The Best 4 Axis Cnc Controller Kit of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best 4 Axis Cnc Controller Kit of 2022. Check our ranking below.
2,603 Reviews Scanned
Rank No. #1
RATTMMOTOR CNC Controller Kit, 4 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Breakout Board, 24V Power Supply for CNC Machine
- 【Motor and TB6600 Driver wiring】Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- 【Control Card and TB6600 Driver wiring (X-axis as an example) 】Driver's "Pul+" connects to control card's XP+ pin , Driver's "DIR+" connects to control card's XD+ pin , Driver's " PUL- " pin and " DIR- " connection to USB Mach3 control card's " 5V "".
- 【Low Noise/High Torque Hybrid Stepper Motor】23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8°, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- 【Support Forward and Reverse Control Stepper Motor Driver】42/57 TB6600 stepper motor driver with input voltage anti-reverse connection and overheat/overcurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) current control.
- 【USB Interface, Drive-free Design 4-Axis Linkage Control Card】Output pulse frequency of 100KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
SaleRank No. #2
CNCTOPBAOS 4 Axis Nema23 Stepper Motor Kit,425oz-in 112mm 3A Dual Shaft,Motor Driver CNC Controller Kit,Mach3 Control Board,36V Power Supply for CNC Router Milling Engraving Machine
- ♞【Stepper Motor】4pcs 23HS2430B nema23 stepper motor ; Holding Torque: 425oz-in/ 280Ncm ; Step Angle(degrees):1.8 ; Phase:2 ; Shaft: 8mm Dual Shaft ; Type:Hybrid ; Lead: 4-lead ; Size:57x57x112mm.
- ♞【Stepper Motor Driver】4pcs CW5045 driver, current: 1.3A-4.5A ; Driver microstep: 1 (1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/25, 1/50, 1/125, 1/250 ; Input voltage: 24-50V DC
- ♞【Control Board】1pcs 5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the computer at the same time.Working voltage is 5V DC and support with MACH3,EMC2,KCAM4 software
- ♞【Power supply】1pcs 400W,36V/9.7A switching power supply; Output Voltage:36V ; Input: 110-120V AC or 220-240V AC
- ♞【Application】This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.
SaleRank No. #3
RATTMMOTOR 4-Axis Mach3 CNC Controller Kit, LAN5160T4 Stepper Motor Driver Ethernet with Electronic Handwheel MPG Pendant Emergency Stop Manual Pulse Generator for CNC Router/Lathe/Engraving Machine
- 【LAN5160T4 Controller Introduction】The LAN5160T4 control board is a newly researched and developed all-in-one 4-axis drive control board with a control cycle of 2 ms per position and high control accuracy. The maximum single axis output pulse is 300KHz, the maximum subdivision is 256, the maximum current is 6A and the common stepper motors are supported.
- 【LAN5160T4 CNC control system】LAN5160T4 CNC control system adopts ARM design architecture, ARM complete including communication, code parsing, underlying algorithm and control pulse generation part. The design is reasonable, the control is reliable and the operation is easy.
- 【LAN5160T4 function】Support mach3 control, and computer communication using Ethernet communication method. Equipped with hand pulse interface, supports serial electronic handwheel.
- 【Equipped with a 6-axis digital handwheel】With X1/X2/X100 triple gear ratio, optional emergency stop switch for control switch. the all-plastic housing has high insulation strength, which can realize 4 axis (or 6 axis) selection switching. Metal gear, accutate scale, high precision and good texture.
- 【LAN5160T4 performance parameters ①】maximum output 300KHz per channel; 7 common digital input interfaces; 3 common digital output interfaces; 1 PWM spindle speed output; support 4 channels stepper motor control, single channel maximum 300KHz control pulse output; ARM main control chip.
Rank No. #4
CNCTOPBAOS 4 Axis CNC Kit,Nema23 Stepper Motor CNC Controller Kit,USB Controller Card,with FMD2740C Driver,36V Power Supply,425oz-in 3A Stepper Motor 112mm Dual Shaft,USB CNC Breakut Board
- ♞【Nema23 Stepper Motor】Step Angle: 1.8°; Current: 3.0A; Holding torque: 425oz-in/ 280Ncm; Shaft: Dual Shaft,Shat diameter: 8mm; Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue
- ♞【FMD2740C Driver】Input Voltage: DC18-50V; Current: 1.4A-5.6A;Subdivision precision: 400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000 and 25000 optional
- ♞【4 Axis USB CNC Breakout Board】Card input voltage: 15-36VDC; With remote hand control; USB port,only support USBCNC Software,with a CD,you can download the manual,software and registration code.Support limit switch;0-10V speed control signal,external pause and reset interface etc
- ♞【400W 36V 11A DC switching power supply】Please flip the side input voltage selector switch to choose the input power supply,support input voltage : AC110V-120V or AC220V-240V;
- ♞【Support computer system 】Support Win XP/7/8/10 system,if you can not get the activation code on Win 10 or can not get the registration code from the CD,pls let us know,we will help you to solve it and send you the registration code.
Rank No. #5
CNCTOPBAOS 4 Axis Offline Stand Alone CNC Motion Controller System DDCSV3.1,Servo/Stepper Motor Control Replace Mach3 PLC+100PPR MPG Handwheel with E-Stop for CNC Router Engraving Machine
- ♞【Brief introduction】The DDCSV3.1 is a 4 axis motion controller,the highest output pulse per axis is 500KHz.This provides high control precision for stepper motors and servo motors.The DDCS operates as a stand alone system without the need of a computer, and it needs two 24V DC power supplies.
- ♞【Compatible with G code set】5 inches TFT Screen ; Resolution ratio: 480x272 ; the highest output pulse per axis is 500KHz. This provides high control precision for stepper motors and servo motors. All operations are controlled by only 17 keys and it supports the FANUC with high universality to be compatible with G code set,with 4G USB flash disk support for G code file input,no size limited of the G-code file.
- ♞【Brief technical feature】16 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs ; Analog spindle control 0-10V spindle control (can be modified as PWM output) ; ARM9 main control chip,FPGA core algorithm chip ; Jog function for each axis (continuous, step, defined distance) ; Customer can define the distance ; Support NPN type limited switch.
- ♞【MPG Handwheel】MPG Resolution:100 PPR ; Switch:X1,X10,X100,with Emergency stop,LED indicator, with 15-pin plug,so it's play and plug.
- ♞【Applications】The DDCV3.1 can be used for many styles and types of CNC machines. Lathes, CNC Routers,Pick&Place and Milling Machine,lathe machine and cutters are just a few examples.
Rank No. #6
CNCTOPBAOS 4 Axis Nema23 Stepper Motor CNC Kit 270oz-in 76mm 3A Dual Shaft,TB6560 MD430 Driver,Mach3 Control Card Breakout Board 24V DC CNC Controller Kit for CNC Router Engraving Machine
- ♞【Nema23 Stepper Motor】 23HS8430B Nema23 Stepper Motor / Holding Torque: 270 oz-in ; 180N.cm / Motor Size:57x57x76mm / Phase: 2 phase / Motor Lead : 4-Lead / 1.8° Step Angle / Type:Hybrid
- ♞【Stepper Motor Driver】TB6560/MD430 Stepper Motor Driver / Current: 3A / Support voltages : 12-34V DC / Step frequency up to 100khz / 2 phases bipolar driver / Full step, half step, eight step and sixteenth step
- ♞【5 Axis V5 Breakout Board】 Comes with DB25 parallel cable and USB cable ; Support Mach3,KCAM4,EMC2 and other software ; 5-way input interface, you can connect limit switch and stop switch,reset,knife signal;Data transfer speed can up to 10MBit/s
- ♞【Power supply】350W,24V/14.6A switching power supply; Output Voltage:24V ; Input: 110-120V AC or 220-240V AC
- ♞【Application】This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.
Rank No. #8
ARM 32-bit 4 Axis GRBL 1.1f Type-C Port CNC Engraving Machine Control Board,Optocoupler Isolation,CNC Router Engraver Milling Machine GRBL Control
- 4-Axis 3.0,GRBL 1.1f control board
- Supply Voltage：DC24V- 5A.Reserved 24V, 12V, 5V power output port, convenient to expand various functions
- Tri-axis software support:Candle/LaserGRBL/LightBurn/USG. Quad-axis software support:Window/Linux/Mac
- Support external driver, external driver reserved interface with the market high-power driver consistent, convenient wiring
- Use Type-C USB interface, more convenient to use and more stable data transmission
SaleRank No. #9
Tofelf 2pcs Stepper Motor Driver, Upgraded Version TB6600 Stepper Driver,4A 9-42V 32 Subdivision for Nema 17/23 Stepper Motor Single Axis Hybrid CNC Controller for CNC/42 57 86 Stepper Motor
- ✿Total 32 subdivisions in 6 modes to choose, can control 2-phase stepper motor forward and reverse, smooth operation and high power
- ✿9V-42V DC power supply, up to 4A in 8 output currents, H-bridge bipolar constant phase current drive, fast operation and easy to connect, suitable for long-term use
- ✿Applicable to various stepper motors of Nema 17, 23 and 24, which work well with Nema motors and can also be used in various machines, such as X-Y-Z table, labeling machine, laser cutting machine, engraving machine, picking device, etc.
- ✿Built-in overheat protection, under-voltage protection and over-current protection, with energy-saving semi-automatic current-lock function, single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency
- ✿Suitable for college students, engineers, technicians, factory individuals, DIY electronics enthusiasts, etc.
Rank No. #10
Genmitsu 4th Axis Rotary Module Kit for 4040-PRO, 4040 Reno, 3030-PROVer MAX CNC Machine with Planetary Geared Stepper Motor, 4 Jaw Chuck, 10:1 Speed Reducer, Clamped Range: Length 10-200mm
- Discover the Possibilities: The Genmitsu 4th Axis Rotary Module Kit is a drop in upgrade that enables your 4040-PRO, 4040 Reno, 3030-PROVer MAX CNC machine to carve from different angles and positions or with the right software full rotary carving. The 4th axis allows for the creation of complex parts with curved or angled features that are not achievable with a traditional 3-axis CNC machine. Additionally, the G-code for the 4th axis must be sent using an offline controller (ASIN: B0C582HQ6Z), which should be ordered together with the 4th axis to ensure proper functionality (For the 4040-PRO only, the 3030-PROVer Max comes with the offline controller already installed.)
- NEMA17 Planetary Geared Stepper Motor: Take advantage of the high torque provided by the NEMA17 motor, which allows the motion system to rotate workpieces with more force and precision than any other belt-driven rotary modules on the market.
- Versatile dimensions: Adapt to various project requirements with a center height of 50mm, total height of 86mm, and material lengths with tailstock from 10-100mm; without tailstock from 10-200mm for flexibility. Applicable Material diameter: 2-50mm.
- Precision Control: Utilize the 10:1 reduction ratio for precise control, offering a minimum angle of 0.1° and a maximum angular speed of 300° per second, ensuring high speed and unparalleled accuracy.
- Software & Controller: To use a 4th axis on your CNC machine, you will need CAD/CAM software that can generate toolpaths for rotary motion. While options like Fusion 360 and Vectric are recommended, it's important to note that most software capable of generating 4th axis toolpaths is not free.
Last update on 2024-04-25 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best 4 Axis Cnc Controller Kit?
Do you get stressed out thinking about shopping for a great 4 Axis Cnc Controller Kit? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 4 Axis Cnc Controller Kit, which is why we have assembled a comprehensive list of the greatest 4 Axis Cnc Controller Kit available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 4 Axis Cnc Controller Kit that you consider buying. Your questions might include the following:
- Is it worth buying an 4 Axis Cnc Controller Kit?
- What benefits are there with buying an 4 Axis Cnc Controller Kit?
- What factors deserve consideration when shopping for an effective 4 Axis Cnc Controller Kit?
- Why is it crucial to invest in any 4 Axis Cnc Controller Kit, much less the best one?
- Which 4 Axis Cnc Controller Kit are good in the current market?
- Where can you find information like this about 4 Axis Cnc Controller Kit?
We’re convinced that you likely have far more questions than just these regarding 4 Axis Cnc Controller Kit, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 4 Axis Cnc Controller Kit, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 4 Axis Cnc Controller Kit. Make sure that you are only using trustworthy and credible websites and sources.
We provide an 4 Axis Cnc Controller Kit buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 4 Axis Cnc Controller Kit currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 4 Axis Cnc Controller Kit has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 4 Axis Cnc Controller Kit?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 4 Axis Cnc Controller Kit.
- Customer Ratings: Number ratings grade 4 Axis Cnc Controller Kit objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 4 Axis Cnc Controller Kit.
- Product Quality: You don’t always get what you pay for with an 4 Axis Cnc Controller Kit, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 4 Axis Cnc Controller Kit is should be an indication of how long it will work out for you.
We always remember that maintaining 4 Axis Cnc Controller Kit information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 4 Axis Cnc Controller Kit is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.