The Best Automatic Light Switch Sensor of 2020 – Reviewed and Top Rated

2,240 Reviews Scanned

Rank No. #1
Lutron Maestro Motion Sensor Switch, No Neutral Required, 250 Watts, Single-Pole, MS-OPS2-WH, White
  • Automatically turns the lights on when you enter the room and off when you leave
  • Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently
  • Optional: senses daylight so lights do not turn on when there is enough natural light in the room
  • Programmable time out of lights 1, 5, 15 or 30 minutes
  • Works with all bulb types; up to 250 Watt incandescent, halogen, electronic low voltage 200 Watt magnetic low voltage 150 Watt CFL/LED 2 Amp ballasts
Rank No. #2
TOPGREENER in-Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, 4A, 500W, Single Pole, Neutral Wire Required, TSOS5-W, White, 2 Pack
  • 2-pack motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room
  • AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
  • Max Sensor Coverage Area 707 sq ft, 180º Field of View. Adjustable range and sensitivity from 30% to 100%
  • Occupancy sensor light switch features variable time delay from 15 sec (test mode) to 30 min
  • PLEASE CHECK WITH A QUALIFIED ELECTRICIAN TO DETERMINE IF YOU HAVE THE PROPER WIRING*
SaleRank No. #3
Leviton IPS02-1LW Decora Motion Sensor In-Wall Switch, Auto-On, 2.5A, Single Pole, White
  • Automatic ON/Automatic OFF provides 180 Degree field of view and 900 square feet of coverage
  • 300W Incandescent / Halogen, 150W LED / CFL, 200VA Fluorescent, 1/6HP Motor loads
  • Fits in standard wallbox and replaces single pole wall switch, no Neutral wire required for installation but ground wire is required
  • Five year limited warranty
Rank No. #4
TOPGREENER TDOS5-W-2PCS Motion Detector Sensor Light Switch, Occupancy Vacancy Modes, 4A, 500W 1/8HP, Wall Plates Included, Neutral Wire Required, TDOS5, White, (Pack of 2)
  • 2-pack motion sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room
  • Sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements
  • Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs
  • Light switch sensor features adjustable settings; variable time delay from 15 sec (Test) to 30 min; adjustable range
  • NEUTRAL WIRE REQUIRED, 314 square feet coverage, 180-degree field of view; 120VAC, 500W incandescent/halogen, 250W CFL/LED, 1/8HP motor; single pole only; 2x wall plates included; CA Title 20 & 24 compliant; UL listed; 1-year
Rank No. #5
TOPGREENER Motion Sensor Light Switch, PIR Sensor Switch, Occupancy Sensor Light Switch, Motion Sensor Wall Switch, 500W 1/8HP, Neutral Wire Required, Single Pole, TDOS5, White
  • Sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room
  • Motion sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements
  • Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs
  • Light switch sensor features adjustable settings; variable time delay from 15 sec (Test) to 30 min; adjustable range
  • NEUTRAL WIRE REQUIRED, 314 square feet coverage, 180-degree field of view; 120VAC, 500W incandescent/halogen, 250W CFL/LED, 1/8HP motor; single pole only; wall plate included; CA Title 20 & 24 compliant; UL listed; 1-year
SaleRank No. #6
Lutron MS-OPS5M-WH Maestro Sensor switch, 5A, No Neutral Required, Single-Pole or Multi-Location MS-OPS5MH-WH, White
  • Automatically turn lights on and off based on room occupancy
  • Uses Advanced XCT sensing technology, offering the most reliable on/off performance with up to 900 square feet coverage
  • Works with all bulb types
  • Up to 600 W incandescent, halogen, electronic low voltage; 450 W magnetic low voltage; 360 W CFL/ LED, 5 amp ballasts; 3 amp fans
  • Requires ground wire
Rank No. #7
Maxxima Occupancy Vacancy Motion Sensor PIR Wall Switch, Wall Plate Included
  • Automatic ON /OFF and Manual ON/Automatic OFF operation
  • 180° PIR Wall Switch, Switch features a green LED backlight, Wall Plate, Wire Nuts Included
  • Adjustable time delay from 1 Minute to 30 minutes
  • Adjustable sensitivity, Adjustable Light level sensing - Neutral Wire Required
  • Max Load: 800W@120V, 1200W@277V, 1/6 HP, No Minimum load required - UL Listed, Indoor Use Only, Incandescent, Electronic Ballast Fluorescent, Compact-fluorescent(CFL), Magnetic Low-voltage(MLV) & Electronic Low-Voltage(ELV) Compatible
Rank No. #8
LIT-PaTH PIR Motion Sensor Light Switch Wall Switch for Indoor Use – Vacancy & Occupancy Modes, NEUTRAL Wire Required, 3 Way, UL and Title 24 Rated, 2-Pack (White)
  • NEUTRAL WIRE REQUIRED: This motion sensor switch need neutral wire. Please review your wiring setup prior to purchase.
  • Single Pole or 3-Way available. If you need 3-way function, you need to connect all 5 wires. If you do not need 3-way function, please do not connect the blue wire, just connect other 4 wires. Lights will flash if not correctly connected. If you have any doubt, please consult with a licensed electrician.
  • MAKE YOUR LIFE EASY: (1) The motion sensor covers 180°, so all motion is detected. (2) Adjustable sensitivity (3) Light level sensing (4) Automatic ON /OFF and Manual ON/Automatic OFF operation, Adjustable time delay from 15sec-1min-5mins-15mins-30mins
  • SECURITY & SAFETY: Making sure lights automatically turn on allow occupants to see where they are going, improves visibility in an otherwise dark room, and helps prevent accidents. PIR motion sensors turn lights on, allowing security cameras to capture clearer footage of your home or office.
  • 3 YEARS WARRANTY: New replacement or refund will be provided to you if they fail under 3 YEARS WARRANTY.
SaleRank No. #9
Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White
  • Convenient push-button provides manual on/off light switching at any time
  • 180-degree field of view provides approximately 2,100 square feet of coverage
  • Segmented Fresnel lens provides optimum sensitivity and performance
  • Horizontal field of view may be adjusted between 180 degrees and 32 degrees of arc
  • Ambient light override can be set to prevent activation if sufficient ambient light is available
Rank No. #10
Sensky SK037 3-12M 360 Degree Ceiling Occupancy Sensor Motion Sensor Light Switch High Sensitive PIR Motion Sensor Switch (110V-240VAC)
  • 【SUPER OCCUPANCY SENSOR】 - 3 detectors for triple overlapping coverage to catch even small movements.
  • 【LIGHT SENSOR ADJUSTABLE】 - 3LUX~2000LUX adjustable, the ceiling occupancy sensor can be adjusted to both work in day and night, or only work at night.
  • 【TIME DELAY ADJUSTABLE】 - 10sec-7min adjustable, Time-Delay is added continually, when the ceiling motion sensor receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
  • 【DETECTION RANGE ADJUSTABLE】 - 3-12m adjustable, it can be adjusted according to your demand. The ceiling occupancy sensor both fits for small room and large room.
  • 【PIR MOTION SENSOR】 - Working by detecting human movement(or heat source), the motion sensor switch is widely used on LED light, compact fluorescent lamp, incandescent lamp, ceiling light, exhaust fan...

Last update on 2020-05-09 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Automatic Light Switch Sensor?

Do you get stressed out thinking about shopping for a great Automatic Light Switch Sensor? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Automatic Light Switch Sensor, which is why we have assembled a comprehensive list of the greatest Automatic Light Switch Sensor available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Automatic Light Switch Sensor that you consider buying. Your questions might include the following:

  • Is it worth buying an Automatic Light Switch Sensor?
  • What benefits are there with buying an Automatic Light Switch Sensor?
  • What factors deserve consideration when shopping for an effective Automatic Light Switch Sensor?
  • Why is it crucial to invest in any Automatic Light Switch Sensor, much less the best one?
  • Which Automatic Light Switch Sensor are good in the current market?
  • Where can you find information like this about Automatic Light Switch Sensor?

We’re convinced that you likely have far more questions than just these regarding Automatic Light Switch Sensor, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Automatic Light Switch Sensor, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Automatic Light Switch Sensor. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Automatic Light Switch Sensor buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Automatic Light Switch Sensor currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Automatic Light Switch Sensor has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Automatic Light Switch Sensor?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Automatic Light Switch Sensor.
  5. Customer Ratings: Number ratings grade Automatic Light Switch Sensor objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Automatic Light Switch Sensor.
  7. Product Quality: You don’t always get what you pay for with an Automatic Light Switch Sensor, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Automatic Light Switch Sensor is should be an indication of how long it will work out for you.

We always remember that maintaining Automatic Light Switch Sensor information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Automatic Light Switch Sensor is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Leave a Reply