The Best 3S Bms of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best 3S Bms of 2022. Check our ranking below.
2,902 Reviews Scanned
Rank No. #1
2Pcs 3S 11.1V 12.6V 25A W/Balance 18650 Li ion Lithium Battery PCB Protection Board
- Over voltage range: 4.25-4.35v ± 0.05v; Over discharge voltage range: 2.3-3.0v ± 0.05v
- Maximum operating current: 0-25A ;Maximum transient current: 34-40A
- Wiring:(please check the picutre 3 wiring diagram)Strictly according to the diagram wiring: 0V(B )3.7V(B1)7.4V(B2)11.1V(B+), Do not deliberately short circuit. After the line is connected, Need to charge first, then have output.
- When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same. If not same, please fill in each set of batteries and then use. Do not mix the good battery and the battery.
- Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
Rank No. #2
QCCAN 3S 40A 12.6V Li-ion Lithium Battery Protection Board PCB BMS Charger Protection Circuit for Drill Motor (3S 40A)…
- High Quality; Compact size and lightweight;High-accuracy voltage detection circuit; fine workmanship and durable; stable performance.
- Multiple Protections: Over-discharge protection, overcurrent protection, overcharge protection; High charge and discharge current
- LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.
- Applications: applicable to the nominal voltage of 3.7V, fully charged 4.2V lithium battery (including for 18650, for 26650, polymer lithium battery), can be drilled below 170W（Operation notes on the details page）.
- Package included: 4pcs 3 string 12.6V 40A lithium battery protection board
Rank No. #3
Anmbest 5PCS 3S 11.1V/12V/12.6V 10A 18650 Charger PCB BMS Protection Board for Li-ion Lithium Battery Cell
- High-accuracy voltage detection circuit, fine workmanship and durable.
- Highlight: Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection; Compact size and lightweight.
- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit)
- MOS transistor can control the battery charge and discharge, low standby current consumption.
- Applications: Massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitor standby power supply, etc.
Rank No. #4
Alinan 8pcs 3S 12V 10A 18650 BMS Lithium Battery Charger Protection Board 10.8V 11.1V 12.6V Anti-Overcharge/Over-Discharge/Over-Current/Short Circuit
- 【Application】: The power range described is applicable to the following products: vacuum cleaner, massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitoring standby power supply, etc.
- 【Function】: With overcharge, over discharge, over current, short circuit and other protection functions, for a variety of shapes of various shapes 3.7V lithium battery.
- 【Charger Voltage Setting】: Use your battery pack number *4.2V This is the charging voltage of the non-ferrous lithium battery. The charging voltage of the iron-lithium battery is the number of battery strings *3.60V, and the charging current standard is 0.2 times of the capacity.
- ★This protection board can not be used for iron ion polymer battery, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, 2 pieces and 24V series, 775 (4A) or above motor, 1W fisheye LED lamp.
- ★The selected protection board current should not be less than the controller current limit of the product you are using. Lithium battery should be charged with lithium battery special charger.
Rank No. #5
ALMOCN 5PCS 3S BMS Module 12V 10A 18650 Lithium Battery Protection Board Charger Module
- Can be applied to various 3.7V lithium core.
- High-accuracy voltage detection circuit, fine workmanship and durable,compact size and lightweight.
- Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection functions.
- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit)
- Applicable to : vacuum cleaner, massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitoring standby power supply, etc.
Rank No. #6
Comidox 3S 12V 10A 18650 Lithium Battery Protection Board BMS Li-ion Charger Protection Module Anti-Overcharge/Over-Discharge/Over-Current/Short Circuit 3Pcs
- The power range described is applicable to the following products: vacuum cleaner, massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitoring standby power supply, etc.
- With overcharge, over discharge, over current, short circuit and other protection functions, for a variety of shapes of various shapes 3.7V lithium battery.
- High quality MOSFETs such as VISHAY, AOS, IR, etc., FR-4 low temperature coefficient sheet, well designed and tested.
- It is small in size and suitable for many applications requiring high integration and low cost. It can meet various performance requirements and ensure the absolute safety and reliability of the battery pack.
- This protection board can not be used for iron ion polymer battery, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, 2 pieces and 24V series, 775 (4A) or above motor, 1W fisheye LED lamp.
SaleRank No. #7
ZZHXSM PCB BMS Protection Module 2PCS 3S 11.1V 12V 12.6V 25A 18650 Li ion Lithium Battery PCB Protection Boards with Balanced Circuit Over Charge Discharge Over Current Protection
- Overvoltage range: 4.25V-4.35V +/-V0.05V. Overdischarge voltage range: 2.3V-3.0V +/- 0.05V.
- Maximum working current: 0-25A. Maximum transient current: 34-40A.
- Wiring: (please see the wiring diagram in Figure 3) Strictly follow the wiring diagram: 0V(B)3.7V(B1)7.4V(B2)11.1V(B+), do not short-circuit intentionally. After the line is connected, it needs to be charged first, and then output.
- When 3 sets of batteries are connected in series, please make sure that the voltage of each battery is the same. If it is not the same, please fill in each battery and use it. Don't mix good batteries with batteries.
- Note: Do not mix good batteries with inferior batteries. The closer the internal resistance of the battery capacity, the better.
Rank No. #8
AITIAO 4PCS 3S 60A 11.1V 12V 12.6V 18650 Lithium Battery Charger PCB BMS Protection Board with Balance Li-ion Lithium Battery Charger Lipo Cell Module for Drill Motor
- Charging voltage: DC 12.6V-13V; Continuous charging current 20A, continuous discharge current 40A, instantaneous current below 80A.
- During using the process, the heat dissipation conditions should be good. If the heat dissipation conditions are not good, please reduce the current usage and do not let the board has a noticeably hot feeling.
- This product is used to charge/discharge three groups of lithium batteries in series, and each group can connect multiple lithium batteries in parallel.
- During charging and discharging, it has overcharge protection, overdischarge protection, and overcurrent protection, short circuit protection.
- This product can be used in electric drills, sprayers, LED lights, low power reverse. Charge and discharge batteries of transformers and other products.
Rank No. #9
Diitao 7PCS Lithium Battery Board,BMS Li-ion Charger Module Anti-Overcharge/Over-Discharge/Over-Current/Short Circuit (3S 20A)
- Applicable to the following products: vacuum cleaner, massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitoring standby power supply, etc.
- With overcharge, over discharge, over current, short circuit and other functions, for a variety of shapes of various shapes 3.7V lithium battery.
- It is small in size and suitable for many applications requiring high integration and low cost.
- It can meet various performance requirements and ensure the reliability of the battery pack.
- This board cannot be used for iron ion polymer battery, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, 2 pieces and 24V series, 775 (4A) or above motor, 1W fisheye LED lamp.
Rank No. #10
AEDIKO 6pcs 3S 20A BMS 18650 Li-ion Lithium Battery Charger Module BMS Protection Board PCB 11.1V 12V 12.6V Module Over-Discharge/Over-Current
- 3S 20A BMS:Maximum Output Current: 20A;Quiescent Current: <30uA
- High Accuracy Voltage Detection Circuit, Fine Workmanship and Durable
- Charging Voltage: 12.6V;Continuous Discharge Current (upper limit) : 20A (When the Heat Dissipation Environment is NOT Good,Please Reduce the Load Current )
- It can Meet Various Performance Requirements and Ensure the Absolute Safety and Reliability of the Battery Pack
- Applications:Vacuum Cleaner,Massager Battery Pack, LED Light Backup Power Supply,12V Electronic Products, Solar Street Light Battery Pack, Monitoring Standby Power Supply etc.
Last update on 2023-09-09 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best 3S Bms?
Do you get stressed out thinking about shopping for a great 3S Bms? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 3S Bms, which is why we have assembled a comprehensive list of the greatest 3S Bms available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 3S Bms that you consider buying. Your questions might include the following:
- Is it worth buying an 3S Bms?
- What benefits are there with buying an 3S Bms?
- What factors deserve consideration when shopping for an effective 3S Bms?
- Why is it crucial to invest in any 3S Bms, much less the best one?
- Which 3S Bms are good in the current market?
- Where can you find information like this about 3S Bms?
We’re convinced that you likely have far more questions than just these regarding 3S Bms, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 3S Bms, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 3S Bms. Make sure that you are only using trustworthy and credible websites and sources.
We provide an 3S Bms buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 3S Bms currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 3S Bms has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 3S Bms?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 3S Bms.
- Customer Ratings: Number ratings grade 3S Bms objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 3S Bms.
- Product Quality: You don’t always get what you pay for with an 3S Bms, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 3S Bms is should be an indication of how long it will work out for you.
We always remember that maintaining 3S Bms information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 3S Bms is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.