The Best Blade Inductrix Fpv Battery Upgrade of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Blade Inductrix Fpv Battery Upgrade of 2023. Check our ranking below.

2,428 Reviews Scanned

Rank No. #1

PowerHobby 1s 250mAh 45C 8-Pack Flight Time and Power Battery Upgrade - Fits All: Blade Nano QX QX FPV Tiny Whoop UMX Radian Blade Inductrix Champ Sport Cub S Nano CP S Inductrix FPV

Rank No. #2

Upgrade 1S LiPo Battery USB 3.8V/4.35V Charger 6 Channel 1S LiHV Charger for EMAX Tinyhawk Blade Inductrix Tiny Whoop Inductrix FPV Plus Battery Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

ONLY support LiHV 3.8V/4.35V 1S battery, not for 3.7V/4.20V 1S LiPo battery
Support 0.2A/0.6A charge current by switch button （ Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2）
USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.

Rank No. #3

4pcs 250mAh 1S LiPo Battery 3.7V 30C Blade Inductrix Battery Micro JST 1.25 Connector for Kingkong Tiny 6 Tiny Whoop FPV Racing Drone

[Dimension] - High capacity of 250mAh 30C, Small size of 55x11x5mm, is the great choice of Tiny Whoop FPV Racing Drone
[Upgraded Version] - 30c Discharge built to fit perfectly in your Blade Inductrix, Tiny Whoop.This LiPo Battery gives an increase in performance, provide you more punch and longer flight times and only weight 6.6g per unit
[Durable] - Equipped with High current ultra micro, it's sturdy and can deliver the right voltage consistently without breaking over time
[Wide application] - This LiPo Battery is great for brushed whoop motors of any size and brushless 1s and 2s whoops as well. Like snapper 7, betafpv6s, mobula 7, Beta65s, beta65x
[Note] - Don't over-charge, or over-discharge batteries. Do not use inferior chargers. Don't put it beside the high temperature condition. Don't use high current charging frequently.If the battery cannot be used, please contact us immediately! !

Rank No. #4

4pcs 520mAh 1S LiPo Battery 80C 3.8V HV LiHv Battery JST-PH 2.0 PowerWhoop mCPX Connector Upgraded for Inductrix FPV Plus EMAX Tinyhawk Micro FPV Racing Drone xt60 for Drone

Upgrade 520mAh 1S battery with the connector of JST-PH 2.0 AKA Powerwhoop mCPX is customed for larger brushed whoop drones like EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus, Eachine trashcan, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7
This FPV 1S battery's discharge rate is 80C, Small size of 64 * 15 * 6 mm, Light weight of 13.42g/pc, you can get a long flight time and more power while staying at a suitable weight
The weight of the 520mAh 1S Lipo battery is 13.42g heavier than the 450mAh battery, better performance than it
Newly developed chemistry 520mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation
Note: Don't over-charge, or over-discharge batteries. Do not use inferior chargers. Don't put it beside the high temperature condition. Don't use high current charging frequently. If you have any questions after receiving the package, please contact us as soon as possible

Rank No. #5

Gaoneng 8pcs GNB LiPo Battery 1S 380mAh 3.8V HV LiHV 60c 120c Inductrix FPV BNF Blade RC Horizon eflite JST-PH2.0 Connector

【Specification】- Material: Lithium polymer; Capacity: 380mAh; Voltage: 4.35V；Configuration：1S1P; Max cont. Discharge(C-rate/current): 60C, Max Burst(C-rate/current): 120C, Dimensions: 62x11x7mm Appr.(LxWxH); Approx weight: 8g(+/-0.5g).
【Advantage】This model is 300mAh model upgraded one, it’s about 0.5g heavier, and capacity is larger, also c-rating is higher than previous model. Because of this, 380mAh could provide you a longer flight time, but brush in shorter time. So you would have a new experience in flight with your FPV.
【Application】- GAONENG 1S 380mAh HV LiPo Battery 60C/120C 3.8V with is good for Inductrix FPV BNF BLADE GAONENG RC Horizon eflite JST-PH2.0 connector.
【Voltage Note】- Be sure charging and use in safety. Do not leave when charging. In order to keep battery useful for long cycle life, do not overcharge more than 4.35V and do not over discharge below 3.4V.
【What You Get】- 8 pieces GAONENG GNB 1S 380mAh 3.8V HV Lipo battery. If you have any doubt, please don’t be hesitated to contact us, we will reply you within 24 hours.

Rank No. #6

6pcs GNB LiPo Battery 1S 300mAh 3.8V HV LiHV 60c 120c Inductrix FPV BNF Blade RC Plastic Head PH2.0 Connector

【Specification】- Material: Lithium Polymer; Capacity: 300mAh; Voltage: 3.8V; Configuration: 1S1P; Max cont. Discharge: 60C , Max Burst(C-rate/current): 120C.
【Dimensions】- 51mm x 11.5mm x 6.5mm Appr. (L x W x H); Approx weight: 7.0(+/-0.3g)
【Application】- GAONENG GNB 1S 300mAh LiPo Battery 60C 120C 3.8V with PH2.0 Connector is suitable for 65mm FPV Drone, BetaFPV Meteor65 Pro ELRS, Cetus FPV, iFlight Alpha A65, Happymodel Mobula6 HD, Emax NanoHawk, Crazypony Moblite6, NewBeeDrone AcroBee65, URUAV UR65, Mini Indoor Whoops, E-flite Blade BNF Inductrix, Tiny Whoop, RC Toy, Brushed Racing FPV, Brushless Quads, Quadcopter etc.
【Voltage Note】- Be sure charging and use in safety. Do not leave when charging. In order to keep battery for long cycle life, do not overcharge more than 4.3V and do not over discharge below 3.4V.
【What You Get】- GNB GAONENG 1S 300mAh 3.8V Lipo battery 6 pieces, stickers 1 piece and instruction 1 piece. If you have any doubt, please don’t be hesitated to contact us, we will reply you within 24 hours.

Rank No. #7

Gaoneng 6pcs 380mAh HV 1S Lipo Battery FPV Battery 60C/120C 3.8V with PH 2.0 Powerwhoop Connector for UZ65 US65 Tiny Whoop Drone Blade Inductrix

High capacity of 380mah 60C, Small size of 62 * 11 * 7mm, is the great choice of Tiny Whoop Blade inductrix
The battery connector is PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
This 380mah HV 1S Lipo Battery gives an increase in performance, provide you more punch and longer flight times and only weight 8g per unit
GAONENG 380mah Battery is Great for brushed whoop motors of any size and brushless 1s and 2s whoops as well. Like snapper 7, betafpv6s, mobula 7, Beta65s, beta65x
Caution: As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water

Rank No. #8

Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug

[Insane Speed] - These 19000kv / 70000 rpm coreless motors provide more extra power to fly with FPV camera.
[Champion's Choice] - These coreless tiny whoop motors are equiped With 1.25mm JST Plug, perfect for Inductrix FC.
[Tiny and Portable] - These coreless tiny whoop motors' Shaft Diameter: 0.8mm, Motor Diameter: 6mm, Motor Length: 15mm, Cable Length: 56mm.
[Lightweight] - These blade inductrix motors' weight is about 1.8g, 4 pcs (2 CW and 2 CCW).
[Widely used] - These 6x15 motors work for Blade Inductrix, Tiny Whoop, Nano QX etc.

Rank No. #9

Crazepony 4pcs 615 Coreless Motor 17500KV Special Sauce Edition for SNAPTAIN SP350 Blade Inductrix Tiny Whoop

[Tiny and Portable] - These coreless tiny whoop motors' Shaft Diameter: 0.8mm, Motor Diameter: 6mm, Motor Length: 15mm, With 1.25mm JST Plug.
[More Powerful] - These 17500kv @3.7V / 65,000 rpm coreless motors provide extra power to fly with FPV camera.
[Special Sauce Edition] - These coreless motors can deliver high efficiency and constant power for a stable flight.
[Lightweight] - These blade inductrix motors' weight is about 1.8g, 4 pcs (2 CW and 2 CCW).
[Widely used] - These 6x15 motors work for Blade Inductrix, Tiny Whoop, Nano QX etc. If the product you received has any quality problems, please contact us at the first time, we will give you a satisfactory solution

SaleRank No. #10

10pcs Upgraded Tiny Whoop JST-PH 2.0 Male and Female Connector Cable for Battery JJRC H36 H67 Blade Inductrix E010 E013

★This is the male and female connector cable,
★Upgrade JST-PH 2.0 connector, the pins will not loose easily
★Must have for HV batteries and high performance
★80mm length/per unit. 22AWG soft silicone wire
★Suitable for tiny whoop like JRC H36 H67 Upgrading Blade Inductrix, E010 E013, and KingKong Tiny drone

Rank No. #11

GNB 4pcs 520mAh 1S LiPo Battery 80C HV 3.8v LiHV Battery JST-PH2.0 Connector Upgraded for Inductrix FPV Racing Drone Like EMAX Tinyhawk 2 etc

【Upgrade Version】Upgrade 520mAh 1S battery with the connector of JST-PH 2.0 AKA Powerwhoop mCPX is customed for larger brushed whoop drones like EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7
【Small Size】Small size of 64 * 15 * 6 mm,The weight of the 520mAh 1S Lipo battery is 13.42g heavier than the 450mAh battery, better performance than it
【Better Performance】This 1S lipo tiny whoop battery is a great choice for anyone flying a Tiny Whoop that uses for brushed whoop motors of any size and brushless 1s whoops
【Longer Flying Time】Newly developed chemistry 520mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation
【Caution】As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water

SaleRank No. #12

Blade BLH9605 Prop Set (8): Inductrix Hobby Rc Vehicle Accessories

Prop Set (8): Inductrix Plus FPV
Part Number: BLH9605
Brand: Blade

Rank No. #13

GAONENG 2PCS GNB LiPo Battery 3S 380mAh 11.4V HV LiHV 90c 180c Horizon eflite Cabled PH2.0 for Beta75X Alpha A75 Inductrix FPV BNF Blade RC

【Specification】- Material: Lithium Polymer; Capacity: 380mAh; Voltage: 11.4V；Configuration：3S1P; Max cont. Discharge: 90C, Max Burst(C-rate/current):180C.
【Dimensions】- 55mm x 17mm x 20mm Appr.(L*W*H); Approx weight: 32g(+/-1g)
【Application】- GAONENG GNB 3S 380mAh HV LiPo Battery 60C 120C 11.4V with XT30 Connector is a great choice for size 90-130mm Brushless Drones, 1.6 to 2 inch Propeller Drone, Beta75X, Alpha A75, HGL Petrel 120x, CineBee, 2.5 inch Toothpick Drone, Cine Whoop, Cinelog, Cinewhoop, RC Toy, Small Heli, Airplane, Quads, Quadcopter, Helicopter, Multiroter, Mini Micro FPV, Freestyle Drone, RC Car, RC Boat, Aerial Model, DIY FPV etc.
【Voltage Note】- Be sure charging and use in safety. Do not leave when charging. In order to keep battery for long cycle life, do not overcharge more than 13.05V and do not over discharge below 10.2V.
【What You Get】- 2 pieces GNB 3S 380mAh 11.4V HV LiPo battery. If you have any doubt, please don’t be hesitate to contact us, we will reply you within 24 hours.

Rank No. #14

AOK-041 1S LiPo Battery Voltage Checker Tester for Tiny Whoop Blade Inductrix Quadcopter with Micro JST 1.25 JST-PH 2.0 Micro Losi and JST Connector

【Small and Portable】Support four standard micro UAV battery interface, plug and check, dimensions: 43x23x15mm, weight: 10g
【Precision Display】0.36 inches red digital tube display, display battery voltage, battery voltage detection accuracy is accurate to 10mV
【Multi-port Support】Supporting ports JST(2.54mm), MOLEX(2.0mm), mCPX(2.0mm), MCX(1.25mm)
【Widely Applicable】Support lithium battery LiFe(3.3/3.65V), LiPo (3.7/4.20V),Li-Hv(3.8/4.35V)
【Circuit Protection】Four battery interfaces support battery polarity reverse connection protection, four battery interfaces are supported LiFe,LiPo,LiHv

Rank No. #15

Blade BLH9602 Motor Set (4): Inductrix Hobby Rc Vehicle Accessories

Motor Set (4): Inductrix Plus FPV
Part Number: BLH9602
Brand: Blade

Rank No. #16

1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

ONLY support LiPo 3.7V/4.20V 1S battery
Support 0.2A/0.6A charge current by switch button （ Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2）
USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.

Rank No. #17

GAONENG 6pcs 380mAh 60C 1S LiPo Battery 3.8V/4.35V LiHv Battery with JST-PH 2.0 Connector for UZ65 Tiny Whoop Micro FPV Racing Drone

The ultra 380mAh 1S LiPo Battery for Tiny Whoop Blade Inductrix（Need PH2.0 Upgrade）Quadcopter.
Battery Size:62*11*7.0mm, Weight: 8g/per unit, Connector: PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
The weight of the 380mAh 1S Lipo battery is 0.7g heavier than the 300mAh battery, better performance than it.
Newly developed chemistry 380mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation.
Note: Don't over-charge, or over-discharge batteries. Do not use inferior chargers. Don't put it beside the high temperature condition. Don't use high current charging frequently.

Rank No. #18

Blade Main Frame: Inductrix FPV HD, BLH9908

Rank No. #19

Blade BLH9603 Main Frame: Inductrix Hobby Rc Vehicle Accessories

Main Frame: Inductrix Plus FPV
Part Number: BLH9603
Brand: Blade

Rank No. #20

6 Packs CODDAR 650mAh 1S 3.8V 100C HV LiPo Battery with JST-PH 2.0 Cable Connector for EMAX Tinyhawk 2 EZ-Pilot E010 M80S Tiny7 Inductrix FPV Plus US65 Beginner Micro Racing Drone Quad, CD1S650100HVC

Specifications:CODDAR 650mAh 1S 3.8V 100C LiPo with JST-PH 2.0 and XH-JST balance Connector, Dimension 60(L)*18(W)*8(H)mm, Approximately Weight 15grams
Performance: Compared to the non-HV equivilant, this battery is much lighter and more efficent. Testing shows a 10% to 16% boost in performance, with minimal voltage sag
Quality Control: CODDAR each battery well control the test before ship to Amazon warehouse to ensure you will get the best quality products
Suitable Devices: 1.6 inch to 2 inch FPV Drone Quadcopter or other RC devices, you could contact us if unsure
Servics: Your satisfactions is KEY important to us! You will be welcomed to contact us anytime if you have any questions, we will reply you within 24 hours

Last update on 2023-08-06 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Blade Inductrix Fpv Battery Upgrade?

Do you get stressed out thinking about shopping for a great Blade Inductrix Fpv Battery Upgrade? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Blade Inductrix Fpv Battery Upgrade, which is why we have assembled a comprehensive list of the greatest Blade Inductrix Fpv Battery Upgrade available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Blade Inductrix Fpv Battery Upgrade that you consider buying. Your questions might include the following:

Is it worth buying an Blade Inductrix Fpv Battery Upgrade?
What benefits are there with buying an Blade Inductrix Fpv Battery Upgrade?
What factors deserve consideration when shopping for an effective Blade Inductrix Fpv Battery Upgrade?
Why is it crucial to invest in any Blade Inductrix Fpv Battery Upgrade, much less the best one?
Which Blade Inductrix Fpv Battery Upgrade are good in the current market?
Where can you find information like this about Blade Inductrix Fpv Battery Upgrade?

We’re convinced that you likely have far more questions than just these regarding Blade Inductrix Fpv Battery Upgrade, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Blade Inductrix Fpv Battery Upgrade, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Blade Inductrix Fpv Battery Upgrade. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Blade Inductrix Fpv Battery Upgrade buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Blade Inductrix Fpv Battery Upgrade currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Blade Inductrix Fpv Battery Upgrade has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Blade Inductrix Fpv Battery Upgrade?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Blade Inductrix Fpv Battery Upgrade.
Customer Ratings: Number ratings grade Blade Inductrix Fpv Battery Upgrade objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Blade Inductrix Fpv Battery Upgrade.
Product Quality: You don’t always get what you pay for with an Blade Inductrix Fpv Battery Upgrade, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Blade Inductrix Fpv Battery Upgrade is should be an indication of how long it will work out for you.

We always remember that maintaining Blade Inductrix Fpv Battery Upgrade information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Blade Inductrix Fpv Battery Upgrade is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Blade Inductrix Fpv Battery Upgrade of 2023 – Reviewed and Top Rated

How Do You Buy The Best Blade Inductrix Fpv Battery Upgrade?

Related Post: