The Best Arduino Laser Detector of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Arduino Laser Detector of 2022. Check our ranking below.
2,022 Reviews Scanned
- 🥇【Specification】Laser Receiver Module & Transmitter Module Working Voltage: 5V; KY-008 Light Source Wavelength:650 nm
- 🥇【Size】Laser Sensor Size: 15 x 22mm / 0.59 x 0.86inch; KY-008 Sensor:15 x 24mm / 0.59 x 0.94inch
- 🥇【Note】This sensor uses a non-modulated laser receiver. Please use it in a place where there is no light indoors. Sunlight or other lamps may interfere. It is recommended to use it in a dark environment.
- 🥇【Application】Widely use for arduino project, hobby, science experiments, industrial and etc.
- 🥇【Package Content】The package comes with 4 x Laser Sensor Receiver Module, 4 x KY-008 650nm Laser Transmitter Module, 1 x 11.8inch Female-Male Dupont Cables 25 PIN
- The VL53L0 uses ST's FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained lidar system.
- ST's VL53L0 module is simple and easy to use (6 valid pins), provides an I2C interface, is equipped with a full set of API drivers and technical documents, making system integration fast and simple. The module package supports the reflow soldering process, complies with the RoHS hazardous substance restriction standards, and is fully compatible with various glass covers and appearance designs.
- Unlike traditional infrared proximity sensors, the color and reflected light of the target object will not affect the distance measurement results. But its effective range and accuracy largely depend on environmental conditions and target characteristics, such as reflectivity and size, and sensor configuration. (The accuracy of the sensor is specified as ±3% at the highest, and it is over ±10% under the next best conditions.)
- The internal laser emits non-visible light with a wavelength of 940nm, which does not harm the eyes, eliminates the problem of distracting people from emitting red light with other infrared proximity sensors, and enhances the anti-interference performance of external light sources. The sensor's digital architecture and automatic compensation function make it still have a high performance in scenes with high ambient light intensity.
- The sensing capability of VL53L0X can support various functions, including gesture sensing or proximity of various innovative user interfaces; wall detection, cliff detection, and collision detection of household appliances such as sweeping robots; bathroom products, such as faucets, soap dispensers, and Cell phones and flushers; other target applications include laptop user presence or power switch monitors, drones and Internet of Things (IoT) products.
- Operating voltage: 5V
- Source wavelength: 650 nm
- Apply to: for Arduino AVR
- Model: 1*Laser Receiver Sensor Module+ 1* KY-008 Laser Transmitter Module
- Laser Receiver Sensor Module uses the non modulated laser receiver, please use in the room where without the light, the sunlight or other lamps and lanterns will interfere, suggested in the dark environment use.
- The sensor uses a non-modulated laser receiver.
- Please use this sensor in dark environments or indoors where no light. Sunlight or other fixtures may interfere.
- It output high level when receive laser signal, and low level when not.
- If you buy 1, you will receive 5pcs sensor
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will solve your problem in 24 hours.
- Operating voltage: 5V; KY-008 Output wavelength:650 nm
- Output: High level when there is laser irradiation, low level when there is no laser irradiation.
- Laser Sensor Size: 15 x 22mm / 0.59 x 0.86inch; KY-008 Sensor:15 x 24mm / 0.59 x 0.94inch
- Note:This sensor uses a non-modulated laser receiver. Please use it in a place where there is no light indoors. Sunlight or other lamps may interfere. It is recommended to use it in a dark environment.
- Package Content:4 x Laser Sensor Receiver Module, 4 x KY-008 650nm Laser Transmitter Module, 1 x 11.8inch Female-Male Dupont Cables 25 PIN
- Supply voltage: 5V
- Output: High level when there is laser irradiation, low level when there is no laser irradiation.
- This sensor uses a non-modulated laser receiver. Please use it in a place where there is no light indoors. Sunlight or other lamps may interfere. It is recommended to use it in a dark environment.
- Size: 1.52CM*2.22CM (1CM=0.393inch)
- We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
- 1.The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product.
- 2.The VL53L0 uses ST's FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained lidar system.
- 3.Ranging measurements are available through the sensor's I⊃2;C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output.
- 4.The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V. Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible.
- 5.A time-of-flight ranging system integrated into a compact module
- Advantage: A time-of-flight ranging system integrated into a compact module
- Strong point: A carrier for the VL53L0X
- Accuracy: Range from ±3% at best to over ±10% in less optimal conditions
- Maximum Sensoring Distance: 2m
- Working Voltage: 2.6V - 5.5V
- Waveshare Laser Sensor Detector Module for Arduino STM32 Obstacle detection Smart car Module
- Laser Sensor
- Features boost circuit
- Signal output indicator
- Laser Sensor Detector Module Receiver Transmitter for Arduino AVR PIC Application for Obstacle detection Pipeline Counter Smart Robot Obstacle-avoiding Car
Last update on 2024-08-11 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Arduino Laser Detector?
Do you get stressed out thinking about shopping for a great Arduino Laser Detector? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Arduino Laser Detector, which is why we have assembled a comprehensive list of the greatest Arduino Laser Detector available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Arduino Laser Detector that you consider buying. Your questions might include the following:
- Is it worth buying an Arduino Laser Detector?
- What benefits are there with buying an Arduino Laser Detector?
- What factors deserve consideration when shopping for an effective Arduino Laser Detector?
- Why is it crucial to invest in any Arduino Laser Detector, much less the best one?
- Which Arduino Laser Detector are good in the current market?
- Where can you find information like this about Arduino Laser Detector?
We’re convinced that you likely have far more questions than just these regarding Arduino Laser Detector, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Arduino Laser Detector, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Arduino Laser Detector. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Arduino Laser Detector buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Arduino Laser Detector currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Arduino Laser Detector has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Arduino Laser Detector?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Arduino Laser Detector.
- Customer Ratings: Number ratings grade Arduino Laser Detector objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Arduino Laser Detector.
- Product Quality: You don’t always get what you pay for with an Arduino Laser Detector, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Arduino Laser Detector is should be an indication of how long it will work out for you.
We always remember that maintaining Arduino Laser Detector information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Arduino Laser Detector is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.