The Best Motorcycle Cup Holder of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Motorcycle Cup Holder of 2022. Check our ranking below.
2,965 Reviews Scanned
Rank No. #1
FODSPORTS Motorcycle ATV Cup Holder, Upgraded Motorcycle Drink Holder with 0.5-1.57" Metal Clamp, Universal Water Bottle Holder for Bike Scooter Boat Stroller Golf Push Cart Wheelchair Tractor
- 【Compatible with Different Cup Sizes】FODSPORTS motorcycle drink holder is compatible with cups up to 3.6 inch in diameter, you can easily adjust it by the knob on the bottom of the cup holder to fit different cup sizes, the adjustment range is: 2.08''-3.6''. Suitable for such as water bottles, coffee mugs, beer bottles, sports cups, and more, and it is also Bluetooth compatible.
- 【Heavy Duty Metal Clip & Quality Material】FODSPORTS motorcycle cup holder is made up of aluminum alloy and high quality TPE material, it's solid, durable and long-lasting. Heavy duty aluminum alloy metal clip design with built-in rubber anti-slip pads for a stronger grip while avoiding scratching the handlebars. The full wrap frame holds your cup tightly and won't bounce up and down and slide around or fall off while going over rough terrain.
- 【32 oz Maximum Carrying Capacity】FODSPORTS motorcycle cup holder handlebar provide higher carrying capacity. After tested, the FODSPORTS motorcycle atv cup holder can reach a maximum carrying capacity of 32 oz. If your bottle weighs less than 32 ounces, please don't worry about breaking or dropping it. The FODSPORTS motorcycle water bottle holder can hold 12 oz-32 oz water glasses.
- 【Wide Compatibility】FODSPORTS bike cup holder has wide compatibility, designed to be compatible with round tubing frames from 0.5" to 1.57" in diameter, and square tubing frames from 0.5" to 1.0". FODSPORTS bike water bottle holder can fit most all-terrain bikes, ATVs, motorcycles, bicycles, quads, boats, strollers, walkers, wheelchairs, scooters, golf carts, and more. And it also is a portable speaker stand.
- 【Quick Installation & 360 Degree Rotation】This motorcycle cup holder is very easy to install, it takes less than 3 minutes to complete the installation. 360 degree rotation design even makes it compatible with different angles of handlebars, suitable for more scenarios. What's more, the package also comes with a free hex nut installation tool!
Rank No. #2
kemimoto Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder with 0.6"-1.5" Alligator Clamp, Universal Water Bottle Holder for Motorcycle, ATV/UTV, Scooter, Boat, Kayak, Bike, Walker
- 【Upgraded Alligator Clamp-Patented Design】Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles.
- 【Easy to Install on 0.6"-1.5" Pole】The alligator clamp of this kayak cup holder fits 0.6"-1.5" diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.
- 【24oz Max Load Capacity】The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out. Not Compatible with Road King, Spyder RT, Burgman 400s.
- 【With Tightening Drawstring】The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride.
- 【Durable Fabric with 2 Separated Mesh Pockets】Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, durable and washable. Don’t worry about rusty and broken after 2-3 months. 2 Mesh pockets to easily hold your little things.
SaleRank No. #3
KEMIMOTO ATV Cup Holder, Upgraded Motorcycle Drink Holder Handlebar, Water Bottle Holder Mount with 0.6”-1.56” Metal Clamp for Scooter Bike Boat Stroller Wheelchair Golf Push Cart Tractor
- 【28oz Max Load Capacity】KEMIMOTO cup holder provides a higher load-bearing capacity. After testing, the maximum load-bearing capacity of the cup holder can reach 28oz. Don't worry about breaking or falling if your bottle weighs below 28oz. KEMIMOTO bottle holder could accommodate 12oz-28oz water cups.
- 【Larger &Adjustable Holder Size 3.5In】The maximum adapted diameter of the motorcycle cup holder is 3.5 inches. The capacity of the motorcycle drink holder can be manually adjusted at the bottom. Flexible arms allow different-sized cups (ordinary water cups/bottles/cans, travel mugs, beverages). Compatible with Stanley Yeti Contigo Nalgene water bottle.
- 【Strong Metal Clamp&Crocodile Bite Design】Compared with other cup holders, the KEMIMOTO ATV drink holder is made of durable and sturdy metal material; the crocodile bite design of our cup holder can obtain a stronger grip, not easy to slip or vibrate. Meanwhile, 2 pieces of anti-skip pad gaskets will be provided to fit handlebars better.
- 【Wide Compatibility 0.6”-1.56”】The mount range of the KEMIMOTO bike cup holder is 0.6 in-1.56 in. Suitable for different handlebars and different occasions, the KEMIMOTO water cup holder can fit most ATVs, motorcycles, bicycles, quads, boats, strollers, walkers, wheelchairs, scooters, and golf carts, compatible with Polaris Sportsman Scrambler Rancher, and so on four wheeler. This is also a portable speaker mount with wide compatibility and application.
