Skip to content

20 Best B250K Pot of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best B250K Pot of 2023. Check our ranking below.

2,288 Reviews Scanned

Rank No. #1
FLEOR 2pcs Small Size Guitar Pots 18mm Split Shaft B250K Potentiometers Linear Taper
  • Linear taper, 250K ohm resistance.
  • Split shaft.
  • Suitable for use as volume or tone pot.
  • Coarse knurled shaft, 18mm.
  • Package Include: 2pcs B250K Guitar Pots.
Rank No. #2
Guitar Potentiometers Split Shaft Pots Audio Tone Switch Control Pack of 10 (B250K)
  • High quality audio-potentiometers, perfect for replacing and upgrading volume and tone controls.
  • B250K-ohm mini control pot
  • Coarse knurled shaft fits most control knobs
  • Long Knurled and split shaft, Full Size
Rank No. #3
CTS 250K Electric Guitar Pots Guitar Linear Potentiometers B250K
  • Split shaft with Fine Spline Knurled; Shaft Length:18.5mm; Shaft Diameter: 6mm; Base Diameter: 24mm
  • It's made in CTS Taiwan Company, we have shown the detailed factory diagram for the pots, please verify the diagram if you have any doubts. CTS has several factories that all of them can produce guitar pots
  • A' means Audio Taper which increases or decreases in a sloped curve fashion ; 'B' means Linear Taper which increases or decreases in a linear fashion
  • Generally speaking, Audio Taper (A) are always used as Tone and Linear Taper (B) are always used as Volume, but you can use Audio Taper as Volume and Linear Taper as Tone as well, it usually depends on your personal preference.
  • Package includes: 1x CTS Pots; Comes with Nut and Washer
Rank No. #4
Musiclily Pro Brass Shaft Full Metric Sized Control Pots B250K Linear Taper Potentiometers for Guitar (Set of 4)
  • These pots are widely used guitar tone and volume controls. Metric sized pots mostly use in import guitar or Asia made guitar
  • 6mm knurled split brass shaft fits a coarse-knurled (18-spline) knob. It will fit modern Squier/Epiphone/ibanez/ESP etc made in China/Korea/Japan guitar's stock knobs
  • Metric sized, Thread M8 x 0.8, Thread height 10mm (3/8"), aluminum. 24mm (15/16") diameter full sized base . Standard solid construction
  • Linear taper with standard ±20% resistance tolerance, 250K-ohm pots are usually used for single-coil pickups. A 250K gives a slightly warmer tone than a 500K, and bleeds off (attenuates) some of the high frequencies to ground
  • Package included: 4 pieces potentiometers, nuts and washers
Rank No. #5
Full Size B250k Electric Guitar Potentiometer Bass Volume Pots Tone Long Split Shaft 18mm Pack of 5
  • Perfect for electric and bass guitars, this pot pack features a B250k-ohm big control pot and long knurled split shaft.
  • Upgrade your electric bass guitar with this full size guitar pot for improved volume and tone controls.
  • Enhance the sound of your electric guitar with this long pot and split pot design.
  • This guitar volume pot pack includes a high-quality potentiometer for electric bass guitars.
  • Get the best performance from your electric bass with this reliable guitar pot pack featuring a pot 5 design.
SaleRank No. #6
FLEOR 2pcs B250K Guitar Pots L18mm Shaft Linear Taper Tone Guitar Potentiometer, Golden Color
  • Linear taper, 250K ohm resistance.
  • Split shaft, golden color.
  • Suitable for use as volume or tone pot.
  • Coarse knurled shaft, 18mm.
  • Package Include: 2pcs B250K Guitar Pots.
Rank No. #7
FLEOR 2pcs Push Pull Guitar Pots Short 15mm Split Shaft Linear Audio Taper Guitar Potentiometers
  • Linear taper, 250K ohm resistance.
  • Push pull guitar pots.
  • Suitable for use as volume or tone pot.
  • Coarse knurled shaft, 15mm.
  • Package Include: 2pcs B250K Guitar Pots.
Rank No. #8
Metallor Alpha Pots Linear B250k Tone Potentiometer Electronics for Electric Guitar or Bass.(Larger B250k)
  • The Linear B pots are usually used as tone controls, comes complete with fixing nut and plain washer
  • Fit for Squire and Strat/Tele style electric guitar or bass building
  • Split shaft 6mm will for most common Knob styles
  • Genuine, larger size, ALPHA POTS Linear B250k Potentiometer
  • Dimensions: Shaft Length 13.5mm; Pot Width 24mm; Overall Height 25mm
Rank No. #9
Alpha Full B250K Metric Potentiometers Split Shaft Linear Taper Pots for Electric Guitar or Bass (4 Pieces)
  • Alpha potentiometers are among the world's most widely used guitar tone and volume controls, good to fit small cavity. Metric sized potentiometers mostly use in import guitar or Asia made guitar
  • Genuine Alpha control pots, made in Korea. Metric sized M8 thread, 8mm diameter;Threaded portion height 9.5mm (3/8 inch), aluminum. 24mm (15/16 inch) diameter full sized base. Standard solid construction
  • Linear taper with standard ±20% resistance tolerance. Full size, 250K potentiometers are usually used for single-coil pickups.A 250K gives a slightly warmer tone than a 500K, and bleeds off (attenuates) some of the high frequencies to ground
  • 6mm knurled split shaft fits a coarse-knurled (18-spline) knob. It will fit modern Squier/Epiphone/ibanez/ESP etc. made in China/Korea/Japan guitar's stock knobs
  • Package included: 4 pieces potentiometers, nuts and washers
Rank No. #10
Musiclily Guitar Mini Size Pots B250K Split Knurled Long 18mm Shaft Linear Taper Potentiometers for Stratocaster and Telecaster Guitar Bass Parts(Pack of 2)
  • Fits Stratocaster and Les Paul 6MM knobs,should also fits other 6mm knobs as well.Ideal for electric guitar or bass building.
  • Full Resistance: 250k ohm; Linear Taper
  • Shaft Length: 18mm; Shaft Diameter: 6mm
  • Mini size; Whole Length: 24mm,Base Diameter: 16mm
  • Package includes: 2 pcs Potentiometers
Rank No. #11
CTS 450 Series B250K Guitar Pots Split Shaft Fine 24-Splines Linear Taper Potentiometers for Electric Guitar/Bass, 10% Tolerance (Set of 4)
  • Fits most USA guitar/bass, CTS pots have long been the first choice in American guitars like Fender, USA Les Paul, etc.
  • Musiclily CTS pots features ±10% resistance tolerance compared to CTS products offered by most other suppliers
  • CTS 450 Series, 250K, Linear taper, design for guitar bass usage, gives you smoother and more accurate response
  • Fine 24 spline split knurled shaft with nut, lock and dress washer. Threaded bushing is 3/8 inch (9.525mm) tall
  • 250K is usually used for single coil pickup, gives a slightly warmer tone than a 500K. B250K is for volume knob normally.
Rank No. #12
Musiclily Pro Brass Thread Mini Metric Sized Control Pots B250K Linear Taper Potentiometers for Guitar (Set of 4)
  • These pots are widely used guitar tone and volume controls, good to fit small cavity. Metric sized pots mostly use in import guitar or Asia made guitar
  • 6mm knurled split brass shaft fits a coarse-knurled (18-spline) knob. It will fit modern Squier/Epiphone/ibanez/ESP etc made in China/Korea/Japan guitar's stock knobs
  • Metric sized, Thread M8 x 0.8, Thread height 10mm (3/8"), aluminum shaft. 16.5mm (5/8") mini sized base. Standard solid construction
  • Linear taper with standard ±20% resistance tolerance, 250K-ohm pots are usually used for single-coil pickups. A 250K gives a slightly warmer tone than a 500K, and bleeds off (attenuates) some of the high frequencies to ground
  • Package included: 4 pieces potentiometers, nuts and washers
Rank No. #13
FLEOR 2pcs B250K Push Push Guitar Pots Short Copper Split Shaft Linear Taper Potentiometers
  • Push & Push potentiometer, one downward touch does it all, no clutching and fumbling forever, there is no need to pull anymore, just Push & Push and play it, so much easier to use than a push/pull pot.
  • This potentiometer is perfect for electric guitar/bass building, for pickguard/control plate mounting.
  • Short (20mm) split knurled diameter shaft 1/4" (6mm) , thread shaft diameter 3/8" (9.4mm), the whole shaft made of copper, durable.
  • B Type(Linear Taper), full resistance is 250K ohm, push-push pot & DPDT switch, with solder terminals.
  • Package Include: 2pcs B250K Guitar Pots.
SaleRank No. #14
Musiclily Pro B250K Full Brass Inch Sized Fine 24-Spline Split Shaft Pot Linear Taper Potentiometer for USA Electric Guitar Bass
  • Fits for most USA electric guitar and bass
  • Fine 24-spline split shaft diameter: 6mm (15/64 inch), threaded diameter and height: 9.5mm (3/8 inch)
  • Made of full brass, better conductivity
  • Linear Taper, resistance: 250K, tolerance: ±20%, usually used for single coil pickups, bleeds off some of the high frequencies to ground, gives warmer tone than 500K
  • Package included: 1 piece guitar potentiometer with mounting accesssories
SaleRank No. #15
Healifty Guitar Accessory B250K Split Shaft Audio Taper Potentiometer Dual Pot for Volume or Tone
  • Easy to install, convenient to use.
  • An excellent replacement part for guitar.
  • Made of high quality material, it is solid and sturdy.
  • B250K mini control dual pot.
  • Perfect for replacing and upgrading volume and tone controls.
Rank No. #16
Dopro 5pcs Linear Guitar Pots Volume 250K Electric Guitar Large Pots 24mm Base with Long Split Shaft Guitar Potentiometer B250K
  • Audio Taper (A) increases or decreases in a sloped curve fashion ; Linear Taper (B) increases or decreases in a linear fashion; Audio Taper (A) are always used as Tone and Linear Taper (B) are always used as Volume, but you can use Audio Taper as Volume and Linear Taper as Tone as well, it usually depends on your personal preference.
  • Long Split shaft with coarse knurling
  • Shaft Total Length: about 17.5mm; Knurled Shaft Diameter: about 5.8mm; Base Diameter: about 24mm
  • Very hot quality metric guitar pots for most electric guitars
  • Package includes 5pcs Guitar pots with nuts and washers
Rank No. #17
B250k Push Pull Pot/Switch Potentiometer Volume Audio Control Tone Compatible with Electric Guitar Bass Parts
  • High Quality B250k coil tap push/pull pots.
  • 18mm shaft length, fits all standard 7mm pick guard hole size.
  • Split shaft with coarse knurling fits most control knobs.
  • Shaft Diameter: 6mm
  • Whole Length: 43mm ; Shaft Length: 18mm
Rank No. #18
Musiclily Guitar Full Size Pots B250K Split Knurled Long 15mm Shaft Linear Taper Potentiometers for Stratocaster and Telecaster Electric Guitar Bass Parts(Pack of 2)
  • Fits Stratocaster and Les Paul 6MM knobs,should also fits other 6mm knobs as well.Ideal for electric guitar or bass building.
  • Full Resistance: 250k ohm;Linear Taper
  • Shaft Length: 15mm Shaft Diameter: 6mm
  • Full size;Whole Length: 29Mm. Base Diameter: 23Mm.
  • Package includes: 2 pcs Potentiometers
Rank No. #19
Musiclily Pro B250K Full Brass Inch Sized Fine 24-Spline Split Shaft Pots Linear Taper Potentiometers for USA Electric Guitar Bass (Set of 4)
  • Fits for most USA electric guitar and bass
  • Fine 24-spline split shaft diameter: 6mm (15/64 inch), threaded diameter and height: 9.5mm (3/8 inch)
  • Made of full brass, better conductivity
  • Linear Taper, resistance: 250K, tolerance: ±20%, usually used for single coil pickups, bleeds off some of the high frequencies to ground, gives warmer tone than 500K
  • Package included: 4 pieces guitar potentiometers with mounting accesssories
Rank No. #20
Musiclily Pro HD B250K Full Brass Metric Coarse 18-Spline Split Shaft Pots Linear Taper Potentiometers for Electric Guitar Bass (Set of 4)
  • Fits most imported or Asia made electric guitars and basses
  • Coarse 18-spline split shaft diameter: 6mm (15/64 inch), threaded bushing diameter and height: M8 and 10.5mm (13/32 inch)
  • Full brass made shaft and thread, better conductivity
  • Linear taper, resistance: 250K, tolerance: 20%, usually used for single coil pickups, bleeds off some of the high frequencies to ground, gives warmer tone than 500K
  • Package includes: 4 pieces pots with mounting accesssories

Last update on 2023-08-20 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best B250K Pot?

Do you get stressed out thinking about shopping for a great B250K Pot? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching B250K Pot, which is why we have assembled a comprehensive list of the greatest B250K Pot available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for B250K Pot that you consider buying. Your questions might include the following:

  • Is it worth buying an B250K Pot?
  • What benefits are there with buying an B250K Pot?
  • What factors deserve consideration when shopping for an effective B250K Pot?
  • Why is it crucial to invest in any B250K Pot, much less the best one?
  • Which B250K Pot are good in the current market?
  • Where can you find information like this about B250K Pot?

We’re convinced that you likely have far more questions than just these regarding B250K Pot, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for B250K Pot, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible B250K Pot. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an B250K Pot buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available B250K Pot currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of B250K Pot has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an B250K Pot?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your B250K Pot.
  5. Customer Ratings: Number ratings grade B250K Pot objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their B250K Pot.
  7. Product Quality: You don’t always get what you pay for with an B250K Pot, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an B250K Pot is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining B250K Pot information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding B250K Pot is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: