The Best 125Khz Reader of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best 125Khz Reader of 2022. Check our ranking below.
2,855 (random num) Reviews Scanned
Rank No. #1
RFID Reader 125KHz - Reads Proximity Cards & EM4100 ID Card - USB Reader Emulates Keyboard for Linux, Android, Win, iOS
- RFID Reader read both 125KHz 1326 family ISO Prox whole family cards & EM ID EM4100 cards together, HID USB device no driver request.
- 125KHz RFID reader supports EM4100 ID cards and also 1326 1346 1386 ISO Prox card, H10301 H10304 format etc.
- RFID Reader with 40 output formats for EM4100 ID card UID, max. 40 bits card number in 10H or 13 digital decimal format, configurable with config card by user.
- Proximity card reader sends 125KHz proximity card 1326 family card number in 40 type formats or in raw wiegand bit data format, from 24 bit to 80 bits data, easy for understanding 1326 family card type
- Advanced config process allow user to choice 20 clients format output and set prefix/suffix, ingore leading zero. This is read only. If you want to write card with ID/FC number, you may go ASIN：B0BCYRSLSF
SaleRank No. #2
UHPPOTE Proximity RFID Card Reader 125KHz Wiegand 26/34 bits for Access Control System
- The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.
- Support wiegand 26bits or wiegand 34bits output format.
- Ultra-low power consumption, the standby current is less than 50mA.
- It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer.
- Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
Rank No. #3
HiLetgo 125Khz EM4100 USB RFID ID Card Reader Swipe Card Reader Plug and Play with Cable First 10 Digit
- Unable to read IC CARD. Only can read 125kHz ID Card.
- Can read TK4100, EM4100 Card/Tag
- Size: 110mm x 80mm x 26mm
- Output format: First 10 digit
- Built in operating buzzer
Rank No. #4
LEXI Upgraded 10 Frequency RFID Writer/Reader/Duplicator, 125KHz 13.56MHz ID IC HID UID Decoder, Card Copier, NFC Reader, Key fob Cards Programmer, with USB Interface and Software
- 【IMPORTANT REMINDER】The applicability of our reader is limited, it cannot match all types of FRID cards. Please read our product description carefully. If your card is not the type listed by us, or if you don’t know the type of your card, please do not buy it, or you can consult me. Thanks!
- 【MATCH VARIOUS TYPES OF CARDS】Compatible with ID/IC card, EM card, Mi-fare classic, UID card, T5577/EM4305 card, HID 1386/1326/1346, Ntag 213/215/216, etc. Not support CID card.
- 【CRACK ENCRYPTED CARD】Our reader can crack most of 13.56MHz encryption cards. (Please ensure that this operation must connect the reader to the computer).
- 【SUPPORT READ AND WRITE 10 FREQUENCIES】Support 125KHz, 250KHz, 375KHz, 500KHz, 625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz (ISO1443A/B), support HID Proxy cards, etc.
- 【MARVELOUS DESIGN, JUST FOR YOU】HD 2.8 inch full color screen, clear display and voice broadcast. It can be used by installing battery or connecting the device or charger with the USB cable.
Rank No. #5
2023 Newest RGTTOTG CDS Smart Card Reader Writable Key ID IC Card Replicator NFC Reader 125KHz Frequency Identification Card Writer for R4 R5 Smart Ring Reading Writing
- A. Working Frequency: The working frequency of this card copier reader is 125KHz/13.56MHz, support IC ID dual frequency replication, support NFC label
- B. Widely compatible with the Windows operating system, plug the CD2 device into a USB port, click on the device to download the required software for installation, and once the installation is completed, it can be used. CD2 has the characteristics of simple and convenient operation, fast reading and writing speed, strong reading and writing ability, and high success rate in reading and writing
- C. CDS=CD2+ID2, is an upgraded device of the CD2 read-write card replicator. It can be used not only for R5 smart rings, but also for R4 smart rings, and can read and copy 98% of IC ID NFC RFID cards. Some fully encrypted cards may not be able to read or write, please pay attention to the prompts for this feature when purchasing
- D. Common Frequency Identification Card Read and Write: Put the card on the card reader, and then according to the software read EMID to scan the card. The software will scan and display the card number. Place a writable 125KHz chip on the card reader and press Write EMID on the software.
- E. Read and Write IC Semi and Full Encrypted Card: Place the card on the reader and press Read on the software to begin decrypting. √ means successful decryption and X means failed decryption. After successful decryption, the software will display the card number. Place a writable chip with a writable 13.56MHz on the reader, then press Write Type a on the software.
Rank No. #6
RFID Card Reader 125KHz/13.56Mhz Reader Support ISO14443-A/B Protocol, IC ID Card Protocol Contactless Card IC ID Reader USB Port Compatible with Windows XP/7/8/10/11
- USB Inteface,Card reader only, Plug in and Play,Open the software or document that needs to be read,Read the card number.simulate keyboard input, works in Linux Andriod Windows Mac IOS. Setting Software download link: https://drive.google.com/file/d/1rVRwwbhugu_rhf2BBMGD-EnYba88Sjb2/view?usp=drivesdk
- RFID Reader Scanner read both 125KHz/13.56Mhz 1326 family ISO Prox whole family cards & EM ID EM4100 cards together, MF S50 S70 bank card and other 14443A protocol labels that support ISO14443-A/B protocol, ID IC card and other 14443B protocol labelsHID,Working frequency band 125KHz/13.56Mhz.
- Proximity card reader sends 125KHz/13.56Mhz Dual-frequency proximity card 1326 family card number in 40 type formats or in raw wiegand bit data format, from 24 bit to 80 bits data, easy for understanding 1326 family card type.
- Working status: Red indicates standby mode, and green indicates successful card swiping,Built in operating buzzer.
- 125KHz/13.56Mhz Dual-frequency RFID reader supports EM4100 ID cards and also 1326 1346 1386 ISO Prox card, H10301 H10304 format etc.
Rank No. #7
Slim Mini Size Waterproof Wiegand 26/34 125KHz EM RFID Reader for Door Access Control Proximity RFID Reader Black Color
- Card Type: EM-ID Card (Can't support HID, Cobra, APCiK etc)
- Type: EM RFID 125khz reader, Can't work alone, Normally work with Control board/Fingerprint devcie/Master controller to build completely Security Access Control System.
- Support Wiegand 26-Bit and Wiegand 34-Bit; Built-in LED (Double Color LED) and Loud Speaker (Buzzer).
- WatherProof, Water Proof, can Install outside,Small and Beautiful Reader.
- Intput Voltage: DC 9-15V, Can stable running for many years.
Rank No. #8
English 10 Frequency RFID NFC Card Copier Reader Writer for IC ID Cards and All 10pcs 125kHz Cards+10pcs ID 125kh Key Fobs+10pcs 13.56mhz UID Key +1USB
- SUPPORT 10 FREQUENCY: ID-125KHz, ID-250KHz, ID-375KHz, ID-500KHz, ID-625KHz, ID-750KHz, ID-875KHz, ID-1000KHZ, IC13.56MHz (ISO1443A/B), HID125kHz Prox cards. NOTE: The software of our machine is ONLY compatible with WINDOWS system, NOT working with MAC system or Linux system; It doesn't work for fully-encrypted cards. By its decoding software, it may work for most half-encrypted cards, BUT NOT ALL. Support read: EM4100/EM4200, Mifare classic, UID cards, Ultralight, Ntag203, 1386/1326/1346; Support cards write: 1386/1326/1346, T5577, EM4305, Mifare UID cards.
- HOW TO COPY AN UNENCRYPTED CARD: 1.Inserted batteries and powered on 2.Press“OK” when a disclaimer pops up 3.Inserted card into back elastic 4.Press SCAN or READ 5.Replace a Blank with same frequency of the card you want to copy 6.Press WTIRE
- HOW TO DECODE A ENCRYPTION CARD: when connect with PC:there is a DISCLAIMER At this time, do not press the "OK" button or any button on the Reader machine. Enter my computer, Find the removable disk and copy software exe that with RED Logo to another flash drive of your PC. Double-click to open the software, it shows USB connecting, and clik the Start on your screen. it will take about 1-3 minutes. When it shows Deconding is succcessful, replace a blank card, then press WRITE to copy it.
- TIPS:The software for rfid reader is Automatic update ,if no find the update software is NO NEED to update.when the computer recognized as malicious software,it should be exit computer's antivirus software,if not ,the rfid reader's software will be deleted.
- This Deive can not program sensors.
Rank No. #9
RFID Reader USB Reader 125KHz for EM4100 & 1326 Family Proximity Cards As USB Keyboard Input for Raspberry pi Linux Android Win Mac iOS + 3Pcs Card
- -RFID Reader USB reads 125Khz Proximity Card 1326 1346 1386 ISO Prox whole family card/ fob, H10301 H10304 format etc.
- -USB Reader 125KHz reader for reading EM4100 ID cards also, HID USB device no driver is requested.
- -RFID Reader with 40 configurable output formats: 5 digit ID number /3 FC + 5 ID / 4 byte HEX etc. /Max. 40 bits UID in 10H or 13 digital.
- -Proximity card reader sends 1346 family 125KHz proximity card data in raw wiegand bit data format, from 24 bit to 80 bits data, easy for understanding 1346 family card type.
- -USB Card reader function configurable: Ena/Disable buzzer; choice QW/AZERTY keyboard layout,works in Raspberry pi Linux Android Windows MacOS.
Rank No. #10
No Relay Mini Waterproof,Wiegand 26/34 Output,Dual Frequency 125KHz EM+13.56Mhz MF Card Reader,Door Access Control,Proximity Reader,Access Control Keypad for Access Control Board,Free Keyfob 10pcs
- ✔️This Wiegand 26/34 RFID Card Reader is just reading function only,Can't work alone as access controler ,No Relay/No User Capacity, need to work with access control panel or door access controller
- ✔️Card Type: EM-ID Card +MF-IC card Mifare card both(Can't support HID, Cobra, APCiK etc) ,Reading Distance 2-5cm,
- ✔️Type: EM RFID 125khz reader, Can't work alone as Controler, Normally work with Control board/Fingerprint devcie/Master controller to build completely Security Access Control System.
- ✔️Support Wiegand 26-Bit and Wiegand 34-Bit Output; Built-in LED (Double Color LED) and Loud Speaker (Buzzer). Operating Voltage DC 12V
- ✔️IP68 WaterProof, can Install outside,Small Size and Beautiful Reader.
Last update on 2024-06-28 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best 125Khz Reader?
Do you get stressed out thinking about shopping for a great 125Khz Reader? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 125Khz Reader, which is why we have assembled a comprehensive list of the greatest 125Khz Reader available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 125Khz Reader that you consider buying. Your questions might include the following:
- Is it worth buying an 125Khz Reader?
- What benefits are there with buying an 125Khz Reader?
- What factors deserve consideration when shopping for an effective 125Khz Reader?
- Why is it crucial to invest in any 125Khz Reader, much less the best one?
- Which 125Khz Reader are good in the current market?
- Where can you find information like this about 125Khz Reader?
We’re convinced that you likely have far more questions than just these regarding 125Khz Reader, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 125Khz Reader, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 125Khz Reader. Make sure that you are only using trustworthy and credible websites and sources.
We provide an 125Khz Reader buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 125Khz Reader currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 125Khz Reader has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 125Khz Reader?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 125Khz Reader.
- Customer Ratings: Number ratings grade 125Khz Reader objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 125Khz Reader.
- Product Quality: You don’t always get what you pay for with an 125Khz Reader, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 125Khz Reader is should be an indication of how long it will work out for you.
We always remember that maintaining 125Khz Reader information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 125Khz Reader is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.