The Best Cr-10 Dual Extruder Mod of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Cr-10 Dual Extruder Mod of 2022. Check our ranking below.
2,997 Reviews Scanned
Rank No. #1
Sunhokey Dual Gear Extruder, Aluminum Dual Drive Extruder Upgrade Kit, Compatible with Creality Ender 3 CR10 CR-10 Pro CR-10S, Drive Feed for 3D Printer 1.75mm Filament
- ✔️New double gear extrusion mechanism, high extrusion force, ensuring smooth feeding.
- ✔️Upgrade: Better pressure pushes the filament into the printer nozzle, works with Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.
- ✔️All-metal aluminum alloy, High-quality dual gear extrusion, stable and durable.
- ✔️For 1.75mm Filament. This Kit does not include the stepper motor and instruction manual , we need to DIY.
- ✔️After-sales guarantee: each defective item can be a replacement for free or refund. Any questions, please feel free to contact or QA us, we will try our best to service you.
Rank No. #2
Bigtreetech Upgrade Dual Gear Extruder, Double Gear MK8 Extruder 3D Printer Dual Driver Stock Feeder All Metal 1.75mm Filament Extruder Kit for CR-10S Pro/CR-10/ Ender 3 V2/Ender 3/Ender 3 Pro Series
- 💓【Upgraded Dual Extruder】Dual gears and dual pneumatic combined extrusion structure, large extrusion force, enhanced feeding intensity, ensuring smooth feeding. The double gear rotation design locks the filament, which is beneficial to improve printing quality and reduce filament slipping, high-speed extrusion or retraction, better pressure to push the filament into the printer, less easy to lose steps, faster printing speed
- 💓【Compatibility】Double gear mk8 extruder, perfect replacement for 3D printer CR-10/ CR-10S/ CR-10S Pro/ Ender 3 (initial version)/Ender 3 v2/Ender 3 pro/Ender 5/Tornado, etc. 1.75 mm filament (Set only for 3D printers with motor shafts exceeding 20mm, please measure the shaft length before placing an order.)
- 💓【Stable and Durable】All metal aluminum alloy, high quality double gear extrusion, compared with ordinary plastic drive, this high aluminum metal filament extruder is stable and durable. The idler gear has been upgraded with a brass washer added between the stainless steel gear and the aluminum housing, so the gear does not collide seriously with the housing, which helps reduce stock extruder wear.
- 💓【Adjustable Spring】The tension of the extrusion spring can be adjusted by tightening the screw, which greatly improves printing accuracy and paper feeding problems. Strong extrusion end spring enhances feeding strength and ensures stable pushing of filaments into the hot end of the printer. Suitable for most types of filament, such as ABS, PLA, TPU, PTEG etc.
- 💓【Imported Materials】The 3d printer dual extruder material is made of brand new imported aviation aluminum material and processed by CNC imported from Japan. The kit does not include the stepper motor, motor bracket and instructions, we need to make them ourselves. If you need some installation help, there are video introductions online, and you can seek our technical help at any time.
Rank No. #3
WINSINN Dual Gear Extruder, Ender 3 v2 Upgrade Motor Shaft>20mm, Compatible with Ender 3 Pro CR10 Series 3D Printer TPU Filament Drive Feed
- ✔️【Purchase Note】ONLY for 3D Printers with motor shaft over 20mm, please measure the shaft length before placing order. Due to Creality batches, the original motor shaft of the Ender 3 series printer may not be perfectly fit for our dual gear. You can replace the full size of 42mm high stepper motor if the original motor shaft is too short to Install the gear.
- ✔️【Replacement Kit】Perfect extruder replacement kit for Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 Pro, CR10 S series, Tornado, etc.
- ✔️【Stable And Durable】Upgraded extruder kit made of aluminum alloy material, more stable and durable than the other plastic one while working. Double gear extrusion mechanism, high extrusion force, ensure smooth feeding and gives snappy retractions.
- ✔️【Kindly Reminder】Please calibrate the E-steps from 100 to 139.
- ✔️【Packing List & Warranty】1 x Dual Gear Extruder (This Kit NOT include the stepper motor, motor bracket and instruction manual). 1 Year Warranty. Each product of WINSINN had passed strict QC, If you have any problems when you use the product, just contact us, and we will help you solve it at any time.
Rank No. #4
Zeberoxyz Upgrade Direct Drive Dual Gear Extruder Support Kit with Stepper Motor, Easy Print Filament for Ender-3, Ender 3 Pro,CR-10,CR-10S Extruder Adapter (Dual Gear Extruder Support Kit- Motor)
- Material: Plate is made of high quality cold rolled sheet material
- Function: A direct drive kit with dual gear extruder improves extrusion and retraction
- Filament: More material options,easy to print TPU flexible filament
- Widely Used: for Ender 3 pro CR10 3D printer Upgrade Direct Drive Dual Gear Version Extruder, Tips: Not Suit for Ender3 Max / Ender3 V2 and Ender 5
- Package Content:1PCS dual gear direct extruder support plate with 3pcs pulleys, 1PCS length 60cm motor extension cable(one end is female and the other is male), 1PCS length 100cm motor cable (Both ends are male), 1Kit metal extruder structure, 1PCS stepper motor, 1PCS BL-touch Bracket, 2PCS M3x5mm Screw, 1PCS Open end wrench 8mm to 10mm, 4PCS Allen Key
Rank No. #5
Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers
- Fits: CR-10 / CR-10-S5 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / Ender 3 / Ender 3 Pro
- Nozzle size: .4mm
- Filament size: 1.75mm
- Made in USA by Micro Swiss
Rank No. #6
Sovol Upgrade 3D Printer Kit with All Metal Dual Gear Extruder Feeder, Capricorn Premium XS Bowden Tubing, Pneumatic Couplers & Bed-Level Springs for Ender 3 V2/3/3 Pro/5 CR-10 Series/10S/20/20 Pro
- Compatible Printer Models Include - CR-10/ CR-10S / CR-10S Pro/ CR-6SE/ Ender 3 / Ender 3 pro / Ender 5 / Ender 5 pro/ Ender 6/ Ender-7/ Tornado. INSTALLATION GUIDE: Once the extruder has been installed, manually change the e steps/mm in the Marlin firmware to 139 steps/mm by going to Control>Motion>Steps/mm in the Menu.
- All Metal Dual Gear Extruder - Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together by a dual gear rotating design. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders.
- 100% Original Capricorn XS Series Tubing - Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Fits for 1.75mm Filament.
- Creality die springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends.
- Sovol Customer Service - Any questions you may have about this product, please feel free to contact us on Amazon and we will reply promptly.
Rank No. #7
Micro Swiss Bowden Dual Gear Extruder Compatible with Creality Ender, CR10, CR-10 Pro, CR-10S, CR6-SE, Tornado
- Fits: Bowden extruder machines, Fits NEMA 17 size stepper motors
- Fits: Ender 3, 5, 6, CR10, CR-10s Pro, CR-10S, CR6-SE, Tornado
- Made in USA by Micro Swiss
Rank No. #8
Creality Metal Extruder Ender 3, Ender 3 Metal Extruder, Ender 3 Pro Extruder Upgrade MK8 Drive Feed Bowden Extruders for Ender 3 Series, Creality CR-10 Series, Ender 5 Series
- UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.
- STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
- EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
- ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
- Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence.
Rank No. #9
CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits (with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm) fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5
- Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY
- MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS
- CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
- MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W.
- TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
Rank No. #10
Haldis 3D Dual Gear Extruder, Upgraded Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality Ender 3 CR10 CR-10 Pro CR-10S Tornado (Blue)
- 【DUAL GEAR EXTRUDER】:Double gear extrusion mechanism, high extrusion force, ensure smooth feeding and gives snappy retractions.
- 【STABLE AND DURABLE】:Upgraded extruder kit made of aluminum alloy material, more stable and durable than the other plastic one while working
- 【3D PRINTER EXTRUDER REPLACEMENT KIT】:Perfect extruder replacement kit for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc. Note:comes with all parts,you need to DIY,but it easy to install.
- 【1.75mm FILAMENT ACCEPT】:For 1.75mm Filament.Better pressure pushes the filament into the printer nozzle.
- 【PACKAGE INCLUDES】: 1 x extruder kit;extra 2 stainless steel gears for gift.extruder hotend contains all the necessary screws and parts.
Last update on 2022-11-15 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Cr-10 Dual Extruder Mod?
Do you get stressed out thinking about shopping for a great Cr-10 Dual Extruder Mod? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Cr-10 Dual Extruder Mod, which is why we have assembled a comprehensive list of the greatest Cr-10 Dual Extruder Mod available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Cr-10 Dual Extruder Mod that you consider buying. Your questions might include the following:
- Is it worth buying an Cr-10 Dual Extruder Mod?
- What benefits are there with buying an Cr-10 Dual Extruder Mod?
- What factors deserve consideration when shopping for an effective Cr-10 Dual Extruder Mod?
- Why is it crucial to invest in any Cr-10 Dual Extruder Mod, much less the best one?
- Which Cr-10 Dual Extruder Mod are good in the current market?
- Where can you find information like this about Cr-10 Dual Extruder Mod?
We’re convinced that you likely have far more questions than just these regarding Cr-10 Dual Extruder Mod, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Cr-10 Dual Extruder Mod, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Cr-10 Dual Extruder Mod. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Cr-10 Dual Extruder Mod buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Cr-10 Dual Extruder Mod currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Cr-10 Dual Extruder Mod has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Cr-10 Dual Extruder Mod?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Cr-10 Dual Extruder Mod.
- Customer Ratings: Number ratings grade Cr-10 Dual Extruder Mod objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Cr-10 Dual Extruder Mod.
- Product Quality: You don’t always get what you pay for with an Cr-10 Dual Extruder Mod, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Cr-10 Dual Extruder Mod is should be an indication of how long it will work out for you.
We always remember that maintaining Cr-10 Dual Extruder Mod information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Cr-10 Dual Extruder Mod is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.