20 Best Automatic Plasma Cutter of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Automatic Plasma Cutter of 2023. Check our ranking below.

2,853 Reviews Scanned

Rank No. #1

ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY

【EASY TO CUT, POWERFUL PERFORMANCE】Automatic dual-voltage 110/220V. With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 20-40psi when connecting 110V, the recommended psi is between 30-60psi when connecting 220V.
【EASY TO ASSEMBLE】With a plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 30 seconds and you can start cutting.
【PORTABLE & LIGHTWEIGHT】This plasma cutter machine only weighs 13 pounds, easy to carry. It's also tiny and light enough to move with strap in any workplace(strap included).
【ADVANCED DIGITAL TECHNOLOGY】You can adjust the post-flow time from 5-15 seconds to have a clean cut. Also could select 2T/4T to have a comfortable working experience. The exclusive Large LED design provides you with an accurate data display and helps you read all data easier and more clearly without taking off your helmet.
【SAFETY & DURABLE】 ARCCAPTAIN welder machine have passed a variety of professional tests and certifications including TÜV and ANSI standards before leaving our factory.

Rank No. #2

YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Large LED Digital Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Plasma Cutting Machine CUT-55DS PRO NEW

[NON-HF] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
[DIGITAL DISPLAY] The latest digital display screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to view the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. There will be an error code system on the screen if there is a problem with the machine.
[POWERFUL CUT] CUT-55DS PRO adopts the international leading MCU intelligent digital control technology, all the main components are realized by software. CLEAN CUT: 1/3''@110V 1/2''@220V // MAX CUT: 1/2''@110V 4/5''@220V.
[PT/2T/4T FUNCTION] Post time/post flow function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
[NON-TOUCH PILOT ARC] The IPT40 plasma cutting torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.

Rank No. #3

PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine, Premium and Rugged Plasma Cutter Kit, Automatic Dual Voltage 110V/220V AC with Plasma Torch, 1/2" Clean Cut, CUT50D

Rank No. #4

GZ GUOZHI Plasma Cutter, 50 Amp Air Inverter Plasma Cutter, 110V/220V Dual Voltage Digital Display IGBT Inverter Plasma Cutting Machine with 2T/4T/TEST Function

🎁GZ GUOZHI CUT 50 It is the perfect gift for Father, Husband, Friends, DIYer.
【Advanced Technology 】: 20A-50A current adjustment,90V-260V wide-voltage design,unafraid of the voltage fluctuation, 110V/220V dual-voltage automatic conversion. Maximum Cutting Thickness is 1/2 ", ideal clean cutting thickness is 2/5 ". High cutting speed, smooth cutting section and no polish demands.
【Set Up Within 1 Minute】: 1/4 inch industrial D-type plug, can easily and quickly connect to the air compressor, the users do not need to install the air pressure regulator. The whole machine can be setup quickly within 1 min.
【Safety Guarantee】: This Plasma Cutter Machine with over-heating and over-current protection functions, with excellent and reliable quality, use more safety. 2T/4T/TEST function,easy to operation.
【Portable & Lightweight】: We have made a major upgrade to the size and weight of the machine. Compared to other similar products, our CUT-50 is lightweight and small, making it easy to use even in tight spaces.

SaleRank No. #5

GZ GUOZHI Plasma Cutter, 45 Amp Air Inverter Plasma Cutter, 110V/220V Dual Voltage Digital Display IGBT Inverter Plasma Cutting Machine with 2T/4T/TEST, Automatic Drainage System

【Advanced Technology】: GZ GUOZHI 45 Amp Cutter is advanced high frequency 50/60Hz and IGBT Inverter technology. The cutting torch need to touch metal get arc starting.This cutter also can work normally at minus 20 degree.
【Cutting Thickness 】: Plasma Cutter is dual-voltage 110V/220V automatic conversion.20A-45A current adjustment,90V-260V wide-voltage design,unafraid of the voltage fluctuation. Maximum Cutting Thickness is 1/2 ", ideal clean cutting thickness is 2/5 ". High cutting speed, smooth cutting section and no polish demands.
【Easy Operate & Safety Guarantee】: This Cutting machine is equipped with automatic drainage function.You can adjust the post-flow time from 5-15 seconds to have a clean cut,it can protect the electrode and nozzle.2T/4T/TEST function,easy to operation. This Cutter with over-heating and over-current protection functions, use more safety.
【Set Up Within 1 Minute】: MNPT 1/4 inch industrial D-type couple, can easily and quickly connect to the air compressor,making it more convenient and easier for the users to use,the users do not need to install the air pressure regulator. The whole machine can be setup quickly within 1 min.
【2-Years Warranty & Package Include】: We provide 30-Day Money Back Guarantee and 2-Years Warranty for you. Package included:PT-31 13-feet Plasma torch Gun Assembly,10-feet 500A work clamp assembly, etc.The use of high-quality accessories,durable and not easy to damage.

