Skip to content

The Best low profile subwoofer of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best low profile subwoofer of 2022. Check our ranking below.

2,176 Reviews Scanned

Rank No. #1
Rockville RW10CA 10" 800 Watt Slim Low Profile Active Powered Car Subwoofer Sub, Black
  • Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.Waterproof : No
  • 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
  • Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
  • Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
  • Thermal Protection Circuit, Short Protection Circuit.
Rank No. #2
BOSS Audio Systems BAB10 Amplified Car Subwoofer - 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
  • BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer
  • PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Rank No. #3
BOSS Audio Systems BASS10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space, Remote Subwoofer Control
  • Space Saver - If you are tight on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options
  • Pulse Width Modulated - PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Rank No. #4
Monoprice - 135847 Ssw-12 Powered Slim Subwoofer - 12 Inch - Black with Ported Design, 150 Watts, Lowprofile Includes On-Wall Mounting Brackets
  • Slim, low profile: the Monoprice ssw-12 features a ported cabinet that's designed to deliver ample bass output from a slim, low profile enclosure. You can slide it 7.0" Under your favorite chair or sofa, place it behind your TV stand, or even mount it on your living room wall.
  • 12" Ported design: the ssw-12 features a full-sized 12" Woofer housed in a ported, bass-reflex enclosure that is designed to maximize bass output from its slim, low profile design. With a frequency response that extends down to 20Hz, you won't have to skimp on the bass.
  • Powerful amplifier: the ssw-12 is outfitted with a 150-watt amplifier signed specifically for subwoofers. It features the ability to set volume, low pass filter, and is equipped with both line level RCA jacks and speaker level terminal inputs.
  • Service & support: Contact our technical support team for questions about our products, troubleshooting, or even Suggestions for products to fit your particular needs.
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices.
SaleRank No. #5
BLAUPUNKT Blue Magic XLf 200 A 300-Watt 8-Inch Low Profile Active Subwoofer System
  • 8-Inch Low Profile Preloaded Active Subwoofer System
  • 300 Watts Peak Power, 150 Watts Rated Power
  • Spun Paper Cone
  • Amplifier: Class D, Variable Low Pass Filter: 50-150Hz, Inputs: RCA and High Level
  • Sensitivity: 92dB
Rank No. #6
Rockville USS8 8" 600w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, Black
  • Rockville USS8 8" 600w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. 600 Watts Peak / 150 Watts RMS. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input..Impedance: 3 ohm.Speaker size:8 inches
  • High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Green Power/Red Protect LED.
  • Phase Switch: 0 Degree or 180 Degree. Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB at 45Hz. Subsonic Filter: 20Hz - 50Hz. THD < 0.15%. Subwoofer Level Remote Control. Fuse Rating: Single 20A.
  • Specifications: Maximum Power RMS: 150 Watts. Impedance: 3 Ohm. Dimensions: 13.6 x 9.9 x 2.9 (L x W X H) Inches. Frequency Response: 15Hz - 125Hz.
  • Signal to Noise Ratio >82dB. Sensitivity: 90dB at 1w / 1m. Input sensitivity, RCA level 195mV. Input sensitivity, HIGH level 5.6V.
Rank No. #7
KICKER 46TL7T102 TL7T 10" (25cm) Solo-Baric Subwoofer in Thin Profile Enclosure, 2-Ohm, 500 Watt
  • Peak Power Handling: 1000W
  • RMS Power Handling: 500W
  • Final Impedance: 2 ohms
  • Sensitivity (dB 1w/1m) - 85.98
  • Frequency Response (Hz) - 25-100
Rank No. #8
Sound Storm Laboratories LOPRO8 Powered Under Seat Car Subwoofer - 600 Watts Max, Single 2.6 Ohm, Voice Coil, Built in Amp, Low Profile, Remote Subwoofer Control
  • BUILT-IN AMPLIFIER: With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
  • VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
Rank No. #9
Infinity REF1000S 10-9/16" Shallow Mount Subwoofer
  • Low-profile design
  • Harman-proprietary SSI (Selectable Smart Impedance), 2 ohm or 4 ohm, switch selectable
  • 89dB Sensitivity
  • OEM-level reliability testing
  • Frequency response 35Hz - 175Hz
Rank No. #10
Dayton Audio LS10-44 10" Low Profile Subwoofer Dual 4 Ohm
  • Innovative low-profile subwoofer - less than 3.4" thick!
  • 10 mm Xmax guarantees uncompromised bass performance
  • Dual 4 ohm voice coils, 6 layers total, for high BL force and multiple wiring options
  • Rigid flat honeycomb fiberglass cone maintains linearity and high impact
  • Low distortion ferrite motor with dual aluminum shorting rings

Last update on 2022-10-18 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best low profile subwoofer?

Do you get stressed out thinking about shopping for a great low profile subwoofer? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching low profile subwoofer, which is why we have assembled a comprehensive list of the greatest low profile subwoofer available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for low profile subwoofer that you consider buying. Your questions might include the following:

  • Is it worth buying an low profile subwoofer?
  • What benefits are there with buying an low profile subwoofer?
  • What factors deserve consideration when shopping for an effective low profile subwoofer?
  • Why is it crucial to invest in any low profile subwoofer, much less the best one?
  • Which low profile subwoofer are good in the current market?
  • Where can you find information like this about low profile subwoofer?

We’re convinced that you likely have far more questions than just these regarding low profile subwoofer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for low profile subwoofer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible low profile subwoofer. Make sure that you are only using trustworthy and credible websites and sources.

We provide an low profile subwoofer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available low profile subwoofer currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of low profile subwoofer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an low profile subwoofer?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your low profile subwoofer.
  5. Customer Ratings: Number ratings grade low profile subwoofer objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their low profile subwoofer.
  7. Product Quality: You don’t always get what you pay for with an low profile subwoofer, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an low profile subwoofer is should be an indication of how long it will work out for you.

We always remember that maintaining low profile subwoofer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding low profile subwoofer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: