The Best ups for raspberry pi of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best ups for raspberry pi of 2022. Check our ranking below.

2,628 (random num) Reviews Scanned

Rank No. #1

SunFounder Raspberry Pi UPS Power Supply Module V2.0 Supports Pass Through Charging, 5V/3A Lithium Battery Power Pack Expansion Board Compatible with Raspberry Pi 4, 3 and All Model B/B+

➢Raspberry Pi UPS - A Power Supply Module designed for Raspberry Pi UPS compatible with Raspberry Pi 4, 3 and all Model B/B+ series. Also suitable for other boards powered by USB (5V/3A) such as Banana Pi/ODROID-C4.
➢Pass Through Charging - Requires two 18650 Batteries (not included), with Pass through Charging function, it can power to the Raspberry Pi while charging .
➢Over Charge/Discharge Protection - Charging ends when the total battery voltage reaches 8.4V. When the single battery voltage is below 3.2V, the battery protection activates and the battery is no longer discharged.
➢Balance Charging & Over Heating Protection - The battery charging current will be reduced or even discharged if the voltage of a single battery exceeds 4.2V. If the temperature reaches 75 degrees Celsius, the DC-DC will shut down to prevent overheating damage.
➢UPS Output: 5V/3A, UPS Input: 5V/2A, Dimension: 90mm x 56mm x 24mm

Rank No. #2

[Function]X728 provides 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software,Battery capacity reading, Low battery automatic shutdown, Buzzer alarm, RTC
[User Manual] Refer to Geekworm WiKi search X728; Match metal case for X728, refer to X728-C1(ASIN:B09Z6C64NN).PSU for X728, refer to ASIN: B09J856PND.
[How to Power & Specifications]Power supply via Type-C socket : 5Vdc ±5%, ≥3A, Via DC power jack : 5Vdc ±5%, ≥4A; UPS output : 5.1V ±5% Max 6A; UPS charging current: 2.3~3.2A; Terminal Battery Voltage : 4.24V; Recharge Threshold : 4.1V
[Important Note]√1. Do not apply power to your RPi via the Micro USB or USB Type-C socket. √2. Do not use battery with built-in protection circuit. √3.Please make sure the polarity of battery is "+" to "+" and "-" to "-" and match with the "+" "-" mark on battery holder!!!
[Application]X728 reserves the 40-pin header to stack with other Raspberry Pi accessory boards for enhanced applications. The X728 can also be used with the X825/X828/X829 (2.5" HDD/SSD Shield) and X857/X862/X872 (MSATA/M.2 SSD shield) for safe data backup.

Rank No. #3

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 5 4B 3B+ 3B 2B+

Note: If you use UPS to power Raspberry Pi 3B/3B+ while charging, please make sure that the input power is not less than 2.5A. Recommended use: 3V 2.5A power supply
The link to the assembly video is available on the product page, Two power supply modes: outdoor portable type and indoor UPS power supply mode: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A
4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work
The UPS has overcharge and overcurrent protection functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the output. The lithium battery board that comes with the UPS has an overcharge and overdischarge protection board. Prevents the battery from being overcharged and overdischarged when the external circuit is abnormal, thereby reducing the possibility of damage to the battery
Two output modes: In addition to the regular output via the USB port, the V3P output interface adds an LC filter, the ripple is about 20mV under no-load condition, and the ripple is about 50mV when Raspberry Pi 4 is connected

Rank No. #4

Geekworm Raspberry Pi Zero 2 W 18650 UPS Expansion Board X306 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Raspberry Pi Zero.
【One-Cell 18650 UPS HAT】Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W, Max 5.1V 4000mA Power Backup with 18650 single cell battery holder
【3-Port USB HUB】On-board three USB 2.0 Ports; Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
【How to Power】Power via USB Type-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) )
【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses.

Rank No. #5

GeeekPi Raspberry Pi UPS V5 Power Supply Uninterruptible UPS HAT,Support 18650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A

UPS Plus is a new generation of UPS power management module which supports OTA firmware upgrade and supports RTC onboard.
There are two INA219 chip onboard to detect batteries voltage and the voltage output from UPS Plus to Raspberry Pi.
Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Package Inlcudes:1 x UPS Plus For Raspberry Pi,4 x M2.5 copper pillar,4 x M2.5 screws,4 x M2.5 long copper stick,4 x M2.5 nuts,1 x Acrylic shield,1 x Instruction

Rank No. #6

Geekworm X708 UPS HAT for Raspberry Pi, X708 V2.0(Max 5.1V 6A) UPS HAT& Power Management Board with Power Loss Detection & Safe Shutdown & Auto Power On Function Compatible with Raspberry Pi 4B/3B+/3B

[Function]X708 provides UPS function such as Power Loss Detection(PLD), Automatic Safe Shutdown(ASD), Auto Power On(AON) etc., DC 5V Max. 6A output;Document pls refer to geekworm WiKi search X708;
[Compatibility&Cooling]Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3B+/3B/2B/ B+; With cooling fan for heat dissaption of your Raspberry Pi, no need extra cooling solution.
[How to Power&Specifications]Power supply via Type-C socket: 5Vdc ±5%, ≥3A; Via DC power jack: 5Vdc ±5%, ≥4A; UPS output : 5.1V ±5% Max 6A; UPS charging current: 1.8~2.2A / 2.3~3.2A; Terminal Battery Voltage : 4.24V;Recharge Threshold : 4.1V; Battery: 3.7V Lithium Battery
Reserved two kind battery port (XH2.54 and PH2.0), supports 3.7V lithium battery and 3.7V lithium polymer battery, No capacity limit, only request 3.7V lithium battery (No include lithium battery) ; Add more battery, pls refer to X708-A1 8-cell Battery Holder(ASIN: B08L5W8NJ3) or X728-A2(ASIN: B08B5SW3TF)
[Case for X708]Match metal case for Raspberry Pi 4 and X708, refer to X728-C1(ASIN: B09Z6C64NN), X728-C1 does not support X708-A1/X728-A2. X825-C8 case does not support X708.

Rank No. #7

MakerHawk Raspberry Pi UPS Power Supply Uninterruptible UPS HAT 18 650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4 Model B / 3B + / 3B (Not include battery)

[Intelligent Design] UPS for Raspberry PI 4B / 3B+ / 3B. Built-in power path management, support side-loading, load high current line compensation function. There are two USB A port power output, and also adds type C output. It provides uninterruptible power for the Raspberry Pi to make your Raspberry Pi still work while moving, and its design is so smart that you can get rid of troubled of a mass wire.
[LED Power Display] It can use most of the 18 650 batteries and fully comply with the battery characteristics in terms of battery life. The illuminated LED light can quickly show the remain power and support the discharging while charging. You can directly connect to the external power supply for charging. At the same time, the Raspberry Pi will not be turned off.
[Multiple Protection] Support output overcurrent, overvoltage, short circuit protection; input overvoltage, overcharge, overdischarge, overcurrent discharge protection and machine overheat protection. Safe and reliable.
[Use and Note] This product belongs to the power supply device. Please keep it out of the reach of children. Please strictly refer to the instructions for the UPS product, install the battery first, then connect the UPS to the Raspberry Pi. Please do not reverse the battery. If the battery polarity is reversed, it will directly burn the power management chip of the device. Do not add any Components by yourself.
[Package] 1* Raspberry Pi UPS; 4* M2.5* copper stick; 4* M2.5 screws; 4* M2.5* long copper stick; 4* M2.5 nuts; 1* Acrylic shield; 1* Instructions. [100% Satisfaction Warranty] We always bear in mind that your satisfaction is our priority. For any reason you are unsatisfied with our product at any time, just feel free contact support for exchange or refund. Click MakerHawk-US then Ask a question to contact us.

Rank No. #8

UPS HAT (C) for Raspberry Pi Zero Boards, Provides 5V Uninterruptible Stable Power, with Pogo Pin Connector

Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards
Voltage boost chip, providing regulated 5V power output
Li-po battery recharge chip, with dynamic path management, more stable power supply
I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable; Recharging indicator for monitoring the battery operating status

Rank No. #9

Pisugar S Plus Portable 5000 mAh UPS Lithium Battery Power Module Platform for Every Raspberry Pi 3B/3B+/4B Model Accessories handhold(Not Include Raspberry Pi)

UPS function: The external power supply is disconnected to continuously supply power and obtain the external power status. External power access can trigger boot, suitable for unattended projects.
Input and output: 5V3A output, 5V3A input
GPIO button: It can trigger the device to turn on when it is turned off, and it can be used as a custom button after turning on (when the automatic power-on function is turned off)
Bottom connection: convenient connection method, complete installation in one minute, without affecting GPIO expansion
Expansion: Expansion through wireless charging and solar charging

Rank No. #10

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 4000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 5 4B 3B+ 3B 2B+

Support Charge While Discharge: It will not affect the output of UPS power supply when external power outage. Note: If you use UPS to supply power for Raspberry Pi3B/3B+ when it is charging, please ensure that the input power is not lower than 2.5A. Recommended Use: 3V 2.5A power supply
Two Power Modes: Outdoor portable model and Indoor UPS power Supply mode: 1) As an outdoor portable power supply, the motherboard is powered by a lithium battery. and he maximum external power supply capacity is: 5.1V. 2.5A. 2)As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V 2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1V.3A. Battery size: 70mm x 41mm x 9.5mm
4+2LED are Designed to Show the Status of Battery Power, Charge or Discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work
The UPS has Overcharge and Overcurrent Protection Functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the output. The lithium battery board that comes with the UPS has an overcharge and overdischarge protection board. Prevents the battery from being overcharged and overdischarged when the external circuit is abnormal, thereby reducing the possibility of damage to the battery
Two Output Modes: In addition to the regular output via the USB port, the V3P output interface adds an LC filter, the ripple is about 20mV under no-load condition, and the ripple is about 50mV when a Pi 4 is connected

Last update on 2023-04-29 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best ups for raspberry pi?

Do you get stressed out thinking about shopping for a great ups for raspberry pi? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching ups for raspberry pi, which is why we have assembled a comprehensive list of the greatest ups for raspberry pi available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for ups for raspberry pi that you consider buying. Your questions might include the following:

Is it worth buying an ups for raspberry pi?
What benefits are there with buying an ups for raspberry pi?
What factors deserve consideration when shopping for an effective ups for raspberry pi?
Why is it crucial to invest in any ups for raspberry pi, much less the best one?
Which ups for raspberry pi are good in the current market?
Where can you find information like this about ups for raspberry pi?

We’re convinced that you likely have far more questions than just these regarding ups for raspberry pi, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for ups for raspberry pi, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible ups for raspberry pi. Make sure that you are only using trustworthy and credible websites and sources.

We provide an ups for raspberry pi buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available ups for raspberry pi currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of ups for raspberry pi has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an ups for raspberry pi?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your ups for raspberry pi.
Customer Ratings: Number ratings grade ups for raspberry pi objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their ups for raspberry pi.
Product Quality: You don’t always get what you pay for with an ups for raspberry pi, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an ups for raspberry pi is should be an indication of how long it will work out for you.

We always remember that maintaining ups for raspberry pi information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding ups for raspberry pi is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best ups for raspberry pi of 2022 – Reviewed and Top Rated

How Do You Buy The Best ups for raspberry pi?

Related Post: