The Best Battery Memory Saver Automotive of 2023 – Reviewed and Top Rated

2,920 Reviews Scanned

SaleRank No. #1

VSTM OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver (3Meter) with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Extension Socket

Compared by most of OBD metal pins in market with zinc plating, ours are gold plating. Better reliable on contact and electric transmission. Compared by most of OBD II Memory Saver (or Automotive Computer Memory Saver) in market with 3 ~ 5 ft in cable length, ours with super long 10 ft (3meters) cable. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand
8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one.
Late-model vehicles, however, rely on computers that operate everything from the stereo to the transmission. If power is lost to the computer, the settings are lost and have to reset to default. That means the vehicle may feel different when driven, and you may have to enter a security code to access the stereo.
Using this simple memory saving device when replacing your car battery will help you avoid these problems. This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
As our device with 3 meter cable, it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. You can replace the battery.

Rank No. #2

Battery Memory Saver | >> Save : Computer Code, Radio Code, OBD11 | Code 12 Volt Attaches to Power PortCar/Truck/Van

SAVES all drive-ability codes and settings when disconnecting/changing a vehicle's starter battery. It also protects settings and codes for anti-theft radios, clocks, key less entry systems, and much more.
Plugs into vehicle's 12 volt power receptacle ( 9 Volt battery Not Included )
Uses 9 volt battery (Not Included)
SAVES all drive-ability codes and settings when disconnecting/changing a vehicle's starter battery. It also protects settings and codes for anti-theft radios, clocks, key less entry systems, and much more.
Retains radio presets, ECM codes, and learned procedures for up to four hours

Rank No. #3

EZRED MS4000 Automotive Memory Saver With Built In Charger , Black

Memory saver & charger: The MS4000 saves all drive-ability codes & settings when disconnecting/changing a vehicle's starter battery. It also protects settings & codes for anti-theft radios, clocks, keyless entry systems & much more.
Charges batteries: A 12 volt, 4.5 amp hour sealed lead acid battery is included inside the unit. The direct wired OBDII connector plugs directly into the vehicles OBDII port.
Protects & saves: This unit is protected by a 4 amp circuit breaker & can be used for anti-theft radios, clocks, keyless entry systems, alarms, cell phone settings, GPS Memory, TPMS & other memory-related functions.
Innovation at its finest: We make high quality hand tools & accessories, tool organizers, ratchet sets, LED flashlights & work lights. We specialize in tools for battery, heating & electrical work, for both the professional tradesperson and home DIY'er!

SaleRank No. #4

JEUCLEL USB Powered Vehicle OBD II Connector Memory Saver with Buzzer, Car ECU Emergency Power Supply Cable, Automotive Battery Replacement/Disconnect Tool, Save Settings During Battery Removal

【Memory Saver】 Protect memory during car battery change, prevent reset settings, such as car dashboard information, digital clock, stereo, memory seats, ABS, etc.
【Danger of Power Outage】 Replacing the car battery when there is no backup power supply may not only lose various memories of the car, but may also cause display abnormalities. In addition, the restoration may require readjustment at the dealer. With this tool, you don't have to worry about that.
【USB Powered】 The memory protector works with USB power supply. Only a USB mobile power supply with sufficient power is needed to perfectly complete the task of replacing the battery. Compared with similar products that use alligator clips to connect to the backup power supply, it is more stable, more convenient, and greatly reduces the difficulty of operation.
【Indicators and Buzzer】The new version of the memory retention period has 3 indicators and 1 buzzer, which can give warnings in many situations. Memory Saver operates in the cab, and battery replacement must be done in front of the vehicle. The buzzer will remind you when the USB power is low, so you can concentrate on your work.
【Quality】 This tool is made of new PVC material, eco-friendly material, non-toxic and tasteless. High quality can be guaranteed and a longer service life can be ensured.

