The Best Avm Se1200M80Bl of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Avm Se1200M80Bl of 2023. Check our ranking below.
2,387 (random number) Reviews Scanned
SaleRank No. #1
Lift Supports Depot Qty (2) PM2048 SE1200M80BL 4568 Tonneau Cover Lift Supports 29.50" Extended 13mm ends
- This listing includes 2 automotive Lift Supports For the Tonneau Cover
- Extended Length from Center Mount to Center Mount is 29.49 in.
- Compatible with the following OEM Numbers: 030359, 030475, 1200M80BL, 2934, 4568, 713120, 7131201200, 713120-1200, 716821, 8196319, RB8795984, SE1200m80BBL3158, SE1200M80PS100, Snug Top SnugTop PM2048
- These lift supports install easily in minutes with no special tools required.
- Lift Supports Depot supports are High Quality Lift Struts. Designed to install easily in minutes, often times without special tools
Rank No. #2
2 Pcs Tonneau Cover Lift Supports Extended Length 29.50 inches, Compressed Length 17.50 inches, Force 85 Lbs, 1/2" Ball Socket Metal Ends, 4568 PM2048 716821
- Vehicle Location - Snug Top Tonneau Cover (PLEASE DOUBLE CHECK THE SIZE OF BALL STUD)
- Force (lbs) 85.00
- Extended Length [in] 29.50 , Compressed Length [in] 17.50
- Body End Description Ball Socket Long Cup (Steel) Type=13mm=1/2"=.50" (PLEASE DOUBLE CHECK THE SIZE OF BALL STUD)
- Shaft End Description Ball Socket Long Cup (Steel) Type=13mm=1/2"=.50"(PLEASE DOUBLE CHECK THE SIZE OF BALL STUD)
Rank No. #3
ARANA PM2048 4568 713120-1200 29 inch 85Lb/378N Gas Struts Prop Shock 030475 716821 SE1200M80BL 030359 29 inch Lift Support for Tonneau Cover SnugTop Snuglid Snugfit Truck Bed Cover
- ✅ Qty (2) 29 Inch 85 lb Gas Struts -- Extended Length (Center-to-Center): 29.49" (686 mm); Compressed Length (Center-to-Center): 17.05" (433 mm); Force 85 Lbs (378 N) Per Strut, 2 Struts included in Per Set; Package content: 2× Shocks, 1× Installation Guide are included in each set;
- ✅Interchange number: PM2048, 030359,030475,1200M80BL,2934,30359,4568,713120,7131201200,713120-1200,716821,8196319,RB8795984,SE1200m80BBL3158,SE1200M80PS100,Snug Top 713120-1200,SnugTop 713120-1200
- ✅PM2048 29 inch Gas Spring -- The gas struts can be used as the replacement parts of the Tonneau Cover Truck Bed Cover SnugTop Cover Snuglid Bed Snugfit Cover Truck Rear Lid and also can be used on Trap Door and DIY Builds. Easy to install without any special tools required.
- ✅2 Pcs 4568 Gas Prop Springs -- If you use the struts for your tonneu cover, please confirm the Interchange Number of your old sturts firstly or measure the the length from the center of the socket to the center of the socket before purchasing. Our gas shocks are not suitable for all Tonneau Cover.
- ✅18 Months Replacement/Refund Support--18 Months Support comes with every ARANA strut; once you need any installation guide or any unfit problem, in-time help or 18 months replacement support will be provided if let ARANA know!!
Rank No. #4
2 Truck Upfitters 26.5" Gas Props Compatible with Snuglid SL & F2 Pickup Truck Shortbed Tonneau Covers (26.5" Extended 15.4" comp, 80 lbs of Press ea) Measurement REQ'D! Incl 4 Ball mounts and Nuts!
- CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE ARE NOT COMPATIBLE WITH ALL SNUGLID TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!
- Truck Upfitters Pair (2 total) of 80 pound (each) gas struts. 26.5" extended length and 15.4" compressed length. Most commonly used and compatible with for Snuglid/Snugtop brand (SL & F2 models) and compatible with Snuglid style Tonneau covers with 2 single lift assist arms. Fits other similar brand of fiberglass tonneau covers / truck lids, but measurement is required to ensure fit.
- These are not compatible with all Snuglid fiberglass tonneau models (they do NOT fit ANY SL2 or RL models). Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. Also check for 80 pounds of pressure, or 355N - 356N Newtons of pressure and part number 713119 on the strut. We also offer 29.5 long props for longer beds, in 80, 90 and 100 lb pressures.
