Contents

The Best boat trailer roller bunks of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best boat trailer roller bunks of 2023. Check our ranking below.

2,770 Reviews Scanned

Rank No. #1

C.e. Smith 5' Roller Bunks

Durable 2" polypropylene rollers on 1/2" shafts mounted in a heavy gauge pre-galvanized channel
Supports up to 1500lbs of well distributed weight
Mounting hardware not included
Sold in pairs

Rank No. #2

Dutton-Lainson Company 6387 4' Galvanized Roller Bunk

Made from 12 gauge steel
Galvanized finish
5 sets of 3 non-marking rubber rollers on each bunk, a total of 30 rollers
Sold in pairs
Makes loading and unloading boat smoother and easier

SaleRank No. #3

CE Smith - Roller Bunk - Durable Roller Bunk for Dry & Difficult Ramps - 4'

Trailer Ramp Assist: Great for ramps where it is not practical to float the boat onto the trailer, makes loading and unloading at small or even dry ramps easy
Durable Boat Accessories: Made of durable 2" polypropylene rollers on 1/2" shafts mounted in a heavy gauge pre-galvanized channel
Strong Roller Bunk for Boat Trailer: Supports up to 1500 pounds of well-distributed weight
Roller Hardware Not Included: Sold in pairs; roller bunk mounting hardware not included
CE Smith Marine Accessories: CE Smith is committed to providing quality trailer and fishing products with responsive customer service

Rank No. #4

Attwood Marine Keel Roller, black, 3" OUTER DIAMETER, 5" LENGTH

Provides reliable protection for a boat’s keel during trailering
Molded rubber construction with nylon inserts
3-inch outside diameter
5 ¼ inches long
5/8-inch shaft diameter

Rank No. #5

ROLLER BUNK 5' HULL SAV'R Galvanized

5 foot long
Terrific replacements for old bunks
Heavy-duty galvanized steel frame
Mounting hardware not included
Requires 4 bolster brackets per pair of roller bunks, bolster brackets sold separately

SaleRank No. #6

VEVOR Boat Trailer Guide-ons, 48", 2 PCS Rustproof Steel Trailer Guide ons, Trailer Guides with Carpet-Padded Boards, Mounting Parts Included, for Ski Boat, Fishing Boat or Sailboat Trailer

Adjustable Width: The width of this boat guide-on can be easily adjusted, extending to 17 inches at most. It fits any trailer frames less than 3" wide and 4-1/4" tall.
Flexible Installation: Our trailer guide-on can be mounted on top of the frame or below it, and the U-bolts fit both large frames and smaller frames.
Solid Construction: These square tubes are made of sturdy galvanized steel and are powder-coated, so they work great against saltwater and do not easily rust.
With Carpet-padded Boards: The two 48" boards covered with carpet can be fixed firmly onto the tubes, and they will prevent the boat from being scratched. Add the frames effortlessly and keep your boat protected.
Wide Application: These trailer boat guides are suitable for ski boats, fishing boats, or sailboat trailers, and it makes loading the boat so much easier.

Rank No. #7

HOMBYS Boat Trailer Bunk Carpet with Backside Adhesive 13ft x 12in, Outdoor Polyester Marine Bunk Carpet for Boats Trailers or Jet Ski Ramps, 1Piece

Backside with Adhesive---Easy to install, comes with adhesive on the back, uncover it and use it directly. No extra glue or staples needed to hold it in place.
Outdoor Marine Bunk Carpet---Preserve the underside of your fishing boat or jet ski with the HOMBYS Boat Bunk Carpet. Boat trailer bunks or marine carpet for boats retains no water, resists weathering & engineered for overall longevity.
Thick & Durable for Protection---Premium boat runner carpet with thicker pile height & strong backing. Protect the underside of your boat/jet ski, boat trailer bunk with the heaviest most durable UV resistant black bunk padding for boat trailers & bunk rail carpet.
Easy to USE---Align black trailer bunk carpet on the board and smooth out creases; Wrap the carpet around the wood allowing a few inches of overhang to each end; Remove the double sided tape to fix it to the wood.
Package Include---13' L x 12" W trailer bunk carpet roll. Excess trailer boat carpet can be used as garage carpet, installed to boat accessories, or fitted on patio furniture; Package includes 1 black roll

SaleRank No. #8

CE Smith - Trailer 10455G Galvanized Roller Bracket Assembly - Sturdy Boating Accessory - 12"

Durable Bracket Construction: Roller bracket made with hot-dipped galvanized steel for corrosion resistance in marine environments
Pre-Assembled Boat Accessory: Includes rollers and 5/8" shafts for easy installation and use
Adjustable Bracket Mounting: Compatible with 12" rollers and can be mounted with 1/2" or 7/16" fasteners
Convenient Roller Design: Mounting slots are on 10" centers for customizable boat trailer setup
CE Smith Marine Accessories: CE Smith is committed to providing quality trailer and fishing products with responsive customer service

SaleRank No. #9

Frienda 4 Pcs 8 Inches Heavy Duty Boat Trailer Roller Robust Rubber Bow Roller Boat Trailer Bow Stop Boat Trailer Accessories Replacement Boat Trailer Parts Black Rubber Shaft Keel

Easy Replacement and Quantity: with 4 pieces included, these boat trailer rollers are easy to replace during use, this ensures that you can quickly and easily maintain the safety performance of the rollers, keeping your boat trailer working efficiently
Quality Rubber Material: these boat rollers are made of quality rubber, ensuring they are hard, robust, and elastic, they are not easy to fray, providing long lasting performance and protecting your boat from scratches
Engineered for Robustness and Compatibility: these trailer rollers are engineered and built with durability and compatibility, they are designed as equipment replacements for most trailers, offering quality performance
Protects Boat Hull: the boat trailer roller assembly is designed to prevent your boat from scraping against bolts or roller brackets, this helps to center the boat during launching or recovering, providing added protection for your boat's hull
Reduces Drag and Versatility: these boat trailer accessories are not affected by oil, gas, or salt, allowing for smooth and easy launching or recovery of your boat, they also reduce drag, enhancing the overall performance and efficiency of your boat trailer

Rank No. #10

HECASA 10 inch Bunk Brackets W/Swivel Tops Bolster for Boat Trailer

【Fitment】:These swivel top bunk bracket can be used on 2 x 4 or 2 x 6 inch bunk board sets. Mounted to cross members in front and behind the axle or mounted to cross members that are C channel in shape and have different dimensions.
【High quality】: The design allows you to adjust the angle to the contour of the boat hull. Premium metal material, professional galvanized craft.
【Dimension】:Standard 10" height, adjustable height and angle, features slotted 1/2 inch diameter holes.
【Package content】：4 x 10" upright brackets, 4 x swivel tops bolsters.
【Superior service】 If there's anything we can do for you, please feel free to tell us.

SaleRank No. #11

Ironwood Pacific E-Z Slide Trailer Pads | Kit 3 | Black

MAKES LAUNCHING AND LOADING YOUR BOAT EASY - E-Z Slide trailer slides mount directly to your bunks to enable your boat to slide smoothly on and off the trailer. Protect the end of the bunks with the BunkEnders.
IDEAL FOR METAL BOATS WEIGHING UP TO 4000 LBS - Works on bunk trailers for pontoon boats, jon boats, fishing boats and all other unpainted aluminum boat styles. Recommended for fiberglass boats weighing up to 1500 lbs.
EASY TO MOUNT - E-Z Slides and BunkEnders attach easily and securely to 2", 4", or 6" trailer bunks with the included stainless steel screws.
CHOOSE FROM 4 KITS - Use the table in the Description (below) or in the photos (left) to quickly determine which EZ-Slides and/or BunkEnder set is right for your specific needs. Available in black or white.
MADE TO LAST - E-Z Slides and Bunk Enders are made in the USA using slick, high-density polymer plastic and are designed to last in a marine environment. Backed by a 5-year manufacturer's warranty.

SaleRank No. #12

Extreme Max 3005.3822 Heavy-Duty Roller Guide-On System

Includes one pair of Heavy-Duty Roller Guide-Ons with an easy, bolt-on installation that fits bunk or roller-style trailer frames up to 3" wide x 4.25" tall*
Custom-formed 97° arms and 13" roller assembly; up to 14" (3" trailer frame) or 16" (2" trailer frame) of horizontal adjustment
Zinc-coated for freshwater use, not intended for use in saltwater or brackish water
The size and shape of trailer frames can vary drastically, please measure your boat on the trailer before ordering to ensure a proper fit
6" bolt kits are available for trailer frames up to 5" tall, see Extreme Max 3005.4065

Rank No. #13

8 inch Keel Roller Assembly Kit with Roller Shaft and Bracket for Boat Trailer Galvanized Steel Black Rubber

Black rubber keel roller:7-5/16" long x 3-3/8" diameter, with 0.65 inch diameter hole.
Galvanized bracket:8-3/16"long x 6-3/16"wide,with 5/8" shaft
Dimensions of mounting slots (each): 1/2" wide x 5" tall.Requires 1/2" or 7/16" fasteners (not included).
Spacing of mounting slots: 6-3/16" apart on center
Made using the finest materials, it is sure to serve you reliably for a long time.

SaleRank No. #14

BISupply Boat Trailer Guides 2 Foot Bunk Boards Kit - 24 Inch Carpeted Guide On Tilting Side Bunks for High Beam, Box or C-Channel Trailers with Mounting Frames and Hardware

[Load Your Boat]: Keep small boats centered during loading with BISupply Boat Trailer Bunk Guide; Load your vessel onto high beam, box, or c-channel trailers
[Quality You Can Trust]: Polyester marine grade carpet is gentle on boats and tough enough to withstand harsh aquatic elements; Tilting boat loading bunks measure 2 x 4 x 24in (5 x 10 61cm)
[Install and Mount]: Boat trailer guide poles are 21 x 1.5in (53 x 4cm); U bolts can be installed straight or crossed and support frames clamp to the top or the bottom of your trailer frame
[Resist the Elements]: Heavy-duty steel construction is designed for marine use; Rely on the boat trailer side bunks to keep your ship securely in place despite heavy wind or bumps
[Package Contents]: Package includes 2 carpeted bunk board guides and 2 mounting frames; U bolts and installation hardware included; Measure your boat on the trailer to ensure a proper fit

Rank No. #15

Caliber Marine Trailer Bunk Slides 23030, 1.5 x 15 inch, 10-Pack Black

A permanent solution to replace carpet on boat, pontoon, and PWC, lifts and trailers
Kit includes 1.5x15-inch in Black, in a 10-pack
300% reduction in loading force means less wear and tear on your boat, trailer and wench
High-impact, durable plastic will not wear, crack, chip or fade, for life; covers 1.5x4-inch boards seamlessly
Made in the USA, limited lifetime warranty

Rank No. #16

HECASA 61" Adjustable Boat Trailer Guide Bunk Board Bunkboard Guide-On Rails Galvanized Steel

【Item type】: HECASA 61" adjustable boat trailer bunk board bunkboard guide-on rails.
【High performance】: Help line up the boat and keep it centered on the trailer, so as to provide convenience to load a large or small boat.
【Quality material】: Bunk board is made of wood wrapped in a blanket; Upright and swivel bracket made from high quality steel, with more solidity & durability. Galvanized surface prolongs the lifespan. Heavy duty construction, easily withstand salt water corrosion.
【Dimension】: Uprights: 1-1/2" square, angled out at 75 Degree; Carpet covered tilted boards: 2'' x 4'' x 60"; Height of 21'' with adjustment out to 13" from frame on each side.
【Package content】: Two (a pair) boards, instruction and everything to install them.

Rank No. #17

Tropic Trailer Set of Four (4) 8" Galvanized Boat Trailer Vertical Bunk Brackets -TWARE001269

8" Galvanized Boat Trailer Vertical Bunk Bracket set of 4

Rank No. #18

JGYHHJ Boat Trailer Bottom Support Bracket with Keel Rollers Ideal for Boats from 2' 7" – 4' Wide

【Scope of application】Maximum capacity: 1763.7 lb
【Ajustable width】The width of the bottom support is adjustable, it is perfect for boats from 2' 7" – 4' wide, which suits both big and small vessels.
【Adjustable angle inclination】The comfortably adjustable tilt angle ensures safe self-centring of the boat - it is automatically centered on the keel roll.
【Durable 】Material: zinc-plated steel，Steel thickness: 0.06"，Weight: 22 lb，this will provide you with a long-term service life.
【High usability】This support bracket, with keel rollers included, can be installed on a boat trailer to support the bottom part of the boat, which makes it indispensable for your trailer and vessel.

Rank No. #19

EZ Loader Trailer Bunk Mounting Bracket Top Hat Style for Boat Trailer.

Mounts boat trailer bunks.
Use with EZ Loader upright support brackets.
Hardware not included.

Rank No. #20

2 Pack Swivel Top Angle Bracket Bolster Bunk Board Adjustable for Boat Pontoon Trailer (2)

2 pack of top angle swivel brackets
For use of mounting bunk boards to your trailer or boat, brackets attach to existing bulk bolster brackets
Made from heavy duty durable galvanized steel and zinc coated to prevent rusting, suitable for all conditions
Top flange holes use a 3/8″ diameter bolt - swivel hole uses a 1/2″ diameter bolt
Fasteners and hardware NOT included

Last update on 2023-08-09 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best boat trailer roller bunks?

Do you get stressed out thinking about shopping for a great boat trailer roller bunks? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching boat trailer roller bunks, which is why we have assembled a comprehensive list of the greatest boat trailer roller bunks available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for boat trailer roller bunks that you consider buying. Your questions might include the following:

Is it worth buying an boat trailer roller bunks?
What benefits are there with buying an boat trailer roller bunks?
What factors deserve consideration when shopping for an effective boat trailer roller bunks?
Why is it crucial to invest in any boat trailer roller bunks, much less the best one?
Which boat trailer roller bunks are good in the current market?
Where can you find information like this about boat trailer roller bunks?

We’re convinced that you likely have far more questions than just these regarding boat trailer roller bunks, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for boat trailer roller bunks, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible boat trailer roller bunks. Make sure that you are only using trustworthy and credible websites and sources.

We provide an boat trailer roller bunks buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available boat trailer roller bunks currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of boat trailer roller bunks has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an boat trailer roller bunks?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your boat trailer roller bunks.
Customer Ratings: Number ratings grade boat trailer roller bunks objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their boat trailer roller bunks.
Product Quality: You don’t always get what you pay for with an boat trailer roller bunks, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an boat trailer roller bunks is should be an indication of how long it will work out for you.

We always remember that maintaining boat trailer roller bunks information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding boat trailer roller bunks is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: How do you attach a roller to a boat trailer?

A: Attach directly to bunk boards or use mounting brackets (sold separately). Channel-style roller bunks upgrade your boat trailer’s standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat.

Q: How big is a boat trailer bunk board?

A: Tie Down Engineering Replacement Boat Trailer Bunk Boards Heavy duty replacement bunk boards come in three sizes: 3′, 4′, and 5′ lengths. Black marine grade carpet provides a smooth surface for your boat to easily slide on or off. Pressure-treated…

Q: What kind of bunk board does wholesale marine use?

A: Wholesale Marine carries replacement bunk boards from Tie Down Engineering. They come in 3, 4, and 5-foot lengths and are made with heavy-duty pressure-treated lumber with black marine carpet already installed. A great solution for smaller watercraft is the CE Smith Roller Bunks.

Q: What are the best bunk pads for a boat?

A: Patriot Docks Bunk Pads Patriot Docks bunk pads are perfect for bunks on trailers or boat lifts. They are designed to help cushion and reduce surface friction between the bunk and the watercraft’s hull. The pads are secured using two screws.