Rank No. #5

ALLOSUN All-Sun GK504 Automotive Setting Keeper Auto Vehicle Computer Memory Saver, 1 Pack

Ruggedly designed hard plastic body
Offering a convenient, easy way to save memory data of on-board computers
Featuring convenient ability to plug into any vehicle cigarette lighter
Includes a rugged cable designed for durability
Requires 9-volt Alkaline battery (not included)

SaleRank No. #6

Clore Automotive SOLAR ESA30 OBD II Memory Saver Connector

Turns any jump starter with a 12v power port into a memory saver
Interface connector between a jump starter and a vehicle's OBD II port
Prevents electronic memory loss when disconnecting a vehicle's battery
LED confirms a proper connection has been made to the OBDII port

SaleRank No. #7

OLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable

Cigarette Lighter with Alligator to OBD2 16 Pin Male Connector Power Cable :Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.Plug it into the OBD Male connector of the vehicle, plugging the cigarette connector into the clip cords, hooking it up to a 12V battery source.Note:This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
Super Long 10ft (3meters) Cable: plenty long until you try connecting it to another car's battery or cigarette lighter. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand.
8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one.
Work no problem as all ODBII ports :It works on any vehicle with OBDII which is 1996 and later (You will be plugging one end into it). It is not needed or required to change your battery. It is used to keep the memory of you radio setting and other memory computer controlled devices on the vehicle (EMCU for example.) It is used as a convenience as to not erase the memory.
EASY TO REPLACE :Should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery.

SaleRank No. #8

Schumacher OBD-L Memory Saver Detector - Save Your Vehicle Settings During Battery Removal

SAVE ON-BOARD DATA: Save settings and data from your vehicle’s microprocessor-controlled devices when your battery is disconnected
MEMORY SAVER DETECTION: No-fuss design automatically identifies vehicle compatibility
FUSE-PROTECTED: Standard fuse-protected aux input plug offers reliable connection
EASY ATTACHMENT: Attach between a portable power unit and a vehicle’s On-Board Data (OBDII) diagnostic port
LED INDICATORS: Colored LED indicator lights with printed instructions on the unit for ease of use

Rank No. #9

vgate OBD II Memory Saver Connector with Two 2 Alligator Clips

🔋 【Avoid Information Loss】- Prevents electronic memory loss when disconnecting a vehicle's battery. Keep the car computer memory dashboard information, acoustics, memory seats, digital clock etc. Preserves vehicle codes and electronic presets.
🔋 【Design】- Red clip link back-up battery positive, negative black negative. Interface connector between a 12V DC power source and vehicle's OBD2 port.
🔋 【Easy to Use】Plug and play, Vgate ECU Memory Saver can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car's DC 12V power outlet.
🔋 【Safety & Protective】- 8 amp fuse built Into the memory saver, better reliable on overload protection.
🔋 【Good Quality】- The use of environmentally friendly high-quality materials, no odor non-toxic ingredients, tough and soft wear resistance, not winding, environmental protection and durability.

Rank No. #10

Powerbuilt 648539 Computer Memory Keeper

For maintaining voltage continuity to engine computer, clock and radio memory when vehicle battery is disconnected
Retains radio presets, ECM codes and learned procedures up to four hours
Plugs into vehicle's cigarette lighter outlet
Maintains voltage continuity to engine computer, clock and radio memory
Retains radio presets, ECM codes and learned procedures up to four hours

Rank No. #11

OBD ll Connector Vehicle Memory Saver Reliable and Easy 9 Volt Battery Powered

Much more reliable than with similar 12v/Cigarette outlet models
Safe voltage blocking diode installed for safe 9 volt battery use
For maintaining voltage continuity to engine computer, clock and radio memory when vehicle battery is disconnected
Instructions are included for perfect results------- Uses 9 volt battery (Not Included)

Rank No. #12

OLLGEN 3M/9.8ft Car OBDII Vehicle ECU Emergency Power Supply Cable Car Memory Save Any 12V DC Power Source OBD Male Connector Cable Adapter

Cigarette Lighter to OBD2 16 Pin Male Connector Power Cable : This 3m/9.8ft cable is 12V in Male OBD out adapter you can use it to connect to an OBD II in a car.
Interface connector between a 12V DC power source and vehicle's OBD II port :Compatible all OBD2 diagnostic tools with a 16 pin socket .
Powered up OBD2 device : This Cigarette lighter to OBD2 16pin male power cable can preserve vehicle codes and electronic presets , and it also can save you radio information.This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery or another car’s DC 12V power outlet.
Compatible with most of OBD II Memory Saver (or Automotive Computer Memory Saver) in Current Market : Use this to power your HUD without having to plug into OBD port (the HUD usually plugs into the OBD port for power). Use this cable to power any OBD port powered devices that don't need to talk to the car.
Great Product :High-quality materials can make the cable Sturdy and flexible.

Rank No. #13

Schumacher SEC-12V-OBD Memory Saver Adapter Cable - 12V - Save Your Vehicle Settings During Battery Removal

3 feet long cable assembly that plugs an external power source into the vehicle's OBDII port
Lightweight and easily transportable
Preserves the stored fault codes and programmed electronic settings such as clocks, seat positions, and alarms

Rank No. #14

sooloon OBD2 Car Memory Saver Protection Connector OBD II Automotive Battery Computer ECU Power Off Vehicle Battery Detection Tool Kit 12V SAE Quick Release Adapter Supply Cable with 5A Fuse, S211110

The dual digital display battery change tool uses environmentally friendly ABS high-quality materials, no peculiar smell, high-strength high-quality copper wire, silicone flame-retardant cable, the cable length is 1 meter/3.3 feet (approximately), its flexibility is not easy to burn, and the insulation is good Tangled, environmentally friendly and durable. After testing, the output and input power are normal to ensure that the product is qualified.
The dual digital display battery change tool can retain the dashboard information, audio, storage seat, digital clock, etc. of the car computer. It will not change the speaker and the anti-theft device will not be jammed and will not display a fault code. Retaining the vehicle code and electronic presets can prevent information loss when the on-board computer is powered off. Save time and high efficiency, it is a good helper to replace car battery.
This device can be used with any 12V DC power supply, including trip starter, DC 12V lead-acid battery or other car DC 12V power socket. The power management system with core processor, the voltage and current are displayed at the time, the red displays the voltage, and the green displays the current. Using this simple memory saving device when replacing the car battery will help you avoid these problems and solve many problems first-line.
It can display the current (it can be used for leakage detection and can understand the quiescent current of the car in the starting state). It can display the battery voltage (to prevent the use of a battery that is depleted, which can not achieve the purpose of continuously replacing the battery). Reverse connection protection (red light to remind after reverse connection) over current protection (with 5A fuse) wrong connection protection, will reverse connection protection.
Clamp the battery clip reliably to the positive and negative poles of the spare battery (the red clip is connected to the positive electrode, and the black is connected to the negative electrode). Connect the tool’s OBD socket to the vehicle’s OBD interface. If successful, the green LED will turn on. The dual digital display car battery is constantly changing the battery and the car maintenance tools are convenient to use. A nice gift for relatives and friends.

Rank No. #15

Autel MaxiBAS BTMS OBDII Battery Tester Memory Saver Preserves Vehicle Codes Electronic Presets Provides Power to Vehicle’s Computer Maintain Data Surge Protection Attaches to 12 Volt Backup Battery

📌Autel MaxiBAS BTMS battery tester memory saver is a polarity-protected cable that 👉attaches to a 12 Volt backup battery to 👉provide power via the OBDII/EOBD port to onboard electronics while the vehicle's battery is disconnected.
📌The Autel OBDII Memory Saver preserves vehicle codes and electronic presets when replacing the battery, preventing vehicle data loss and saving the time and effort of re-coding systems.
📌Autel MaxiBAS BTMS enables the vehicle's computer to be powered and maintain data when connected to vehicle's backup battery.
📌Connects to the vehicle via OBDII and the 12 volt battery with alligator clips.
📌Features surge protection and three LEDs to indicate power supply status. One-Year Limited Warranty. If you have any question about the product, please feel free to contact 📧 mobobaohe@163. Com 📧.

