Skip to content

The Best Alps Joystick of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Alps Joystick of 2022. Check our ranking below.

2,640 Reviews Scanned

SaleRank No. #1
4PCs Replacement Analog Joystick for Xbox One Controller – ElecGear Repair Parts 3D Thumb stick Wireless Controller Rocker with T6 T8 Screwdriver Tool Kit for Xbox One, One S, One X and Elite
  • [EL4 for Xbox Controller] – 4x replacement analog joystick widely compatible with Xbox wireless controllers: Xbox One, One S and X and Elite Series 1. It is also used in newest Xbox Series S|X controllers. The thumbstick module was made by ALPS. This RKJXV stick controller series comes with 10K ohm trimmer potentiometers
  • [Compatibility] – This version of analog stick comes in light gray bottom plate. It locks in certain direction when not sit in controller cover. It comes with the same 14 prongs structure as PS4 versions. However, they’re slightly different from each other. Please use this EL4 for Xbox. Be noticed: EL4 does not work with older Xbox 360
  • [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting
  • [When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan
  • [Reminder of DIY] – With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. We suggest replacing the potentiometers first to solve most of the joystick problems. To desolder the entire joystick module off PCB by a normal soldering iron, please take a look at the desoldering kit at product ID: B0BK7169M8
Rank No. #2
Ikpek 4pcs Joysticks Replacement for DualSense PS5 Controller, 3D Analog Sensor Wheel Thumb Sticks Joystick Rocker Module Replacement for Playstation 5 Controller
  • 【Compatibility】Replacement analog joystick compatible with PS5 Controller Only (NOT FIT for PS4 Xbox One Xbox One S/X Controller).
  • 【4 × 3D Left/Right Analog Joysticks】Perfect replacement analog joysticks work for PS5 controller, repair your worn-out, damaged and drift analog joystick.
  • 【Analog Joysticks】Design for PS5 controller -- Solve Most Joystick Problem: Stick drift, stuttering, dead zones, creeping, blind spots, non centered.
  • 【Package Included】4 x 3D Analog Joystick.
  • 【Customer Service & Warranty】We provide 3 months warranty for replacement joystick. If you have any problem about the product, please feel free to contact us, we will reply you with 24 hours.
Rank No. #3
ElecGear 8X ALPS 2.1K Replacement Potentiometer + 4X Drift Fix PCB for PS5 DualSense, PS4 DualShock 4 Wireless Controller, Trim Pot Resistor Thumbstick Module Sensor for ALPS Analog Joystick
  • [ALPS 2.1KΩ Potentiometer] – The OEM trim pot resistor was made by ALPS. It fits ALPS analog joysticks. This trimmer potentiometer works with PS5 DualSense and some PlayStation 4 DualShock 4 wireless controllers with 2.1K ohm ALPS thumbstick module inside
  • [Compatibility] – ALPS sensors come in two different resistance values. Make sure the value is around 2.1K before ordering. Never judge its value by its color. (Be noticed: Choose 10KΩ version for most PS3, PS4, Xbox One, Elite Series 1 and 2, Xbox Series S|X and Switch Pro controllers. ALPS version is not interchangeable with the orange version made by FU.)
  • [4x Additional Drift Fix PCB] – Several factors cause joystick drifting a common issue. Even new joysticks can drift. The potentiometer was born without precision. Wear to the carbon film, spring fatigue and material stretching made it not centered. Dust, moisture and drop make it worse. We packed 4x PCB to fix the problem of drifting in one direction. Simply adjust the variable resistor to eliminate the drifting
  • [For most joystick problem] – The potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone, or it wouldn't center after years of wear and tear. De-soldering the unit with only 3Pins will be a lot easier than replacing the entire joystick with as many as 14 prongs
  • [Reminder of Replacement] – Use a pair of pliers to separate the problem sensor off the joystick module. Try to replace the wiper first, see if it works. De-solder the sensor off the PCB. A metal pick helps to clear the holes. Soldering the new unit in is a breeze. Remember to calibrate the new control sticks in settings
Rank No. #4
IKPEK 10pcs 2K3 Ohm Potentiometer Replacement for Dualsense PS5 Controller, Trim Pot Resistor Thumbstick Module Sensor for ALPS Analog Joystick
  • Compatibility -- 2K3 Ohm Potentiometer Compatible with PS5 Controller Only (NOT FIT for PS4 Xbox One Xbox One S/X Controller).
  • Solve Most Joystick Problem -- Stick drift, stuttering, dead zones, creeping, blind spots, non centered.
  • INSTALL -- This product will require moderate soldering to install.
  • Package Included -- 10 x 2K3 Ohm Potentiometer, 1 x Cross Screwdriver, 1 x Tweezer, 1 x Pry tools, 1 x Pry bar.
  • Customer Service & Warranty -- We provide 3 months warranty for replacement Potentiometer. If you have any problem about the product, please feel free to contact us, we will reply you with 24 hours.
SaleRank No. #5
Onyehn 8pcs Controller 3D Analog Joystick Thumb Sticks Replacement Repair Parts for Xbox One/Xbox Elite Controller Also for PS4 Controller(8 Pack)
  • NEEDS MODERATE SOLDERING.PROFESSINAL INSTALLATION IS HIGHLY RECOMMENDED,INSTRUCTION OR TOOL IS NOT INCLUDED.
  • Fix for problems like stick drift, creeping, stuttering, blind spots, dead zones, no click, non-centered, broken, and loose joysticks
  • Compatibility:Xbox One Wired Controller/Wireless Controller/PS4 Controllers
  • Replacement 3-pin analog stick for Xbox One.Compatible on Official Microsoft Xbox One/xbox elite Controllers and PS4 Controllers.
  • Package includes: (No retail package) 8 X 3D Analog Joystick
Rank No. #6
2X Alps Internal 3D Analog Thumb Sticks Joystick Thumbstick Replacement Compatible with Xbox Series X/Xbox Series S 2020 Controller
  • Alps Internal 3D Analog Thumb Sticks Joystick Thumbstick Replacement Compatible with Xbox Series X / Xbox Series S 2020 Controller
  • Tips: This is Alps Internal 3D Analog Thumb Sticks Joystick Thumbstick replacement to replace your old damage Alps Internal 3D Analog Thumb Sticks Joystick Thumbstick, don't include instructions, please install it by a professional technician.
  • Broken your Alps Internal 3D Analog Thumb Sticks Joystick Thumbstick, don't need to change new machine, just buy this item and replce your damage Alps Internal 3D Analog Thumb Sticks Joystick Thumbstick, let your Device work again again.
  • Compatible with: Xbox Series X / Xbox Series S 2020 Controller (Please check your machine model before your purchase)
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact us first, we will try our best to help you.
Rank No. #7
4pcs Joystick Replacement for PS4 Controller, Precision Accurate Thumbsticks Analog Part Stick Drift Fix Repair Kit for PS4 Xbox One Controllers
  • The replacement joysticks work for the PS4 CONTROLLER, XBOX ONE, X S CONTROLLERS
  • High quality joystick replacement repair your controller drift, stuttering, blind spots, dead zones, no click, non-centered issues, bring your controller back to life.
  • Made by FU joysticks, comes with 10k trimmer potentiometers, the whole joystick is interchangeable with EL1 ALPS 10K used in PS4 controllers, but the only the trim pot resistor alone is not interchangeable with ALPS edition.
  • Please Note: The JOYSTICK is SOLDERD to the CONTROLLER BOARD. You will need basic soldering skills along with a soldering station in order to complete this repair..
  • We back on our products! If you are not satisfied with your purchase within 90 days, please feel free to contact us. We will reply you within 24 hours.
Rank No. #8
JAO Automation True OEM Quality Joystick Analog Stick Replacement (2-Pack) Compatible with Xbox One, X, S, Elite, PS4, Switch Pro Controllers w/ 10k pots (not for 360 or PS3) High Precision Accurate
  • TRUE OEM QUALITY joystick replacement for Xbox One, X, PS4, Switch Pro and Shield controllers w/ 10k pots (not for 2k pot controllers, please measure)
  • Smooth linear taper on joystick sensors, no sudden transitions, quality controlled to 5% tolerance
  • Smooth 360 degree action, no binding in corners, clean return to center
  • Crisp toggle press switch with good tactile feedback.
  • I have serviced many controllers over a decade, these are the most accurate and reliable replacements available.
Rank No. #9
12pcs Replacement 3pin ALPS 3D Joystick Analog Thumb Stick for PS4 Controller 3 Repair Parts
  • It's a replacement 3pin ALPS 3D joystick Analog Thumb Stick original version.
  • The replacement Drive Rolleris compatible with PS4 only.
  • Professional repairment skills requried.
  • The Replacement 3pin ALPS Stick is only for repairing your broken, damaged or defective joystick of PS4 controllers.
  • Package: 12pcs of 3pin ALPS Stick
SaleRank No. #10
Zerone 3D Joystick Axis Analog Sensor Replacement Module, Replacement Analog Stick Joystick Parts for Xbox One Game Console Controller Repairing (4 Pack)
  • HigH Quality: The joystick is made of high quality material, sturdy, not easy to aging and wear-resistant, to ensure maximum strength and durability for long lasting usage.
  • 3D Technology: 3D Analog sensor joystick for Xbox One controller, you can enjoy different gaming experience.
  • Ideal Repaclement Part: This controller joystick is great replacement for damaged or broken one.
  • Easy Instllation: Game joystick is easy to install and convenient to use.
  • Application: This 3D joystick is suitable for Xbox One Console Controller.

Last update on 2024-03-26 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Alps Joystick?

Do you get stressed out thinking about shopping for a great Alps Joystick? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Alps Joystick, which is why we have assembled a comprehensive list of the greatest Alps Joystick available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Alps Joystick that you consider buying. Your questions might include the following:

  • Is it worth buying an Alps Joystick?
  • What benefits are there with buying an Alps Joystick?
  • What factors deserve consideration when shopping for an effective Alps Joystick?
  • Why is it crucial to invest in any Alps Joystick, much less the best one?
  • Which Alps Joystick are good in the current market?
  • Where can you find information like this about Alps Joystick?

We’re convinced that you likely have far more questions than just these regarding Alps Joystick, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Alps Joystick, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Alps Joystick. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Alps Joystick buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Alps Joystick currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Alps Joystick has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Alps Joystick?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Alps Joystick.
  5. Customer Ratings: Number ratings grade Alps Joystick objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Alps Joystick.
  7. Product Quality: You don’t always get what you pay for with an Alps Joystick, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Alps Joystick is should be an indication of how long it will work out for you.

We always remember that maintaining Alps Joystick information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Alps Joystick is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: