Skip to content

The Best Hydraulic Cabinet Door Lift of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Hydraulic Cabinet Door Lift of 2022. Check our ranking below.

2,204 Reviews Scanned

Rank No. #1
4 Pcs Gas Springs, 100N/22.5LB Gas Struts Lift Supports, Gas Shocks, Soft Close Hinges, Furniture Cabinet Door Lid Stay, Hydraulic Gas Lift Spring Stay for Cabinet, Storage Box Spring Struts
  • Exquisite material: the cabinet door lift up hinge is made of thickened precision steel, which has high pressure resistance, corrosion resistance and rust resistance, is not easy to deform or break, has good sealing effect, strong support, and is durable.
  • Easy to install: Accurate positioning hole spacing, large contact area with the cabinet, more secure installation, and easy installation. One-piece design, stronger bearing capacity, flexible switch, more convenient to use.
  • Practical design: The cabinet gas strut has a full cushioning design, allowing you to easily open the kitchen cabinet door, lift the cabinet door panel, suitable for supporting the lid to keep it open, and it is quiet and soft when closing the cabinet door.
  • Wide application: Suitable for cabinet doors, picture frames, decorative paintings, meter boxes, kitchen cabinet doors, range hoods, etc. Ideal for gas spring, gas strut, gas shocks, lid support, lid stay, etc.
  • 100% Customer Service: Pressure: 100N/22.5lb (per pillar), specific size as shown in the picture. If you encounter any problems or have any suggestions when using our cabinet shocks, please contact us in time, and we will provide you with a satisfactory solution.
Rank No. #2
Berta (4 Pieces) 10 Inch 100N/22 LB Hydraulic Soft Open Gas Springs/Struts for Cabinets, Furniture Cabinet Doors Lift/Lid Stay/Support Hinges for RV Platforms with Brackets and Screws (4 Pieces)
  • PACKAGE CONTENT: 4 Pieces Gas Spring with Brackets and Installation Screws.
  • MAXIMUM LOAD CAPACITY: 100N/22Lbs, MAXIMUM OPENING ANGLE: 90 - 100 Degree.
  • MATERIAL: Made for the shaft, durable and practical. COLOR: Metallic Gray.
  • MAIN FEATURES: Lids soft open gently, Ideal for supporting the lid to keep it open. Silence with cabinet doors close. Suitable for Cabinet, Doors, Box, Container and etc.
Rank No. #3
Gazeer 6 Pcs 100N/22.5lb Gas Struts 10inch Cabinet Struts Cabinet Shocks Cabinet Door Lift Pneumatic Support
  • 【PRODUCT SIZE】Force:100N/22.5lb (Per Strut);Length(ball hole center to ball hole center): 10 inches(As shown in the picture), Package included: 6 X 100N Gas Struts and 30 X Screws ,Installation Manual.
  • 【PRODUCT FEATURES】Round metal mounting plate, contact with the counter area is larger, three-point positioning, installation more solid. Full copper oil seal, full buffer design, solid design to ensure long-term use is not deformed, not rust.
  • 【APPLICABLE SCOPE】Gas Springs are ideal motion control devices for lifting, holding, counter balancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies. Suitable for cupboards, bookcases, wardrobes, windowsill or platform etc,upside support.
  • 【INSTALLATION INSTRUCTIONS 】 Please do not use lubricating oil or similar things.it can interrupt the reaction of the Braking Arm. Please put the fixing plates well-aligned on the stuff. Support opens lids to a maximum angle of 90 degrees.
  • 【KINDLY REMINDER】 This Lift Pneumatic Support is only suitable for PUSH-UP door(As shown in picture ),Not applicable to PULL-DOWN door .If you encounter any installation problems or product quality problems, please contact us in time and We will help you solve the problem and make you satisfied.
SaleRank No. #4
LC LICTOP 6 Pcs Soft Close Lid Support 80N Hydraulic Gas Spring Cabinet Door Safety Lift Support (Black)
  • Package Included:6 X soft close lid support 80 N(black)
  • Lid stay force: 80N (per strut); length: (hole center to hole center): 10.5 inches; pressure: 18 pounds (one pillar)
  • Support to open the cover, the maximum angle is 100 degrees, the contact area with the cabinet is large, three points positioning, the installation is more secure.
  • Cylinder block and connecting rod: The high-strength material piston cylinder body is integrated with the bottom plate connecting rod, the load is larger, and the switch is flexible.
  • Application: Gently cover the lid, ideal for soft closing the lid to prevent slamming, so it won't hurt your child's fingers.Suitable for cabinets, bookcases, wardrobes, window sills or platforms, etc., upper support.
Rank No. #5
Vepagoo 7in 18LB/80N Gas Strut Gas Shock Spring Lid Support for RV Cabinet Door Truck Tool Box Boat Sentry Gun Safe, Set of 2 …
  • 【PRODUCT FEATURE】Help small and light project to open the lid or door slowly and softly, and keep it up.
  • 【PLACEMENT】Which project do these gas shock apply to? Usually used for project with small and light LIDS or doors. Such as wall cabinet, camper cabinets, storage box, toolbox, toy box, etc.
  • 【PARAMETER】 Extended Length (Center-to-Center): 6" (180mm),Compressed Length (Center-to-Center):5.12"(130mm),Force: 18 Lbs/80N Per Strut, two are 36LB/160N.
  • 【PACKAGE CONTENT】Package arrive with 2 shocks,4 mount brackets and 10 screws.
  • 【12+1 MONTH REPLACEMENT SERVICE】Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
Rank No. #6
ARANA Gas Struts 20 inch 45LB Gas Spring Shocks Props with Mounting Bracket, 20" 200N Hydraulic Lift Support Gas Piston for TV Cabinet RV Door Bench Lid Light Window Floor Hatch Storage Box Lid, 2Pcs
  • ✅ARANA Gas Struts 20 inch 45LB - Extended Length A (Center-to-Center):19.7"(500mm), Compressed length B (Center-to-Center): 11.8"(300mm), Force 200N/45Lb Per Strut, 2 Struts Per Pair; Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Instruction.
  • ✅20" Gas Struts for RV Door - ARANA 20 inch gas struts will be suitable for lid weight between 36-50lbs, side length ≥ 32 inch; Note: DO measure the lid weight to avoid buy wrong items.
  • ✅20" Gas Shock Props Brackets - ARANA 20" shocks are designed with L type mounting brackets, all the ball ends and brackets could be unscrewed and rotated to suit for different installation demands.
  • ✅20" Hydraulic Lid Lift - ARANA 20 inch lid hinges lift supports are widely used on bench lid, tralier door, TV cabinet, RV door, floor hatch, trap door, storage box, light window, etc.; as long as the lid weight is between 36-50 pounds.
  • ✅ About installation & support - once you need any installation guide, welcome to message us for in-time help; if there are any product defects, unfit problem or part missing, 18 months replacement support will be provided if let ARANA know.
Rank No. #7
KEILEOHO 10 PCS Hydraulic Support Cabinet Hinge, 100N Soft Close Gas Strut Lift Support Cabinet Hinges with Mounting Hardware for Kitchen, Cupboard
  • PREMIUM MATERIAL - The hydraulic support cabinet hinges are made of a combination of copper, iron and plastic which is durable, sturdy and anti-rust for lasting performance.
  • UNIQUE DESIGN - The cabinet hinges are built with strong support and tight sealing for long-term usage. The head is precisely located to ensure a larger connecting area to cupboard for better stability.
  • EASY TO INSTALL - The toy box hinges are practical and easy to use. Three point positioning with mounting hardware (50 screws) included for easy installation. 10 pieces per package.
  • WIDELY USED - The soft close hinges are widely used for a variety of occasions including kitchen, cupboard, drawer, cabinet, wardrobe, furniture door, bookcase and more.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our door hydraulic hinges, you can return the product and get a refund within 30 days from receiving. Just remember that your satisfaction is our first priority.
SaleRank No. #8
DerBlue 4-Pack 10inch 100N/25lb Gas Struts for Cabinets - Professional Cabinet Shocks and Gas Struts
  • 1️⃣Package Included:4 X Cabinet Door Lift Support;8 X Metal fixing brackets ,20 X Screws ;Installation Manual .If you do not find Screw, please contact us to resend you.
  • 2️⃣Length(hole center to hole center) :10 inch,Support opens lids to a Maximum angle of 100 degrees.
  • 3️⃣Force:100N/22.5lb (Per Strut); Please note: This Lift Pneumatic Support is only suitable for PUSH-UP door(As shown in picture ),Not applicable to PULL-DOWN door.
  • 4️⃣The product comes with a detailed paper installation manual, please read carefully before installing the product.
  • 5️⃣Easy to install, durable and stable. Round metal mounting plate: the contact area of the cabinet body is larger, three point positioning, installation is stronger.suitable for all types of overhead Cabinet,Doors,Box.
Rank No. #9
Gas Spring, Gas Strut, Gas Shocks, Soft Close Hinges, Toy Box Hinges, Lift Supports, Lid Support, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Pressure:120N/26lb/12KG[2 Pack]
  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one for cabinet door width <600mm/23.6in, and two for cabinet door width >600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door.
  • ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is a problem with the product or installation difficulties, please contact customer service as soon as possible to send installation pictures or videos, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return.
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc.
  • ★ Pressure:120N/26lb/12KG (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8". Please select the correct model strictly according to the data sheet of the detailed picture. The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet door.
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right. (Avoid the loss of gas in the cavity) 3.The connection point should be installed flexibly without jamming.
Rank No. #10
4 Pcs 100N/ 22.5lb Gas Strut, Pneumatic Lift, Furniture Cabinet Door Stay, Hydraulic Gas Lift Spring Stay, Cabinet Lift Support, Cabinet Door Strut
  • Size: Force: 100N/ 22.5lb, Extended Length: 270mm(10.6inch); Compressed length: 180mm(7inch); Ball socket to ball socket distance: 245mm(9.6inch)
  • High quality: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years. high strength material piston cylinder body is integrated with floor connecting rod, with stronger load and flexible switch.
  • Protect from noise: easy opening of kitchen cabinet doors,lift up opening cabinet door panels,silence and soft with cabinet doors close.
  • Applicability: Hydraulic support, automatic expansion. Applicable to drawer,Decorative paintings, kitchen cupboard door, cabinet and so on, most cabinets fit.
  • Easy to install: durable and stable. Round metal mounting plate: the contact area of the cabinet body is larger, three point positioning, installation is stronger.

Last update on 2024-06-02 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Hydraulic Cabinet Door Lift?

Do you get stressed out thinking about shopping for a great Hydraulic Cabinet Door Lift? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Hydraulic Cabinet Door Lift, which is why we have assembled a comprehensive list of the greatest Hydraulic Cabinet Door Lift available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Hydraulic Cabinet Door Lift that you consider buying. Your questions might include the following:

  • Is it worth buying an Hydraulic Cabinet Door Lift?
  • What benefits are there with buying an Hydraulic Cabinet Door Lift?
  • What factors deserve consideration when shopping for an effective Hydraulic Cabinet Door Lift?
  • Why is it crucial to invest in any Hydraulic Cabinet Door Lift, much less the best one?
  • Which Hydraulic Cabinet Door Lift are good in the current market?
  • Where can you find information like this about Hydraulic Cabinet Door Lift?

We’re convinced that you likely have far more questions than just these regarding Hydraulic Cabinet Door Lift, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Hydraulic Cabinet Door Lift, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Hydraulic Cabinet Door Lift. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Hydraulic Cabinet Door Lift buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Hydraulic Cabinet Door Lift currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Hydraulic Cabinet Door Lift has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Hydraulic Cabinet Door Lift?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Hydraulic Cabinet Door Lift.
  5. Customer Ratings: Number ratings grade Hydraulic Cabinet Door Lift objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Hydraulic Cabinet Door Lift.
  7. Product Quality: You don’t always get what you pay for with an Hydraulic Cabinet Door Lift, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Hydraulic Cabinet Door Lift is should be an indication of how long it will work out for you.

We always remember that maintaining Hydraulic Cabinet Door Lift information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Hydraulic Cabinet Door Lift is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: