The Best Plasma Cutters of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Plasma Cutters of 2022. Check our ranking below.

2,031 Reviews Scanned

Rank No. #1

bestarc Plasma Cutter, Pilot Arc BTC500DP 2nd Generation 50Amps Dual Voltage 110/220V Plasma Cutting Machine (BTC500DP 110/220)

[Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
[Dual-Voltage 110/220V]: Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
[Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel，you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.
[Post Time Function]: BTC500DP with post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.
[Cutting Thickness]: BTC500DP is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.

SaleRank No. #2

LOTOS LTP5000D Plasma Cutter, 50 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V, Brown

★ 𝐑𝐞𝐦𝐚𝐫𝐤𝐚𝐛𝐥𝐞 𝟐𝟓% 𝐈𝐧𝐜𝐫𝐞𝐚𝐬𝐞 𝐢𝐧 𝐂𝐮𝐭𝐭𝐢𝐧𝐠 𝐏𝐨𝐰𝐞𝐫: 5/8" Clean Cut. Enhanced with 𝐚𝐝𝐝𝐢𝐭𝐢𝐨𝐧𝐚𝐥 𝐈𝐆𝐁𝐓𝐬 on LOTOS 𝐍𝐞𝐰𝐥𝐲 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐏𝐂𝐁 𝐛𝐨𝐚𝐫𝐝 & 𝐓𝐨𝐫𝐜𝐡, delivering a remarkable 25% increase in cutting power output compared to standard 50-amp plasma cutters. The advanced control systems and precision cutting flames of the newly designed torch ensure high-precision cuts with smooth and fine cut lines. Experience faster cutting speeds without compromising accuracy.
★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly designed upgraded torch and consumables guarantee enhanced precision cutting and increased durability, leading to a much longer consumable lifespan. 𝐓𝐡𝐢𝐬 𝐡𝐞𝐥𝐩𝐬 𝐥𝐨𝐰𝐞𝐫 𝐲𝐨𝐮𝐫 𝐨𝐯𝐞𝐫𝐚𝐥𝐥 𝐮𝐬𝐚𝐠𝐞 𝐜𝐨𝐬𝐭𝐬. The compact plasma cutter features a convenient handle for portability, and it utilizes non-hazardous compressed air to effortlessly cut through various materials, including stainless steel, alloy steel, mild steel, copper, and aluminum.
★ 𝐄𝐚𝐬𝐲 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4" industry-type D plug and air filter regulator enable seamless connection to your air compressor using the existing stand coupler. Setting up the entire machine is effortless and can be completed within 1 minute. ★ 𝐅𝐫𝐨𝐧𝐭-𝐌𝐨𝐮𝐧𝐭𝐞𝐝 𝐑𝐞𝐠𝐮𝐥𝐚𝐭𝐨𝐫: Emphasize the significance of pressure adjustment for attaining precise cutting. Ensures a 100% Air Leakage-Free Guarantee.
★ 𝐋𝐢𝐟𝐞𝐭𝐢𝐦𝐞 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭: we offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞 and 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 along with a 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 covered by our US based lifetime technical support. To avail the warranty, please submit the warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 dedicated customer service team is readily available to assist you through phone or email.
★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.

Rank No. #3

GZ GUOZHI Plasma Cutter, 50 Amp Air Inverter Plasma Cutter, 110V/220V Dual Voltage Digital Display IGBT Inverter Plasma Cutting Machine with 2T/4T/TEST Function

🎁GZ GUOZHI CUT 50 It is the perfect gift for Father, Husband, Friends, DIYer.
【Advanced Technology 】: 20A-50A current adjustment,90V-260V wide-voltage design,unafraid of the voltage fluctuation, 110V/220V dual-voltage automatic conversion. Maximum Cutting Thickness is 1/2 ", ideal clean cutting thickness is 2/5 ". High cutting speed, smooth cutting section and no polish demands.
【Set Up Within 1 Minute】: 1/4 inch industrial D-type plug, can easily and quickly connect to the air compressor, the users do not need to install the air pressure regulator. The whole machine can be setup quickly within 1 min.
【Safety Guarantee】: This Plasma Cutter Machine with over-heating and over-current protection functions, with excellent and reliable quality, use more safety. 2T/4T/TEST function,easy to operation.
【Portable & Lightweight】: We have made a major upgrade to the size and weight of the machine. Compared to other similar products, our CUT-50 is lightweight and small, making it easy to use even in tight spaces.

SaleRank No. #4

ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY

【EASY TO CUT, POWERFUL PERFORMANCE】Automatic dual-voltage 110/220V. With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 20-40psi when connecting 110V, the recommended psi is between 30-60psi when connecting 220V.
【EASY TO ASSEMBLE】With a plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 30 seconds and you can start cutting.
【PORTABLE & LIGHTWEIGHT】This plasma cutter machine only weighs 13 pounds, easy to carry. It's also tiny and light enough to move with strap in any workplace(strap included).
【ADVANCED DIGITAL TECHNOLOGY】You can adjust the post-flow time from 5-15 seconds to have a clean cut. Also could select 2T/4T to have a comfortable working experience. The exclusive Large LED design provides you with an accurate data display and helps you read all data easier and more clearly without taking off your helmet.
【SAFETY & DURABLE】 ARCCAPTAIN welder machine have passed a variety of professional tests and certifications including TÜV and ANSI standards before leaving our factory. We provide 30-Day Money Back Guarantee and 2-Years Warranty for you.

Rank No. #5

S7 Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage IGBT Cutting Machine

●This Plasma Cutter Is Made Of High Quality Components, By Adopting The Most Advanced Inverter Technical Of Switch Power, As Well As The Product Life And Work Efficiency Are Increased By 30% Than Ordinary Machines
●The Cutting Effect Is Also Perfect, Smooth Cutting Surface, No Need To Polish,20psi Cut Better
●This Plasma Cutter With LCD Digital Display And Equipped With A Portable Handle，It Is Very Convenient To Operate And Carry
●This Plasma Cutter Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials,The Cutting Thickness Is 1-20MM
●Our Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V, Plug And Play In Different Environments, No External Conversion Plug Required,Has Passed 12 High-Temperature Tests, Such As High Temperature, Cold, Dust, Bumps, Throwing,Noise And So On.

SaleRank No. #6

YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Contact Arcing Digital Screen Display DC Inverter 110/220V Dual Voltage Blowback Plasma Cutting Machine CUT-65DS

[NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
[Digital Screen Display]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.
[Powerful Cleaning Cutting] CUT-65DS adopts the international leading MCU intelligent digital control technology, all the main components are realized by software. Ideal Clean Cut: 5/16"@110V, 5/8"@220V Maximum Cut: 1/2"@110V, 63/64"@220V.
[PT/2T/4T Function]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
[AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.

Rank No. #7

FLARING Plasma Cutter 55 AMP, 120V 240V 4/5" Max Cutting CUT55 Plasma Cutting Machine 1/2" Clean Cut IGBT High Frequency Inverter Touch ARC Machine with Plasma Cutting Consumable Set-White

🛒【NEWLY UPGRADED & HIGH EFFICIENCY CUTTING】In continuation of the excellent performance of the original, delivering a remarkable 20% increase in cutting power output compared to standard 50-amp plasma cutters. The advanced control systems and precision cutting flames of the newly designed torch ensure high-precision cuts with smooth and fine cut lines. Experience faster cutting speeds without compromising accuracy.
🛒【READY TO WORK】It takes only 30 seconds to start cutting. The quick air coupler that matches the air hose is already installed inside the machine and takes only a second to install, so all you need to do is get the air compressor ready. It's very beginner-friendly.
🛒【DUAL VOLTAGE, POWERFUL PERFORMANCE】15-55A DC output, 1/2" ideal clean cut and 4/5" maximum severance cut under 220/240V. 10-50A DC output, 2/5" ideal clean cut and 3/5" maximum severance cut under 110/120V.
🛒【FOR SMALL BUSSINESS & HOME WORK(DIYer)】60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 30-60psi when connecting 110/220V, the recommended psi is between 30-60psi when connecting 220/240V.
🛒【BUY WITH CONFIDENCE】we offer a 30 day money-back guarantee and 1-YEAR warranty and life time technical support . You can get our online customer service or US local technical support anytime!

Rank No. #8

TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut

Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life.
Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.
Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.

SaleRank No. #9

LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2" Clean Cut

★ 𝐍𝐞𝐰𝐥𝐲 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐏𝐂𝐁 𝐛𝐨𝐚𝐫𝐝 & 𝐓𝐨𝐫𝐜𝐡: Enhanced with 𝐚𝐝𝐝𝐢𝐭𝐢𝐨𝐧𝐚𝐥 𝐈𝐆𝐁𝐓𝐬, delivering a remarkable 25% increase in cutting power output compared to standard 50-amp plasma cutters. The advanced control systems and precision cutting flames of the newly designed torch ensure high-precision cuts with smooth and fine cut lines. Experience faster cutting speeds without compromising accuracy.
★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly designed upgraded torch and consumables guarantee enhanced precision cutting and increased durability, leading to a much longer consumable lifespan. 𝐓𝐡𝐢𝐬 𝐡𝐞𝐥𝐩𝐬 𝐥𝐨𝐰𝐞𝐫 𝐲𝐨𝐮𝐫 𝐨𝐯𝐞𝐫𝐚𝐥𝐥 𝐮𝐬𝐚𝐠𝐞 𝐜𝐨𝐬𝐭𝐬. The compact plasma cutter features a convenient handle for portability. It utilizes non-hazardous compressed air to effortlessly cut through various materials, including stainless steel, alloy steel, mild steel, copper, aluminum.
★ 𝐄𝐚𝐬𝐲 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4" industry-type D plug and air filter regulator enable seamless connection to your air compressor using the existing stand coupler. Setting up the entire machine is effortless and can be completed within 1 minute. ★ 𝐅𝐫𝐨𝐧𝐭-𝐌𝐨𝐮𝐧𝐭𝐞𝐝 𝐑𝐞𝐠𝐮𝐥𝐚𝐭𝐨𝐫: Emphasize the significance of pressure adjustment for attaining precise cutting. Ensures a 100% Air Leakage-Free Guarantee.
★ 𝐋𝐢𝐟𝐞𝐭𝐢𝐦𝐞 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭: we offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞 & 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 along with a 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 covered by our US based lifetime technical support. To avail the warranty, please submit the warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 dedicated customer service team is readily available to assist you through phone or email.
★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. ★ 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.

Rank No. #10

Reboot Plasma Cutter, 60Amps Plasma Cutter Machine with 120V 240V Dual Voltage, Digital IGBT Inverter Power Plasma cutters 1/2 Inch Clean Cut New Upgrade RBC6000D

【POWERFUL PERFORMANCE】With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (12mm) ideal clean cut, 60% duty cycle. The recommended current is 60A, the recommended psi is between 30-50psi (0.21-0.35Mpa) when connecting 120V, the recommended psi is between 30-70psi (0.21-0.49Mpa) when connecting 220V.
【DUAL VOLTAGE】 Automatic dual-voltage 120/240V. It allows the machine to run directly on 240 V 50/60 Hz power or on 120 V 50/60 Hz with the use of a power adapter, without removing the covers to relink the power source. Suitable home DIY and industrial projects.
【WIDE CUTTING ABILITY】This 60 amp professional plasma cutter is suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials. It is very friendly to both DIY, beginner cutter, and professional workers.
【PORTABLE & LIGHTWEIGHT】Portable in the shop or at the job site, this plasma cutter machine only weighs 10.6 pounds, easy to carry. Package weighs 18.26 pounds. It allows the end user to easily move from location to location.
【STABLE and DURABLE】RBC6000D provides maximum customer convenience by automatically controlling the arc when cutting expanded metal or multiple pieces of metal. When cutting expanded metal, the ignition arc quickly switches as needed and provides maximum power for cutting thicker metal - all automatically No manual re-triggering is required, reducing user hand fatigue.

Last update on 2024-03-09 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Plasma Cutters?

Do you get stressed out thinking about shopping for a great Plasma Cutters? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Plasma Cutters, which is why we have assembled a comprehensive list of the greatest Plasma Cutters available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Plasma Cutters that you consider buying. Your questions might include the following:

Is it worth buying an Plasma Cutters?
What benefits are there with buying an Plasma Cutters?
What factors deserve consideration when shopping for an effective Plasma Cutters?
Why is it crucial to invest in any Plasma Cutters, much less the best one?
Which Plasma Cutters are good in the current market?
Where can you find information like this about Plasma Cutters?

We’re convinced that you likely have far more questions than just these regarding Plasma Cutters, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Plasma Cutters, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Plasma Cutters. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Plasma Cutters buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Plasma Cutters currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Plasma Cutters has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Plasma Cutters?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Plasma Cutters.
Customer Ratings: Number ratings grade Plasma Cutters objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Plasma Cutters.
Product Quality: You don’t always get what you pay for with an Plasma Cutters, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Plasma Cutters is should be an indication of how long it will work out for you.

We always remember that maintaining Plasma Cutters information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Plasma Cutters is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Plasma Cutters of 2022 – Reviewed and Top Rated

How Do You Buy The Best Plasma Cutters?

Related Post: