The Best Axle Shaft Removal Tool of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Axle Shaft Removal Tool of 2022. Check our ranking below.
2,089 Reviews Scanned
Rank No. #1
Tiger Tool Axle Shaft Puller for Commercial Heavy Duty Transportation Trucks and Equipment, Axle Shaft Puller for use with Class 6-8 Semi Trucks, 11001
- With the Tiger Tool 11001 you can easily remove even the most seized axle shaft in minutes on medium to heavy-duty Dana, Eaton and Rockwell drive axles. This part number includes most common 5/8” – 18 Axle Stud Adapter Set; additional adapter sets also available.
- Application: Commonly found on class 6-8 transportation trucks and equipment. (for use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo etc.)
- The Axle Shaft Puller has fully adjustable pulling arms and stud adapters are quick and easy to install. This tool reduces the risk of damage to axle studs. The 11001 is made from top grade metals and various treatments safeguard the integrity of the driver, enabling it to be struck again and again.
- The head of the driver is rounded, ensuring the load of the hammer’s force is more accurately distributed down the center of the tool. Pull-cams are preloaded behind the axle flange. The force of the impact shocks the cone washers free, allowing the axle shaft to be released with ease. Pull cams are heat treated to minimize wear and prevent rounding off – maintaining the tool’s longevity and effectiveness.
- The Tiger Tool Commercial Axle Shaft Puller, part number 11001, is proudly made in North America to ensure you have what it takes to get the job done right.
Rank No. #2
Sunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints
- Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !
- Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life
- Benefits: Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release (Two piece CV axle popper tool kit ensures fitment for most FWD vehicles)
- Easy installation: Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool !
- 100% Satisfaction Guarantee: If you're not 100% satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Rank No. #3
ARES 12020-2-Piece Axle Popper Kit - Includes Fork and Shim - for Use on Front Wheel Drive Vehicles - Break Half Shafts Loose from Transaxle
- ITEM SPECIFICATIONS: This 2-Piece Axle Popper Set includes a 14-inch fork and a shim for quicker, easier, and safer work on front wheel drive vehicles when you need to break half shafts loose from the transaxle. The fork opening measures 1 7/8 inches. Note: This kit is not suitable for use on all vehicles. Check your vehicle specs to ensure proper fit.
- DESIGN CONSIDERATIONS: The two piece design of this kit means that users have multiple options for the safest and most efficient possible use. Strike the axle popper wedge or use it as a prybar to release the half shaft, and when you need something to fill the gap between the half shaft and transaxle, the included shim is the perfect tool for the job. The forked ends of these tools apply even pressure to both sides of the shaft you're working on for safer use, so it's easy to get the job done.
- APPLICATIONS: Whether you're a diy-er working out of your own home or a professional in a transmission shop, garage, or tire or body shop, this kit will allow you to break half shafts loose from the transaxle on front wheel drive vehicles quickly, easily, and safely thanks to the forked design's even pressure application.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 2-Piece Axle Popper Kit, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
Rank No. #4
LainKeen Inner CV Joint Puller Front Wheel Drive Axle Half Shaft Removal Tool Kit with Heavy Duty 10 Pounds Slide Hammer, 63mm 48mm CV Joint Fork Adapter Attachments
- Remove CV Axle Easily: Using the CV joint puller, you can easily pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts.
- Heavy Steel Slide Hammer: The slide hammer and the VC join fork is made of heavy duty steel, which can withstand huge pressure without deformation, is not easy to break. slide hammers are heavier and larger than normal ones, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, the length is 19.5 inches, so it can generate greater pulling force and work easier.
- Efficient Slide Hammer: The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently.
- Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm are suitable for most vehicle models and have a wide range of uses.
- Packing List: 1 heavy duty slide hammer; 1 opening 63mm cv joint fork; 1 opening 48mm cv joint fork; 1 manual puller; 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft. We offer 12 months warranty, any questions, please feel free to contact us.
Rank No. #5
ABN Axle Popper Kit - 2 Piece Inner CV Axle Removal Tool Set CV Popper Wedge and Shim Ball Joint Separator Tools
- [Remove CV Axle Joints Effortlessly] Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, and use the ABN 2 Piece Axle Popper Forks Ball Joint Press Kit to quickly and easily loosen the half shafts from the transaxle on your front wheel vehicles
- [Fits your Needs] Solid steel fork design has a 2-inch (5.1cm) opening space to fit around your CV axle shaft; Both the wedged and the shim split ends have a 1/2-inch (1.3cm) width and a 2.5-inch (6.4cm) length; Popper wedge starts at a depth of 1/4-inch to fit into tight spaces when working
- [Safe for your Vehicle] Forked ends allow you to apply even pressure to both sides of the axle shaft to ensure a safe release unlike pry bars and slide hammers; Two piece CV axle popper tool kit ensures fitment for most FWD vehicles
- [Easy to Use] Insert the wedge wheel bearing tool between the transaxle case and the axle joint with the forked ends surrounding the shaft; Strike the end of the fork to release the half shaft; Use the shim popper to fill in larger gaps found on some vehicles
- [Built to Last] Package includes a 14 inch long (35.6cm) wedged CV axle fork and a 14 inch long (35.6cm) sham spacer fork; Constructed of drop-forged steel with a metallic finish, these CV joint puller ball joint tools provide maximum strength and durability
Rank No. #6
KUNTEC CV Joint Puller Propshaft Separator Tool CVJ CV Axle Removal Tool Universal Joint Removal Tool
- Quickly removes the CV joint from the drive shaft without damaging the joint and keeps hands free for releasing retaining circlip
- CV joint removal tool includes 9 holes to allow full adjustment that suits different lengths of joint assemblies on most cars
- CV joint puller reduces the risk of damaging the joint, transmission, or other parts
- 24cm x 14cm overall dimensions with 100mm maximum CV joint diameter
- CV joint remover is made of high quality galvanized metal iron material, sturdy and durable
Rank No. #7
DearChan 12020 Front Wheel Drive Axle Puller/Fork & Shim Tool + CV Axle Removal Tool / 1040 CV Joint Fork Removing Adapter, Use to Break Half Shafts Loose from Transaxle, Fix Damaged CV Joints
- 【CV Axle Wedge and Popper Set】Use to quickly and easily loosen the half shafts from the transaxle on your front wheel vehicles without damage to your vehicle; Insert fork between transaxle case and half shaft then strike the end of the fork to release the half shaft; Forked ends allow you to apply even pressure to both sides of the axle shaft to ensure a safer release than pry bars and slide hammers.
- 【Professional Design Tools】 Both the wedged CV axle fork and the sham spacer fork have a 14-inch long handle, the split end with a 3-inch wide opening space to fit around your CV axle shaft; Popper wedge starts at a depth of 1/4-inch to fit into tight spaces when working.
- 【CV Joint Slide Hammer Adapter】Designed to pull joints with hidden retaining rings from FWD vehicles, can pull CV joints on 1986-current Taurus/Sable; focusing the added torque to the back of the housing, it won't cause any possible damage to the roller bearing inside the joint.
- 【Easy to Operate】Works with slide hammers with 5/8-inch x 18 threads, to create added torque to loosen and remove stubborn axle shafts and water pumps. Connect the inner CV removal tool to the slide hammer, slide the adapter around the shaft behind the inner boot, using the slide hammer to create torque to pull out the axle.
- 【Ultra-Strong Craftsmanship】 These tools are made of superior heavy duty steel for high strength, corrosion and wearing resistance, great reliability and long service life. Perfectly for diy-ers and professionals in a transmission shop, garage, or tire or body shop, use to replace or repair your constant velocity (CV) axle joints quickly and easily.
Rank No. #8
Kiene Diesel Accessories Axle Shaft Remover (KEI-K-1280)
- Fast, Safe way to remove an axle, without damage to studs or mechanic
- No flying metal fragments from the axle, becuse the hammer doesn't strke the axle
- Rugged , lightweight tool installs in less than a minute
- Works every time no mater how badly the axle is stuck
- Extends byond the wheel and keeps hands from hitting the vehicle
Rank No. #9
Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments
- Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components
- Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break
- Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently
- Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use
- Combinnation Kit: This kit include: 1 heavy duty slide hammer; 1 opening 63mm cv joint fork; 1 opening 48mm cv joint fork; 1 manual puller; 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry, and we offer 12 months warranty, we will refund or replace, if the tool have any quality problem
Rank No. #10
10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters
- 🔧Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components
- 🔧Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently
- 🔧Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case
- 🔧Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials with high persistence and durability, not easy to break
- 🔧Easy to Use: Attach the CV joint puller to the slide hammer; Then slide the CV axle puller adapter around the shaft behind the inner boot; At last use the slide hammer to create added torque to pull out the axle. Fit most vehicles like Compatible for Ford Taurus/Sable 1986-2021
Last update on 2023-02-02 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Axle Shaft Removal Tool?
Do you get stressed out thinking about shopping for a great Axle Shaft Removal Tool? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Axle Shaft Removal Tool, which is why we have assembled a comprehensive list of the greatest Axle Shaft Removal Tool available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Axle Shaft Removal Tool that you consider buying. Your questions might include the following:
- Is it worth buying an Axle Shaft Removal Tool?
- What benefits are there with buying an Axle Shaft Removal Tool?
- What factors deserve consideration when shopping for an effective Axle Shaft Removal Tool?
- Why is it crucial to invest in any Axle Shaft Removal Tool, much less the best one?
- Which Axle Shaft Removal Tool are good in the current market?
- Where can you find information like this about Axle Shaft Removal Tool?
We’re convinced that you likely have far more questions than just these regarding Axle Shaft Removal Tool, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Axle Shaft Removal Tool, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Axle Shaft Removal Tool. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Axle Shaft Removal Tool buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Axle Shaft Removal Tool currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Axle Shaft Removal Tool has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Axle Shaft Removal Tool?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Axle Shaft Removal Tool.
- Customer Ratings: Number ratings grade Axle Shaft Removal Tool objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Axle Shaft Removal Tool.
- Product Quality: You don’t always get what you pay for with an Axle Shaft Removal Tool, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Axle Shaft Removal Tool is should be an indication of how long it will work out for you.
We always remember that maintaining Axle Shaft Removal Tool information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Axle Shaft Removal Tool is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.