The Best Foscam Poe Splitter of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Foscam Poe Splitter of 2022. Check our ranking below.
2,592 (random num) Reviews Scanned
- Support international standard IEEE802.3 af & IEEE802.3at(30W); POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af/at.
- PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module
- Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection
- 12V 2A power output, easy to access Poe network for non-PoE terminal
- 1500V high voltage isolation.
- A Gigabit, Mode A/B Inline PoE Splitter for 12 volt devices like IP Cameras, Media Players, and Speakers. Instantly convert IEEE 802.3af PoE to 12 volts for non-PoE devices. The 5.5mm x 2.1mm barrel fits most 12-volt devices.
- 12v splitter works with 802.3af PoE (Power over Ethernet) to provide 12 watts of continuous 12 volt power. Use with your existing PoE Switch or 48v PoE Injector to power 12 volt non-PoE devices such as outdoor cameras.
- Use with any 802.3af PoE switch like Cisco or Netgear with 10/100 or Gigabit speeds. Compatible with Arduino, Foscam, Wansview, Airsight, EasyN, Escam, Q-See, Apexis, Wanscam and other non-PoE devices. (For the Roku Ultra, see our GAT-12v25w splitter)
- A PoE power splitter that converts and 'splits' 44-56 volts of PoE into 12 volts of power on the DC barrel, along with divided 10/100/1000 Gigabit data on the RJ45 connector. Now you can safely extend DC power up to 328 feet away from a power source.
- All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.
- Allows you to run 1 cable run to the switch for 2 cameras that are near each other, saving on time and material costs. Set consists of a sender "Combiner" unit and a receiver "Splitter" unit. Plug Combiner unit into 2 open ports on your POE switch or POE NVR. Run one long cable to the location that has the cameras that are nearby each other and plug it into the Splitter. Connect 2 short cables to the Splitter unit and connect the other ends to your camera. Done!
- Reduces cabling costs. Let's say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch or NVR, you can now just run 1. Works great for both new and existing installs. Easy and Cost Effective.
- Ever installed a camera in a location, only to find out a few days later that you need another camera right by it? What's worse, the switch is on the other side of the building and it took you hours to run that one long cable run. No worries! Just use this splitter set to make your installation much easier and avoid running another long cable.
- The Splitter Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements. Full IP68 Rating gives this unit the ultimate weather protection and can directly be exposed to rain, sleet, snow, ice, and the sun.
- Simple plug n play installation. Works with all standard 802.3af/at POE switches and POE NVRs that use standard active POE. Works on most all brands POE Switches, Cameras and POE NVRs. Don't be fooled by other cheaper combiners on the market that only work on POE Switches. IPCamPower's Combiner works on all POE Switches, POE NVRs and POE IP Cameras and supports both Mode A and B POE making it the most flexible and compatible POE Combiner/Splitter on the market.
- 802.3af Power over Ethernet PoE Splitter / Converter for 5 volt non-PoE devices. Extend power up to 328 feet away from a PoE switch. Features opto-isolated power to protect your devices.
- 5v 10w PoE splitter compatible with non-PoE Security Cameras, Tablets, Raspberry Pi, Smart Home Devices, Foscam, Dropcam, Sonoff PTZ cam. The 1.35mm x 3.5mm DC barrel fits most devices that use 5 volt power.
- This Power over Ethernet splitter converts and 'splits' 44-56v PoE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit data capability on its RJ45 connector.
- Requires an IEEE 802.3af PoE switch or 802.3af PoE Injector (sold separately). Functions as a PoE splitter for 5v devices while delivering lightning fast gigabit wired speeds on the RJ45 connector.
- All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.
- Network devices at Fast Ethernet speeds all within a compact device.
- Converts non-PoE cameras to Power over Ethernet support.
- Adjustable DIP switch for 5V, 9V, and 12V adjustable output (Compatible with all Wireless Amcrest and Foscam cameras).
- Eliminates the need for a power supply or for a camera to be located near a power outlet.
- Interchangeable tips included.
- Adaptive 10/100Mbps network data transmission: This poe splitter compatible with IEEE802.3-AF/AT transport protocol uses six types of all-copper cables for real-time data transmission without jamming
- Input Power Voltage: Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance DC44-57V from poe switch or poe injector, deliver power up to about 100m (328 feet).The maximum power consumption is 15.4W, and the POE input voltage range is 48V-57V. 5.5x2.1mm DC Plug Cable. DC Jack(Male) output DC voltage is 12V and the maximum output DC current is 1.2A
- Plug-and-Play - Require no configuration: A simple solution to expand your network to where you wish to place network devices but has no power outlet, powerline ethernet adapter
- Easy to install and operate: Any device which connects to a network via an ethernet cable,needs only one cable connection to power and operate if you use PoE.POE makes installation simpler and less expensive, helps to scaling up networks and adding new connections and devices. POE splitter can make non-POE device works via POE.Say goodbye to the wiring annoyance of multiple lines by simply connecting one network cable to transmit data and power at the same time
- Typical application areas include malls, hospitals, companies, parking lots, urban streets, residential buildings, etc. M2C mode sales, the powerful production capacity of background factories, while ensuring capacity and quality, directly give the buyer (consumers), so that the buyer can buy high performance-price ratio products, so that the buyer can buy with confidence
- 802.3af Power over Ethernet PoE Splitter / Converter for 5 volt non-PoE devices. Extend power up to 328 feet away from the power source. Power USB devices via an ethernet cable with gigabit data transfer.
- This Power over Ethernet splitter comes with 2 micro USB to ethernet adapters: a right angle adapter and a left angle adapter to fit in tight spaces and avoid limitations due to device geometry and position.
- 5v 10w PoE splitter compatible with non-PoE Security Cameras, Tablets, Raspberry Pi, Smart Home Devices, Android tablet, Foscam, Dropcam, Sonoff PTZ cam. The 1.35mm x 3.5mm DC barrel fits the adapters.
- Converts and 'splits' 44-56v PoE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit data on its RJ45 connector. Requires an IEEE 802.3af PoE switch or 802.3af PoE Injector (sold separately).
- All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.
- RUN 2 CAMERAS ON 1 CABLE: Connect the RJ45 male connectors (sender) to your PoE switch or NVR, and use a cable to link the combiner's other end to the splitter. Finally, attach your cameras to the RJ45 female connectors (receiver). As simple as that! An efficient and cost-effective solution.
- EASE NEW CAMERA INSTALLATION: Whether you're looking to expand your existing surveillance system or have purchased multiple cameras simultaneously and want to avoid the hassle of additional wiring, Reolink PoE Combiner & Splitter is here to help. It adapts to your various home security requirements without any hassle.
- EFFORTLESS PLUG & PLAY: Designed to seamlessly integrate with Reolink PoE cameras, the RLA-POECS1 ensures a pretty straightforward setup. Just plug it in and play. You can complete the entire process in a matter of minutes, making it simple and convenient.
- WATERPROOF & SUITED FOR OUTDOOR USE & 2-YEAR WARRANTY: Featuring waterproof lids, the RLA-POECS1 is resistant to water, making it ideal for outdoor settings. Additionally, backed by a 2-year warranty, customers can rely on Reolink's top-notch after-sales support for peace of mind.
- WHAT'S INCLUDED: PoE Combiner x1, PoE Splitter x1, Waterproof Lid x3, Installation Guide x1.
- 【DC12V/DC24V/POE 24V Output】Supply hot switchable DC12V or DC24V power to non-POE device; When used with POE 24V adapter (included in package), it can provide POE 24V for 24V POE Device, such as Wireless AP/Bridge. (Noted: only one output at a time)
- 【Gigabit Speed】 Supports 10/100/1000Mbps transmission speed. Max 328ft (100 meters) transmission.
- 【Two DC Terminals】Provides both DC connector and Green terminal (one DC output at a time), max power output is 25W.
- 【Industrial Design】PoE 36V~60V input (max 30W), -40°C~75°C (-40 ℉~167 ℉) working temperature; 6KV lighting protection and level 3 ESD protection; Support Din Rail and Wall mount; Signal and power isolation design to avoid signal interference.
- 【Applications in Harsh Environment】Widely used for security cameras, wireless AP, access control devices, intercom and industrial devices
Last update on 2025-03-19 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Foscam Poe Splitter?
Do you get stressed out thinking about shopping for a great Foscam Poe Splitter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Foscam Poe Splitter, which is why we have assembled a comprehensive list of the greatest Foscam Poe Splitter available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Foscam Poe Splitter that you consider buying. Your questions might include the following:
- Is it worth buying an Foscam Poe Splitter?
- What benefits are there with buying an Foscam Poe Splitter?
- What factors deserve consideration when shopping for an effective Foscam Poe Splitter?
- Why is it crucial to invest in any Foscam Poe Splitter, much less the best one?
- Which Foscam Poe Splitter are good in the current market?
- Where can you find information like this about Foscam Poe Splitter?
We’re convinced that you likely have far more questions than just these regarding Foscam Poe Splitter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Foscam Poe Splitter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Foscam Poe Splitter. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Foscam Poe Splitter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Foscam Poe Splitter currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Foscam Poe Splitter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Foscam Poe Splitter?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Foscam Poe Splitter.
- Customer Ratings: Number ratings grade Foscam Poe Splitter objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Foscam Poe Splitter.
- Product Quality: You don’t always get what you pay for with an Foscam Poe Splitter, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Foscam Poe Splitter is should be an indication of how long it will work out for you.
We always remember that maintaining Foscam Poe Splitter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Foscam Poe Splitter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.