The Best Obd2 Bluetooth Pin of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Obd2 Bluetooth Pin of 2022. Check our ranking below.
2,966 Reviews Scanned
- Ultra low profile design for hard to reach spots. Supports all standard OBD 2 protocols and 16-pin Pass-through for all OBD2 Vehicles.
- 50cm/20inch/1.6ft Length 1 Male 16 pin J-1962 and 2 x Female 16 pin J-1962 low profile extension connectors with Individually Power switch avoid battery drain and damage
- Direct pass through on pins 2, 4, 5, 6, 7, 10, 14, 15, 16 ,Ideal for use with GPS trackers for the most discrete instalations.
- This OBD2 splitter Cable will allow you to split out one OBD II port into Three OBD II devices to the vehicle at the same time to save more room
- Revolutionary flat flexible design allows to route the cable where you need it
- OBD2 16 Pin Splitter Cable: Ultra Flat OBD2 Cable ,Easy to carry and use,100% Brand new and high quality
- High-quality materials give the cable superior flexibility and durability
- Economic: 2 in 1 Female to Male /Female,Super convenient,Easy install
- Compatible diagnostic scanner tools with a 16 pin socket
- Use OBD extension cable can save the wear and tear on your scan tool's OBD connector
- Obd2 16pin male to female cable
- 16PIN obd2 male to female Y cable is available to test cars for Two OBD diagnstic tool at the same time, it is the standard OBD 16 Pin Universal diagnostic interface.
- The obd2 16pin ectension cable allows you to connect compatile diagnostic tools with a 16 pin socket.
- Please Note: 1.Not compatible with iOS system(Cannot be used with iPhone/iPad). 2. NOT for Diesel, New Energy (including Hybrid & Electric), and Modified Vehicles. 3. For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
- Mainly used with Android phones and tablets, but also can be used with Symbian phones and Windows PCs. After the device is successfully connected to OBDII, you need to download a third-party OBDII APP on your phone or tablet, such as Recommended Apps: Torque Pro, Torque Lite (free), OBD Car Doctor (free), etc. on Google Play. Please note that some apps may be charged. There are various Apps and installation instructions provided on the CD. You can run the CD to select the appropriate App.
- Any question, please email us, we will reply within 24 hours. We provide 3 months quality guarantee, and we will give you a refund or send you a replacement if you are not satisfied with our product. (please click our store address "MESatr outdoor" on the product page and then click "Ask a question", then you can contact us by e-mail.)
- The device works on OBD2 gasoline cars (1998 and newer cars in the USA), and EOBD cars (cars from Europe, gasoline cars from 2001). Bluetooth connection, no Batteries, Cables, or Switches. - Wireless (Bluetooth) 5 ~ 10 meters.
- How to use: Plug the device in your car's OBD2 port, start the car, enable Bluetooth on your Android phone or tablet, search for "OBDII" and pair with it (pin 1234), run the downloaded App with simple settings and wait until it connects your car's ECU successfully. If you use the same OBD on 2 or more cars, you need to disconnect Bluetooth and close App when finish testing one car, and re-match the Bluetooth when you insert the OBD into another car.
- 8 pin pass through,length 60cm.Unique low profile design is ideal for any application where space is tight.
- OBD2 Male to Female Extension.
- Compatible diagnostic tools with standard 16 pin socket
- Flexibility and durability for use.
- Multiple cables can be daisy-chained together to achieve longer length.
- This cable plug fit perfectly into all ODB2 Port and perfect extension to run diagnostic tool,obd2 scanner,GPS,Wi-Fi Bluetooth Code Reader,HUD,ODB2 dongle etc.
- 30cm 12" Long it's perfect length to prevent kicking whatever device you want to leave plugged in and hide the connect device behind the steering column and makes it invisible to thieves.
- The right-angle plug is what is attached to the vehicle and provides a very low profile and keeps the cable out of the way.
- Easy To Use Plug and play. Easy to change different car computer diagnostic scanner for your vehicle, just plug obd extender and protect your obd2 socket.
- High-quality and environmentally sturdy plastic material gives it the excellent insulation, flexibility and durability and cannot be easily broken and worn.
- ♩♩♩The right-angle plug is what is attached to the vehicle and provides a very low profile and keeps the cable out of the way.
- ♩♩♩30cm 12" Long it's perfect length to prevent kicking whatever device you want to leave plugged in and hide the connect device behind the steering column and makes it invisible to thieves.
- ♩♩♩The 90 degree connector keeps it tucked under the dash nicely instead of poling out.This obd2 cable plug fit perfectly into all ODB2 Port and perfect extension to run diagnostic tool,obd2 scanner,GPS,Wi-Fi Bluetooth Code Reader,HUD,ODB2 dongle etc.
- ♩♩♩Plug obd extender and protect your obd2 socket.Using this as an extender for a OBD port performance add on for your car and works without any issue at all. Fits snug, keeps connection, and allows you to stash the performance plug out of site.
- ♩♩♩Before ordering, locate the OBD 2 port in your car and decide what connector style will fit - T, straight, or L.Actually work with both of 24v Truck and 12v Car.
- This is palm size 4" in x 3" inch x 1" inch 1 to 3 OBD splitter adapter, it's fit perfectly into all ODB2 Port and perfect extension to run diagnostic tool,obd2 scanner,GPS,Wi-Fi Bluetooth Code Reader,HUD,ODB2 dongle etc.
- It can run 3 separate things of the OBD simultaneously,Pocket size, to prevent kicking whatever device you want to leave plugged in and hide the connect device behind the steering column and makes it invisible to thieves.
- 1 male to 3 female OBDII splitter converter adapter, it's attached to the vehicle and provides a very low profile and keeps the cable out of the way.
- Easy To Use Plug and play. Easy to change different car computer diagnostic scanner for your vehicle, just plug obd extender and protect your obd2 socket.
- High-quality and environmentally sturdy plastic material gives it the excellent insulation, flexibility and durability and cannot be easily broken and worn.
- This 6pin motorbike OBD cable works with various programs / apps and even with standard OBD2 readers.
- With this 6-pin to OBD2 adapter cable you can connect your ktnn motorcycle with a Kline or Canbus compatible OBD2 diagnostic interface or ELM327 scanner.
- After connect this 6pin motorcycle cable to programs / apps, then you can read / delete the fault memory, Reading of live engine data such as speed, rpm, temp, O2 sensor data, emissions, voltages, etc.
- This 6pin motorbike OBD cable is compatible with many of ktnn Kline and Canbus Motorcycles,please refer to below descriptions for the details supported motorbike models.
- 3 years quality warranty.
- This 4pin motorbike OBD cable works with various programs / apps and even with standard OBD2 readers.
- With this 4-pin to OBD2 adapter cable you can connect your Yama ha motorcycle with a Canbus compatible OBD2 diagnostic interface or 327 scanner.
- After connect this 4pin motorcycle cable to programs / apps, then you can read / delete the fault memory,Reading of live engine data such as speed, rpm, temp, O2 sensor data, emissions, voltages, etc.
- This 4pin motorbike OBD cable is compatible with many of Yama haaa Canbus Motorcycles, details please refer to below descriptions.
- 3 years quality warranty.
Last update on 2022-10-31 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Obd2 Bluetooth Pin?
Do you get stressed out thinking about shopping for a great Obd2 Bluetooth Pin? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Obd2 Bluetooth Pin, which is why we have assembled a comprehensive list of the greatest Obd2 Bluetooth Pin available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Obd2 Bluetooth Pin that you consider buying. Your questions might include the following:
- Is it worth buying an Obd2 Bluetooth Pin?
- What benefits are there with buying an Obd2 Bluetooth Pin?
- What factors deserve consideration when shopping for an effective Obd2 Bluetooth Pin?
- Why is it crucial to invest in any Obd2 Bluetooth Pin, much less the best one?
- Which Obd2 Bluetooth Pin are good in the current market?
- Where can you find information like this about Obd2 Bluetooth Pin?
We’re convinced that you likely have far more questions than just these regarding Obd2 Bluetooth Pin, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Obd2 Bluetooth Pin, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Obd2 Bluetooth Pin. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Obd2 Bluetooth Pin buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Obd2 Bluetooth Pin currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Obd2 Bluetooth Pin has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Obd2 Bluetooth Pin?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Obd2 Bluetooth Pin.
- Customer Ratings: Number ratings grade Obd2 Bluetooth Pin objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Obd2 Bluetooth Pin.
- Product Quality: You don’t always get what you pay for with an Obd2 Bluetooth Pin, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Obd2 Bluetooth Pin is should be an indication of how long it will work out for you.
We always remember that maintaining Obd2 Bluetooth Pin information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Obd2 Bluetooth Pin is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: How do I connect a Bluetooth device to my OBD-II port?
A: In terms of the basic rundown on the general steps, you can: 1 Plug the Bluetooth device into the OBD-II port 2 Allow the device to scan for possible connections (as you would for a normal bluetooth connection) 3 Choose the scan tool (ELM327) 4 Input the pair code
Q: What are the pins on an OBD 2 connector?
A: OBD-2 connector must have pins 4, 5 for ground connections and pin 16 for 12 volt power supply from the vehicle battery. What is OBD DTC? Prior to OBD, auto manufacturers did not standardize DTC’s (diagnostic trouble code).
Q: What is the best Bluetooth OBD2 scanner for Android?
A: 1. Editor’s Pick: BAFX Products Bluetooth Diagnostic OBD2 Scanner 2. BlueDriver Professional OBD2 Scan Tool 3. Foseal WiFi OBD2 Scan Tool 4. Veepeak WiFi OBD2 Scanner Adapter 5. Kitbest Bluetooth OBD2 Scanner and Adapter for Android
Q: Where is the OBD2 connector on a Honda Accord?
A: Some connectors have been located behind ashtrays, under the passenger seat and even over by the passengers door. OBD-2 connector must have pins 4, 5 for ground connections and pin 16 for 12 volt power supply from the vehicle battery. What is OBD DTC?