Contents

The Best Audio-Technica At875R of 2023 – Reviewed and Top Rated

2,060 Reviews Scanned

Rank No. #1

Audio-Technica AT875R Line/Gradient Shotgun Condenser Microphone 9.5 x 5 x 2.75 inches

Designed for video production and broadcast (ENG/EFP) audio acquisition
Extremely short length (under 7 inch ) ideal for use with compact digital cameras
Provides the narrow acceptance angle desirable for long distance sound pickup
Excellent sound rejection from the sides and rear of mic
Tailored response minimizes camera and handling noise

SaleRank No. #2

Audio-Technica AT875R Line and Gradient Condenser Microphone(Renewed)

Designed for video production and broadcast (ENG/EFP) audio acquisition
Extremely short length (under 7") ideal for use with compact digital cameras
Provides the narrow acceptance angle desirable for long-distance sound picku
Excellent sound rejection from the sides and rear of mic
Tailored response minimizes camera and handling noise

Rank No. #3

Audio-Technica (2) AT875R Shotgun Condenser Microphones Ideal for Video Production and Broadcast Audio Acquisition

Features: Designed for video production and broadcast (ENG/EFP) audio acquisition. Extremely short length (under 7") ideal for use with compact digital cameras. Provides the narrow acceptance angle desirable for long-distance sound pickup. Excellent sound rejection from the sides and rear of mic
Tailored response minimizes camera and handling noise. Operates on phantom power only. RoHS compliantfree from all substances specified in the EU directive on hazardous substances. Details: ELEMENT: Fixed-charge back plate, permanently polarized condenser. POLAR PATTERN: Line + gradient
FREQUENCY RESPONSE: 90-20,000 Hz. OPEN CIRCUIT SENSITIVITY: 30 dB (31.6 mV) re 1V at 1 Pa. IMPEDANCE: 100 ohms. MAXIMUM INPUT SOUND LEVEL: 127 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical): 107 dB, 1 kHz at Max SPL. SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical. SWITCHES: On/off. WEIGHT: 80 g (2.8 oz). DIMENSIONS: 175.0 mm (6.89") long, // 21.0 mm (0.83") diameter. OUTPUT CONNECTOR: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; windscreen; soft protective pouch. AUDIO-TECHNICA CASE STYLE: SG4. Click Here To View The Specification Sheet (Link Opens In New Window)

Rank No. #4

Audio-Technica AT875R Line + Gradient Shotgun Condenser Microphone and Headphone Kit

Short Length: The AT875 measures only seven inches in length and is an ideal choice for use with small video cameras
Excellent Audio Rejection: Excellent off-axis audio rejection provides greater range and excellent fidelity in noisy environments
Smooth Audio Reproduction: The AT875 captures nuances and detail with great accuracy
Phantom Powered: The microphone is powered with 11 to 52V phantom power
Tailored Low Frequency Response: Camera noise, mechanical noise and handling noise is controlled and results better sound quality

Rank No. #5

Eggsnow Microphone Shock Mount Clip Universal Mic Holder Stand Anti Vibration for AKG D230 Senheisser ME66 Rode NTG-2 NTG-1 Audio-Technica AT-875R

【MATERIAL】Metal and Plastic
【WHAT YOU GET】1 x Mic shock mount and 4 x Rubber bands
【COMPATIBLE WITH】Flexible shock mounts kits for versatile use,with this set of Mic shock mount Fit Most shotgun microphone and thin condenser mic diameter from 2 to 4cm
【FEARTURES】This mic shock mount will greatly reduce microphone noisy cause by vibration,this mic shock mount is easily angled with its rubberized adjustable knob,quickly removed or set,shock mount can be aimed both horizontally or vertically with its adjustable rotating mount
【DETAILS】Mic shock mount has 5/8'' thread holes and an angle adjustment with locking knob for microphone stand, so you can mount it on all the standard microphone stands.

Rank No. #6

13cm Furry MIC Windshield Windscreen Compatible for Sony ECM-XM1 CG1 NV1 PS1 HVR HD1000U HXR-MC2000E MC2500 XLR-A2M K1M K2M CG50BP Audio-Technica AT875R Camcorder Microphone

Camcorder Microphone Furry Windscreen

Rank No. #7

Shock Mount for Shotgun Mic Interview Recording, BOYA BY-C04 Camera Microphone Shockmount & Hot Shoe Mount for Professional Shotgun Microphone Senheisser ME66 Rode NTG-2 NTG-1 Audio-Technica AT-875R

Greatly reduces microphone noise caused by vibration, handling, etc
Fits Shotgun Mics Measuring 19-25mm in Diameter
For Rode NTG-1, NTG-2, NTG-3, NTG-4
For Audio-Technica AT897, ATR6550, Sennheiser MKH-416, ME66/K6, MKE-600, Azden SGM-1X, Sony ECM-CG50 etc.
3/8” or 1/4” in thread

Rank No. #8

Audio Technica AT875R Line + Gradient Microphone, 6.9IN Long w/XLR Cable

Designed for video production and broadcast (ENG/EFP) audio acquisition
Excellent sound rejection from the sides and rear of mic
Extremely short length (under 7") ideal for use with compact digital cameras
Operates on phantom power only
Provides the narrow acceptance angle desirable for long-distance sound pickup

SaleRank No. #9

Logitech for Creators Blue Yeti USB Microphone for Gaming, Streaming, Podcasting, Twitch, YouTube, Discord, Recording for PC and Mac, 4 Polar Patterns, Studio Quality Sound, Plug & Play-Blackout

Custom three-capsule array: This professional USB mic produces clear, powerful, broadcast-quality sound for YouTube videos, Twitch game streaming, podcasting, Zoom meetings, music recording and more
Blue VOICE software: Elevate your streamings and recordings with clear broadcast vocal sound and entertain your audience with enhanced effects, advanced modulation and HD audio samples
Four pickup patterns: Flexible cardioid, omni, bidirectional, and stereo pickup patterns allow you to record in ways that would normally require multiple mics, for vocals, instruments and podcasts
Onboard audio controls: Headphone volume, pattern selection, instant mute, and mic gain put you in charge of every level of the audio recording and streaming process
Positionable design: Pivot the mic in relation to the sound source to optimize your sound quality thanks to the adjustable desktop stand and track your voice in real time with no-latency monitoring

Rank No. #10

Audio-Technica AT875R Line Gradient Shotgun Condenser Microphone with 10 Ft XLR Cable, Windscreen, Protective Pouch, Stand Clamp, Threaded Adapter, and 6Ave Cleaning Kit

Being less than 7 inches long, the AT875R is equally at home on a boompole or atop a camera. It uses an interference tube and a supercardioid polar pattern to yield focused on axis directionality while attenuating rear entry sound and rejecting sound at the sides.
With a balanced 3 pin XLR output and support for 11 to 52 VDC phantom powering, the AT875R is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built in preamps on many camcorders and cinema cameras.
The AT875R includes a mic clip for easy placement on a mic stand or boompole.
The AT875R also includes two rubber O-rings that expand the microphone's diameter to fit the larger mic holders found on many high-end cameras.
The AT875R has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners.

Rank No. #11

Movo BWS1000 Blimp Wind & Vibration Protection System for Shotgun Microphones - Features 12-point Internal Shockmount, Integrated XLR Cable, Furry Deadcat Windscreen & Grip Handle with Boom Attachment

PROFESSIONAL'S MUST-HAVE: Features a Blimp capsule, 12-point shock mount, & "Deadcat" windscreen for noise reduction, perfect for field interviews, professional production, and more
UNIVERSAL DESIGN: Fits most shotgun microphones up to 15" (38cm) long, including the Rode NTGs, Sennheiser MKH-416, Audio-Technica AT875R & More
1-YEAR WARRANTY: We’ve got your back! Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help
NOISE FREE: Its oversized zippered "deadcat" windscreen fits snugly over the blimp, further reducing wind and vibration noise by up to 40dB
EASY HANDLING: Has a rubberized grip handle and features 1/4" & 3/8" threads for boom pole or tripod attachment, perfect for run & gun audio capturing

Rank No. #12

Audio-Technica AT875R Line and Gradient Condenser Shotgun Microphone + XLR Cable

Short Length: The AT875 measures only seven inches in length and is an ideal choice for use with small video cameras
Excellent Audio Rejection: Excellent off-axis audio rejection provides greater range and excellent fidelity in noisy environments
Smooth Audio Reproduction: The AT875 captures nuances and detail with great accuracy
Phantom Powered: The microphone is powered with 11 to 52V phantom power
Tailored Low Frequency Response: Camera noise, mechanical noise and handling noise is controlled and results better sound quality

Rank No. #13

Audio-Technica ATR6550x Condenser Shotgun Microphone (ATR Series), Black

Offers crisp, intelligible pickup from close or far away
A switch on the microphone’s body allows you to shift easily between two range settings: "Wide" for close and medium distance and "Far" for long distance
“Wide” allows the mic to function as a standard cardioid condenser and focuses pickup on your desired sound source while blocking noise from the rear and sides
“Far” narrows the polar pattern to supercardioid for even greater directionality to pick up sound from a distance, while bypassing ambient noise
Designed for use with cameras, it comes with a camera shoe mount and has a permanently attached cable that plugs into a camera’s 3. 5 mm (1/8") mic input

Rank No. #14

YOUSHARES Deadcat Wind Muff for Rode NTG4,MKE 600 Shotgun Microphones, Audio-Technica AT875R Shotgun Microphones, Windscreen Up to 4.7" Long

Professional Windscreen - Furry wind screen fits perfectly on Rode NTG-4 , MKE 600 Shotgun Microphones and Audio-Technica AT875R condenser shotgun microphones for outdoor use.
Super Filter - The artificial fur outer and acoustic foam inner of furry windshield helps to reduces wind noise by 24dB to 41dB with minimum high frequency loss.
Outdoor Use - AT875 R furry dead cat wind muff minimizes wind noise and vocal plosives, perfect for recordings and travel blogs.
Perfect Design - Rubber base prevents any wind noise from entering the rear of the microphone pickup area.
Compatibility - Fits Shotgun Microphones up to 4.7 in (12cm) Long (e.g Sennheiser MKE600, AT 875R). Packing: 1 × Furry Windscreen Muff Cover.

Rank No. #15

Movo WS-S1000 Furry Outdoor Deadcat Windscreen for Shotgun Microphones up to 7-inch (18cm) Long - Fits Rode VideoMic, NTG-2, Sennheiser ME66, Audio-Technica AT-897 and More

Fits Shotgun Microphones up to 7-inches (18cm) Long
Large 50mm Diameter Opening Slips Over Existing Foam Windscreen for Extra Wind Protection
Reduces Wind Noise by up to 40dB
Minimizes noise and ambiance
1 Year Movo Warranty with USA-Based Support

Rank No. #16

Blue Microphone Baby Bottle XLRCardioid Condenser Microphone for Recording, Streaming, Podcasting, Gaming, Mic with Large Diaphragm Cardioid Capsule, Shockmount & Protective Case

Custom Blue Condenser Capsule - Delivers Blue’s legendary broadcast sound quality with depth and clarity
Classic Warmth and Presence – Baby Bottle SL delivers classic sound with a richly present midrange, smooth top end and neutral bottom
XLR Connection – Perfect for computer audio interfaces and mixers
High-Pass Filter - Increases clarity, reducing rumble from your room or desk
-20dB Pad - Keeps your stream free of distortion when things get intense

Rank No. #17

Geekria for Creators Foam Windscreen for 3/4'' (2 CM) Diameter Microphones, Antipop Foam Cover, Mic Wind Cover, Sponge Foam Filter Compatible with Audio-Technica AT875R (4¾ Inch / 2 Pack)

The windscreen helps mitigate background noise and vocal plosives, while adding protection to the microphone element.
The density of the specialty acoustic foam is optimized to help protect the microphone element from air bursts without muffling the sound.
The foam filter is hypoallergenic and helps prevent moisture and dirt from damaging your microphone.
The windscreen accessories are designed to compatible with Sennheiser MKE 600, Audio-Technica AT875R, Sony ECM-673, ECM-VG1, ECM-674, ECM XM1, ECM CG1, ECM PS1, HVR HD1000U, HXR MC2000E, HXR-MC2500, Vidpro XM-55 mic cover.
Package content: 2 x foam windscreen.

Rank No. #18

Polaroid Microphone Shock Mount for The Audio-Technica PRO24CM, AT875R, AT897, ATR-6550, ATR-6250, ATR-3350 Microphones

Simple, Yet Highly Efficent Design
Accommodates Tubular microphone bodies up to 1 1/4" in diameter
Mounts Via Metal Hot Shoe or Via Thread (1/4 20, 3/8)
Extra Suspension Bands Included
Cam be aimed Both Horizontally or Vertically with its Adjustable Rotating Mount

Rank No. #19

BOYA XLR Microphone, Shotgun Microphone BY-BM6060 with Shockmount Windscreen Mic for Camera DSLR External Condenser Professional Microphones for Video Interview ENG Film

【Super-Cardioid Shotgun Microphone】Featuring a super-cardioid capsule and extended length, it captures accurate directional sound from a narrower pick-up areas, which can highlight the forward target sound source and reduces the side and rear sounds effectively.
【Low-Cut Filter Function】BY-BM6060 has switchable high-pass filter control, so if there is low frequency noise from air conditioning or traffic while recording, users can switch to low-cut mode to eliminate these noises.
【Two Types of Power Supply】BY-BM6060 adopts 3-pin XLR audio output interface and supports 24-48V phantom power supply, when the device cannot provide phantom power, it also supports one AA five batteries power supply.
【Professional Condenser Microphone】BY-BM6060 is designed with alloy-aluminum body construction, which is solid and prevents radio-frequency interference.It widely applied in various occasions, interview，films, TV programs to documentaries etc.
【Microphone packing list】 1*Shock mount; 1*Foam windscreen; 1*Fur windshield; 1*Zipper bag; 1*User Manual

Rank No. #20

POP Windproof cover Compatible for SYNCO MIC-D1 D2 Deity S-Mic 2 V-Mic D3 Audio-Technica AT875R AT897 / BOYA PVM1000 Pro Shotgun Mic

Compatible for Emiral Comica CVM-MF2 DSLR Interview Sony ECM-XM1 ECM-CG1 ECM-NV1 ECM-PS1 HVR HD1000U HXR-MC2000E MC2500 A1E A1U V1U Z7U Z7P DSR-370 250 600 Camcorder Rode NTG1 NTG2 NTG3B NTG4 Plus ,Nikon/Canon Camera/DV Camcorder,Smartphone Camera Video Microphone Kit
Provides additional protection for the microphone capsule against any wind noise or plosives
Dimensions: 150mmh x 40mmw x 40mmd ,Inner diameter: 18mm
Suitable for Shotgun Video Microphone: 18~25mm
Package : 1PCS

Last update on 2023-08-02 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Audio-Technica At875R?

Do you get stressed out thinking about shopping for a great Audio-Technica At875R? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Audio-Technica At875R, which is why we have assembled a comprehensive list of the greatest Audio-Technica At875R available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Audio-Technica At875R that you consider buying. Your questions might include the following:

Is it worth buying an Audio-Technica At875R?
What benefits are there with buying an Audio-Technica At875R?
What factors deserve consideration when shopping for an effective Audio-Technica At875R?
Why is it crucial to invest in any Audio-Technica At875R, much less the best one?
Which Audio-Technica At875R are good in the current market?
Where can you find information like this about Audio-Technica At875R?

We’re convinced that you likely have far more questions than just these regarding Audio-Technica At875R, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Audio-Technica At875R, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Audio-Technica At875R. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Audio-Technica At875R buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Audio-Technica At875R currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Audio-Technica At875R has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Audio-Technica At875R?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Audio-Technica At875R.
Customer Ratings: Number ratings grade Audio-Technica At875R objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Audio-Technica At875R.
Product Quality: You don’t always get what you pay for with an Audio-Technica At875R, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Audio-Technica At875R is should be an indication of how long it will work out for you.

We always remember that maintaining Audio-Technica At875R information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Audio-Technica At875R is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Where to mount an Audio Technica at875r shotgun mic?

A: The AT875R includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the AT875R in the Audio-Technica AT8415 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic.

Q: Can a beachtek at875r be used as a microphone?

A: Yes, the AT875R microphone can be used with the Beachtek DXA-Micro-Pro to record audio into a camera. The DXA-Micro-Pro can be attached on top of the camera in the shoe mount or mounted below in the camera’s tripod socket. The clip that is included with the microphone is used to attach the mic to a mic stand.

Q: Is the at875r line and gradient a good sound?

A: The AT875R has a great response, giving a clean, rich tone to the audio and doing a decent job of off-axis rejection. It is a line-and-gradient pick up pattern, as opposed to a lobar, meaning it doesn’t completely reject off-axis sound but rather has a varying frequency response to make the off-axis sound that does get picked up sound more natural.

Q: What kind of microphone does Audio Technica use?

A: Audio-Technica’ s AT875R is designed for video production and broadcast (ENG/EFP) audio acquisition. Audio-Technica’ s shortest shotgun microphone, it mounts conveniently on a DV camcorder without adding noticeable heft, and is ideal for use with compact digital cameras.