The Best Jumbospot Mmdvm of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Jumbospot Mmdvm of 2022. Check our ranking below.
2,645 (random num) Reviews Scanned
- MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions)
- Aursinc mmdvm hat supports Raspberry Pi 4, 3B, 3B +, Pi Zero W, Pi Zero 2W, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model). Great way to roll your own hotspot. Added a Pi Zero 2W, power supply, microSD, and loaded with WPSD. You will have a great simple hotspot, great way to help learn about DMR
- Firmware Update: If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat(How to Update MMDVM_HS for WPSD 1.6.1: jumbo5566.github.io)
- [Multifunction] Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules
- When connecting the MMDVM board to a RPi 4, please note: If it works normally, no additional settings are required. If the SVC indicator does not flash, choose one of these methods (refer to the product diagram): 1. Remove the R1 resistor on the hotspot board. 2. Cut off the 2 RPi pin headers on the corners of the board
- [Frequency Range] MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions)
- [Multifunction] Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules
- [Applicability] AURSINC hotspot board supports Raspberry Pi 4, 3B, 3B +, Pi Zero W, Pi Zero 2W, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model). if you want a little processor power install on Pi 3 or Pi4, this is a great little hat for digital voice modes
- When connecting the MMDVM board to a RPi 4, please note: If it works normally, no additional settings are required. If the SVC indicator does not flash, choose one of these methods (refer to the product diagram): 1. Remove the R1 resistor on the hotspot board. 2. Cut off the 2 RPi pin headers on the corners of the board
- [Firmware Update] If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat. More info pls view: amateurradionotes.com/pi-star-notes.htm#hotspotfwupdate. How to Update MMDVM_HS for WPSD 1.6.1: jumbo5566.github.io
- [Extensive Compatibility] Supports DMR, P-25, D-Star and System Fusion. HIGH PERFORMACE: 32-bit ARM processor, up to 10mW RF power, fully tested every piece. Compatible with the Raspberry Pi, including the Pi 1, 2/2b, 3/3b/3b+, 4/4b, Pi Zero, Pi Zero 2W
- [Easy to Assemble] The firmware is pre-loaded and is easily upgraded via software. Onboard LEDs showing status (Tx, Rx, PTT, Mode). Pi-star control Mode selection: DUPLEX Mode/SIMPLE Mode
- [Frequency Range] UHF 433-900MHz, VHF144-146MHz. (144-148, 219-225, 420-475 Main band, 842-950) It's best to work on the amateur band: 430-440 MHz. NOTE: TX=0, RX=0. To leave the screen on all the time In Pi-Star configuration, ensure you have "OLED Type 3" in the display type field at the top of the page, set Port to: modem
- [Setting] Modify the modem type (any model ending in GPIO can be supported). Radio/Modem Type: STM32-DVM/MMDVM_HS-Raspberry pi Hat(GPIO). In the Expert section, go to MMDVM host, and scroll down to the OLED section. Make sure LogoScreensaver is set to "1", this leaves the screen on all the time. Otherwise, it goes blank when idle
- [Update New FW] (pi-star / expert / ssh access / user: pi-star pass: raspberry) You can directly run upgrade commands without the need to set jumpers (run in the Pi star terminal): sudo pistar-mmdvmhshatflash hs_dual_hat (if this command doesn't work, please try this command: mmdvm.club/index.php/wpsd .html)
- [EASY SET UP] Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440) This is upgraded version, do not need to set RXOFFSET and TXOFFSET, they're default 0. Note: when you flash the TF card with new version software, please DO NOT copy on the TF card directly, use a write in tool to write the software on TF card
- [EASY CHARGING] Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in your vehicle if you tether it to your mobile phone network
- Firmware V1.5.2, the MMDVM hotspot board supports updating to V1.6.1 (How to Update MMDVM_HS for WPSD 1.6.1: jumbo5566 .github.io). To speed up the operation, it is recommended to switch to an optimized system:https:// w0chp.radio/ wpsd/
- SUPPORT: C4FM YSF NXDN DSTAR P25 DMR and default work with UHF. Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series. Our test is in DMR mode, if you want to change the working mode, you need to configure it as needed Working mode parameters
- [WIFI SSID] Need the 2.4GHz SSID as Pi Zero W doesn't support 5.8GHz. Ensure WiFi Password Type is WPA, not WEP. Power on hotspot for 2 minutes to auto-connect or follow instructions to connect the Hotspot to your router. After power on 2 minutes, go to pi-star /admin/ configure.php
- This is case kit. Assembly is required. No components are included.
- Full body coverage for Raspberry Pi, JumboSPOT or LoneStar MMDVM Simplex and OLED screen (not waterproof). Note: Raspberry Pi Zero 2 has not been tested for heat issues. Enough room for .96″ OLED screen to be mounted directly to JumboSPOT or LoneStar MMDVM Simplex by customer
- Cut outs for easy access to SD card and camera ports
- Comes with 2 tops: one with antenna hole and one without
- Pin-hole access to boot and reset buttons on top of case
- MMDVM hotspot supports D-STAR DMR YSF P25 NXDN POCSAG, enables the different mode of digital two way radio to communicate with each other (YSF2DMR / YSF2NXDN / YSF2P25 / DMR2YSF / DMR2NXDN) and works great in UHF.
- HOTSPOT size: 2.8 x 1.3 x 0.9” inch
- Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ. DMR WIFI SSID:pi-star,PASSWORD:raspbery. Need the 2.4GHz SSID as the Pi Zero W. doesn't support 5.8GHz
- Power Supply: Mobile charger or a USB cable connected to your computer or laptop..
- Best customer services: fully-assembled. The firmware is pre-loaded. Contact us if any question, we will reply within 6 hours. 73.
- [Frequency Range] MMDVM hotspot board is the latest firmware. Supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions)
- [Compatible] Hotspot board support Raspberry Pi 4, 3B, 3B +, Pi Zero W, Pi Zero 2W, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USB to TTL or Bluetooth model). If you want a little processor power install on Pi 3 or Pi4, this is a great little hat for digital voice modes.
- [Support MMDVM Mode] MMDVM board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG
- [Features] Support online upgrade, user-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules. It can be update the MMDVM firmware version to V1.6.1 (How to Update MMDVM_HS for WPSD 1.6.1: jumbo5566.github.io)
- When connecting the MMDVM board to a RPi 4, please note: If it works normally, no additional settings are required. If the SVC indicator does not flash, choose one of these methods (refer to the product diagram): 1. Remove the R1 resistor on the hotspot board. 2. Cut off the 2 RPi pin headers on the corners of the board
- If you have a Zumspot Brand MMDVM Board there is a new case model: ZRPI-3.5NSX
- For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), JUMBOspot (a generic Chinese MMDVM board - Not included), and a 3.5″ Enhanced Nextion Touchscreen (included). Carefully designed to precisely fit these components using Laser cut components and stainless steel hardware. Full body coverage for components (not waterproof). Heat sinks and rubber feet included.
- Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions.
- Note: This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended periods as performance problems can arise at higher temperatures.* The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included)
- Engineered and manufactured with Pride in Tacoma, WA USA
- [EASY SET UP] Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440,VHF:144-146) This is upgraded version, do not need to set RXOFFSET and TXOFFSET, they're default 0
- [EASY CHARGING] Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in your vehicle if you tether it to your mobile phone network
- To speed up the operation, it is recommended to switch to an optimized system:https:// w0chp.radio/ wpsd/. Firmware V1.5.2, the MMDVM hotspot board supports updating to V1.6.1 (How to Update MMDVM_HS for WPSD 1.6.1: jumbo5566 .github.io)
- SUPPORT: C4FM YSF NXDN DSTAR P25 DMR and default work with UHF. Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series. Our test is in DMR mode, if you want to change the working mode, you need to configure it as needed Working mode parameters
- [WIFI SSID] Need the 2.4GHz SSID as Pi Zero W doesn't support 5.8GHz. Ensure WiFi Password Type is WPA, not WEP. Power on hotspot for 2 minutes to auto-connect or follow instructions to connect the Hotspot to your router. After power on 2 minutes, go to pi-star /admin/ configure.php
- Buchs, Sammie (Author)
- English (Publication Language)
- 36 Pages - 12/15/2021 (Publication Date) - Independently published (Publisher)
Last update on 2025-04-16 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Jumbospot Mmdvm?
Do you get stressed out thinking about shopping for a great Jumbospot Mmdvm? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Jumbospot Mmdvm, which is why we have assembled a comprehensive list of the greatest Jumbospot Mmdvm available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Jumbospot Mmdvm that you consider buying. Your questions might include the following:
- Is it worth buying an Jumbospot Mmdvm?
- What benefits are there with buying an Jumbospot Mmdvm?
- What factors deserve consideration when shopping for an effective Jumbospot Mmdvm?
- Why is it crucial to invest in any Jumbospot Mmdvm, much less the best one?
- Which Jumbospot Mmdvm are good in the current market?
- Where can you find information like this about Jumbospot Mmdvm?
We’re convinced that you likely have far more questions than just these regarding Jumbospot Mmdvm, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Jumbospot Mmdvm, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Jumbospot Mmdvm. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Jumbospot Mmdvm buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Jumbospot Mmdvm currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Jumbospot Mmdvm has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Jumbospot Mmdvm?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Jumbospot Mmdvm.
- Customer Ratings: Number ratings grade Jumbospot Mmdvm objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Jumbospot Mmdvm.
- Product Quality: You don’t always get what you pay for with an Jumbospot Mmdvm, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Jumbospot Mmdvm is should be an indication of how long it will work out for you.
We always remember that maintaining Jumbospot Mmdvm information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Jumbospot Mmdvm is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.