The Best raspberry pi gps of 2025 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best raspberry pi gps of 2025. Check our ranking below.
2,864 Reviews Scanned
Rank No. #1
VK-162 USB GPS Dongle - Remote Mount USB - External GPS Navigation Dongle - Supports Stratux, Raspberry Pi, Google Earth, Windows, Linux
- MULTI-PLATFORM: Supports Stratux, Raspberry Pi, Google Earth, Windows, Linux
- STRATUX READY: plug and play and supported by Stratux project.
- LONG CORD: 7 ft. cord for remote mounting with magnetic base.
- UPDATED CHIP: u-blox 7 chipset, WAAS capable.
- DURABLE: IPX6 waterproof / dust-tight.
Rank No. #2
YELUFT 2pcs GY-NEO6MV2 NEO-6M GPS Module Flight Control Module Support 3.3V-5V Power Supply with Ceramic Antenna for Arduino, STM32, Raspberry Pi, ESP32
- Accurate Positioning: Based on NEO-6MV2, supports GPS and GLONASS, supports simultaneous tracking of 22 satellites, tracking sensitivity -162dBm, cold-start sensitivity -148 dBm, positioning accuracy up to ±2.5m in open environments, stable positioning even in complex environments such as urban canyons or dense jungles
- Low Power Consumption: Supporting 3.3V-5V power supply, the continuous operating current is 67mA, 11mA in standby mode, and 1mA during sleep, which ensures the positioning accuracy while controlling the energy consumption to the maximum, especially suitable for the scenarios that are sensitive to the endurance, and significantly reduces the cost of post maintenance
- Hardware Interface: Standard UART-TTL level, support 3.3V/5V dual voltage compatibility, can be directly connected to Arduino, Raspberry Pi, ESP32 and other development boards; 4Pin interface ( VCC, GND, TX, RX), reserved hardware reset pin; baud rate support 4800bps~115200bps (default 9600bps), real-time switching through AT instructions or UBX commands, to adapt to different master performance
- Plug and Play: Onboard EEPROM chip operates independently of the main control chip, saves configuration parameters after power failure, and automatically reads the parameters (baud rate, positioning mode, NMEA statement screening) from the EEPROM when the power is on, eliminating the need to repeat the initialisation, and realising Plug and Play
- Widely Application: Widely used in vehicle monitoring, UAV navigation, handheld terminals and other scenarios that require high-precision positioning. You can also combine with Arduino, STM32, LoRa module, etc. to quickly build GPS tracker, weather station and other IoT applications
Rank No. #3
2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage;
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned;
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna;
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna
Rank No. #4
Onyehn VK-162 G-Mouse USB GPS Dongle Navigation Module/GPS USB Engine Board External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux
- 🌟VK-162 GPS support for windows and for linux system, not for android and IOS system
- 🌟The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- 🌟For amateur radio operators who need accurate timing for digital communications, this is a unit that will help synchronize the timing for those modes.
- 🌟This device is extremely accurate. It usually takes a couple of seconds to acquire the initial fix, followed up shortly by acquiring additional satellites for a more precise fix.
Rank No. #5
VFAN USB GPS Receiver Antenna Gmouse for Laptop PC Car Marine Navigation Magnetic Base
- Built-in high-performance UBX-G7020KT multi-GNSS chip supports GPS, GLONASS, QZSS and SBAS, enabling fast and accurate positioning and obtain error-free NTP network time service. With official free GNSS software U-Center, it is easier to parsing the data of GPGGA, GPGLL, GPGSA, GPGSV, GPRMC, GPVTG and GPZD via PC, Laptop.
- Compatible: Win 11/10/ Win 8/ Win 7/Vista/XP/CE. Free GNSS Evaluation Software. 56-Channel All-IN-VIEW Tracking. Working process: Menu-> Receiver->Port or SensorAPI to get data from GPS Receiver after instialled GNSS software (Software can be downloaded from CD-ROM and Official website)
- Support OpenCPN, Kali Linux, Realtime Google-Earth Pro and maps. WIth the USB to type c converter, it fits Andriod phone/tablet. ( need to install GPS tools apps, like GNSS Master)
- With a magnetic base, it is convenient for installation and fixation anywhere., High sensitivity and Strong Singal,Protocol: NMEA 0183, ASCII and TTL stardard. Customizd navigation rate 1-10 hz.
- Cable Length 6.5 Ft / 2 Meters , IPX4 Water Resistance / Dust-tight. One-year after-sales service. Buy with confidence.
Rank No. #6
BerryGPS-IMU GPS and 10DOF for The Raspberry Pi - accelerometer, gyroscope, magnetometer and barometric/Altitude sensor
- Compatible with all versions of Raspberry Pi. including Pico
- High quality GPS module which is able to track 22 satellites.
- Internal antenna, IMU output rate of 6,666 times a second
- 10DOF - An Accelerometer, Gyroscope, Magnetometer and Barometric/Altitude Sensor
Rank No. #7
YELUFT 1pcs GY-NEO6MV2 NEO-6M GPS Module Flight Control Module Support 3.3V-5V Power Supply with Ceramic Antenna for Arduino, STM32, Raspberry Pi, ESP32
- Accurate Positioning: Based on NEO-6MV2, supports GPS and GLONASS, supports simultaneous tracking of 22 satellites, tracking sensitivity -162dBm, cold-start sensitivity -148 dBm, positioning accuracy up to ±2.5m in open environments, stable positioning even in complex environments such as urban canyons or dense jungles
- Low Power Consumption: Supporting 3.3V-5V power supply, the continuous operating current is 67mA, 11mA in standby mode, and 1mA during sleep, which ensures the positioning accuracy while controlling the energy consumption to the maximum, especially suitable for the scenarios that are sensitive to the endurance, and significantly reduces the cost of post maintenance
- Hardware Interface: Standard UART-TTL level, support 3.3V/5V dual voltage compatibility, can be directly connected to Arduino, Raspberry Pi, ESP32 and other development boards; 4Pin interface ( VCC, GND, TX, RX), reserved hardware reset pin; baud rate support 4800bps~115200bps (default 9600bps), real-time switching through AT instructions or UBX commands, to adapt to different master performance
- Plug and Play: Onboard EEPROM chip operates independently of the main control chip, saves configuration parameters after power failure, and automatically reads the parameters (baud rate, positioning mode, NMEA statement screening) from the EEPROM when the power is on, eliminating the need to repeat the initialisation, and realising Plug and Play
- Widely Application: Widely used in vehicle monitoring, UAV navigation, handheld terminals and other scenarios that require high-precision positioning. You can also combine with Arduino, STM32, LoRa module, etc. to quickly build GPS tracker, weather station and other IoT applications
Rank No. #8
VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux Geekstory
- VK-162 GPS support windows(xp/7/10/11) and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- This usb gps can be used for mac computer, but it requires very professional technical skills.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
Rank No. #9
Geekstory G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window Geekstory, Better Than vk-172 GPS
- G72 gps usb use the newer chip(M8130-KT Chip), better than vk-172 gps.This usb gps works with Windows, Raspberry pi, Linux and Google Earth, not for iOS Android system.
- The device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change.
- You need to install driver before use it on window, but plug and play for raspberry pi and Linux. If you need some driver links and using videos for G72 gps usb, Please contact us.
- 1 X USB GPS Receiver Module, the product dimensions: 60X24X9mm. Update frequency: 1~10Hz, Baud rate: 4800, 9600, 19200, 38400, 57600, 115200bps
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
Rank No. #10
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us
Last update on 2026-03-04 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best raspberry pi gps?
Do you get stressed out thinking about shopping for a great raspberry pi gps? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching raspberry pi gps, which is why we have assembled a comprehensive list of the greatest raspberry pi gps available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for raspberry pi gps that you consider buying. Your questions might include the following:
- Is it worth buying an raspberry pi gps?
- What benefits are there with buying an raspberry pi gps?
- What factors deserve consideration when shopping for an effective raspberry pi gps?
- Why is it crucial to invest in any raspberry pi gps, much less the best one?
- Which raspberry pi gps are good in the current market?
- Where can you find information like this about raspberry pi gps?
We’re convinced that you likely have far more questions than just these regarding raspberry pi gps, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for raspberry pi gps, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible raspberry pi gps. Make sure that you are only using trustworthy and credible websites and sources.
We provide an raspberry pi gps buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available raspberry pi gps currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of raspberry pi gps has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an raspberry pi gps?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your raspberry pi gps.
- Customer Ratings: Number ratings grade raspberry pi gps objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their raspberry pi gps.
- Product Quality: You don’t always get what you pay for with an raspberry pi gps, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an raspberry pi gps is should be an indication of how long it will work out for you.
We always remember that maintaining raspberry pi gps information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding raspberry pi gps is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.