- 【Anti-Break&Tough Material】Compared with the old style, the upgraded 4-wheeler cup holder is made of tougher, crack-proof, thicker PP material, not easy to crack. This holder grips hard enough not to bounce up and down, slide around, or fall off while going over rough terrain.
Rank No. #4
RAM Mounts (RAM-B-132-400U) RAM MOUNTS Level Cup 16oz Drink Holder with RAM Tough-Claw Mount RAM-B-132-400U for Motorcycle, ATV/UTV, Bike
- The RAM-B-132-400U consists of the small Tough-Claw base and RAM Level Cup Self-Leveling Drink Holder; koozie is included
Rank No. #5
Kruzer Kaddy 200 Chrome Handlebar Mount
- Fits 7/8 inch, 1 inch and 1-1/4 inch handlebars
- Easily detachable from chrome-plated steel bracket
- Comes with 2 insulated liners to accommodate many size containers
Rank No. #6
RUNNING PANTHER Motorcycle Handlebar Drink Cup Holder Plated and Rubber Chrome/Black Mount for Harley Davidson Passenger Water Bottle Holder with Mesh Basket for Honda Goldwing GL 1800 (102/142 MM)
- PRACTICAL WATER CUP HOLDER: The RUNNING PANTHER motorcycle handlebar drink cup holder not only safely holds a variety of cans, bottles or cups, but also has a stylish appearance. Whether you are riding or driving your motorcycle, these drink holders are practical accessories that allow you to enjoy your drinks comfortably.
- QUALITY PROFESSIONAL ACCESSORIES: Our RUNNING PANTHER motorcycle handlebar cup holder is chrome-plated and made of durable neoprene rubber, which won't deteriorate and has a long-lasting grip, even in the sun and all kinds of harsh environments. The lined rubber ring prevents cups from shaking and tipping over, and the rubber mesh used to place the drinks is soft and tough and won't scratch when it comes in contact with your car's paint.
- MULTIPLE MODELS: For Honda Gold Wing GL1800(2018, brake side only on bikes with DCT or CB shifters),F6B, GL1500,all VTX1300/1800,14 Valkyrie, Shadow 750 Aero, Ace&Spirit, Shadow 1100, VT1300 Custom Series models (Sabre, Stateline, Interstate), Rebel 300/500. For Yamaha all Road Star and Warrior,V Star, Venture, Bolt models, Stryker models, XSR 700/900, SCR900. For Kawasaki Vulcan 900 models,Vulcan 1500/1600 including Mean Streak, all Vulcen 2000 models. For Suzuki Boulevard M/C50/C90/M109.
- INSTALLATION: The bike cup holder is designed with a 360° swivel ball that can be freely adjusted and quickly mounted, it is convenient for you to rotate and adjust the cups. You can install it in different locations and vehicle models.Typically left or right control perch mount with vertical bolt spacing at 1-1/16" to 1-11/16" from center to center to use included M6x1 or 1/4-20x1-3/4" bolts H-D: All '96-up H-D model clutch or brake perch mounts, (except '14-up Street 500 & Street 750).
- AFTER-SALES: If there is any problem or dissatisfaction with this motorcycle handlebar cup beer holder, please contact us at first time, we will solve any problem you have about this atv cup holder within 24 hours. We warranty for three years.
Rank No. #7
Accmor Universal Cup Holder, Stroller Cup Holder, Bike Cup Holder, 360° Rotatable Large Caliber Designed Cup Holder for Stroller, Wheelchair, Walker, Scooter, Black
- Multifunctional cup holder could be used for stroller, wheelchair, walker, bike, scooter, armrest, trolleys, pushchair, lawnmowers, ATV, treadmill, golf cart ,shopping cart, kayak, boat handlebar, motorcycle, beach chair etc.
- The cup holder organizer compatible with different bottles, whose diameter less than 85mm / 3.4 in. It fits for baby bottles, water bottles, coffee mug, drink bottles, beverage cups etc.
- The width of the clip can freely adjust from 0.55 in to 1.7 in . So the cup holder can be installed on different brands of strollers with rods 1.4 cm- 4.5 cm / 0.55 -1.7 in diameter.
- The clamp designed with rubber pad, firmly clamp on the stroller rod to avoid sliding. It also allows 360 degrees rotation, so it can be installed on different angle. With 3 automatic springs in the bottle cage to keep the bottle fixed inside, prevent drinks from spilling or falling down.
- This stroller cup holder is made of safe and environmentally friendly materials. The ABS plastics and slip resistant rubber ensure that cups keep steady even on the rough road.
Rank No. #8
PSLER Motorcycle Drink Cup Holder Handlebar Mount Universal for Dyna Fat Bob Touring Road Glide Street Electra Glide Softail 1996-up Goldwing GL1800 2018-up
- 【Installation dimensions】Drink Holder Perch Mount installed on left or right control.Two sizes of screws are provided to accommodate more models:6MM 1/4 British Standard Threads and 6mm International Standard Threads.One screw is used to install on h-arley,for all h-arley 1996-up models with clutch or brake perch mounts(2014-up Street 500 and Street 750 is NOT included).The other is used to install on H-onda,for Goldwing GL1800 2018-up(ONTY for DCT or CB switch installed on brake side of bikes).
