The Best Obd2 16 Pin Connector of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Obd2 16 Pin Connector of 2022. Check our ranking below.

2,524 Reviews Scanned

Rank No. #1

OLLGEN 16 Pin OBD Female Replacement Wire Sockets Connector OBDII Car Auto Adapter J1962 OBD 2 Plug Shell Kit Fit for Specific Vehicle

J1962 Female Port OBD2 16 Pin Female Connector ,Fixed Harness Female Assembled Plug Dash Port
OBD2 Series Port Connector,The On-Board Diagnostic Connection System is designed to meet J1962F specifi cations using standard male terminals
The Female Vehicle Connector isdesigned for under dash application, and accepts 150 Series Metri-Pack tangless female terminals available in silicon bronze.connector.
16 Pin Female Replacement Wire Sockets Connector OBDII Car Auto Adapter J1962 OBD2 Plug Shell
Directly replace the old or broken female connector. A perfect replacement for your worn or broken one, just identify which type of J1962 housing is in your vehicle for the correct fit.

Rank No. #2

CERRXIAN Auto Car OBD2 16 Pin Connector, Universal OBDII 16 Pin Male Connector Adapter,DIY OBDII PCB Diagnostic Tool for 12V 24V Car Truck(Male OBD Shell Plug+Shell+Sr+Screw)

OBD2 Male Adapter with PCB: It allows you to connect circuit boards or solder wires to PCB boards. Allows you to DIY the cables
The soldier pads in the housing do not disconnect all pins, but you can solder directly to the pin connections to get an odd numbered pin out. Note that the ground wire is already connected in the housing
DIY OBD2 PCB board, terminal 4,5 on the internal soldering point is connected, if you don't need it, you can use a knife to disconnect the PCB wiring by yourself.
It is just a small connector without any accessories or software. There is a circuit board that can be connected
Package: standard 16-pin male plug x 1; shell (upper and lower shell); spring strain relief tail x 1; screws x 4

Rank No. #3

JUTA 16 PIN OBD Female Replacement Wire Sockets Connector OBDII Car Adapter J1962 OBD2 Plug Shell Kit

[PERFECT FIT] - Brand new and high quality female connector kit. The packaging includes: 1 x OBD2 16 PIN female connector, 2 x retention clips, 16 x terminals.
[HIGH QUALITY MATERIALS] - Female connector kit uses high quality material, anti-rust, lightweight and abrasion resistance.
[COMPLETE ACCESSORIES] - Female connector kit includes an OEM J1962 housing direct replacement, pin retaining clips and 16pins sockets female.
[PERFECT REPLACEMENT] - Directly replace the old or broken female connector. A perfect replacement for your worn or broken one, just identify which type of J1962 housing is in your vehicle for the correct fit.
[QUALITY GUARANTEE] - We provide 24-month product warranty, please feel to contact us if you have any questions after received our products, we will try our best to solve your problem. You can buy it without worry.

SaleRank No. #4

YACSEJAO 2PCS Car OBD2 16 Pin Connector OBDII 16 Pin Male Wiring Plug Adapter DIY OBDII PCB Diagnostic Tool with Screw & Shell for Car Truck OBD2 Connector

OBD2 16pin Male Connector: can be used for many purposes in OBDII cars, you can DIY the connection cable or make a splitter box as you like. For example, convert the connector of old car to OBD2 16pin connector.
Quick Diagnosis: The OBD system can help technicians to diagnose quickly, repair the faulty vehicle in time, and reduce the exhaust emission of the car. Reduce maintenance costs.
High Quality: Moulded stress relief design for durability; 16-pin OBD2 male plug with standard holes and sensitive contacts. Oxygen-free copper plated contact pins, high stability. Power on and data synchronisation are fast.
OBD2 Male Adapter with PCB: It can be connected to circuit boards or lines soldered to PCB boards. The soldier pads inside the shell do not have all the pins broken out,, but you can solder directly to the pin connections to solve the problem of outsourcing the pins. Note that the ground is joined in the shell.
Package: Standard OBD2 16-pin male plug x 1; housing (top and bottom shells); spring clip wire bushing x 1; screws x 4. (Note: this is just a small connector, there are no accessories or software.)

Rank No. #5

OLLGEN 16 Pin OBD 2 OBDII Male Connector OBD2 16 pin Adaptor J1962 Connector OBDII Plug with Screws Car Diagnostic Cable Connector (OBD Male Plug)

This OBD Male Plug is assembled obd2 16pin male connector
This obd male connector enable you to do DIY cable
You can close and disclose the connector by the screws
Only a small connector,do not have any software.
Lots of cars do not have 16 pin connector,such as some old cars. But now lots of diagnose tool is 16 pin connector,so need to convert

Rank No. #6

Exctool 9 Pin J1939 to 16 Pin OBD2 Adapter Cable for Heavy Duty Trucks and Commercial Vehicles with Green Type 2 J1939 Diagnostic Connector

Converts commercial truck’s round green type 2 9 pin J1939 plug (CAN500) to 16 pin OBD II for using with OBD2 scan tools or GPS. Note: this is the 9-pin J1939 male to 16-pin OBD II female adapter; for the reverse version (OBD II male to J1939 female), please choose this one B0CCHQR134.
Ideal for truck fleet GPS, ELD, tracker, cam or diagnostic tools which has a 16 pin OBD II plug. Note: your OBD2 scanner or code reader must support J1939 protocol in order to communicate with the vehicle. It's recommended to use an OBD2 diagnostic device designed for HD trucks.
Compatible with 2015+ Freightliner/ Kenworth/ International, 2016+ Volvo & Western Star with Cummins Diesel Engine, etc. Note: trucks with black 9-pin Type I J1939 diagnostic port (usually found on 2015 & older commercial trucks) are not supported.
Moulded plug and constructed from high quality PVC and PE material, ensure maximum reliability and durability for long lasting usage.
Easy to use, plug and plug, no modification is needed. One-year replacement warranty.

Rank No. #7

Goliton OBD OBD2 16 Pin Connector Diagnostic Adapter Cable Compatible for BMW 20 Pin

【Specifically for】OBD1 to OBD2 adapter Cable has high practicality, which is used specifically for connecting your scanner and your vehicle, specifically for BMW vehicle fitted with a 20 pin socket with TCS Diagnostic tools.Please note that this item is just a cable, not a scanner or diagnostic tool.
【 Wide Compatibility 】The Diagnostic cable will work on the following OBD models: 1992 - 2001 E36 E46: 3-Series ,1996 - 2001 E39: 5-Series , 1995 - 2001 E38: 7-Series, 1996 - 2001 E36/6 Z Series , 2000 - 2001 E53: X5.
【Metal+PVC Material】OBD Adapter Cable is made of high quality metal and PVC materials, which is durable is ecofriendly. And it adopts precision injection molding with highquality workmanship, which has reliable quality and long service life.
【Easy to Use】 OBD Scanner Adapter Cable is easy to use, its 20 pins allows you to connect a vehicle with 20 pins socket with your existing OBD2 16 pins tool, which works perfectly with scanning software, stable transmission, antijamming.Practical and convenient in use.Such a practical tool you will need it.
【Standard Specification】The Connector Conform to strict quality control standards, dependable to use.Manufactured according to the original specifications.

Rank No. #8

XMSJSIY OBD OBD2 Extension Cable Pigtail Wire OBD-II 16 Pin Male Connector Open End Bare Wire Diagnostic Cord for Vehicle DIY -1M/3.28FT

This 16-pin OBD2 Extension Cable Pigtail Wire is used to extend, modify and replace the OBD2 cable in the vehicle and is suitable for on-board systems in most vehicles.
OBD2 male connecotr cable is made of high-quality PVC material, soft and durable, wear-resistant and not easy to break, internal with high purity oxygen-free copper core, strong current load capacity, long service life.
J1962 OBD2 OBD-II Male Connector with Standard 16-pin, 16-core specifications, different colors of wire corresponding to different pins: 1. Black, 2.brown, 3.red, 4.orange, 5.yellow, 6.green, 7. Blue, 8. Purple, 9. Gray, 10. White, 11. Pink, 12. Light green, 13. Black and white, 14. Brown and white, 15. Red and white, 16. Green and white.
With a length of 1M/3.28FT, it's long enough for you to do a variety of DIY operations, and because the OBD-II extension cable has a limited diameter and 16 wires, the wires are small. It takes patience and a little DIY skills to connect.
Applicable to OBDII interfaces for cars, trucks, motorcycles, etc.

Rank No. #9

iKKEGOL OBD2 OBD II Full 16 Pin Splitter Y Open Cable J1962 1 Male to 2 Female Connector Underdash Mount Bracket for Diagnostic DIY Extension Adapter 50cm/20 (1 Pcs)

"This Y Splitter connector for add device in your car, it can be hidden tucked up under the dash,and it allow the mechanic to still use diagnostic test without having to unplug the device."
OBD ii Y Spliiter cable 1 male to 2 female allow you connect tuner and any diagnostics or programming tool at the same time.
"It's great for concealing a fleetmatics, telematics, and family device"
It allows you to continue to use your OBDII port in its original position on your car and also allows you to have an open port and mounts underdash in the existing OBD2 underdash location
Cable Length:50cm/20inch/1.6feet. AWG:26awg. Pin-out: full 6pins connected

SaleRank No. #10

iKKEGOL OBD II J1962F OBD2 16 Pin Female Connector Dash Port Open Tinned Wire Pigtail Full Cables DIY with Underdash Bracket Fixed Harness Assembled Plug in 12""/30cm

J1962F OBD2 16 Pin Female Connector Fixed Harness Female Assembled Plug Dash Port with open Tinned wired
"It fit for any vehicle that has obd2, Easy to wired in correctly, No instructions needed, just make sure match pin location with old connector, match pin for pin, or wire for wire"
"All 16 Pins Performance Female OBD II OBD2 Vehicle Connector Wire Pigtail is designed for under dash application, Fixed Harness Male Assembled Plug Dash Port"
"Cable Pigtail Length:30cm / 12"""
"All 16 Pins Connected,full 18AWG litze wires cables with tinned copper core, work for your unique project"

Last update on 2025-09-30 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Obd2 16 Pin Connector?

Do you get stressed out thinking about shopping for a great Obd2 16 Pin Connector? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Obd2 16 Pin Connector, which is why we have assembled a comprehensive list of the greatest Obd2 16 Pin Connector available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Obd2 16 Pin Connector that you consider buying. Your questions might include the following:

Is it worth buying an Obd2 16 Pin Connector?
What benefits are there with buying an Obd2 16 Pin Connector?
What factors deserve consideration when shopping for an effective Obd2 16 Pin Connector?
Why is it crucial to invest in any Obd2 16 Pin Connector, much less the best one?
Which Obd2 16 Pin Connector are good in the current market?
Where can you find information like this about Obd2 16 Pin Connector?

We’re convinced that you likely have far more questions than just these regarding Obd2 16 Pin Connector, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Obd2 16 Pin Connector, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Obd2 16 Pin Connector. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Obd2 16 Pin Connector buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Obd2 16 Pin Connector currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Obd2 16 Pin Connector has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Obd2 16 Pin Connector?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Obd2 16 Pin Connector.
Customer Ratings: Number ratings grade Obd2 16 Pin Connector objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Obd2 16 Pin Connector.
Product Quality: You don’t always get what you pay for with an Obd2 16 Pin Connector, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Obd2 16 Pin Connector is should be an indication of how long it will work out for you.

We always remember that maintaining Obd2 16 Pin Connector information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Obd2 16 Pin Connector is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Obd2 16 Pin Connector of 2022 – Reviewed and Top Rated

How Do You Buy The Best Obd2 16 Pin Connector?

Related Post: