The Best Joystick Pot of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Joystick Pot of 2022. Check our ranking below.
2,445 Reviews Scanned
Rank No. #1
JAO Automation True OEM Quality Joystick Analog Stick Replacement (2-Pack) Compatible with Xbox One, X, S, Elite, PS4, Switch Pro Controllers w/ 10k pots (not for 360 or PS3) High Precision Accurate
- TRUE OEM QUALITY joystick replacement for Xbox One, X, PS4, Switch Pro and Shield controllers w/ 10k pots (not for 2k pot controllers, please measure)
- Smooth linear taper on joystick sensors, no sudden transitions, quality controlled to 5% tolerance
- Smooth 360 degree action, no binding in corners, clean return to center
- Crisp toggle press switch with good tactile feedback.
- I have serviced many controllers over a decade, these are the most accurate and reliable replacements available.
Rank No. #2
IKPEK 20pcs 2K3 Ohm Potentiometer Replacement for Dualsense PS5 Controller, Trim Pot Resistor Thumbstick Module Sensor for ALPS Analog Joystick
- Compatibility -- 2K3 Ohm Potentiometer Compatible with PS5 Controller Only (NOT FIT for PS4 Xbox One Xbox One S/X Controller).
- Solve Most Joystick Problem -- Stick drift, stuttering, dead zones, creeping, blind spots, non centered.
- INSTALL -- This product will require moderate soldering to install.
- Package Included -- 20 x 2K3 Ohm Potentiometer, 1 x Cross Screwdriver, 1 x Tweezer, 1 x Pry tools, 1 x Pry bar.
- Customer Service & Warranty -- We provide 3 months warranty for replacement Potentiometer. If you have any problem about the product, please feel free to contact us, we will reply you with 24 hours.
Rank No. #3
ElecGear 8X FU 2.3K Replacement Potentiometer + Drift Fix PCB for PS5 DualSense Wireless Controller, Trim Pot Resistor Thumbstick Module Sensor for Favor Union Analog Joystick
- [FU 2.3KΩ Potentiometer] – The replacement variable resistor was made by Favor Union (FU). It fits analog joysticks made by FU. This 2.3K ohm version was found in some PS5 DualSense controllers
- [Compatibility] – FU sensors come in two different resistance values. This 2.3K version was printed 2K3. Make sure the value is around 2.3KΩ before ordering. (Be noticed: Choose 10KΩ version for some PS3, PS4, Nintendo Switch, Hori, PDP, BDA (Power A) controllers if you found FU joysticks inside. The potentiometer in orange made by FU is not compatible with joysticks made by ALPS, while 60% of PS5 controllers use ALPS joysticks.)
- [Additional Drift Fix PCB] – Several factors cause joystick drifting a common issue. Even new joysticks can drift. The potentiometer was born without precision. Wear to the carbon film, spring fatigue and material stretching made it not centered. Dust, moisture and drop make it worse. We packed PCB to fix the problem of drifting in one direction. Simply adjust the variable resistor to eliminate the drifting
- [For most joystick problem] – The potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone, or it wouldn't center after years of wear and tear. De-soldering the unit with only 3Pins will be a lot easier than replacing the entire joystick with as many as 14 prongs
- [Reminder of Replacement] – Use a pair of pliers to separate the problem sensor off the joystick module. Try to replace the wiper first, see if it works. De-solder the sensor off the PCB. A metal pick helps to clear the holes. Soldering the new unit in is a breeze. Remember to calibrate the new control sticks in settings
Rank No. #4
Acxico 1Pcs Joystick Potentiometer JH-D202X-R2/R4 5K 10K ohm 2-axis Sealed PTZ Thermistor
- Resditance Value: Standard 5KΩ
- R300Z Axis Potentiometer, R400Z Axis Potentiometer And Button Switch Lead: AWG28 Color Coded, Silver Plated, PTFE inslatedlead wires standard length 100mm other lengths on request.
- Insulation Resistance: 50MΩ @ 500VDC, 60 sec.
- Package Included:1Pcs Joystick Potentiometer JH-D202X-R2/R4 5K 10K ohm 2-axis Sealed PTZ Thermistor(If there are any problems with the product, please send us pictures.Tell us more details about this problem.)
- Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.
Rank No. #5
Onyehn 15pcs/Set 2k3 Ohm Potentiometer Replacement for Dualsense PS5 Controller,Repair Part Trim Pot Resistor Module Sensor for ALPS Analog Joystick
- Required Ability:Needs moderate soldering. Instruction is not included, but it is not complicated.
- What this fixes: Stick drift, blind spots, creeping, stuttering, dead zones, non centered joysticks.
- How to use:Take out the board separately, pry open the potentiometer on the side of the joystick, and replace it with a new one.
- Package include:15*2k3 Ohm 3 Pins Trimmer Potentiometer Sensor for PS5
- Instructions are not included.Please Replace This Part Under Professional Guide, If Not, NO TRY
Rank No. #6
EEEKit 20pcs Replacement Trimmer Potentiometer Sensor for PS4 Controllers, 10k Ohm Trim-Pot Gasket Repair Parts for Xbox One PS3 PS4 Switch Pro Thumb Stick Analog Joystick
- COMPATIBILITY: Our replacement potentiometer sensor is compatible with Xbox One, PS3, PS4, and Switch Pro, restoring accurate and responsive control for gaming enthusiasts. It comes in a 10k Ohm resistance value. Please make sure of the value before ordering.
- WHY YOU NEED IT: When your controller has problems with creep, jams, blind spots, dead spots, and dead zones, it means the trim potentiometer sensor of your controller needs to be replaced.
- COST-EFFECTIVE: Save money by purchasing our replacement sensor instead of buying a new controller, offering a cost-effective solution to extend the lifespan of your gaming gear.
- EASY DIY REPAIR: Just take out the board and open the potentiometer of the joystick, then replace it with a new one. With our trimmer potentiometer sensor replacement parts, you can easily perform the repair yourself, avoiding the hassle of sending your controller for professional servicing.
- PACKAGE INCLUDED: 20 x replacement trimmer potentiometer sensor. Enjoy precise and reliable control with a new trimmer potentiometer sensor, eliminating inaccuracies and enhancing your overall gaming experience.
Rank No. #7
12Pcs Trimmer Potentiometer Sensor Replacement for Xbox One,PS3,PS4 Switch Pro Controllers,Trim Pot Resistors Repair Parts for Thumb Stick Analog Joystick
- Useful:The 3Pin trimmer potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone or wouldn't center after years of wear and tear.Soldering the unit with only 3 prongs will be much more easier than replacing the 14Pin joystick assembly.
- Used for:The trim pot resistor is OEM repair parts, the same model as the one in your controller. The genuine replacement sensor is to ensure accuracy and prolong lifespan. replacement for the wireless controllers below: PS3; PS4 DualShock4 series (PS4, PS4 Slim, PS4 Pro); Xbox One series (Xbox One, One S, One X and Elite); Nintendo Switch Pro controller.
- Note:Make sure you have basic soldering skills and some soldering supplies like an electronics solder iron and small gauge solder. Use a pair of pliers to separate the problem sensor off the thumbstick component. A metal pick helps to clear the holes in the PCB. Re-soldering the new unit in is a breeze. Just remember to use flux and keep the iron's tip well tinned.
- Package include: 12Pcs potentiometer sensor modules for games controller joystick.
Rank No. #8
40pcs Trimmer Potentiometer Sensor Replacement Trim-Pot Gasket Thumb Stick Analog Joystick Repair Parts (Compatible for PS5, 2.3k Ohm)
- Compatible with PS5.
- The resistance value is 2.3k ohms.
- Used to repair damaged game controllers.
- To remove the circuit board, open the potentiometer on the game controller and replace the old sensor directly.
- 1 package 40X, without instruction manual, please confirm the required model before purchasing.
Rank No. #9
Penny & Giles JC100-002-5K Pot, Joystick, 4KOHM, 28°, 250mW
- Price For: Each Contact Configuration: (Not Available) No. of Axes: 1 Track Resistance: 5kohm Supply Voltage Max: 35V Power Rating: 250mW Rotation Electrical Angle: 28° Switch Terminals: Connector Resistance: 4kohm RoHS Compliant: Yes
Rank No. #10
Create idea 8Pcs 3-Pin Joystick Trimmer Pot Replacement Pockets Compatible with PS4 Controllers Trimmer Potentiometer Sensors 10K Ohms
- COMPATIBILITY : Compatible with PS4 controllers only; Great controller replacement and gasket repair parts for thumbstick analog joysticks.
- EASY INSTALLATION : These trimmer potentiometer sensors are very easy to install. All you need is an electronics soldering iron and small gauge solder and you can complete the potentiometer replacement. Remember to clean the old holes before re-soldering the new trimpot sensor.
- Potentiometer parameters : 10K ohms. Trimmer potentiometers have 3-pin connectors. The unit can be desoldered using only 3 pins, much easier than replacing the 14 pin joystick assembly.
- Note : 1. We cannot guarantee its compatibility with other controllers. Check the size and make sure it is around 10K ohms; 2. Solve the problem caused by only 3 Pin sensor. Please confirm this before ordering.
- PERFECT REPLACEMENT : Good replacement for damaged or non-working 3d joystick axis analog sensor modules.
Last update on 2024-05-22 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Joystick Pot?
Do you get stressed out thinking about shopping for a great Joystick Pot? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Joystick Pot, which is why we have assembled a comprehensive list of the greatest Joystick Pot available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Joystick Pot that you consider buying. Your questions might include the following:
- Is it worth buying an Joystick Pot?
- What benefits are there with buying an Joystick Pot?
- What factors deserve consideration when shopping for an effective Joystick Pot?
- Why is it crucial to invest in any Joystick Pot, much less the best one?
- Which Joystick Pot are good in the current market?
- Where can you find information like this about Joystick Pot?
We’re convinced that you likely have far more questions than just these regarding Joystick Pot, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Joystick Pot, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Joystick Pot. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Joystick Pot buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Joystick Pot currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Joystick Pot has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Joystick Pot?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Joystick Pot.
- Customer Ratings: Number ratings grade Joystick Pot objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Joystick Pot.
- Product Quality: You don’t always get what you pay for with an Joystick Pot, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Joystick Pot is should be an indication of how long it will work out for you.
We always remember that maintaining Joystick Pot information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Joystick Pot is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.