- Comes with four threaded 13mm ball mounts and nuts for alternate 'other than tonneau cover' applications, such as in RV doors and awnings, boat hatch spring lifts, storage bed lifts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Compatible with some (but not all) Snuglid SL and F2 Shortbed and Extrashort bed (5.5-6.5') Truck Tonneau Covers with single lift arms (see picture). Check your original struts for part numbers: Compatible with Snugtop # 713119 or compatible with Stabilus # 202677.
Rank No. #5
ARANA 1015903 13 inch 55LB Gas Spring Struts, C1615120 13" 245N Shocks Lift Support for Tool Box Lid Truck Topper Camper Shell Side Window are Leer Canopy, 2Pcs Set
- ✅13" 55 pound gas struts - Compatible with the following OEM Numbers: C1615120, C16-15120, 95965, 1015903, 10159-03, 4126, 752770, 8196308, E95965, RB8795965, SE130P55
- ✅13 inch struts- ARANA 13 inch spring shocks will be suitable for lid weigh between 48-65 lbs; Note: do measure the lid weight or check the oem number to buy correct items;
- ✅13 inch gas struts with 10mm End Balls- ARANA 13" gas struts are widely used on your tool box lid, truck topper, camper shell, side window, leer canopy and so on.
- ✅13 inch gas spring with 10mm End Fitting - Extended Length A (Center-to-Center): 13" (330.2 mm), compressed length B (Center-to-Center): 8.4" (213.36 mm); Force 245N/55Lb Per Strut, 2 Struts Per Pair;
- ✅About installation & support - could only be compressed after installing successfully; once you need any installation guide or any unfit problem, in-time help or 18 months replacement support will be provided if let ARANA know!!
Rank No. #6
15" 55Lbs/245N Lift Support Struts Gas Spring Shocks Hydraulics Piston Lid Stay for Tool Box Outdoor Cabinets Boat Bed Cover Door Lids and Other Custom Heavy Duty Project
- ★Must-read Parameter★ -- Extended Length: 14.96" . Compressed Length: 9.06" ; Force: 55Lbs per shock. End fitting: 10mm Ball Stud Mounting Bracket.
- ★Application Range★-- Most suitable support weight is 45-90 pounds! If the lid weight is less than 45 lbs or more than 90 pounds, please choose other pressure struts!!!
- ★Where you use them?★ -- Heavy-Duty equipment such as bed with a small compartment, outdoor TV Cabinet, marine projects, heavy toolbox lid, camper shell, truck canopy, trap door, trailer door, trash bin, and other custom Medium or Heavy equipment stom Medium or Heavy equipment.
- ★About Installation★ -- Hurotoms 15" 55 pounds gas shocks struts are very easy to install with 2 pillars, 4 mounting brackets and 4 screws.
- ★Our Commitment★ -- If you have any questions or dissatisfaction or need to install/use guide, welcome to contact us by email or click "Ask the seller".
SaleRank No. #7
BOXI 2pcs Universal Lift Supports Struts Shocks Gas Struts Shocks Springs Supports Extended Length 13" Compressed Length 8.40" 155 lbs 10mm (3/8") Ball Socket | 4129
- Extended Length [in] 13.00 (measured between the ball fitting centre)
- Compressed Length [in] 8.40 (measured between the ball fitting centre)
- Force (lbs) 155.00 Each Shock , ext.ser.num 689N, 10mm Ball Socket
- 5 Year Warranty
- Lift Supports Gas Struts Shocks for Tool Box Lid Boat Storage Lids Truck Topper Truck Cap
Rank No. #8
HD Switch 2 Pack Steering Damper Replaces 116-0027 109-9820 142-8117 for Exmark Toro fits Most Lazer Z Advantage Z Master G3 Series Professional Series 5000 6000 7000 Lawn Mower - w/DUST Seal Upgrade
- HD⚡SWITCH: Engineered Performance
- DUST SHIELD UPGRADE: Dust Seal Protective Cover
- IMPROVED SEAL: Additional Layer Of Protection From Dirt & Dust
- LIGHTNING-FAST HANDLING: ALL Orders Before 2pm EST HANDLE SAME DAY
Rank No. #9
Tonneau Cover Truck Lift Supports Struts Shocks 29.50" Extended 13mm Ends, 1/2 Ball Socket Metal Ends,4568 PM2048 716821
- Placement on Vehicle: Snug Top Tonneau Cover (PLEASE DOUBLE CHECK THE SIZE OF BALL STUD)
- Force (lbs) 85.00
- Extended Length [in] 29.50, Compressed Length [in] 17.50
- Body End Description Ball Socket Long Cup (Steel) Type=13mm=1/2"=.50" (PLEASE DOUBLE CHECK THE SIZE OF BALL STUD)
- Shaft End Description Ball Socket Long Cup (Steel) Type=13mm=1/2"=.50"(PLEASE DOUBLE CHECK THE SIZE OF BALL STUD)
Rank No. #11
PAMAGOO 23 inch 100 lbs Gas Strut Shocks, 445 N Per Prop with L-Type Mounts for Heavy Duty Toolbox, Trunks, Storage Lid, RV Bed, Basement Floor Door, ONLY FIT 85-115 LBS Weights, 2 Pack Gas Spring
- 🔶SET OF 2 Gas Shocks Struts🔶Extended Length: 23", Compressed Length: 13.55", Force 200 Pounds Per Strut. It could hold open 160lb-220lb on any object each set.
- 🔶EASY TO INSTALL🔶 Include 4 L-Type Mounting Brackets, just need to drill a pilot hole. After installation, these lids will lift safely and smoothly using ONLY ONE finger.
- 🔶WHY CHOOSE US?🔶180,000 times -passed TUV fatigue test. Pamagoo choose special low-temperature-resistant materials, WORKING TEMPERATURE: ❄-40℃~60 ℃/-40℉~140℉
- 🔶Don't Worry🔶We will provide you with professional customer service BOTH before and after your purchase and offer 18-MONTHS guarantee.
- 🔶FREE YOUR HANDS🔶23" 100Lb/445N Gas Prop Shocks will help you support the floor hatch door, RV queen bed lift, truck canopy cover, camper shell, teardrop trailer, and other custom Medium or Heavy equipment.
Rank No. #12
Qty(2) BOXI Universal Lift Supports Extended Length: 11.00 Inches Compressed Length: 7.42 Inches Force: 35 Lbs 10mm Ball Socket Shocks 6918
- Extended Length: 11.00 Inches Compressed Length: 7.42 Inches
- Force: 156N = 35 Lbs.
- End Fitting: Ball Socket U Band (Nylon)=10mm=3/8"=.39"
- 5-Year Limited Warranty
- IMPORTANT NOTE - Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchasing. If you don't make sure whether this item fit your vehicles, please message us.
SaleRank No. #13
Qty(2) BOXI 4127 Universal Lift Supports Extended Length 13.00" Compressed Length 8.40" Force 65 LB 10mm Ball Socket Gas Struts Shocks for Tool Box Lid Boat Storage Lids Truck Topper Truck Cap
- Extended Length [in] 13.00
- Compressed Length [in] 8.40
- Force 65 LB for each strut
- End Fitting: Ball Socket U Band (Nylon)=10mm=3/8"=.39"
- 5 Years Warranty
Rank No. #14
10 inch 35 lbs Gas Struts, 10" 156 N Toolbox Lid Gas Shocks Spring, for Weatherguard Aluminum Truck Tool Box Lid, Boat Storage Lid Support, 4058 7835PB Replacement Struts, Qty 2 by PAMAGOO
- 🚙OEM Part Number🚙4058 7835PB Extended Length: 10.00 Inch; Compressed Length: 6.60 Inch. 35 lb 156 N per prop. 2 PACK!!!
- 🚙4058 for Pickup Toolbox🚙Perfect OEM replacement lift struts for 4058: Exactly designed based on original lift supports, this 1 pair of Pamagoo lift struts could perfectly replace the worn-out shocks Lid Support on your Pickup Truck Cap Toolbox / Weatherguard Tool Box / RV Door / RV Motorhome Compartment Chest.
- 🚙7835PB Truck Cap Gas Strut🚙Easy to install lift support struts: high quality end sockets to allow for easy replacement of your old shock, just use a small screwdriver to pry up the metal clip of the old strut to remove it, and then align the new strut onto the end fitting of your car, press with your finger to snap it into place, done!
- 🚙40231035 for RV Door🚙Renovate your rear window shock: have you been tried of raising your window / door / lid by your hand, head or back? Pamagoo Gas Shock will make your window / door / lid stays up again! FREE YOUR HANDS~
- 🚙40231540 for Motorhome Side Bay Door🚙Our promise: every Pamagoo gas strut has been undertaken with 180,000 times durability test to ensure its service life and smooth working performance, Pamagoo will provide 18 months replacement support to ensure your no-worries using!
Rank No. #15
Apexstone 100N/22lb Gas Struts 10 Inch Gas Struts Lift Supports Gas Spring Lid Support Gas Props/Shocks, Set of 4
- Lids soft open gently,Ideal for supporting the lid to keep it open.NOT SOFT CLOSE!
- Force:100N/22.5lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8"
- Support opens lids to a maximum angle of 90 degrees.Available working temperature :-10℃~50℃/14℉-122℉
- Instructions Included, Screws Included.This gas strut is okay for rv cabinet door, tool box, can ,etc.
- We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
SaleRank No. #16
20 inch 100 lbs Gas Strut Shocks, 445 N Gas Spring with L-Type Mounts for Heavy Duty Lid TV Cabinets Cover Basement Floor Door RV Bed, ONLY FIT 85-115 LBS Weights, Per Prop 2 Pack by PAMAGOO
- 🔸20 inch Gas Strut🔸 Extended length: 20.00 Inch; Compressed length: 12.13 Inch. Pressure: 100 Lb /445 N per strut, Package information: 20 inch 100 lbs gas prop strut X 2; L-Type Angled Mounting Bracket X 4; Gas Strut Installation Guide X 1; Important note: Do not compress the gas struts by hand before installation.
- 🔸Heavy Duty Lid Strut🔸20 inch Lift-o-mat spring for the Garbage Shed Lid, TV Cabinet, Under bed storage cover, Loft / cellar floor hatch door, Tool box lid, Truck canopy cover, DIY project, etc.
- 🔸20 inch Gas Spring🔸Please choose the gas struts with the appropriate pressure according to the weight of your application!💡This is very important to ensure proper operation of the gas strut.
- 🔸20" Gas Shock🔸180,000 times -passed TUV fatigue test. PAMAGOO choose special low-temperature-resistant materials. 🌡️ WORKING TEMPERATURE: -40℃ ~ 60 ℃ / -40℉ ~ 140℉.
- 🔸SATISFACTORY SERVICE🔸 We will provide you with professional customer service BOTH before and after your purchase and offer 18-MONTHS support service. PLS don't forget our lifetime customer support!
Rank No. #17
Qty(2) 6923 Universal Gas Lift Supports Struts Shocks Cylinders Extended Length 15.00 Inches Compressed Length 9.40 Inches Force 30lbs Eyelet Hole 10.2mm
- Extended Length [In]: 15.00; Compressed Length [In]: 9.4
- Force (lbs) 30.00, ext.ser.num 133N ; Blade|Eyelet Mount.Eyelet ends 10.2mm
- Perfect fits Tool box lid,Household cabinets,Truck work box,Automotive,Industrial,Marine and many other applications.
- Interchange Part Number: 6923,10435,8195575,FTR30,SL2-30,ML2-30,SL-230,ML-2-30,SL-2-30,SL2-30-1,SL-2301,SL-2-30-1,SL2-30-5,SL-2305,SL-2-30-5
- Easy to install in just minutes with simple tools. And please check the below description and compatibility chart before your purchasing.
Rank No. #18
YMAUGP QTY2 Lift Supports Shocks Struts Tool Box Lid Camper Shell 10.00 in 60 lbs 10.2mm Eyelet Ends 4037 SG459003 Gas Charged Universal Lift Supports Struts Shocks Springs Dampers
- Qty (2) 10 Inch Gas Struts-- Extended size 10 inch, compressed size 6.75 inch; End Fiting: 10.2mm Ball Stud Sockets; 60 lbs per shock, 2 lift struts included in each set.Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!
- Most suitable SUPPORT weight lid is 55-65 pounds.Fits Universal Lift Supports; Interchange Part Number: 4037, SG459003, 8195572, 014092, 5171KB, 1714EJ, 6604, 10078-60, 10078, 1007860, 901335, FSR60, SL1-60, ML1-60, SL-160, ML-1-60, SL-1-60, SL1-60-1, SL-1601, SL-1-60-1,SL1-60-5, SL-1605, SL-1-60-5, SL160, SL1601, SL1605, ML160, RB8795291, 95845, 614269
- Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head ensures easy installation and precise operation
- 10" Gas Prop Shocks will be a perfect replacement for Tonneau Camper shell rear window topper door Tonneau Cover RV Bed Door Truck Car's window.10" Gas Prop Shocks will be a best helper for your pickup truck tool box lid, light aluminum toolbox, weatherguard toolbox, home-built toy box trash bin cabinet lid.Universal, like Automotive, Truck, Industrial, Marine
- If you unluckily encounter with missing parts, broken ball connectors, wrong package or unfit problem, just click "ASK SELLER" besides your order from us for immediate assistance
Rank No. #19
ARANA 713119 26 inch 80 Lb Gas Struts Spring Shocks 26 inch 80Lb Lift Support for Sung Lid Cover Snug Top Lid Fiberglass Bed Cover Tonneau Cover RV Kitchen Door, Set of 2
- ✅26" 80 pound gas struts - Compatible with the following OEM Numbers: 713119.
- ✅26 inch struts for heavy lids - ARANA 26 inch spring shocks will be suitable for heavy lids, with lid weight between 65-88 lbs, side length ≥ 39 inch; Note: do measure the lid weight or check the oem number to buy correct items.
- ✅26 inch gas struts - ARANA 26" gas struts are widely used on your sung lid cover, snug top lid, fiberglass bed cover, DIY builds, tonneau cover, RV kitchen door those need long-size replacement struts, as long as the lid weight is between 65-88 pounds.
- ✅26 inch gas spring - Extended Length A (Center-to-Center): 26.5" (673 mm), compressed length B (Center-to-Center): 15.4" (391 mm); Force 356N/80Lb Per Strut, 2 Struts Per Pair.
- ✅About installation & support - super long and super strong, could only be compressed after installing successfully; once you need any installation guide or any unfit problem, in-time help or 18 months replacement support will be provided if let ARANA know!
SaleRank No. #20
C1608260 20 inch 60 lbs Gas Struts C16-08260 20" Gas Spring Tanning Bed Shocks, Lift for RV Motorhome Storage Door Basement Floor Hatch Door TV Cabinet Shed Window Qty 2 by PAMAGOO
- 🔶SET OF 2 Gas Struts Springs🔶Extended Length: 19.7", Compressed Length: 11.8", Force 60Lbs Per Strut. It could hold open 48Lbs-66Lbs on any object each set. Most suitable LID SIDE LENGTH IS MORE THAN 45 INCH.
- 🔶EASY TO INSTALL🔶After installation, these lid/cover will lift safely and smoothly using ONLY ONE finger.
- 🔶WHY CHOOSE US?🔶180,000 times -passed TUV fatigue test. Pamagoo choose special low-temperature-resistant materials, WORKING TEMPERATURE: ❄-40℃~60 ℃/-40℉~140℉
- 🔶SATISFACTORY SERVICE🔶When you buy through Pamagoo, we will provide you with professional customer service both before and after your purchase and you could also get our 18-MONTHS guarantee.
- 🔶FREE YOUR HANDS🔶20" 60Lbs/267N Gas Prop Shocks will help you support the floor hatch door, outdoor bench lid, RV queen bed lift, truck canopy cover, camper shell struts, teardrop trailer, and other custom Medium or Heavy equipment. **VERY STRONG!!! Couldn't be compressed by HANDS.**
Last update on 2023-08-08 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Avm Se1200M80Bl?
Do you get stressed out thinking about shopping for a great Avm Se1200M80Bl? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Avm Se1200M80Bl, which is why we have assembled a comprehensive list of the greatest Avm Se1200M80Bl available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Avm Se1200M80Bl that you consider buying. Your questions might include the following:
- Is it worth buying an Avm Se1200M80Bl?
- What benefits are there with buying an Avm Se1200M80Bl?
- What factors deserve consideration when shopping for an effective Avm Se1200M80Bl?
- Why is it crucial to invest in any Avm Se1200M80Bl, much less the best one?
- Which Avm Se1200M80Bl are good in the current market?
- Where can you find information like this about Avm Se1200M80Bl?
We’re convinced that you likely have far more questions than just these regarding Avm Se1200M80Bl, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Avm Se1200M80Bl, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Avm Se1200M80Bl. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Avm Se1200M80Bl buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Avm Se1200M80Bl currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Avm Se1200M80Bl has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Avm Se1200M80Bl?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Avm Se1200M80Bl.
- Customer Ratings: Number ratings grade Avm Se1200M80Bl objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Avm Se1200M80Bl.
- Product Quality: You don’t always get what you pay for with an Avm Se1200M80Bl, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Avm Se1200M80Bl is should be an indication of how long it will work out for you.
We always remember that maintaining Avm Se1200M80Bl information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Avm Se1200M80Bl is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.