The Best straight edge clamp of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best straight edge clamp of 2022. Check our ranking below.
2,396 Reviews Scanned
Rank No. #1
ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
Rank No. #2
ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
Rank No. #3
BORA 4-piece WTX Deluxe Set, Straight Cut Guide for Circular Saws, Includes 24-Inch & 50-Inch WTX Clamp Edges, 50-Inch Extension, Saw Plate, 545410
- Includes 24-inch & 50-inch WTX Clamp Edges, 50" Extension with connectors, Saw Plate
- WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability
- Adjustable channel on saw plate fits a wide variety of straight edges up to 3.5” wide
- Fits right- and left-handed circular saws
- Ruled extrusion allows for easy measurements
SaleRank No. #4
BORA 50” NGX Clamp Edge, Straight Cut Guide for Circular Saws, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, 544050
- Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw
- Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project
- Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use
- Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension
SaleRank No. #5
BORA 100" NGX Clamp Edge, Straight Cut Guide for Circular Saws, Includes 50-Inch Clamp Edge & 50-Inch Extension for 100-Inch Cutting Length, 544100
- Clamping end moves with handle for easy adjustability from one side
- Locking handle grabs work surfaces for a secure grip that won’t budge
- Made of heavy-gauge, rigid aluminum for extreme durability
- Use with circular saws, routers, Jig saws, and other portable power tools
- Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors
Rank No. #6
Kreg KMA4700-E Straight Edge Guide XL-8 Ft
- Premium Cutting Tools: Turn most circular saws, jig saws, or trim routers into precision, edge-guided tools
- Handy Woodworking Tools: The saw guide is compatible with any right- or left-handed circular saw
- Home Improvement Tools: Cutline indicator positions cuts while the guide rail helps you cut precise lines
- Secure Workshop Accessories: The anti-slip clamp secures portable saw guide; works with materials up to 8 feet
- Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
Rank No. #7
ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (24 inch Clamp)
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
Rank No. #8
DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24in / 62cm – Circular, Rotary, Jig, Router
- INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24” Inch / 62cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area
- ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor; 30.5” x 2.1” x 0.5” inches (77.5cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp
- BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling; Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory; When clamped, this solid guide shows no play and it tightly holds its grip
- WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 24 inches/62cm; T-track on guide accepts standard accessories including all Pro Grip accessories and also allows complete flexibility when designing specialty fixtures in your shop; Low profile and flat top easy on a rotary saw, jig saw, circular table saw, router straight cut, or joiner cut
- EASY TO USE: There are two clamps that hold the wood – a stationery clamp on the end with lever and a sliding clamp that moves along the rail; To adjust, pull the sliding clamp apart until you hear a click, adjust the clamp to the wood, hold the clamp against the wood and push the other part of the clamp towards the wood until it locks, make sure the stationary clamp has the handle in the upward position when adjusting and push the lever down to lock into place
SaleRank No. #9
BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts, Includes 50-inch Clamp Edge, 50-inch Extension, Pro Saw Plate, Track Clamps, Non-Chip Strip, 544500
- Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time
- 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension.
- Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.
- Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish
Rank No. #10
ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (36 inch Clamp)
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
Last update on 2022-10-18 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best straight edge clamp?
Do you get stressed out thinking about shopping for a great straight edge clamp? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching straight edge clamp, which is why we have assembled a comprehensive list of the greatest straight edge clamp available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for straight edge clamp that you consider buying. Your questions might include the following:
- Is it worth buying an straight edge clamp?
- What benefits are there with buying an straight edge clamp?
- What factors deserve consideration when shopping for an effective straight edge clamp?
- Why is it crucial to invest in any straight edge clamp, much less the best one?
- Which straight edge clamp are good in the current market?
- Where can you find information like this about straight edge clamp?
We’re convinced that you likely have far more questions than just these regarding straight edge clamp, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for straight edge clamp, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible straight edge clamp. Make sure that you are only using trustworthy and credible websites and sources.
We provide an straight edge clamp buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available straight edge clamp currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of straight edge clamp has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an straight edge clamp?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your straight edge clamp.
- Customer Ratings: Number ratings grade straight edge clamp objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their straight edge clamp.
- Product Quality: You don’t always get what you pay for with an straight edge clamp, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an straight edge clamp is should be an indication of how long it will work out for you.
We always remember that maintaining straight edge clamp information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding straight edge clamp is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.