- 【Other Applicable Models】Motorcycle Handlebar Cup Holder fits for F6B,Goldwing GL1500,VTX1300/1800,Valkyrie 2014-up,Shadow 750 Aero,Ace & Spirit,Shadow 1100,VT1300 Custom Line (Sabre, Stateline, Interstate),Rebel 300/500.For Road Star & Warrior,V Star,Venture,Bolt,Stryker,XSR 700/900,SCR900.For Vulcan 900,Vulcan 1500/1600 Including Mean Streak,Vulcan 2000. For Boulevard M/C50/C90/M109.For In-dian 2014-up all models.NOTE:please check the data of the screws for avoiding incompatibility problems.
- 【Design Features & Attention】The ball mounting design for Infinite adjustments and quick release.Four buckles are connected to the swivel to fix the ball,so that the ball can rotate freely inside.Loosen the swivel,pull out the ball on the handle from the buckle for quickly disassembling.Insert the ball into the middle of the buckles and tighten the swivel for quick installation.Please don't over-tighten the swivel to prevent the four buckles from cracking and falling.
- 【Material】The motorcycle cup holders handle is made of aluminum which makes your motorcycle water bottle holder more textured.Motorcycle cup holder handlebar mount is made of soft rubber lined ring which can avoid scratching the cup and prevent your bottles from vibrating for better stability.At the same time, motorcycle drink holders are resistant to high temperatures, whether it is your hot coffee or ice water, it can easily handle it.Goldwing drink holder makes your life more convenient.
- 【Package】1 x Motorcycle Drink Holder with Basket.When you encounter problems with your Road Glide drink holder, please contact our after-sales customer service in time and we will try our best to solve the problem for you.Our aim is to make the Road King motorcycle cup holder bring you convenience instead of trouble.Please feel free to order this Street Glide cup holder.
SaleRank No. #9
Motorcycle Handlebar Mount, Cup Drink Water Bottle Holder for Handlebar, Armrest, Roll Bar (Black)
- HIGH-QUALITY MATERIALS: The cup holder is made of Aluminium alloy with black anti-oxidation layer, and the handle is made of high-strength steel. The surface is smooth, easy to clean, corrosion-resistant and durable.
- MULTIFUNCTIONAL CUP HOLDER: There are two detachable foam insulation layers inside the cup holder. The insulation layer not only helps keep your drinks hot or cold, but also fixes small cups so that they will not shake or even roll over when driving on bumpy roads. There is a drain hole at the bottom of the cup holder. When your cold drink precipitate water or overflows, you can drain the water in time to keep the inside of the cup holder clean and dry.
- WHERE CAN IT BE INSTALLED: Suitable for Harley, ATV, UTV, motorcycle, bike. Fits 7/8" to 1 1/4" handlebars(7/8" =22mm; 1" = 25mm; 1 1/4" =32mm).
- WHAT YOU WILL GET: cup holder x 1, silicone protective ring x 1, spacer x 4, Screwdriver x 1, If you have any questions, just feel free to contact us for help.
Rank No. #10
Black Big Ass™ Drink Holder with Black Perch Mount
- Designed to work with 30 oz. tumblers and other large bottles and cups
- Features a 4-1/8” diameter opening
- Made from durable neoprene rubber to grip and last
Last update on 2024-02-10 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Motorcycle Cup Holder?
Do you get stressed out thinking about shopping for a great Motorcycle Cup Holder? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Motorcycle Cup Holder, which is why we have assembled a comprehensive list of the greatest Motorcycle Cup Holder available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Motorcycle Cup Holder that you consider buying. Your questions might include the following:
- Is it worth buying an Motorcycle Cup Holder?
- What benefits are there with buying an Motorcycle Cup Holder?
- What factors deserve consideration when shopping for an effective Motorcycle Cup Holder?
- Why is it crucial to invest in any Motorcycle Cup Holder, much less the best one?
- Which Motorcycle Cup Holder are good in the current market?
- Where can you find information like this about Motorcycle Cup Holder?
We’re convinced that you likely have far more questions than just these regarding Motorcycle Cup Holder, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Motorcycle Cup Holder, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Motorcycle Cup Holder. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Motorcycle Cup Holder buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Motorcycle Cup Holder currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Motorcycle Cup Holder has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Motorcycle Cup Holder?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Motorcycle Cup Holder.
- Customer Ratings: Number ratings grade Motorcycle Cup Holder objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Motorcycle Cup Holder.
- Product Quality: You don’t always get what you pay for with an Motorcycle Cup Holder, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Motorcycle Cup Holder is should be an indication of how long it will work out for you.
We always remember that maintaining Motorcycle Cup Holder information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Motorcycle Cup Holder is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.