Rank No. #6

bestarc Plasma Cutter, Pilot Arc BTC500DP 2nd Generation 50Amps Dual Voltage 110/220V Plasma Cutting Machine (BTC500DP 110/220)

[Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
[Dual-Voltage 110/220V]: Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
[Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel，you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.
[Post Time Function]: BTC500DP with post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.
[Cutting Thickness]: BTC500DP is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.

Rank No. #7

YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

[NON-TOUCH PILOT ARC] Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
[BUILT-IN POST FLOW] When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
[POWERFUL CUTTING ABILITY] 20-55 output, ideal clean cut: 3/10''@110V,1/2''@220V, max cut: 3/5''@110V,4/5''@220V. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
[LIGHTWEIGHT AND PORTABLE] Allows for connection to 110 or 220 volt receptacles without tools, Portable in the shop or at the job site—at 11.55lb, the shoulder strap allows the end user to easily move from location to location.
[ADDED SAFETY] Certificated by ETL, Automatic compensation for voltage fluctuation, over current protection, over load protection, temperature control. Note:Due to the inner structure, the pressure gauge may only read about 30psi, which is the normal phenomenom and it do not affect the whole operation.

Rank No. #8

AIXZGLOBAL 45A Plasma Cutter, Non-HF Non-Touch Pilot Arc 110/220V Plasma Cutting Machine with Digital Display IGBT Inverter 16mm Max Cut

✅【NON-TOUCH PILOT ARC】: The AIXZGLOBAL plasma cutter features a low-frequency non-touch arc starting mode. The torch head effectively cuts rough, rusty surfaces without touching the metal and produces minimal slag, improving cut quality and extending consumable life.
✅【LOW-FREQUENCY START】: AIC45 plasma cutter machine is equipped with an XT45 low-frequency cutting gun, which makes it easier to start the arc, has a higher cutting success rate, has no interference with the power supply and is harmless to human health.
✅【CUTTING TECHNOLOGY】: The plasma cutter ideals cut cleanliness of 10mm, maximum 16mm severance thickness, cut stainless steel, carbon steel, aluminum, copper, titanium and other metal materials with fast cutting speeds and smooth cutting surfaces.
✅【IGBT & 2T/4T】: This dual voltage plasma cutting equipment adopts stable and mature IGBT inverter technology. DC output current 15-45A, 50/60HZ, duty cycle 60%, LCD digital display can easily control the voltage and current, and you can select the 2T/4T mode through the display to meet your needs and choices.
✅【LIGHTWEUGHT & APPLICABLE】: Our upgraded plasma cutter is compact, shaped and lightweight with an easy carry handle. Weight 11.2LBS. Dimensions: 28x12x25cm It is suitable for home DIY hobby, repair work, metal processing, site work, etc.

SaleRank No. #9

Plasma Cutter, CUT50 55Amp 110V/220V Dual Voltage IGBT Cutting Machine

🔔[2024 Upgraded Model Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 20-55A, Under 220V current display is 20-55A, the maximum cutting thickness is recommended to be 15mm @ 35A 110V, 50PSI; 20mm@55A 220V, 60 PSI.
🔔[IGBT Function]: S7 plasma cutter has the pilot arc function. Efficiently cut through rough, painted, and rusty surfaces and produces minimal slag.Suitable cutting for stainless steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc.
🔔[Sensor of Air Pressure & Air Compressor]:Inside of Machine Have Sensor of Air Pressure, User Can Adjust The Air Pressure Through The Regulator,Users Can Use It After Connecting To The Air Compressor.
🔔[Includes]:Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.Machine easy setup and lifetime technical support.

Rank No. #10

SSIMDER Plasma Cutter 50Amp Plasma Cutter Machine with Dual Voltage 110V/220V Non-Pilot Arc 1/2 Inch Clean Cut Plasma Cutting Equipment with High Frequency Easy Metal Cutter LCD Display IGBT Inverter

★【Powerful Cutting Ability】The CUT 50 Plasma Cutter machine can achieve an ideal clean cut of 1/2" (10mm) and a maximum severance cut of up to 3/4" (20mm). This Plasma Cutter machine's effectiveness in cutting through rough, painted, and rusted surfaces are pretty good, improving work efficiency, and its suitability for various materials.
★【Easy to Operate Plasma Cutter 】SSIMDER CUT50 Plasma Cutter has the convenience of dual voltage control for seamless switching between 110V and 220V. Plasma Cutting equipment is ease of use without the need for maintaining a specific arc distance, allowing users to control cutting quality and speed by adjusting the cutting depth and speed.
★ 【IGBT technical】The Plasma Cutting Equipment has overvoltage, overcurrent as well as overheat protection and uses advanced IGBT technology to cut all metals, making the Plasma Cutter machine more stable and safer. It also has automatic cooling fans and vents to effectively discharge the heat generated, which can better protect the machine and extend the service life of the cutter.
★【Safety Guarantee】SSIMDER CUT 50 portable Plasma Cutter's large LED design provides you with accurate data display, helping you to read all data more easily and clearly without taking off your helmet. Energy saving and noiseless operation, as well as its dual voltage function and sturdy handle make the Plasma Cutter portable and suitable for outdoor working environment.
★ 【Professional Plasma Cutter Machine】SSIMDER is a professional manufacturer of Plasma Cutter Machine providing high-quality Plasma Cutter Consumables and Plasma Cutter Accessories for a long time. We aim to provide a better Plasma Cutter Machine and make Plasma Cutting easier. If you have any questions, feel free to contact us

Rank No. #11

ARCCAPTAIN Plasma Cutter, 45Amp Cutter Machine, 110V/220V Dual Voltage Digital Display IGBT Inverter Plasma Cutting Machine with 2T/4T Function

POWERFUL CUTTING ABILITY: ARCCAPTAIN 45A plasma cutting machine adopts IGBT inverter current technology and built-in MCU to achieve precise control of output current. Maximum current 45 Amps, supports dual voltage 110V/220V (automatically matches according to output power), achieves 5/16 inch clean cutting and 1/2 inch maximum cutting thickness. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc.
SIMPLE & SAFE: 2 steps to start cutting - choose 2T/4T mode and adjust the current.This plasma cutter machine is equipped with a post-flow function, critical 5S golden post-flow time ensures clean cuts, protects electrodes and nozzles, while conserving gas resources and work time. ARRCAPTAIN plasma welder also has built-in overheating and overload protection, more suitable and safer for beginners.
COMPACT DESIGN: Only 9.36 pounds. The upgraded plasma cutter boasts a compact design, sleek appearance, and lightweight construction, making it effortless to transport to any workspace. We also give away a shoulder strap to make it easier for users to move the equipment between different work areas.
AIR FILTER REGULATOR: The plasma cutter machine is equipped with an air pressure sensor, and users can adjust the air pressure through the regulator. The air filter is installed at the back of the machine, using a 1/4" NPT joint for better airtightness and easier operation. The recommended air compressor pressure value is within the range of 60PSI, 5.3CFM.
Trusted Quality and Service: ARCCAPTAIN plasma cutter has 2-Year support. Every single of ARCCAPTAIN plasma cutter machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards.

SaleRank No. #12

Reboot RBC6000DL Plasma Cutter, 60 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 4/5 inch Severance Cut, Dual Voltage 110/120V or 220/240V with Consumable Set Digital Display

【60A NON-TOUCH PILOT ARC PLASMA CUTTER】Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
【POWERFUL CUTTING PERFORMANCE】Automatic dual-voltage 120/240V. With advanced IGBT inverter technology, 10-60A DC output, 5/8” ideal clean cut and 4/5” maximum severance cut under 220/240V. 10-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
【VOLTAGE CONVERSION】 The power cord plug installed on the machine is a 110V US standard plug. A conversion cord is included to easily convert 110V to 220V or 120V to 240V for use in your home, shop, or factory. 30A circuit breakers are recommended for 240V and 60A circuit breakers are recommended for 120V.
【BUY WITH CONFIDENCE FROM Reboot】Reboot offer a 30 day money-back guarantee and 1-year new replacement warranty covered by our US based lifetime technical support. To avail the warranty, please contact us to activate the warranty when you receive the goods.
【UPGRADED FOR PORTABILITY AND LIGHTWEIGHT, EASY TO ASSEMBLE】This plasma cutter machine only weighs 9 pounds, easy to carry. The pre-installed quick air coupling, only takes 30 seconds and you can start cutting. Significantly save your preparation time.

Rank No. #13

FLARING Plasma Cutter,65Amps Plasma Cutter Machine with 120V 240V Dual Voltage,Digital IGBT Inverter Power Plasma Cutters 4/5" (20 mm) Max severance cut 1/2"(12mm) Clean Cut Upgrade FC650D PRO

【POWERFUL PERFORMANCE】With advanced IGBT inverter technology, the maximum severance cut can reach up to 4/5" (20 mm), 1/2" (12mm) ideal clean cut, 60% duty cycle. The recommended current is 65A, the recommended psi is between 30-50psi (0.21-0.35Mpa) when connecting 120V, the recommended psi is between 30-70psi (0.21-0.49Mpa) when connecting 240V.
【DUAL VOLTAGE】 Automatic dual-voltage 120/240V. It allows the machine to run directly on 240 V 50/60 Hz power or on 120 V 50/60 Hz with the use of a power adapter, without removing the covers to relink the power source. Suitable home DIY and industrial projects.
【WIDE CUTTING ABILITY】This 65 amp professional plasma cutter is suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials. It is very friendly to both DIY, beginner cutter, and professional workers.
【PORTABLE & LIGHTWEIGHT】Portable in the shop or at the job site, this plasma cutter machine only weighs 8.8 pounds, easy to carry. Package weighs 17 pounds. It allows the end user to easily move from location to location.
【STABLE and DURABLE】FC650D PRO provides maximum customer convenience by automatically controlling the arc when cutting expanded metal or multiple pieces of metal. When cutting expanded metal, the ignition arc quickly switches as needed and provides maximum power for cutting thicker metal - all automatically No manual re-triggering is required, reducing user hand fatigue.

SaleRank No. #14

LOTOS LTP5000D Plasma Cutter, 2024 Upgraded 5/8" 16mm Clean Cut 3/4" 20mm Severance Cut 50A Non-Touch Pilot Arc Plasma Metal Cutter Machine, Plasma Cutting Equipment, Dual Voltage 120V or 240V, Brown

★ 𝟐𝟎𝟐𝟒 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐌𝐨𝐝𝐞𝐥: 5/8-inch (16mm) Clean Cut, 3/4-inch (20mm) Severance Cut, Newly Upgraded PC board, Remarkable 25% Increase in Cutting Power compared to other standard 50-amp plasma cutters.
★ 𝐑𝐞𝐦𝐚𝐫𝐤𝐚𝐛𝐥𝐞 𝟐𝟓% 𝐈𝐧𝐜𝐫𝐞𝐚𝐬𝐞 𝐢𝐧 𝐂𝐮𝐭𝐭𝐢𝐧𝐠 𝐏𝐨𝐰𝐞𝐫: Enhanced with 𝐚𝐝𝐝𝐢𝐭𝐢𝐨𝐧𝐚𝐥 𝐈𝐆𝐁𝐓𝐬 on LOTOS 𝐍𝐞𝐰𝐥𝐲 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐏𝐂𝐁 𝐛𝐨𝐚𝐫𝐝 & 𝐓𝐨𝐫𝐜𝐡, delivering a remarkable 25% increase in cutting power output compared to standard 50-amp plasma cutters. The advanced control systems and precision cutting flames of the newly designed torch ensure high-precision cuts with smooth and fine cut lines. Experience faster cutting speeds without compromising accuracy.
★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly designed upgraded torch and consumables guarantee enhanced precision cutting and increased durability, leading to a much longer consumable lifespan. 𝐓𝐡𝐢𝐬 𝐡𝐞𝐥𝐩𝐬 𝐥𝐨𝐰𝐞𝐫 𝐲𝐨𝐮𝐫 𝐨𝐯𝐞𝐫𝐚𝐥𝐥 𝐮𝐬𝐚𝐠𝐞 𝐜𝐨𝐬𝐭𝐬. The compact plasma cutter features a convenient handle for portability, and it utilizes non-hazardous compressed air to effortlessly cut through various materials, including stainless steel, alloy steel, mild steel, copper, and aluminum.
★ 𝐄𝐚𝐬𝐲 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4" industry-type D plug and air filter regulator enable seamless connection to your air compressor using the existing stand coupler. Setting up the entire machine is effortless and can be completed within 1 minute. ★ 𝐅𝐫𝐨𝐧𝐭-𝐌𝐨𝐮𝐧𝐭𝐞𝐝 𝐑𝐞𝐠𝐮𝐥𝐚𝐭𝐨𝐫: Emphasize the significance of pressure adjustment for attaining precise cutting. Ensures a 100% Air Leakage-Free Guarantee.
★ 𝐋𝐢𝐟𝐞𝐭𝐢𝐦𝐞 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭: we offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞 and 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 along with a 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 covered by our US based lifetime technical support. To avail the warranty, please submit the warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 dedicated customer service team is readily available to assist you through phone or email.

SaleRank No. #15

55Amp Non-Touch Pilot ARC Plasma Cutter 110V / 220V Dual Voltage Inverter DC Digital Display IGBT Portable Cutting Machine

🔔[2024 Upgraded Model Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 65% duty cycle. Current display at 110V is 20-55A, Under 220V current display is 20-55A, the maximum cutting thickness is recommended to be 15mm @ 35A 110V, 50PSI; 20mm@55A 220V, 60 PSI.
🔔[IGBT Pilot Arc Function]: S7 plasma cutter has the pilot arc function. Efficiently cut through rough, painted, and rusty surfaces and produces minimal slag.It is HF non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.Suitable cutting for stainless steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc.
🔔[Sensor of Air Pressure & Air Compressor]:Inside of Machine Have Sensor of Air Pressure, User Can Adjust The Air Pressure Through The Regulator,Users Can Use It After Connecting To The Air Compressor.
🔔[Includes]:Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.Machine easy setup and lifetime technical support.

Rank No. #16

YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Touch Arc Digital Screen Display DC Inverter 110/220V Dual Voltage Blowback Plasma Cutting Machine CUT-65DS

[NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
[Digital Screen Display]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.
[Powerful Cleaning Cutting] CUT-65DS adopts the international leading MCU intelligent digital control technology, all the main components are realized by software. Ideal Clean Cut: 5/16"@110V, 5/8"@220V Maximum Cut: 1/2"@110V, 63/64"@220V.
[PT/2T/4T Function]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
[AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.

Rank No. #17

Sunstac 5 in 1 Welding Machine and Plasma Cutter MIG/Flux MIG/HF TIG/Stick Welder 50A Plasma Cutter 200A MIG and 180A Stick Welder 110/220V Dual Voltage Multi Process Welder

【Multi-function】5 in 1 Multifunctional Welding and Cutting Machine: MIG, Flux MIG, HF TIG, stick and plasma cut available. Compatible for both home DIY and industrial projects.
【MIG Synergic Control】Built-in synergic control system. The arc is automatically stabilized, optimal pulse parameters are maintained to obtain the ideal weld formation, making it much easier for novice.
【Max Cutting Thickness】Ideally suitable for 8-10mm clean cutting, if being turned to 50A, max cutting will be 15mm thickness. Recommended air compressor power for plasma cutting mode: 4.2CFM @ 60-70 PSI, do not go over 120PSI or it will break the internal air compressor filter.
【Aluminum MIG Welding】It can apply .035''&.045'' aluminum welding wire, and spool gun is compatible (Buy Separately).
【LCD Screen Panel】Welding data will clearly render on the smart LCD panel, direct dispaly and control make works much easier.

SaleRank No. #18

Plasma Cutter 50Amps,110/220V Dual Voltage Plasma Cutting IGBT Inverter Air Touch ARC Metal Cutting Machine 3/4" MAX Cut for Beginners DIY,Upgrade CUT50PRO

【POWERFUL PERFORMANCE】Automatic dual-voltage 110/220V advanced IGBT inverter technology, max cut up to 3/4"& ideal clean cut 1/2",duty cycle 60%. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc.
【EASY TO SETTING】With plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 1 min you can start cutting.Recommended current is 50A,conversion line easy transfer from 110V to 220V Home Use, Air Pressure 60-70PSI,duty cycle with 60% at 50A, 100% at 40A.
【LIGHTWEIGHT&PORTABLE】Upgrade plasma cutter machine only weigh 14 pounds, more easy to carry,tiny and light enough to move in any workplace.Conversion line easy transfer from 110V to 220V for home use.
【DURABLE&SAFETY】Cutting smoothly,you can adjust the post-flow time from 2-15 seconds to have a clean cut. When you stop cutting,air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
【GENERATOR SUPPORTED】Enerator supported this plasma cutter works well with generator,suggest 5000W above generator. 2-year limited warranty and you will get a local supports for any assistance.

Rank No. #19

Plasma Cutter, High Frequency 50/60Hz IGBT Inverter Air Plasma Cutting Machine (CUT45D 110V/220V)

Machine come with 110V power plug, We provide three years warranty for this unit.

SaleRank No. #20

HITBOX 45Amp Plasma Cutter Non HF Non-Touch Pilot Arc Plasma Cutting Machine 110V/220V Dual Voltage Digital Display IGBT Inverter Metal Cutting Machine with 1/2" Clean Cut and 2T/4T(HBC45)

【NON HIGH FREQUENCY START】HITBOX HBC45 comes with XTS45 plasma torch and friendly to the surrounding electrical machine and human body without interference. XTS45 unique gumwood swirl ring for better plasma arc penetration and more aesthetically pleasing cutting ends.
【NON TOUCH PILOT ARC】HITBOX plasma cutter adopt a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate and no need to cut from the edge, let you cutting easy!
【UPGREATED PLASMA CUTTER】Output 60% duty cycle 45amp air plasma cutter. On Carbon steel Max Rated Clean Cut Thickness: 12mm. Max Severance Thickness:18mm.
【LED DIGTAIL DISPLAY & 2T/4T】You can adjust the current and cutting mode according to the LED digital display and read the air pressure value more easily. The plasma cutting has semi-automatic and automatic cutting modes, and can switch 2T/4T through the display screen to meet your needs and choices.
【LIGHTWEIGHT & APPLICATION】Our updated plasma cutter is compact, shaped and lightweight with an easy carry handle. It is suitable for the home DIY hobby, repair work, metal processing, site work, etc. HITBOX provide 2 years warranty for our brand products, If there are any questions, please feel free to contact us.

Last update on 2024-07-10 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Automatic Plasma Cutter?

Do you get stressed out thinking about shopping for a great Automatic Plasma Cutter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Automatic Plasma Cutter, which is why we have assembled a comprehensive list of the greatest Automatic Plasma Cutter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Automatic Plasma Cutter that you consider buying. Your questions might include the following:

Is it worth buying an Automatic Plasma Cutter?
What benefits are there with buying an Automatic Plasma Cutter?
What factors deserve consideration when shopping for an effective Automatic Plasma Cutter?
Why is it crucial to invest in any Automatic Plasma Cutter, much less the best one?
Which Automatic Plasma Cutter are good in the current market?
Where can you find information like this about Automatic Plasma Cutter?

We’re convinced that you likely have far more questions than just these regarding Automatic Plasma Cutter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Automatic Plasma Cutter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Automatic Plasma Cutter. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Automatic Plasma Cutter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Automatic Plasma Cutter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Automatic Plasma Cutter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Automatic Plasma Cutter?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Automatic Plasma Cutter.
Customer Ratings: Number ratings grade Automatic Plasma Cutter objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Automatic Plasma Cutter.
Product Quality: You don’t always get what you pay for with an Automatic Plasma Cutter, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Automatic Plasma Cutter is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Automatic Plasma Cutter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Automatic Plasma Cutter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

20 Best Automatic Plasma Cutter of 2023 – Romance University

How Do You Buy The Best Automatic Plasma Cutter?

Related Post: