrence of lightning, and it will make a loud sound when working, which is produced by lightning penetrating the air, so there must be a sound when there is lightning. Please turn the first knob to the minimum when you use it, so as not to scare you.
  • ⭐【Scientific Experiment】Tesla coil can easily light up some inert rare gas lamps and display wireless power transmission, let's experience the magical scientific experiment together.
  • ⭐【Music Play】Connect the bluetooth Tesla Coil 10mini to play the square wave music provided in the manual, the sound quality of other ordinary music will be very noisy, for your convenience, we provide more than 100 kinds of square wave music. Please refer to the instruction manual.
  • ⭐【Size Description】3.78 x 3.78 x 1.29 inches/9.6-9.6-3.3cm, weighs about 2.42bs/1.1kg.
  • ⭐【Guarantee】Any questions about this product can be asked to us, we will reply within 24 hours.
Rank No. #20
High Voltage Generator, 2 Sets 15KV High Voltage Pulse Generator Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use
  • High Voltage Pulse Generator: The module can output high voltage pulse current, small size and high efficiency
  • Voltage: The input voltage is 3.7V~4.2V DC and will output 15kVAC high voltage
  • High Performance: Output high voltage high temperature arc that could easily ignite paper or plastic
  • Designed for: It can be used for anion generator, electronic instrument or science experiment
  • 2 Sets: There are 2 sets in disassembled parts, very popular among electronics enthusiasts

Last update on 2023-08-19 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Arc Generator?

Do you get stressed out thinking about shopping for a great Arc Generator? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Arc Generator, which is why we have assembled a comprehensive list of the greatest Arc Generator available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Arc Generator that you consider buying. Your questions might include the following:

  • Is it worth buying an Arc Generator?
  • What benefits are there with buying an Arc Generator?
  • What factors deserve consideration when shopping for an effective Arc Generator?
  • Why is it crucial to invest in any Arc Generator, much less the best one?
  • Which Arc Generator are good in the current market?
  • Where can you find information like this about Arc Generator?

We’re convinced that you likely have far more questions than just these regarding Arc Generator, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Arc Generator, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Arc Generator. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Arc Generator buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Arc Generator currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Arc Generator has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Arc Generator?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Arc Generator.
  5. Customer Ratings: Number ratings grade Arc Generator objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Arc Generator.
  7. Product Quality: You don’t always get what you pay for with an Arc Generator, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Arc Generator is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Arc Generator information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Arc Generator is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What do you need to know about an arc generator?

A: Arc Generator. a device for converting direct current power into high-frequency electromagnetic oscillations by means of an arc discharge through a gap that is connected in parallel with a circuit containing a capacitor and an induction coil. Oscillations are generated and maintained in the oscillatory circuit, which is made up…

Q: How does the Arc Pulse Generator work in Star Wars?

A: “…the Arc Generator’s energy pulse is drawn to the beskar alloy in the Mandalorians’ armor, superheating it and instantly vaporizing the target, and all the while, doing no harm to our Imperial stormtroopers.” Years before the early rebellion against the Galactic Empire, Sabine Wren was a cadet at the Imperial Academy on Mandalore.

Q: Why was the arc generator replaced by vacuum tubes?

A: Because of serious disadvantages, such as frequency instability of the oscillations, the arc generator was replaced by high-frequency machine generators and later by vacuum-tube generators. The Great Soviet Encyclopedia, 3rd Edition (1970-1979). © 2010 The Gale Group, Inc. All rights reserved. Want to thank TFD for its existence?

Q: Why was the Arc Pulse Generator called the Duchess?

A: The weapon was cruelly nicknamed “the Duchess” after the late pacifist Duchess Satine Kryze who ruled Mandalore during the Clone Wars. Wren developed the weapon to target beskar alloy used in Mandalorian armor and disintegrate the soldier inside.

Related Post: