The Best Sovol Sv01 3D Printer of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Sovol Sv01 3D Printer of 2022. Check our ranking below.
2,619 (random num) Reviews Scanned
SaleRank No. #1
Sovol SV06 Plus 3D Printer with 300℃ High Temp 250mm/s High Speed All Metal Hotend, Planetary Dual Gear Direct Drive Touch Screen Auto Leveling 32-bit Silent Board, Printing Size 11.8x11.8x13.4 inch
- 【Classic I3 Structure with Larger Volume】Different from most 3D printers run by wheels in the market, SV06 Plus has a classic I3 structure which avoids wear and tear of wheels and multiple replacements. 300x300x340mm printing size makes SV06 Plus unique among I3 structure 3d printers. Modular design allows you to assemble SV06 plus within 5 steps easily, more applicable for household use.
- 【250mm/s High Speed High Flow All Metal Hotend】All Metal Hotend with larger melt zone enables you to print faster. High Flow up to 20mm³/s to achieve 250mm/s printing speed that greatly reduces the probability of clogging (180mm/s recommended for better printing quality). Working with SV06 Plus Klipper screen (does not come with the printer, need to purchase additionally), SV06 Plus can reach a fast and upgraded printing speed of 350mm/s.
- 【300℃ High Temp Printing】All metal Hotend Setup makes it possible to print up to 300℃. No need to deal with PTFE replacement anymore, and even no need to flash the firmware, you can print with different materials better and more easily. ( Enclosure is still needed if you want to print over 260℃.)
- 【Planetary Dual Gear Direct Drive】Sovol self-developed All Metal Direct Drive Extruder with planetary dual gear set, provide SV06 plus with higher drive ratio and a lighter motor, helps to achieve more accurate extrusion. Add large external knob for easy feeding.
- 【Upgraded 4.3 inch Touch Screen】Day & Night Modes can be switched casually. The unique Sovol UI and sensitive response bring you better experience than knob display.
SaleRank No. #2
Sovol SV04 IDEX 3D Printer, Independent Dual Extruder 3D Printer with All Metal Direct Drive 32-bit Silent Motherboard Auto Leveling, Larger Build Volume 300 x 300 x 400mm
- [IDEX 3D Printer with 4 Different Printing Modes] - Sovol SV04 3D printer is equipped with independent dual direct drive metal extruders that allow you to print two different colors, two different materials and two models simultaneously in the same or opposite direction. Better able to produce high-quality prints with a variety of materials such as PLA, ABS, PETG, TPU, PC, PA, wood, ASA and PVA.
- [More Space for Creativity] - Please download the latest firmware for SV04 from the official website of sovol before starting. Sovol SV04 size: 300 x 300 x 400 mm. Larger volume than SV01/SV02. Modular design for quick assembly allows for faster start.
- [Auto Leveling & 32-bit TMC2209 Silent Board] - The automatic leveling sensor on the SV04 makes adjustments to ensure that the bed and nozzle are at an optimal distance throughout the printing process, which improves bed adhesion and print quality. If you have any bed leveling issues please refer to the User Guide and leveling guide video on this product page. Upgraded 32-bit TMC2209 silent board, up to 7 additional drivers, more functions, more stable, super quiet.
- [Flexible Spring Steel Plate & 500W Power Supply] - The flexible magnetic building plate ensures that your prints grips well to avoid deformation and failed prints. You can peel off the prints without tools, just bend the plate and remove your prints. Built-in 500W branded power supply ensures stable and sufficient performance, fast heat hot bed and nozzle. It protects SV04 from unexpected power surges.
- [Fully Upgraded 4.3 inch LCD Touchscreen] - The upgraded LCD touch screen from Sovol has an excellent day/night mode and one-button control. The SV04 touch screen can be set to automatically replace the filament without printing paused. All modes are clear and easy to use. Double filament detector reminds you to replace filament, no more worrying about long time printing.
SaleRank No. #3
Sovol SV06 3D Printer & Sovol 5" IPS Touch Screen with Klipper Firmware Pre-Installed, Assist SV06 Speed up to 250mm/s
- Pre-installed Klipper firmware makes SV06 print at 250mm/s, 5 times as before. Print quality can be kept while speeding up.
- 5 inch IPS capatitive touch screen with a resolution of 480x800 provides high definition and rich colors. The Klipper touchscreen has great function options like height map, input shaper and slicing prints preview. It is customizable to suit your other printing needs. Multiple languages are also supported on this touch screen.
- Clip Design makes installation easier.
- Only fits for Sovol SV06. We do not recommend you to install it for Sovol SV06 Plus. You can order the specific Klipper screen for Sovol SV06 Plus.
- Any questions about the product please feel free to contact with us.
Rank No. #4
Sovol SV01pro 2023 Flexible Steel Platform, One Side Textured PEI Surface, Another Side Build Surface Sticker Sheet, Coming with Magnetic Bottom Sheet for Sovol SV01 SV01 pro SV02 3D Printer
- The size of Sovol double sided platform is 255*300mm, it is applicable with Sovol SV01pro, SV01, SV02 3D printer. Different materials of double sides fit for printing different filaments, which brings you unique printing experience.
- Sovol double sided flexible platform is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side, a build surface sticker on the other side and a magnetic bottom sheet with adhesive on the back.
- Sovol double sided flexible platform is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with any one side on the top. The maximum temperature for printing bed is 120℃.
- Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the platform without using any glue or other tools to help the model to stick onto the surface. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
- Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print cannot be removed, gentle flexing of the plate will help to remove it.
SaleRank No. #5
Sovol SV06 Plus 3D Printer & Sovol 5" IPS Touch Screen with Klipper Firmware Pre-Installed, Assist SV06 Plus Speed up to 250mm/s
- Pre-installed Klipper firmware makes SV06 Plus print at 250mm/s, 2 times as before. Print quality can be kept while speeding up.
- 5 inch IPS capatitive touch screen with a resolution of 480x800 provides high definition and rich colors. The Klipper touchscreen has great function options like height map, input shaper and slicing prints preview. It is customizable to suit your other printing needs. Multiple languages are also supported on this touch screen.
- Clip Design makes installation easier.
- Only fits for Sovol SV06 Plus. We do not recommend you to install it for Sovol SV06. You can order the specific Klipper screen for Sovol SV06.
- Any questions about the product please feel free to contact with us.
Rank No. #6
ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 8.85x8.85x11in Large Printing Size
- OVERVIEW OF NEPTUNE 3 PRO: 225x225x280mm/8.85x8.85x11 inch printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation
- DUAL-GEAR DIRECT EXTRUDER: The new direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS
- NOZZLE KIT FOR BETTER PRINTING: The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging
- SMARTER PRINTING EXPERIENCE: Auto bed leveling adopts a high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform(Only applicable to metal printing platforms). The printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage
- MORE STABLE PRINTING: The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life
Rank No. #7
Aluminum Extruder Idler Arm Metal Lever Compatible with Sidewinder X1 All Metal Titan Aero Prusa i3 MK2, 4max pro Sovol SV01 3D Printer (Black)
- Compatible with original titan extruder, titan aero extruder, Prusa i3 MK2 3D Printer, Sidewinder X1 printer's extruder, 4max pro , Sovol SV01 3D Printer
- Material: Aluminum alloy, stable, good quality
- Package: 1piece idler arm assembled with bearing, spring
Rank No. #8
Sovol Upgraded 4pcs Aluminum Hand Twist Leveling Nut & 8pcs Heatbed Silicone Leveling Column Mounts for SV01/SV02/SV03/SV04, Ender 3/3 Pro/3 V2, Ender 5/5 Plus/5 Pro, CR-10, CR10S/10S Pro 3D Printer
- [Sovol Latest Exclusive Blue Hand Twist Level Nut] - Upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.
- [Durable & Lasting Aluminum] - Made of high quality aluminum, last much longer than your stock plastic nuts.
- [More Powerful & More Tightly] - Metal nut is more powerful and will twist more tightly than plastic nuts.
- [Easier for Leveling] - The torque of these nuts is large, making it easier and more accurate to level the hot bed.
- If you have any issue, please kindly let us know, we will reply as soon as possible within 24 hours. We will offer you professional customer support and strive our best to offer your solutions.
Rank No. #9
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY Printers Build Volulme 8.66x8.66x9.84 inch
- Resume Printing Function: no worry to the immediate power outage or electric circuit error, Ender 3 has the ability to resume printing even after a power outage or lapse occurs, you can continue to print
- Creality Ender 3 3d printer, it is the most basic 3d printer model, more students and beginners can learn the 3d printer by this model, it can help to excercise your hands-on skills. It comes with several assembled parts, you need about 2 hours to assemble
- Advanced Extruder Technology: Ender 3 upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable
- Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 100 degree. Note: This Ender 3 3d printer just can print via sd card, or connect with the computer, it can’t print via connecting with your phone
- Strict Test: Strict testing for key components before delivery and supports available. Kindly remind, to make sure the printer can power on normally without power off automatically, please check the side of the power supply and see whether the power supply voltage is 115V? You can have a look at the side of the power supply to confirm this point
Rank No. #10
Sovol 5" IPS Touch Screen with Klipper Firmware Pre-Installed for Sovol SV06 Plus 3D Printer, Assist SV06 Plus Speed up to 350mm/s
- Pre-installed Klipper firmware makes SV06 Plus print at 350mm/s, 2 times as before. Print quality can be kept while speeding up.
- 5 inch IPS capatitive touch screen with a resolution of 480x800 provides high definition and rich colors. The Klipper touchscreen has great function options like height map, input shaper and slicing prints preview. It is customizable to suit your other printing needs. Multiple languages are also supported on this touch screen.
- Clip Design makes installation easier.
- Only fits for Sovol SV06 Plus. We do not recommend you to install it for Sovol SV06. You can order the specific Klipper screen for Sovol SV06.
- Any questions about the product please let us know at any time.
Last update on 2024-08-05 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Sovol Sv01 3D Printer?
Do you get stressed out thinking about shopping for a great Sovol Sv01 3D Printer? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Sovol Sv01 3D Printer, which is why we have assembled a comprehensive list of the greatest Sovol Sv01 3D Printer available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Sovol Sv01 3D Printer that you consider buying. Your questions might include the following:
- Is it worth buying an Sovol Sv01 3D Printer?
- What benefits are there with buying an Sovol Sv01 3D Printer?
- What factors deserve consideration when shopping for an effective Sovol Sv01 3D Printer?
- Why is it crucial to invest in any Sovol Sv01 3D Printer, much less the best one?
- Which Sovol Sv01 3D Printer are good in the current market?
- Where can you find information like this about Sovol Sv01 3D Printer?
We’re convinced that you likely have far more questions than just these regarding Sovol Sv01 3D Printer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Sovol Sv01 3D Printer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Sovol Sv01 3D Printer. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Sovol Sv01 3D Printer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Sovol Sv01 3D Printer currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Sovol Sv01 3D Printer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Sovol Sv01 3D Printer?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Sovol Sv01 3D Printer.
- Customer Ratings: Number ratings grade Sovol Sv01 3D Printer objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Sovol Sv01 3D Printer.
- Product Quality: You don’t always get what you pay for with an Sovol Sv01 3D Printer, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Sovol Sv01 3D Printer is should be an indication of how long it will work out for you.
We always remember that maintaining Sovol Sv01 3D Printer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Sovol Sv01 3D Printer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.