Skip to content

The Best Touch Screen Raspberry Pi Zero of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Touch Screen Raspberry Pi Zero of 2022. Check our ranking below.

2,634 Reviews Scanned

Rank No. #1
Raspberry Pi Zero Screen with Backlight Knob, iUniker 3.5 inch 60+ fps 480x320 Resolution Raspberry Pi Zero Touchscreen High Speed Pi Zero W Screen for Raspberry Pi Zero W 2/Pi Zero W/Zero 1.3
  • Fastest 3.5 inch Touchscreen for Raspberry Pi Zero WH / Zero w/ Zero W 2, Super HD 480x320 Resolution, 60+ fps
  • Perfect fit your Pi Zero WH / Zero w/ Zero W 2, PORTABLE MONITOR
  • Customized Circuit Board for 3.5-inch, high speed Raspberry Pi touchscreen
  • Notice: Only Fit for Raspberry Pi Zero and Zero W/ Zero W 2
Rank No. #2
3.5 inch Touch Screen TFT LCD for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH 480x320 Pixel XPT2046 Controller SPI Interface
  • 3.5 inch Touch Screen ,Resistive touch control,TFT LCD Type
  • Resolution: 320*480 (Pixel), Touch Screen Controller:XPT2046
  • Supports any revision of Raspberry Pi (directly-pluggable),includes 4B/3B+/3B/2B/B+/Zero/Zero W/Zero WH ,etc.
  • Drivers provided (works with your own Raspbian/Ubuntu/Kali). Supports FBCP software driver as well, allows to config software resolution and set up dual-display. Size perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+).
  • Combined with the Raspberry Pi, allows you to: Take photos by touching (up to 17 camera modes), Use software keyboard (system interaction without keyboard/mouse)
Rank No. #3
4 inch HDMI LCD IPS Display 800x480 Resolution Resistive Touch Screen HDMI Interface for Raspberry Pi 4 B/3 B/3 B+/2 B/B+/B Zero W
  • 800x480 high hardware resolution, 4 inch touch screen, IPS display, high quality and perfect displaying from very wide viewing angle.Backlight can be turned off to lower power consumption.
  • Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
  • Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie),Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
  • HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
  • Online development resources and Technical Support is provided, please contact us FIRST if you have any problem .
Rank No. #4
kuman 3.5 Inch Touch Screen TFT LCD Display SPI with Touch Pen for Raspberry Pi 3B+/ Pi 2B, Pi Zero W, Pi A/B
  • The 3.5 in Touch Screen can support two screens simultaneous display(the Raspberry Pi can be connected to this screen and another HDMI screen at the same time).
  • This 3.5 inch resistive Touch Screen can be directly inserted into any version of the Raspberry Pi (Raspberry Pi zero, zero w, a, A+, b, B+, 2B, 3B, 3B+).Raspberry Pi is not included.
  • This Touch Screen Support for Raspbian/Ubuntu/Kali/RETROPIE systems, We provide drivers and image freely. (Please scan the QR code on the instruction to download it)
  • The Raspberry Pi screen can work with fbcp software driver, you can adjust the resolution by the software (The RPI screen original resolution is 320×480).
  • The Raspberry Pi Display support 125MHz SPI signal input, It can display stable without Flicker. When it work with Raspberry Pi, the refresh rate is about 50fps, it is enough to play the video and game.
SaleRank No. #5
HMTECH Raspberry Pi Screen 10.1 Inch Touchscreen Monitor 1024x600 Portable HDMI Monitor 16:9 IPS Screen Display for Raspberry Pi 4/3/2/Zero/B/B+ Win11/10/8/7, Free-Driver
  • Raspberry Pi Touchscreen Monitor -- 10.1 inch Raspberry Pi monitor equip with IPS screen and HD 1024*600 high resolution, ensure the touch monitor more precise color restoration exquisite picture quality and more rich color. 178° viewing angles is more ideal for work and for reviewing on-screen with multiple people in the room.The monitor adopts tempered glass and full bonding process.
  • Easy-use for Touch Screen -- Excellent sensitivity capacitive technology and multi-touch capability allows you to swipe, scroll, select, zoom in, zoom out, and move a cursor about in just 3-5 ms. Touchscreen drivers with support for 5-finger touch and an on-screen keyboard are integrated into the Raspberry Pi OS for full functionality without a physical keyboard or mouse.
  • Plug-n-play Raspberry Pi Display -- Simply connect the screen to device via HDMI interface and power the USB touch port to achieve touch function and no need to install any driver. The monitor is fairly standard in size and shape without manual calibration. The screen resolution can also be adjusted setting according to the user's requirements.
  • Three Display Modes for Laptop -- Duplicate mode, extend mode and second screen mode. Each mode has different use effects, bringing convenience and leisure to your work and life. Right click display settings on your laptop desktop, and then select three different usage modes in the multi display settings bar according to your needs. Go and get a portable laptop monitor now and feel a different experience.
  • More Application HDMI Monitor -- Broadly you can use it with your Raspberry Pi 4/3/2/1/3B+/BB,Banana Pi. Windows 7/8/10 PC, Microsoft, TV. Video game console like NS Switch/XBOX. Other devices or systems like Retro Pi, NOOBS, Debian, Ubuntu and Kodi are all supported. Note:The attached HDMI cable is only applicable to devices with standard HDMI interface. If you need to use it for Raspberry Pi 4, please buy an Micro-HDMI-HDMI Cable. This screen does not come with a case, but with a bracket.
Rank No. #6
1.54in LCD Display Touch Screen Mini Game Console Screen Board Module for Raspberry Pi 2B/3B+/Zero W
  • The physical resolution is 240x240.
  • The system setting defaults to 480x480 and the display area is larger.
  • With touch function. (The game function does not touch. Because the Retropie system does not support touch.)
  • Provide Raspbian and Retropie system images and drivers. (Available after purchase).
  • Without charging function.
Rank No. #7
4.3inch HDMI LCD 800x480 IPS Capacitive Touch Screen HDMI Interface Support All Version Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano BB Black Banana Pi Windows 10/8.1/8/7
  • 4.3inch HDMI LCD (B),IPS screen,Capacitive Touch Screen LCD.HDMI interface, 800x480 hardware resolution, configurable by software (up to 1920x1080),Supports Multi mini-PCs, Multi Systems
  • Supports popular mini PCs such as Raspberry Pi,All Version of Raspberry Pi(4B/3B+/3B/2B/Zero/Zero W/Zero WH), When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free. Note: when it connects with Raspberry PI Zero/Zero W/Zero WH,Mini HDMI Converter Adapter and USB Converter Adapter should buy separately.
  • Supports Jetson Nano, BB Black, Banana Pi, as well as general desktop computers,When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
  • Supports popular game consoles like Microsoft XBOX360,etc.
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, speaker connector, supports HDMI audio output.
SaleRank No. #8
GeeekPi 3.5 inch Touch Screen with Case for Raspberry Pi 4, with Fan and Heatsinks, 320x480 Resolution TFT LCD Display for Raspberry Pi 4 Model B (Raspberry Pi Board NOT Included)
  • This kit contains an ABS case and a 3.5 inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included!
  • The 3.5 inch resistive touch screen can be directly inserted into any version of the Raspberry Pi boards, but the ABS case is only compatible with Raspberry Pi 4B; The resolution of 3.5 inch touch screen can be adjusted by software; The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker; It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provided freely.
  • Package includes: 1x ABS Case for Raspberry Pi 4B, 1x 3.5 inch TFT resistive touch screen, 1x Aluminum heatsinks, 1x Touch Pen, 1x 30x30x7mm cooling fan
Rank No. #9
for Raspberry Pi 3B+ 3.5" TFT Touch Screen with Case, Touch Pen and Heat Sink, 320x480 Resolution LCD Display for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B
  • STARTO Raspberry Pi 3 B+ 3.5 inch Touch Screen connects with SPI directly and support HDMI screen display at same time, better as human interaction for observe and control your experimental process.
  • The Raspberry Pi 3.5 inch Touch Screen can adjust the resolution by the software which also available for connecting Raspberry Pi 3 B+ directly, without additional power.(The RPI screen original resolution is 320×480).
  • The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker.It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provides freely. (Please scan the QR code on the instruction to download it)
  • The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen case; The 3.5 inch resistive Touch Screen can be directly inserted into any version of the Raspberry Pi (Raspberry Pi zero, zero w, a, A+, b, B+, 2B, 3B, 3B+)
  • Protecting your screen and pi,the split design is easier to install,with white nylon column to help screen maintain balance.(No include Raspberry Pi)
Rank No. #10
kuman Raspberry Pi Screen 3.5 Inch TFT LCD Display with Touch Screen, Touch Pen for Raspberry Pi 3B+/ Pi 2B, Pi Zero W, Pi A/B
  • The 3. 5 in touch screen can support two screens simultaneous display(the Raspberry Pi can be connected to this screen and another HDMI screen at the same time)
  • This 3. 5 inch resistive touch screen can be directly inserted into any version of the Raspberry Pi (Raspberry Pi zero, zero w, a, A+, b, B+, 2B, 3B, 3B+)
  • This Touch screen Support for Raspbian/Ubuntu/Kali/RETROPIE systems, We provide drivers and image freely. (Please scan the QR code on the instruction to download it)
  • The Raspberry Pi screen can work with fbcp software driver, you can adjust the resolution by the software (The RPI screen original resolution is 320×480)
  • The Raspberry Pi Display support 125MHz SPI signal input, It can display stable without Flicker. When it work with Raspberry Pi, the refresh rate is about 50fps, it is enough to play the video and game

Last update on 2022-08-01 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Touch Screen Raspberry Pi Zero?

Do you get stressed out thinking about shopping for a great Touch Screen Raspberry Pi Zero? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Touch Screen Raspberry Pi Zero, which is why we have assembled a comprehensive list of the greatest Touch Screen Raspberry Pi Zero available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Touch Screen Raspberry Pi Zero that you consider buying. Your questions might include the following:

  • Is it worth buying an Touch Screen Raspberry Pi Zero?
  • What benefits are there with buying an Touch Screen Raspberry Pi Zero?
  • What factors deserve consideration when shopping for an effective Touch Screen Raspberry Pi Zero?
  • Why is it crucial to invest in any Touch Screen Raspberry Pi Zero, much less the best one?
  • Which Touch Screen Raspberry Pi Zero are good in the current market?
  • Where can you find information like this about Touch Screen Raspberry Pi Zero?

We’re convinced that you likely have far more questions than just these regarding Touch Screen Raspberry Pi Zero, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Touch Screen Raspberry Pi Zero, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Touch Screen Raspberry Pi Zero. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Touch Screen Raspberry Pi Zero buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Touch Screen Raspberry Pi Zero currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Touch Screen Raspberry Pi Zero has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Touch Screen Raspberry Pi Zero?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Touch Screen Raspberry Pi Zero.
  5. Customer Ratings: Number ratings grade Touch Screen Raspberry Pi Zero objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Touch Screen Raspberry Pi Zero.
  7. Product Quality: You don’t always get what you pay for with an Touch Screen Raspberry Pi Zero, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Touch Screen Raspberry Pi Zero is should be an indication of how long it will work out for you.

We always remember that maintaining Touch Screen Raspberry Pi Zero information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Touch Screen Raspberry Pi Zero is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: