The Best Mono Sub Amp of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Mono Sub Amp of 2022. Check our ranking below.
2,771 (random num) Reviews Scanned
Rank No. #1
Nobsound G2 PRO TPA3255 Hi-Fi 300W Subwoofer Power Amplifier Mono Channel Class D SUB Audio Amp
- With PBTL/SUB switch: convenient to use G2 PRO as full frequency amp or subwoofer amp, a SUB output is specially designed for active subwoofer. G2 PRO can connect to both passive and active subwoofers. And two G2 PRO can be used to drive left and right channel independently to avoid mutual interference.
- Max 300W output power: using TPA3255D2 amp chip and equipped with 32V/5A large power supply, enough to drive 320W passive speakers or subwoofers. It also has a good match with outdoor/ bookshelf/ computer/ desktop /ceiling /floor standing speakers.
- Best design and HiFi sound: with a gain switch to allow 2-level of output level setting (32/36 dB) and SUB frequency adjustment (40-300Hz). It also has built-in speaker protection circuit, low-pass filter to guarantee no audible noise even at high power output, SUB signal and amp can output at the same time to bring HiFi listening experience.
- Mini size with exquisite appearance: mono integrated class D amplifier, simple compact design but with powerful function, more fashionable and durable solid aluminum chassis, very suitable for HiFi home and desktop audio system use.
SaleRank No. #2
BOSS Audio Systems R1100M Monoblock Car Amplifier - 1100 High Output, 2-8 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, MOSFET Power Supply
- Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
Rank No. #3
Fosi Audio M04 Subwoofer Amplifier for Home Theater Mono Channel Digital Class D Integrated Power Amp for Passive Speakers Subwoofer
- The Fosi Audio M04 is a mono amplifier designed for driving passive subwoofers or speakers. It features the Texas Instruments TPA3116 chip and NE5532 op-amp, providing an output power of 100 watts for a 2-ohm subwoofer or speaker
- The M04 SUB amp is designed to improve the bass response of passive subwoofers. It features a selector switch that allows the user to switch between subwoofer bass amplifier and full-frequency mono amplifier modes
- The mono amplifier home audio has a small and robust design with a built-in low pass filter for subwoofers and a sub frequency control, making it practical and powerful. It uses highly efficient Class D technology that remains cool under demanding loads and doesn't take up much space
- The mini subwoofer amplifier can produce a deep, crisp, and clean low-frequency sound effect, making it an excellent addition to dedicated home theaters. It has been designed to enhance the sound and performance of your audio system at an affordable price
- What You Get: M04 subwoofer amp x1, 19V/4.74A power supply x1, user manual x1
Rank No. #4
ALPINE S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Class-D+Bass Knob
- (1) Alpine S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D. (1) Alpine RUX-KNOB.2 Remote Control Bass Knob For Select Alpine Amplifiers Amps. Specifications:
- Alpines Class D Amplifier Circuit. CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V 1% THD+N); 600W RMS x 1 (2ohm, 14.4V 1% THD+N)
- S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm). THD+N 0.03% (ref 1W info 4 ohm). Frequency Response: 10Hz-400Hz (+/-3 dB). Damping Factor: > 1000
- Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
Rank No. #5
Blaupunkt 1500W 1-Channel, Monoblock Amplifier
- 1500W Maximum Power Monoblock Amplifier
- Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- Compactly built so this amplifier can fit perfectly into any trunk
Rank No. #6
Fosi Audio M03 200 Watt TPA3255 Subwoofer Amplifier Mini Mono Channel Audio Power Amp for Home Theater Full-Frequency and SUB Bass Switchable with 32V/5A Power Supply
- Subwoofer Amplifier and Full-Frequency Mono Amp：Switch to PBTL, M03 is a Full-Frequency Mono amp for driving passive speakers and powered subwoofer. Switch to SUB, M03 is a subwoofer amplifier for diving passive and powered subwoofers
- M03 adopts the Texas Instruments TPA3255D2 chip that features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath Ultra-HD). This technology allows ultra low distortion across the audio band and superior audio quality
- High Efficient Power Output up to 200Watt. M03 can provide 150 watts RMS into 4-ohm loads or 120watts to 8-ohm loads. (Note: Package comes with 32V/5A power supply, you need a more powerful power supply to get the MAX power output
- Home Hi-Fi Amplifier with Clean Sound Quality. Built-in low pass filter for 20-300Hz subwoofers with SUB frequency control. Great amplifier to driver any bookshelf speaker or subwoofer
- What You Get: M03 amp x1, 32V/5A power adapter x1, user manual x1
Rank No. #7
Skar Audio RP-350.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 350W
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
- Stable at 1 ohm | Remote Subwoofer Level Control Included
Rank No. #8
Nobsound G2 Subwoofer Power Amplifier Mini Mono SUB Amp 100W PBTL BTL Bridge Home Theater
- G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
- Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
- It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
- It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
- Prompt and courteous customer service. For any questions you have, please feel free to contact us on Amazon.
SaleRank No. #9
Kicker 46CXA4001 CXA4001-400-Watt Mono Class D Subwoofer Amp
- CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!
- A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.
- Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!
- CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!
- These powerful amps work with as little as nine volts of power from your battery, and as much as 40 volts (400 watts) of speaker-level input signal.
Rank No. #10
AIYIMA A3001 Mini Stereo Amp 300W Subwoofer Amplifier TPA3255 Class D Mono Amp with Full-Frequency & Sub Bass Home Audio Speaker amp+ DC36V 6A Power Adapter
- ❶ Adopt The Instruments TPA3255D2 chip, NE5532 op-amp. Very Quiet, Runs Extremely Cool,Easy to set up,Ship With 36V 6A power adapter,so our AIYIMA A3001 Subwoofer Amplifier can driver most home passive speakers and powered subwoofers
- ❷ This A3001 TPA3255 HiFi Mono class D amplifier,the Max output 300W, Exclusively designed for the customers who pursue HiFi sound,High efficient power output to 200 watts RMS into 2-ohm loads, 150 watts RMS into 4-ohm loads or 120watts to 8-ohm loads
- ❸ Built-in low pass filter for Subwoofers With Full-Frequency and Sub Bass Switchable,Can be switched to subwoofer bass or full frequency mono amp, Can be connected to passive suboower,active subwoofer or passive speaker
- ❹ Add full-range mono amp & Subwoofer amplifier switchable switches to adjust the input ways according to your different needs
- ❺ Simple compact design,And the exterior design is delicate and beautiful little amp,It can match with your computer/ desktop /Home theatre system and so on
Last update on 2023-12-04 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Mono Sub Amp?
Do you get stressed out thinking about shopping for a great Mono Sub Amp? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Mono Sub Amp, which is why we have assembled a comprehensive list of the greatest Mono Sub Amp available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Mono Sub Amp that you consider buying. Your questions might include the following:
- Is it worth buying an Mono Sub Amp?
- What benefits are there with buying an Mono Sub Amp?
- What factors deserve consideration when shopping for an effective Mono Sub Amp?
- Why is it crucial to invest in any Mono Sub Amp, much less the best one?
- Which Mono Sub Amp are good in the current market?
- Where can you find information like this about Mono Sub Amp?
We’re convinced that you likely have far more questions than just these regarding Mono Sub Amp, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Mono Sub Amp, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Mono Sub Amp. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Mono Sub Amp buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Mono Sub Amp currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Mono Sub Amp has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Mono Sub Amp?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Mono Sub Amp.
- Customer Ratings: Number ratings grade Mono Sub Amp objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Mono Sub Amp.
- Product Quality: You don’t always get what you pay for with an Mono Sub Amp, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Mono Sub Amp is should be an indication of how long it will work out for you.
We always remember that maintaining Mono Sub Amp information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Mono Sub Amp is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.