The Best artillery sidewinder x1 of 2025 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best artillery sidewinder x1 of 2025. Check our ranking below.
2,041 Reviews Scanned
Rank No. #1
Artillery Sidewinder X1 Extruder Kit All-in-one Single Extruder Replacement for Artillery Sidewinder X1 3D Printer
- 1.Original artillery sidewinder x1 extruder parts for Artillery Sidewinder X1 ( V2, V3, V4 but not for V1) 3D printer
- 2.The artillery sidewinder x1 extruder parts is easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level
- 3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock
- 4.Direct drive artillery x1 extruder, great support for flexible filament
- 5 The PCB on the Artillery sidewinder x1 V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase
Rank No. #2
Upgraded Full Metal Extruder for Artillery Sidewinder X1 Hotend Assembly Replacement All Metal Hotend for SW-X1 3D Printers
- Extruder: Upgraded full metal extruder designed use for artillery sidewinder x1.
- Easy Installation: Replace the extruder in just minutes by removing screws and reconnecting the tape cable.
- Enhanced Design: All metal hot end, includes a complete hot end with ABL, E-axis board, thermistor, heating rod, heat sink block pre-installed.
- Compatible Replacement: Designed specifically for Artillery Sidewinder X1,
- Flexible Filament Support: Direct drive extruder for smooth printing with more filaments.
Rank No. #3
3D Printer Extruder Heater Cartridge Thermistor 0.4-1.2mm Nozzles Metal Titan Handle Hotend Kit Compatible with Artillery Sidewinder X1 X2 Genius Pro Volcano Hot End
- Heater cartridge: 24V 64W; thermistor: NTC 100K 3950B. Compatible with Artillery Sidewinder X1 X2 Genius / Genius Pro 3D Printer
- Handle is made from Aluminum, can replace the plastic handle directly, more stable and longer lifetime.
- 9pieces Nozzles (1pc 0.3, 4pcs 0.4, 1pc 0.6, 1pc 0.8, 1pc 1.0 and 1pc 1.2mm) will come in this parcel, made of international brass material, very good thermal conductivity, smooth surface and wall to make the feeding with less resistance
- 1pc V6 threaded heatbreak and 1pc smooth heatbreak are made of high quality stainless steel material and with straight through hole to reduce the cloging.Two types heatbreaks can fit different heatsink, so that our customer can have double choices for the heatsink.
- Package: 1pc heater, 1pc thermistor, 1pc v6 threaded heatbreak, 1pc smooth heatbreak, 1pc heat block, 1pc silicone cover, 1pc alu handle and 9pcs nozzles
Rank No. #4
12Pcs Volcano Nozzles 0.4mm, Vyper Nozzles M6 Thread Hotend Extruder Volcano Nozzle Compatible for Artillery Genius, Sidewinder X1, X2, Anycubic Vyper, Anycubic Kobra Plus, Kobra Max 1.75mm Filament,
- Package Contents: 12Pcs 3D Printer V6 Volcano Nozzles 0.4mm.( 3D Printer V6 Brass Nozzles);
- 3D Printer Volcano Nozzles Input Diameter: 1.75mm; Output Diameter: 0.4mm; Screw Thread: M6 Thread Connection.
- 3D Printer Brass Volcano Nozzle M6 Thread Nozzles 0.4mm Compatible with V5 V6 1.75mm Volcano Hotend, PT100 Volcano Hotend, Anycubic Vyper, Anycubic Kobra plus, Anycubic Kobra Max, Artllery Sidewinder X1 X2 Genius Pro 3D Printers,and V5-V6 1.75mm Filament PLA ABS 3D Printers etc.
- 3D Printer V6 Nozzles Made of Hardened Steel, the interior of nozzle is smooth without burrs, avoid blocking of the filament on the rounded chamfer, make out of filament more smoother.
- M6 0.4mm 3D Printer V6 Nozzles made of brass, sturdy and high-temperature resistant, suitable for hiah temperature 3D printing that other nozzle cannot handle.
Rank No. #5
IdeaFormer-3D PET+PEI Magnetic Build Plate 310x310mm, Double Sided PET+PEI Spring Steel Sheet for Artillery Sidewinder X1, Sidewinder X2, Anet A8 Plus, Longer LK, LK5 Pro CR10, CR10S, for QiDi Plus 4
- 【Textured PEI + Smooth PET Magnetic Build Plate】PEI + PET double-sided printing plate, one side is a smooth PET film, the underside of the printed model is smooth and the model is easy to remove and clean. The other side is PEI frosted surface, the frosted sticker surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping.
- 【Compatible Filaments】PET spring steel palte only prints PLA filaments; PEI sheet print most filaments such as PLA / ABS / PETG / TPU / nylon.
- 【High Temperature Resistance】The PET printing plate is resistant to high temperatures of 120°C and the PEI sheet is 260°C.
- 【Easy to Use and Remove】No more tape, glue, shovel and release your pressure anxiety. Prints can be easily removed by hand once the build surface has cooled.
- 【Compatible 3D Printers】Our double-sided textured PET+PEI build plate fit 3D printers with a platform size of 310x310mm, such as for Ender CR-10, CR-10S for Artillery Sidewinder X1 for Artillery Sidewinder X2, Longer LK5, LK5Pro, Longer LK1, for QiDi Plus 4.
Rank No. #6
3D Printer Extruder Kit with Heater Cartridge Thermistor Fit for Artillery Sidewinder X1 X2 with Silicine Socks Heating Block All Metal Throat Nozzles
- Compatible Models: Fit for Artillery Sidewinder X1 X2, equipped with a set of silicone socks and heating blocks, one for all metal throats, and three Nozzles
- Widely Used Filament: The hot end supports multiple materials, fit for 1.75mm PLA/ABS/WOOD/PVA/HIPS
- Heat Dissipation Performance: Heat-resistant aluminum heating block, equipped with a silicone protective sleeve, wrapped around the heating block to avoid accidental hand contact with the heating block and burns, and to make the nozzle and heating block cleaner and tidier
- Easy to Install: Simply remove the old one and then install the new one back, which is easy to operate and very easy to install
- Products Include: 1 x 3d printer extruder kit. If you have any problems with the products you received, please contact us in time
Rank No. #7
5-Pack Volcano Hotend Block Silicone Sock Cover 300C High Temperature Compatible with Vyper Kobra Max/Kobra Plus 3D Printer Artillery Sidewinder X1 X2 Genius Titan Extruder Hotend
- Good edge treatment, It can be assembled more perfectly and is very beautiful
- This Silicone socks are designed for Volcano thermistor type heater block which size is 20x20x12mm, Not suitable for PT100 cartridge type heater block.
- Silicone sock can keep heater block clean and also can be keep warm to make the printing temperature more stable
- these silicone socks are compatible with AC Vyper Kobra Max/Kobra Plus 3D Printer Artillery Sidewinder X1 X2 Genius Titan Extruder Volcano Hotend heater block
- Package: 5pieces silicone socks (PLEASE NOTE: This silicone sock only can be used under 300C degree, if your printing temperature is over 300C, please remove it.)
Rank No. #8
Upgrade POM Extruder Gear + Idler Arm U Groove Gear Bearing Kit Compatible with Metal Titan Aero Extruder Sidewinder X1 X2 Genius Prusa i3 MK2 4max pro Chiron 3D Printer
- This idler arm is upgraded with U groove gear bearing to replace the old version with smooth surface bearing. A groove in the middle, the filaments are not easy to slip when you printer works.
- Big gear is made of POM and stainless steel matieral, both are machined with high presicion CNC, Teeth is sharp, Uniform, Longer lifetime, making the filament feeding more stable and smooth.
- Used for 1.75mm filament
- Compatible with original titan extruder, titan aero extruder, Prusa i3 MK2 3D Printer, Sidewinder X1 X2, Genius printer's extruder, Anycubic Chiron, 4max pro and Sovol SV01 D Printer
- Package: 1piece Gear, 1piece idler arm assembled with U groove gear bearing and 2pcs springs
Rank No. #9
BiMetal All Metal Titanium Copper Thermal Barrel Tube Compatible with Sidewinder X1 X2, Original Kraken Chimera + Cyclops Plus Muti Color Hotend 3D Printer (Smooth Version)
- Total length: 20.5mm ,This Heatbtreak is made from two components, Copper and Titanium TC4.
- Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.can reach up to 500C degree
- The inner wall of the titanium is very smooth so that the filament can pass through and reduce clogging
- Compatible with HOT END:Original Chimera Chimera+ Cyclops Cyclops Plus Muti color Hotend,Ender 2/Ender 3/Ender 3 PRO/Ender 5/6,CR-10/CR-10 mini/CR-10 S4,TronXY X5S/ TronXY X2 PRO/TEVO
- Package included: 1 piece Upgrade Bi-metal heatbreak
Rank No. #10
310x310mm PEI Build Plate – Double-Sided Textured Flexible Spring Steel Bed, Compatible with Qidi Plus 4, Creality CR-10, Artillery Sidewinder X1/X2, Anet A8 Plus 3D Printers
- 【Upgraded Packaging】Includes 1 textured PEI steel build plate and 2 bonus SK5 scraper blades. Blades are handle-free—please 3D print your own and use standard 0.2-inch screws if needed. Enjoy better adhesion and easier print removal.
- 【Key Benefits & Features】 Unlike smooth PEI sheets, our flexible build plate features a double-sided textured PEI surface that delivers exceptional adhesion and reduces warping—no glue or tape needed. Made from premium spring steel and coated with our proprietary dual-layer PEI, it withstands high temperatures up to 300°C with zero deformation. Perfect for PLA, ABS, PETG, PC, and more. Plus, the reusable double-sided design means twice the printing surface, less waste, and more value for your money. Durable, reliable, and built to last—this is the build plate your 3D printer deserves
- 【Usage Guide & Precautions】: Upon receiving the steel plate, carefully peel off the protective film and clean the surface with alcohol to maintain cleanliness. When leveling, pay close attention to the nozzle-to-PEI distance (recommended 0.2–0.3mm) to prevent scratches. Precise control is ensured through real-time sensor feedback and dynamic compensation. Note: Any damage or contamination to the PEI surface will affect its lifespan and print quality. This package includes 2 scraper blades only—no handles or screws. For use, please 3D print your own handle and purchase standard 0.2-inch diameter screws separately.
- 【Easy Print Removal & Simple Cleaning】 The flexible spring steel build plate allows you to easily remove prints. After printing, simply let the platform cool naturally to room temperature for automatic release, or gently flex the plate to quickly remove the model without causing any damage. Clean the PEI surface with 75% alcohol or mild soapy water to remove residue. For stubborn stains, preheat the plate to 150°C and gently scrub with a soft brush to ensure optimal adhesion for every print.
- 【Wide Compatibility & Quality Guarantee】This double-sided PEI spring steel sheet is designed for 3D printers with a 310x310mmmm platform size, such as the QIDI PLUS4, CR10,CR10S,Artillery Sidewinder X1, Sidewinder X2, Anet A8 Plus, Longer LK, LK5 Pro 3D Printer. Before ordering, please confirm your 3D printer's platform size to ensure a perfect fit. All spring steel build plates have been subjected to quality inspection prior to delivery. Additionally, we offer excellent after-sales service. If you have any questions or suggestions, please feel free to contact us at any time, and we will resolve your issues as quickly as possible.
Last update on 2026-03-14 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best artillery sidewinder x1?
Do you get stressed out thinking about shopping for a great artillery sidewinder x1? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching artillery sidewinder x1, which is why we have assembled a comprehensive list of the greatest artillery sidewinder x1 available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for artillery sidewinder x1 that you consider buying. Your questions might include the following:
- Is it worth buying an artillery sidewinder x1?
- What benefits are there with buying an artillery sidewinder x1?
- What factors deserve consideration when shopping for an effective artillery sidewinder x1?
- Why is it crucial to invest in any artillery sidewinder x1, much less the best one?
- Which artillery sidewinder x1 are good in the current market?
- Where can you find information like this about artillery sidewinder x1?
We’re convinced that you likely have far more questions than just these regarding artillery sidewinder x1, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for artillery sidewinder x1, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible artillery sidewinder x1. Make sure that you are only using trustworthy and credible websites and sources.
We provide an artillery sidewinder x1 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available artillery sidewinder x1 currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of artillery sidewinder x1 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an artillery sidewinder x1?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your artillery sidewinder x1.
- Customer Ratings: Number ratings grade artillery sidewinder x1 objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their artillery sidewinder x1.
- Product Quality: You don’t always get what you pay for with an artillery sidewinder x1, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an artillery sidewinder x1 is should be an indication of how long it will work out for you.
We always remember that maintaining artillery sidewinder x1 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding artillery sidewinder x1 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.