The Best Arduino Laser Detector of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Arduino Laser Detector of 2023. Check our ranking below.

2,353 Reviews Scanned

Rank No. #1

Ximimark 5Pcs Laser Sensor Module Non-Modulator Tube Laser Receiver Detection Module Relay Switch 5V for Arduino

Supply voltage: 5V
Output: High level when there is laser irradiation, low level when there is no laser irradiation.
This sensor uses a non-modulated laser receiver. Please use it in a place where there is no light indoors. Sunlight or other lamps may interfere. It is recommended to use it in a dark environment.
Size: 1.52CM*2.22CM (1CM=0.393inch)
We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.

Rank No. #2

Acxico 2Sets Laser Sensor Module For Arduino AVR(KY-008 Laser Transmitter +Laser Receiver Sensor Module Non-modulator Tube)

Operating voltage: 5V
Source wavelength: 650 nm
Apply to: for Arduino AVR
Model: 1*Laser Receiver Sensor Module+ 1* KY-008 Laser Transmitter Module
Laser Receiver Sensor Module uses the non modulated laser receiver, please use in the room where without the light, the sunlight or other lamps and lanterns will interfere, suggested in the dark environment use.

SaleRank No. #3

ALAMSCN VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor Breakout VL53L0XV2 Laser Flight Distance Measurement Module I2C IIC for Arduino(Pack of 4)

The VL53L0 uses ST's FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained lidar system.
ST's VL53L0 module is simple and easy to use (6 valid pins), provides an I2C interface, is equipped with a full set of API drivers and technical documents, making system integration fast and simple. The module package supports the reflow soldering process, complies with the RoHS hazardous substance restriction standards, and is fully compatible with various glass covers and appearance designs.
Unlike traditional infrared proximity sensors, the color and reflected light of the target object will not affect the distance measurement results. But its effective range and accuracy largely depend on environmental conditions and target characteristics, such as reflectivity and size, and sensor configuration. (The accuracy of the sensor is specified as ±3% at the highest, and it is over ±10% under the next best conditions.)
The internal laser emits non-visible light with a wavelength of 940nm, which does not harm the eyes, eliminates the problem of distracting people from emitting red light with other infrared proximity sensors, and enhances the anti-interference performance of external light sources. The sensor's digital architecture and automatic compensation function make it still have a high performance in scenes with high ambient light intensity.
The sensing capability of VL53L0X can support various functions, including gesture sensing or proximity of various innovative user interfaces; wall detection, cliff detection, and collision detection of household appliances such as sweeping robots; bathroom products, such as faucets, soap dispensers, and Cell phones and flushers; other target applications include laptop user presence or power switch monitors, drones and Internet of Things (IoT) products.

SaleRank No. #4

Geekstory 5V Laser Receiver Sensor Detection Module Non-Modulator Tube for Arduino Geekstory(Pack of 5)

The sensor uses a non-modulated laser receiver.
Please use this sensor in dark environments or indoors where no light. Sunlight or other fixtures may interfere.
It output high level when receive laser signal, and low level when not.
If you buy 1, you will receive 5pcs sensor
If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will solve your problem in 24 hours.

SaleRank No. #5

VL53L0X Time-of-Flight Distance Sensor Flight Measurement ToF Laser Range Finder 940nm Laser Detect Module for Arduino (Pack of 2)

[Parameter]: Range length 2m, Range time 30ms, 20mW power, 3V-5V Voltage, I2C Interface, IIC Communication, VCSEL driver
[Chip]: VL53L0X, measurement results accurate to millimeters
[Laser]: Laser emits non-visible light with a wavelength of 940nm, does not harm eyes and enhances the anti-interference performance of external light source
[Application]: Gesture sensing or proximity detection of innovative user interfaces; Wall detection, Cliff detection & collision detection of home appliances; Sanitary products; Laptop user presence detection; Power switch monitoring; Drones; IOT

Rank No. #6

MengJie MJ-VL53-400 TOF10120 4-400cm Laser ranging Sensor Distance Module, UART Output 3.3-5V Time of Flight Arduino Raspberry pi, Laser Rangefinder Ranging Sensor Gyroscope

【Output&Power Consumption】High-precision distance measurement with TOF10120,up to 40mm-2000mm ; Output speed (0.2 ~50HZ); Voltage 3.3V~5V; Current<33mA
【Small But Sturdy】20mm X 13mm X 6.2mm; Play and plug; Built-in VL53L1 Chip; 2-layer PCB board technology, thinner, smaller and more reliable; Metal shield to prevent static interference.
【Various communications】Supports serial port protocol, modbus protocol, IIC protocol and , the default baud rate of serial port protocol is 9600
【Application】Parking detection; Drone avoids obstacles; Vehicle-road coordination; Intelligently identifyobjects within range, and so on.
【Packing&Service】1*MJ-VL53-400, 1* Dupont line ; Lifetime technical support; Provide software to view data; Sample codes for your reference

Rank No. #7

Stemedu Small TFmini-S Lidar Sensor Benewake 0.1-12m TOF Micro Laser Range Finder Module Lightweight Distance Detector Sensor with UART / I2C Interface for Drone for Arduino for Raspberry Pi Pixhawk

🚩 TFmini-S laser sensor is the improved version of TFmini, it is a single-point micro ranging module.
🚩 It is based on ToF principle and integrated with unique optical and electrical designs, stable, precise, high sensitivity and high-speed distance detection.
🚩 Operating Range : 0.1-12m, applicable voltage range : 4.5-6V, Communication interface : UART/I2C, please note: TFmini-s version is UART by default. If you need I2C, please switch by yourself. It is compatible with Raspberry Pi and Arduino.
🚩 FOV : 2°
🚩 Aapplication: drones, UAVs, Robots and industrial equipments. Traffic Monitoring, Obstacle detection Level measurement, Smart device, Security and obstacle avoidance, Distance measuring instrument

Rank No. #8

DEVMO 2PCS 5V Sensor Module Board Compatible with Ar-duino AVR PIC KY-008 Laser Transmitter Wave Length 650 nm

★Operating voltage: 5V
★Output wavelength 650 nm
★3 pins module
★With fixed bolt hole for easy installation
★Package Includes: 2PCS Sensor Module Board

Rank No. #9

HiLetgo VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout VL53L0X ToF Laser Range Finder for Arduino

Advantage: A time-of-flight ranging system integrated into a compact module
Strong point: A carrier for the VL53L0X
Accuracy: Range from ±3% at best to over ±10% in less optimal conditions
Maximum Sensoring Distance: 2m
Working Voltage: 2.6V - 5.5V

Rank No. #10

DEVMO Mini Laser Receiver Transmitter Sensor Module Board Non-Modulator Tube Compatible with Ar-duino

★Icstation 5V laser recevier sensor module relay switch for Ar-duino, it is a non-modulated laser receiver module, has two layers circuit board, have given room for a mounting hole.
★It's sensitive to ambient light, please keep the sensor in the dark environment. Or it can be tripped by ambient light, suggest shielding the sensor by a black tube if it is necessary in bright areas.
★Working voltage: 5V, module size: 1.52x2.22cm/0.6"x0.9". Package included: 5pcs laser recevier sensor modules. The sensor is bent for easier shipping, user can adjust it easily.
★Warm tips: Users need to have relevant electronic knowledge to test this module, due to some improper use will damage the module, such as input voltage is too high, power supply is unstable, polarity reversed.
★Package included: 1 x Laser Sensor Module

Rank No. #11

ACEIRMC 2pcs VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout VL53L0X ToF Laser Range Finder for Arduino (Black)

1.The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product.
2.The VL53L0 uses ST's FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained lidar system.
3.Ranging measurements are available through the sensor's I⊃2;C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output.
4.The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V. Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible.
5.A time-of-flight ranging system integrated into a compact module

Rank No. #12

DIYmall Benewake TFmini Plus Laser Level Distance Sensor Waterproof IP65 Lidar Range Finder UART Anti-dust 12m 1000Hz UART for Arduino Raspberry Pi STM32

Document link: http://en(dot)benewake(dot)com/support_data?catename=03c54a91-8f9a-409f-985d-37acc68f7bf4&supportid=aa1f432c-e06b-4e39-924a-7a78ac05714b
Feature: Operating range: 0.1m-12m, Range solution：5mm, FOV: 3.6 degree, Frame rate: 1-1000Hz(adjustable)
Waterproof IP65 and anti-dust
Interface: UART, I/O and IIC. Default is UART, you can send comment to set it to I/O or IIC
Application: industrial security, smart transportation, smart home, Smart Dressing Mirror, autonomous vehicles, Smart Logistics, UAV & Drone, volume detection system, Coal Volume Measuring

Rank No. #13

FainWan VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout VL53L0X ToF Laser Range Finder Compatible with Ar-duino Rasp-Berry Pi

Advantage: A time-of-flight ranging system integrated into a compact module
Strong point: A carrier for the VL53L0X
Accuracy: Range from ±3% at best to over ±10% in less optimal conditions
Maximum Sensoring Distance: 2m
Working Voltage: 2.6V - 5.5V

Rank No. #14

ElectronicNova TOF10120 Laser Range Sensor Module 10-180cm Distance Sensor RS232 Interface UART I2C IIC Output 3-5V for Arduino with Cable

TOF10120 Laser Range Sensor Module 10-180cm Distance Sensor RS232 Interface UART I2C IIC Output 3-5V for Arduino With Cable

Rank No. #15

DEVMO VL53L0X Time-of-Flight Distance Sensor Breakout GY-VL53L0XV2 (ToF) Laser Ranging Module I2C IIC Compatible with Ar-duino

★A time-of-flight ranging system integrated into a compact module
★Range from ±3% at best to over ±10% in less optimal conditions
★Maximum Sensoring Distance: 2m
★Working Voltage: 2.6V - 5.5V
★Package Included: 1PCS VL53L0X Module

Rank No. #16

Autonomous Vehicle Lidar: A Tutorial

Bhaskaran, Sreevatsan (Author)
English (Publication Language)
107 Pages - 12/31/2019 (Publication Date) - Independently published (Publisher)

SaleRank No. #17

Coliao 5pcs Laser Sensor Module Non-Modulator Tube Laser Receiver Module with 5pcs KY-008 650nm Laser Transmitter Module

Model: Laser Receiver Sensor Module+ KY-008 Laser Transmitter Module.
Operating voltage: 5V; KY-008 source wavelength:650 nm.
Output: High level when there is laser irradiation, low level when there is no laser irradiation.
Note:This sensor uses a non-modulated laser receiver. Please use it in a place where there is no light indoors. Sunlight or other lamps may interfere. It is recommended to use it in a dark environment.
Package Content:5pcs Laser Sensor Receiver Module with 5pcs KY-008 650nm Laser Transmitter Module.

Rank No. #18

Gikfun Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for Arduino (Pack of 3 Sets) EK8477

Note: The white smudge is not corrosion damage, it's flux, can wipe it off with a rag, does not affect the use of the module
This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program.
It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including Arduino/51/AVR/ARM
With signal indicating LED, easy to observe and debug.
Pin Definitions: (1) Output (2) Vcc (3) GND

Rank No. #19

Acxico 5Pcs 5V Sensor Module Board for Arduino AVR PIC KY-008 Laser Transmitter

Model: KY-008
Operating voltage: 5V
For use by experienced electronics technicians or Students
Package Included:5Pcs 5V Sensor Module Board For Arduino AVR PIC KY-008 Laser Transmitter(If there are any problems with the product, please send us pictures.Tell us more details about this problem.)
Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.

Rank No. #20

DAOKI 4PCS Laser Sensor Module Non-Modulator Tube Laser Receiver Module for Arduino with 4PCS KY-008 650nm Laser Transmitter Module, Dupont Cable

✅Operating voltage: 5V; KY-008 Output wavelength:650 nm
✅Output: High level when there is laser irradiation, low level when there is no laser irradiation.
✅Laser Sensor Size: 15 x 22mm / 0.59 x 0.86inch; KY-008 Sensor:15 x 24mm / 0.59 x 0.94inch
✅Note:This sensor uses a non-modulated laser receiver. Please use it in a place where there is no light indoors. Sunlight or other lamps may interfere. It is recommended to use it in a dark environment.
✅Package Content:4 x Laser Sensor Receiver Module, 4 x KY-008 650nm Laser Transmitter Module, 1 x 11.8" Female-Male Dupont Cables 25 PIN

Last update on 2023-07-29 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Arduino Laser Detector?

Do you get stressed out thinking about shopping for a great Arduino Laser Detector? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Arduino Laser Detector, which is why we have assembled a comprehensive list of the greatest Arduino Laser Detector available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Arduino Laser Detector that you consider buying. Your questions might include the following:

Is it worth buying an Arduino Laser Detector?
What benefits are there with buying an Arduino Laser Detector?
What factors deserve consideration when shopping for an effective Arduino Laser Detector?
Why is it crucial to invest in any Arduino Laser Detector, much less the best one?
Which Arduino Laser Detector are good in the current market?
Where can you find information like this about Arduino Laser Detector?

We’re convinced that you likely have far more questions than just these regarding Arduino Laser Detector, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Arduino Laser Detector, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Arduino Laser Detector. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Arduino Laser Detector buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Arduino Laser Detector currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Arduino Laser Detector has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Arduino Laser Detector?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Arduino Laser Detector.
Customer Ratings: Number ratings grade Arduino Laser Detector objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Arduino Laser Detector.
Product Quality: You don’t always get what you pay for with an Arduino Laser Detector, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Arduino Laser Detector is should be an indication of how long it will work out for you.

We always remember that maintaining Arduino Laser Detector information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Arduino Laser Detector is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Arduino Laser Detector of 2023 – Reviewed and Top Rated

How Do You Buy The Best Arduino Laser Detector?

Related Post: