The Best An Fuel Fitting of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best An Fuel Fitting of 2022. Check our ranking below.
2,697 Reviews Scanned
- Package include: 2pcs 6AN Straight Push Lock Hose Fitting
- 6AN to 3/8 inch barb. Thread size of 6an: 9/16-18UNF
- The barb fitting only work with rubber fuel line
- Material: 6061-T6 aluminum alloy. Working pressure: 1500PSI. Temperature range: -40℉ to 248℉
- Easy to install. It is recommended to use clamps to enhance sealing
- Can be used on electric fuel pumps and regulators
- For Holley 12-289-11 fuel pump; for Holley 12-803/Bypass pressure regulator; for Ford Mustang 289 engine; for Chevy Small Block 350 fuel pump
- With 3/8″ NPT (National Pipe Thread) to 3/8″ hose ends
- Hose line fittings are made of high quality brass, which has good plasticity, can withstand cold and hot pressure processing well, and has good welding and corrosion resistance
- Please feel free to contact us if you have any questions about our products
- [Size] The thread size of 6an is 9/16-18UNF. The ID of spring lock is 3/8 inch and 5/16 inch.
- [Seal] The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.
- [Parameter] Working pressure: 1500psi, Temperature range: -40°F to 176°F.
- [Material] Made of aluminum alloy 6061-T6. Spring lock is made of plastic.
- [Application] Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc.
- MAIN USAGE：Fuel hose brass fitting is a custom made fitting , can be used on electric fuel pumps and regulators ；
- COMPATIBILITY：Fuel hose brass fitting Compatible with Holley 12-289-11 fuel pump , Holley 12-803/Bypass pressure regulator , Ford Mustang 289 engine , Chevy Small Block 350 fuel pump ;
- MAIN PARAMETER：This fitting machined from High quality brass ,come with 3/8″ male NPT to 3/8″ hose ends , package include 2 Fuel hose fitting and 2 stainless steel clamps；
- CONVENIENT：Stainless steel clamps attached can help you to complete the work quickly;
- SATISFACTORY CUSTOMER SERVICE: Yemtuls Guarantee with One Year Limited Warranty & Free Lifetime Technical Support 30 days full refund with returned undamaged Yemtuls fuel hose fitting . Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.
- Quick connect AN 6 male flare to 3/8" SAE male push on pipe hose fitting -Specialty Fuel
- Manufactured from high performance lightweight 6061-T6 billet aluminum material
- Black Anodized Finish for Durability and Strength
- Compression male thread to push on tube connectors
- AN to male thread GM fuel line quick connect / QC lighht weight aluminium alloy reusable tube/tubing connector/ adaptor
- 6 an female thread (JIC-6, 9/16"-18) swivel to 3/8 hose barb tube connector, straight
- Manufactured from lightweight 6061-T6 cnc machined billet aluminum alloy
- Tight, leak-free connections and then black anodized for durability
- Precision machined to exacting tolerances for trouble-free, ensure accurate thread engagement
- Allow for the connection of hose ends to other components like oil pumps, fuel pumps and fuel filter
- Size: AN6 (9/16-18 UNF) male flare to 5/8"x20 male thread
- Manufactured from lightweight 6061-T6 aluminum, comes with aluminum sealing washer
- Anodized finish for strength, durability and anti-corrosion
- Works with Edelbrock, Carter, and AFB carbs with 5/8-20 inlets
- All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels
- Package Includes: 100% New 6 AN (Male) to 3/8 (Female) and 6 AN (Male) to 5/16 (Female) Quick Connect Adapter Fitting
- Premium Materials: Fuel rail adapter fittings are made of 6061-T6 aluminum, coated with a durable corrosion-resistant coating, polished to resist corrosion and oxidation for extended use
- The End can be used steel braid or various other AN hoses and fittings when pipe LT1 or LS is exchanged
- Applicable Fuel Rails: Fit for LT1 Corvette 1992-1996, fit for LT1 Trans Am/Camaro1993-1997, fit for LS1 Corvette 1997-1998, fit for LQ4/LQ9 Truck rails 1999-2004
- Customer Service: If you have any questions about our products, please contact us in time, we will reply you within 12 hours
- What you will receive: there are a total of 2 pieces fitting adapters, and equipped with 2 pieces brass inserts in the package, adequate quantity can meet your daily use and replacement demands, which can replace the broken one or old one, and you can share with your close friends, family members, colleagues and people who need them
- Sturdy material: these fuel fittings are made of quality aluminium alloy, firm and solid, will not break or deform easily, with metallic luster, can keep bright after long term use, the surface and edge are polished carefully, skillful workmanship makes them smooth to touch, do not worry they will scratch your hands or cars while using, not easy to wear and tear
- Size details: this fuel line adapter fitting is measured approx. 1.77 inches in length and 0.59 inch in width, appropriate in size and light in weight, convenient for you to use and store; And which is 6 AN to 3/ 8 inch, the thread size of the 6 AN is 9/ 16 UNF, and it fits to 3/ 8 inch OD hardline, please measure before purchase
- Wide application: the fuel line adapter can be widely applied on a variety of occasions and equipment, such as braking system, air and fuel delivery, engine modification, oiling system, cooling system, refueling system and so on, brings much convenience to these processes, to make them smoother and increase your productivity
- Practical accessory: these 6 AN adapters can work at a maximum pressure of 4000 PSI, and the operating temperatures range from - 65 degrees Fahrenheit to 252 degrees Fahrenheit, the black exterior looks simple and clean, and matches your engine color better, not only beautiful but also very practical
- 100% Brand New pair of fuel rail fitting adapters.
- CNC Machined from 6061-T6 Aluminum. Black anodized for great appearance and anti-corrosion
- Specification : 6 AN (male) to 3/8 & 5/16 (female) GM Quick Connect Straight Adapter Fitting
- These ends allow you to use steel braided or a variety of other AN hose and fittings when plumbing your LT1 or LS swap. These just push on over your existing fuel rail ends and are held in place with durable clips
- Fits the following fuel rails:1992-1996 LT1 Corvette, 1993-1997 LT1 Trans Am/Camaro, 1997-1998 LS1 Corvette , 1999-2004 LQ4/LQ9 Truck rails
Last update on 2023-11-08 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best An Fuel Fitting?
Do you get stressed out thinking about shopping for a great An Fuel Fitting? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching An Fuel Fitting, which is why we have assembled a comprehensive list of the greatest An Fuel Fitting available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for An Fuel Fitting that you consider buying. Your questions might include the following:
- Is it worth buying an An Fuel Fitting?
- What benefits are there with buying an An Fuel Fitting?
- What factors deserve consideration when shopping for an effective An Fuel Fitting?
- Why is it crucial to invest in any An Fuel Fitting, much less the best one?
- Which An Fuel Fitting are good in the current market?
- Where can you find information like this about An Fuel Fitting?
We’re convinced that you likely have far more questions than just these regarding An Fuel Fitting, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for An Fuel Fitting, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible An Fuel Fitting. Make sure that you are only using trustworthy and credible websites and sources.
We provide an An Fuel Fitting buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available An Fuel Fitting currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of An Fuel Fitting has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an An Fuel Fitting?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your An Fuel Fitting.
- Customer Ratings: Number ratings grade An Fuel Fitting objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their An Fuel Fitting.
- Product Quality: You don’t always get what you pay for with an An Fuel Fitting, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an An Fuel Fitting is should be an indication of how long it will work out for you.
We always remember that maintaining An Fuel Fitting information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding An Fuel Fitting is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.