Skip to content

The Best Xy Cnc Table Kit of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Xy Cnc Table Kit of 2022. Check our ranking below.

2,052 Reviews Scanned

Rank No. #1
Genmitsu T-Slot Table 6060 Extension Aluminum Spoilboard for CNC Router Machine PROVerXL 4030 XY-Axis Extension Kit, 840 x 600 x 15mm (33.1''x 23.6''x 0.6'')
  • Compatibility: Compatible with Genmitsu PROVerXL 4030 XY-Axis Extension Kit.
  • Dust Baffle Included: This kit comes with two dust baffles, which keep the Y-frames on both sides clean to work properly.
  • Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoilboards or jigs.
  • Easy to Use: The Aluminum Base comes with 4 T-Slots on both sides. It’s easy to install and can be used with most bench clamping systems.
  • High Quality: Made of high strength aluminum alloys. Strong and durable. Compared with MDF Spoilboard, the aluminum base can be used with a Coolant Mist System and will not expand. The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.
Rank No. #2
300mm Length Travel Linear Stage Actuator with Square Linear Rails + CBX1605 Ball Screw 1605 Ballscrew Motorized XY XYZ Linear Stage Table with NEMA23 Stepper Motor for DIY CNC Router Milling Machine
  • 【Product Structure Analysis】- Nema23 Stepper Motor+Stepper Motor Connecting Piece+Coupling+1605 Ball Scew+Slide Block+Sliding Table +Bearing Piece+Base.
  • 【Nema23 Stepper Motor】- Motor length: 56mm. Motor flange size: 57mm.  Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 Ω. Inductance: 2.4mH. Rotor Inertia: 440g.cm. Wiring: Red(A+), Green(A-), Yellow(B+), Blue(B-).
  • 【1605 Ball Screw】- Drive type: CBX1605 ball screw. Effective travel length: 300mm. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw rod with precision up to 0.003mm.
  • 【Slide Block】- Length: 60mm. M4 sliding nut design on the side, limit switch can be installed at any position. The slider is made of 6030 aluminum and are oxidized, which is beautiful and generous.
  • 【Main Application】- The important hardware equipment that constitutes industrialized machinery can accurately control the accuracy and speed of the moving parts of mechanical equipment. It is suitable for CNC machine, placement equipment, laser cutting equipment, spraying equipment, medical equipment, battery equipment and other industrial automation fields.
Rank No. #3
Genmitsu 24” x 24” (600 x 600mm) XY-Axis Extension Upgraded Accessories Kit for CNC Router Machine PROVerXL 4030
  • Level up your CNC: This kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to a 6060 (24”x 24”) with pre-installed axis carriages. Evolve with your CNC, upgrade as you go, start big and get to making MORE.
  • Compatibility: Drop-in replacement for use with a Genmitsu PROVerXL 4030. The 6060 Aluminum Board & MDF Board will also be available soon.
  • Flexible Extension: You could extend to 6060, 6040, or 6030 with this kit, just built to suit your needs.
  • Simple Assembly: We will take you through the assembly process every step of the way. You could find the Installation Guide located in our at the resource center.
  • Cost-Effective: Save money by putting your current CNC to better use. You don’t need to spend more on complicated assembly.
Rank No. #4
CNC Router Drawing Robot Kit Writer XYZ Plotter iDraw Hand Writing Robot Kit Open Source for Maker/Geek, Working Area A4
  • Imitation human writing: A drawing robot that can move a pen or other instrument to draw/write digital artworks on the flat surface like a human, no matter Chinese or English, etc.
  • Colorful layer painting: It can draw the pictures with many different colors. Good for making the posters.
  • Open source: If you want to design your own XY plotter, the interface documentation can be provided (the detailed info., as below in the description) .
  • A research tool for geeks, creators, DIY enthusiasts, students, teachers, automation researchers, etc.p
  • Applicable system(s):XP/win7/win8/win10 ,Mac is not compatible. Supported Software: Bachin Draw,
Rank No. #5
Masuter 4040 CNC Router Machine, 3-Axis Engraving Milling Machine 15.75x14.96” Working Area for Carving Cutting Wood Acrylic MDF Nylon
  • Masuter 4040 is a budget-friendly CNC router with large working area of 400 x 380 x 55mm (15.75” x 14.96” x 2.16”). It uses a 60W spindle and NEMA17 stepper motors. Max moving speed is 2000mm/min and spindle speed range is 0~10000.
  • The control board is equipped with an upgraded 32-bit chip which works more efficient and stable. It also supports add-ons such as offline controller, 300W spindle and power modules. (Add-ons sold separately)
  • Masuter 4040 is capable to engrave, cut and drill many kinds of material such as wood, MDF, acrylic and resin etc. Recommended settings: speed-1000mm/min; depth per pass-0.2mm; plunge rate-200mm/min.
  • HOME function and Emergency-Stop button are integrated on the machine. The machine will go to home with simply press the button.
  • Main parts are pre-assembled. It takes about 20-30mins to fully assembly. The machine is compatible with Grbl software. It supports Windows XP/7/10, Linux and Mac OS.
Rank No. #6
Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move, Multifunction Milling Working Table Heavy-duty Structure,for Milling and Drilling Machine
  • Premium Quality Structure: Built by heavy-duty cast iron material, which is anti-corrosion and rust resistance, angle milling table can withstand the tough environment and designed for long service time.
  • Highly Polishing & Stiffness: The compound slide table, with great hardness and stiffness, is high ground and not easy deformation. Three precise T-slots can meet different force requirements.
  • 2 Axis 4 Ways Move: Handles with trapezoidal thread spindles is easy to adjust the directions. X-axis travel: 210 mm, Y-axis travel: 110 mm. With a precise scale on it, you can adjust the optimal working position as you need.
  • Tightness Adjustment: Equipped with several quality bolts and nuts, you can easily adjust the tightness of this cross slide table. Convenient for your use.
  • Wide Application Area: This milling working cross table machine is great for mounting on drilling machines for precise positioning. It can be used for most types of milling and drilling, ideal for all drill stands, drilling, and milling machines.
Rank No. #7
100mm Length Travel Linear Stage Actuator with Square Linear Rails + CBX1605 Ball Screw 1605 Ballscrew Motorized XY XYZ Linear Stage Table with NEMA23 Stepper Motor for DIY CNC Router Milling Machine
  • 【Product Structure Analysis】- Nema23 Stepper Motor+Stepper Motor Connecting Piece+Coupling+1605 Ball Scew+Slide Block+Sliding Table +Bearing Piece+Base.
  • 【Nema23 Stepper Motor】- Motor length: 56mm. Motor flange size: 57mm.  Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 Ω. Inductance: 2.4mH. Rotor Inertia: 440g.cm. Wiring: Red(A+), Green(A-), Yellow(B+), Blue(B-).
  • 【1605 Ball Screw】- Drive type: CBX1605 ball screw. Effective travel length: 100mm. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw rod with precision up to 0.003mm.
  • 【Slide Block】- Length: 60mm. M4 sliding nut design on the side, limit switch can be installed at any position. The slider is made of 6030 aluminum and are oxidized, which is beautiful and generous.
  • 【Main Application】- The important hardware equipment that constitutes industrialized machinery can accurately control the accuracy and speed of the moving parts of mechanical equipment. It is suitable for CNC machine, placement equipment, laser cutting equipment, spraying equipment, medical equipment, battery equipment and other industrial automation fields.
Rank No. #8
ZKGRAND CNC Dust Shoe,90mm(3.54in),White
  • This product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment.
  • It is used to quickly eliminate sawdust and dirt, so as to keep the worktable clean and tidy.
  • Spindle diameter: 90mm / 3.54 inch, vacuum port: 97mm / 3.82 inch,Please confirm the diameter of your router before choosing.
  • The assembly and installation of this product is very simple, and it is easier to replace the drill bit.
  • The brush is easy to disassembly and replace when worn.
Rank No. #9
Ogrmar Milling Drill Worktable Milling Working Table Multifunction Milling Machine Bench Drill (BG6300)
  • The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
  • The working table comes with three T shaped groove, standard size is 15 x 8 x 6mm.
  • Zero adjustment handwheel rotates a circle of 1.25mm. A lattice is equal to 0.05mm.
  • The X axis Y axis distance is 200mm, the stroke is 50mm.Alloy Size: 310 x 90mm x 80mm
  • The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy.
Rank No. #10
500mm Length Travel Linear Stage Actuator with Square Linear Rails + CBX1605 Ball Screw 1605 Ballscrew Motorized XY XYZ Linear Stage Table with NEMA23 Stepper Motor for DIY CNC Router Milling Machine
  • 【Product Structure Analysis】- Nema23 Stepper Motor+Stepper Motor Connecting Piece+Coupling+1605 Ball Scew+Slide Block+Sliding Table +Bearing Piece+Base.
  • 【Nema23 Stepper Motor】- Motor length: 56mm. Motor flange size: 57mm.  Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 Ω. Inductance: 2.4mH. Rotor Inertia: 440g.cm. Wiring: Red(A+), Green(A-), Yellow(B+), Blue(B-).
  • 【1605 Ball Screw】- Drive type: CBX1605 ball screw. Effective travel length: 500mm. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw rod with precision up to 0.003mm.
  • 【Slide Block】- Length: 60mm. M4 sliding nut design on the side, limit switch can be installed at any position. The slider is made of 6030 aluminum and are oxidized, which is beautiful and generous.
  • 【Main Application】- The important hardware equipment that constitutes industrialized machinery can accurately control the accuracy and speed of the moving parts of mechanical equipment. It is suitable for CNC machine, placement equipment, laser cutting equipment, spraying equipment, medical equipment, battery equipment and other industrial automation fields.

Last update on 2022-02-06 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Xy Cnc Table Kit?

Do you get stressed out thinking about shopping for a great Xy Cnc Table Kit? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Xy Cnc Table Kit, which is why we have assembled a comprehensive list of the greatest Xy Cnc Table Kit available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Xy Cnc Table Kit that you consider buying. Your questions might include the following:

  • Is it worth buying an Xy Cnc Table Kit?
  • What benefits are there with buying an Xy Cnc Table Kit?
  • What factors deserve consideration when shopping for an effective Xy Cnc Table Kit?
  • Why is it crucial to invest in any Xy Cnc Table Kit, much less the best one?
  • Which Xy Cnc Table Kit are good in the current market?
  • Where can you find information like this about Xy Cnc Table Kit?

We’re convinced that you likely have far more questions than just these regarding Xy Cnc Table Kit, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Xy Cnc Table Kit, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Xy Cnc Table Kit. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Xy Cnc Table Kit buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Xy Cnc Table Kit currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Xy Cnc Table Kit has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Xy Cnc Table Kit?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Xy Cnc Table Kit.
  5. Customer Ratings: Number ratings grade Xy Cnc Table Kit objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Xy Cnc Table Kit.
  7. Product Quality: You don’t always get what you pay for with an Xy Cnc Table Kit, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Xy Cnc Table Kit is should be an indication of how long it will work out for you.

We always remember that maintaining Xy Cnc Table Kit information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Xy Cnc Table Kit is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: