The Best Topping D30 Review of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Topping D30 Review of 2022. Check our ranking below.
2,886 (random num) Reviews Scanned
- ►4-Pin-XLR+4.4mm 6.35mm output► Since then, buying headphones does not have to consider whether the plug matches the headphone amplifier,because the A30Pro already provides you all in a compact body,including 4-PIN XLR,4.4mm,6.35mm.
- ►SE+BAL input pass through► When shutting down, the input signal is directly output to RCA or TRS without amplification, which will be more suitable for active speakers/monitor speakers when the DAC has pre-amplifier functions. Even better is when used with D30Pro, the excellent noise performance of D30Pro is not wasted.
- ►Say good bye to the ground loops noise► When multiple equipment are used, RCA connection may encounter ground loop noise A30Pro introduces a GND/LIFT switch as the solution. When in normal use,set it to GND; when encountering ground loop noise,switch to LIFT to change the ground point of the A30Pro from the it's chassis to other equipment which it connected to.Ground loop noise disappeared."
- ►Incredible output power► The new specifically redesigned NFCA based circuit is optimized for terrific single ended performance . Huge output power and margin bring excellent control ability, and there are no more headphones hard to drive.
- ►D30Pro is the best DAC for A30Pro► 4 x CS43198, sound of quad DAC. THD+N<0.00009%,extremely low jitter for all inputs.
- RC22 can work with: D30 pro, D50S, D70, D70s, D90, D90SE, DX3, DX3 pro, DX3 pro+, DX7, DX7 pro, DX7s, E30, E50, EX5, DX5, DM7, D90LE
- 👍 Supports high-resolution audio ▶️ TOPPING E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip.
- 👍 Coaxial and Optical also has good performance ▶️ The optical and coaxial input of E30 II supports up to 24bit192kHz audio, which is suitable for digital turntables, disk players, set-top boxes, and game consoles, so that traditional equipment can also give a new sound. The Digital Processing module provides better compatibility than the E30.
- 👍 5V power supply,anytime and anywhere ▶️ E30 II uses DC5V for power supply, which can easily access almost everywhere. You can power it up by USB port of PC, mobile phone charger or even a power bank. The built-in protection circuit will protect the E30 II and prompt on the screen after connecting to the wrong power supply.
- 👍 Discrete LNRD ▶️ How to solve the noise problem of 5V power supply? The E30 II's answer is the Discrete LNRD circuit (low noise reference driver). The Discrete LNRD circuit filters out the noise of various 5V power input and provides stable power supply of ultra-low noise reference level for E30 II. With this technology, the noise floor of E30 II is lower than 1 .5uV.
- 👍 Pure DAC & DAC+Preamp application ▶️ E30 II is able to fix to maxmum output level so that it can be worked as a pure DAC. E30 II has built-in volume control function that can adjust the volume from -99dB to 0dB by using the remote control, so you are able to directly connect E30 II to power amplifier or active speakers, and control the volume of E30 II through remote control.
- 【Two AK4493S decoding chips 】TOPPING E30 II uses two AK4493S chips. With dual upgraded DAC chips, it achieves better SINAD, SNR, dynamic range, and noise level.
- 【Plug and play】Turn your PC into a HIFI source just by connecting it to the E30 II with a USB cable. E30II applicable to a variety of PC systems. USB input support up to 32bit/768kHz, DSD512(Active), DSD256(Dop).
- 【Optical and coaxial performance】Via the optical and coaxial inputs, enjoy 24 Bit/192kHz hifi audio. Breathe new life into your digital turntables, disk players, set-top boxes, and game consoles.
- 【Discrete LNRD】TOPPING has implements discrete LNRD circuits in E30 II. This circuit modes out all kinds of noise input by 5V power supply, and effectively lowering the noise floor to <1.5uV.
- 【Pure DAC application】In pure DAC mode, DSD signal will bypass the DATT Soft Mute and ∆E Modulator to provide you a pure/direct DSD performance.
- Better Performance - D10 Balanced is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 Native.ESS SABRE ES9038Q2M HIFI DAC makes the sound quality the icing on the cake.Bring you a feast of seeing and hearing
- Intelligent design - No matter whether the USB port is still powered after shutdown, D10 Balanced will turn on/off synchronously with the PC. Solve the embarrassment that some USB devices can still work after shutting down
- Wide Compatibility - D10 Balanced offers a wide range of compatibility: Windows (via Win10), MAC and Linux can all be plug and play. D10 Balanced supports professional ASIO applications. When using ASIO under MAC or Linux, this can be set in the music playback software; When using ASIO with Windows, you can use the customized driver from Thesycon
- Audio format and sampling rate display - D10 Balanced can accurately display the audio format (PCM or DSD) and a sampling rate of the music being played. Orange LED is soft and does not dazzle even at night. The DSD playback only shows the sampling rate in ASIO mode
- Applications - The D10 Balanced apply to multiple ways of connection.You can connect the line-out output of the D10 Balanced to your active loudspeaker to send better sound directly into the loudspeaker. You can also connect D10 Balanced to the input of your amplifier / headphone amplifier to make D10 Balanced part of your HIFI system input
- 【Supports high-resolution audio】The E30II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD<0.0004%.
- 【5V power supply anytime and anywhere】E30II lite uses DC 5V for power supply, which can easily access almost everywhere. You can power it up by USB port of PC, mobile phone charger or even a power bank. The built-in protection circuit will protect the E30 II lite and prompt on the screen after connecting to the wrong power supply.
- 【All inputs support Auto On/Off function】E30II lite auto On/Off function, it will automatically turn on and set to the input which the signal is valid. And when the signal of E30 II lite’s selection is not valid for 1 minute, E30 II lite will turn off automatically.
- 【Widely compatible with operating systems】 E30 II lite supports playback of audio streams up to DSD512 and PCM768kHz. E30 II lite is widely compatible with operating systems including Windows 10, Windows 11,and most other systems. Simply connect the audio source and use E30 II lite immediately.
- 【Customized driver and ultra low jitter】E30lI Lite adopts the XMOS second-generation processor XU208 and Thesycon's customized ASIO driver, which makes the PC an excellent HIFI music source. With excellent detailing, the jitter of E30ll lite is as low as-153dB, so there's no need to worry about jitter affecting sound quality.
- 👍Supports high-resolution audio▶️ The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD <0.0004%. This not only ensures the high accuracy of audio signal restoration but also gives you a live music experience as if you were there.
- 👍Professional performance, instant listening▶️ E30 II lite supports playback of audio streams up to DSD512 and PCM768kHz. E30 II lite is widely compatible with operating systems including Windows 10, Windows 11, MAC, Linux and iOS/Android systems. Simply connect the audio source and use E30 II lite immediately. Only the driver installation and setup is required to use ASIO applications on Windows systems*.
- 👍Preamp Mode▶️ The E30 II lite is equipped with a built-in volume control function that makes it easy to adjust the volume from -99dB to 0dB using the remote control. The E30 II lite can also be connected directly to an amplifier, pure power amplifiers or active speakers, controlling the volume level through the E30 II lite, allowing you to enjoy music more comfortably.
- 👍Coaxial and Optical▶️ The optical and coaxial input of E30 II lite supports up to 24bit/192kHz, which is suitable for digital turntables, CD players, set-top boxes and game consoles, so that traditional equipment can also give a new sound.
- 👍Good partner ——L30 II headphone amplifier ▶️ E30 II lite and L30 II have the same design concept, both detailed workmanship and sound quality performance show the high quality of the product. The L30II headphone amplifier can drive most of the headphones on the market and match perfectly. Whether you are a music enthusiast or an everyday user, its excellent sound quality can meet your needs.
- Supports high-resolution audio: The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD<0.0004%.
- Professional performance, instant listening: E30 II lite supports playback of audio streams up to DSD512 and PCM768kHz. E30 II lite is widely compatible with operating systems including Windows 10, Windows 11, MAC, Linux and iOS/Android systems. Simply connect the audio source and use E30 II lite immediately. Only the driver installation and setup is required to use ASIO applications on Windows systems*.
- Ultra low jitter at all input: With excellent detailing, the jitter of E30II lite is as low as -153dB, so there's no need to worry about jtter affecting sound quality.
- Coaxial and Optical Good performance and compatibility: The optical and coaxial input of E30 II lite supports up to 24bit/192kHz, which is suitable for digital turntables, CD players, set-top boxes and game consoles, so that traditional equipments can also give a new sound.
- Discrete L NRD: The Discrete LNRD circuit filters out the noise of various 5V power input and provides stable power supply of ultra-low noise reference level for E30II lite. With this technology, the noise floor of E30 II lite is lower than 1.9uV.
- Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 3002 load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N.
- Compatible with almost all kinds of headphones: L30 II's output has high output voltage, high current, low output impedance, so no headphones that can't be dealt with. High output voltage can easily drive high impedance headphones; High output current allows low- sensitivity headphones to obtain enough power; The low output impedance will not bring unnecessary effect on FR when driving low-impedance headphones., Different headphones can be easily driven by the L30 II.
- Low distortion while outputting high power: The L30 II can maintain ultra-low distortion output under high power load. Under 32 ohm load and 2500mW output, the THD+N is lower than 0.00008%; under 300 ohm load and 300mW output, the THD+N is lower than 0.00007%.
- Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to high-sensitity IEMs. With the help of extremely low noise 0.3uV, even IEMs will not hear any background noise.
- You can connect D10 Balanced to your amplifier/headphone amplifir's input to make D10 Balanced one part of your HIFI system. D10 Balanced will greatly improve sound quality in case playing high resolution files.
- D10 Balanced is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 Native
- D10 Balanced will synchronously power on/off with PC.
- D10 Balanced supports professional ASIO applications. When using ASIO in MAC or Liunx, it can be set in the music playback software; when using ASIO with Windows, you can use the customized driver from Thesycon.
- D10 Balanced can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night.
Last update on 2024-03-06 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Topping D30 Review?
Do you get stressed out thinking about shopping for a great Topping D30 Review? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Topping D30 Review, which is why we have assembled a comprehensive list of the greatest Topping D30 Review available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Topping D30 Review that you consider buying. Your questions might include the following:
- Is it worth buying an Topping D30 Review?
- What benefits are there with buying an Topping D30 Review?
- What factors deserve consideration when shopping for an effective Topping D30 Review?
- Why is it crucial to invest in any Topping D30 Review, much less the best one?
- Which Topping D30 Review are good in the current market?
- Where can you find information like this about Topping D30 Review?
We’re convinced that you likely have far more questions than just these regarding Topping D30 Review, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Topping D30 Review, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Topping D30 Review. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Topping D30 Review buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Topping D30 Review currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Topping D30 Review has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Topping D30 Review?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Topping D30 Review.
- Customer Ratings: Number ratings grade Topping D30 Review objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Topping D30 Review.
- Product Quality: You don’t always get what you pay for with an Topping D30 Review, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Topping D30 Review is should be an indication of how long it will work out for you.
We always remember that maintaining Topping D30 Review information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Topping D30 Review is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.