Rank No. #16

allsun Car Memory Data Saver OBD2 Automotive Emergency Power Supply Battery Adapter Protection Connector Memory Saver Adapter Cable Keep Memory Alive for Cars 2 Alligator Clips Cigarette Lighter

Car Memory Saver OBD2, has red clip link back-up battery positive, negative black negative.Prevents electronic memory loss when disconnecting a vehicle's battery preserves vehicle codes and electronic presets.
Car Memory Keeper, Alligator clip car charger, you can use this Car Data Saver to keep your car's computer powered through the OBD-II port or the cigarette lighter socket on the car while you replace the car's storage battery. The Car Data Saver needs an additional 12V storage battery as a temporary power source. It is a very useful tool for car service.
Memory Saver Automotive, the Emergency Power Interface without super long 6.5 ft (2meters) cable(Not includes). In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand.
Memory Saver Adapter Cable,as our device without 2 meter cable, 2 meter cable will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. And now you can replace the battery.
Vehicle Memory Saver, great for keeping the computer memory alive while working on the car. Many repairs need to disconnect the battery and this connected to an external power source. It has a fuse ф5×20 5A 250V.

SaleRank No. #17

Jtron OBD II Vehicle ECU Emergency Power Supply Cable Car Diagnostic Cable Memory Saver (3Meter) with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Extension Socket

◆Late-model vehicles. rely on computers that operate everything from the stereo to the transmission. If power is lost to the computer, the settings are lost and have to reset to default. That means the vehicle may feel different when driven, and you may have to enter a security code to access the stereo.
◆As our device with 3 meter cable, it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. And now you can replace the battery.
◆Using this simple memory saving device when replacing your car battery will help you avoid these problems. This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car's DC 12V power outlet.
◆8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets.
◆Compared by most of OBD metal pins in market with zinc plating, ours are gold plating. Better reliable on contact and electric transmission. Compared by most of OBD II Memory Saver (or Automotive Computer Memory Saver) in market with 3 ~ 5 ft in cable length, ours with super long 10 ft (3meters) cable. Also by get the alternative 12V power source from another car, when you not have a jump starter on hand.

Rank No. #18

2023 New Autel MAXIBAS BTMS OBDII Battery Tester Memory Saver Preserves Vehicle Codes and Electronic Presets,Power The Onboard Computer, Connected to a 12-Volt Backup Battery, Three LED Status Lights

👍The Autel MAXIBAS BTMS OBDII Memory Saver is a must-have tool for any automotive technician or do-it-yourselfer.This polarity-protected cable connects to your vehicle's 12-volt backup battery, providing power to the onboard electronics via the OBDII/EOBD port. It prevents vehicle data loss and saves you the time and effort of re-coding systems, ensuring smooth operation of your vehicle.
👍The Autel OBDII Memory Saver preserves vehicle codes and electronic presets when replacing the battery,preventing vehicle data loss and saving the time and effort of re-coding systems.
👍Connecting to the vehicle via OBDII and to a 12-volt battery with alligator clips, it's perfect for use in any repair or maintenance situation.
👍Autel MaxiBAS BTMS enables the vehicle's computer to be powered and maintain data when connected to vehicle's backup battery.
👍Autel MAXIBAS BTMS Features surge protection and three LEDs to indicate power supply status. One-Year Limited Warranty. If you have any question about the product, please feel free to contact 📧 [email protected]📧.

Rank No. #19

OBD2 Car Memory Saver Protection Connector Automotive Battery Computer ECU Power Off Protector Vehicle Replacement Battery Leak Detection Tool 12V SAE Quick Release Adapter Supply Cable

【Quality】 The dual digital display battery change tool uses environmentally friendly ABS high-quality materials, no peculiar smell, high-strength high-quality copper wire, silicone flame-retardant cable, the cable length is 1 meter/3.3 feet (approximately), its flexibility is not easy to burn, and the insulation is good Tangled, environmentally friendly and durable. After testing, the output and input power are normal to ensure that the product is qualified.
【Car dual digital display device】-This device can be used with any 12V DC power supply, including trip starter, DC 12V lead-acid battery or other car DC 12V power socket. The power management system with core processor, the voltage and current are displayed at the time, the red displays the voltage, and the green displays the current. Using this simple memory saving device when replacing the car battery will help you avoid these problems and solve many problems first-line.
【Avoid loss of information]】The dual digital display battery change tool can retain the dashboard information, audio, storage seat, digital clock, etc. of the car computer. It will not change the speaker and the anti-theft device will not be jammed and will not display a fault code. Retaining the vehicle code and electronic presets can prevent information loss when the on-board computer is powered off. Save time and high efficiency, it is a good helper to replace car battery.
【Function】 It can display the current (it can be used for leakage detection and can understand the quiescent current of the car in the starting state). It can display the battery voltage (to prevent the use of a battery that is depleted, which can not achieve the purpose of continuously replacing the battery). Reverse connection protection (red light to remind after reverse connection) over current protection (with 5A fuse) wrong connection protection, will reverse connection protection.
【Extensive use instructions】 Clamp the battery clip reliably to the positive and negative poles of the spare battery (the red clip is connected to the positive electrode, and the black is connected to the negative electrode). Connect the tool’s OBD socket to the vehicle’s OBD interface. If successful, the green LED will turn on. The dual digital display car battery is constantly changing the battery and the car maintenance tools are convenient to use. A nice gift for relatives and friends.

Rank No. #20

OLLGEN 1.5M 5ft OBD2 Automotive Battery Replacement Tool,OBD to 12V Auto Car Computer Power Off Memory Saver Cable,Digital Display OBD II Battery Leakage Detective Kit wth 5A Fuse

Wide Application : Using this auto car memory saver tool, the clock will not change, the speaker and anti-theft will not stuck, the glasses and throttle valve will not be set, and the alarm light will keep going without fault code.
LED Indicator Light Digital Display: This obd2 automotice battery replacement tool can voltage and current. it can prevent the use of batteries that are deficient in electricity, can not reach the purpose of continuous battery replacement ,and it also can be used for leakage detection, can also understand the quiescent current of the car in the non-start status.
Overcurrent Protection (with 5A fuse): Current clip anti-reverse connection protection (digital tube will not light up after reverse connection, and no electricity)
For Car With 12V Battery Only ,Leakage is not more than 5A.Voltage and current are automatically cycLED
Reverse-Connection Protection: If power input with incorrect polarity, the electric power will not be connected to your car .Cable Length is 1.5M/5ft

Last update on 2023-08-10 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Battery Memory Saver Automotive?

Do you get stressed out thinking about shopping for a great Battery Memory Saver Automotive? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Battery Memory Saver Automotive, which is why we have assembled a comprehensive list of the greatest Battery Memory Saver Automotive available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Battery Memory Saver Automotive that you consider buying. Your questions might include the following:

Is it worth buying an Battery Memory Saver Automotive?
What benefits are there with buying an Battery Memory Saver Automotive?
What factors deserve consideration when shopping for an effective Battery Memory Saver Automotive?
Why is it crucial to invest in any Battery Memory Saver Automotive, much less the best one?
Which Battery Memory Saver Automotive are good in the current market?
Where can you find information like this about Battery Memory Saver Automotive?

We’re convinced that you likely have far more questions than just these regarding Battery Memory Saver Automotive, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Battery Memory Saver Automotive, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Battery Memory Saver Automotive. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Battery Memory Saver Automotive buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Battery Memory Saver Automotive currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Battery Memory Saver Automotive has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Battery Memory Saver Automotive?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Battery Memory Saver Automotive.
Customer Ratings: Number ratings grade Battery Memory Saver Automotive objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Battery Memory Saver Automotive.
Product Quality: You don’t always get what you pay for with an Battery Memory Saver Automotive, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Battery Memory Saver Automotive is should be an indication of how long it will work out for you.

We always remember that maintaining Battery Memory Saver Automotive information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Battery Memory Saver Automotive is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Battery Memory Saver Automotive of 2023 – Reviewed and Top Rated

How Do You Buy The Best Battery Memory Saver Automotive?

Related Post: