Skip to content

camera splitter

The Best camera splitter of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best camera splitter of 2023. Check our ranking below.

2,435 Reviews Scanned

Rank No. #1
IPCamPower POE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable, Works on All POE Switches, POE NVR and POE Cameras, Mode A and B POE Compatible
  • Allows you to run 1 cable run to the switch for 2 cameras that are near each other, saving on time and material costs. Set consists of a sender "Combiner" unit and a receiver "Splitter" unit. Plug Combiner unit into 2 open ports on your POE switch or POE NVR. Run one long cable to the location that has the cameras that are nearby each other and plug it into the Splitter. Connect 2 short cables to the Splitter unit and connect the other ends to your camera. Done!
  • Reduces cabling costs. Let's say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch or NVR, you can now just run 1. Works great for both new and existing installs. Easy and Cost Effective.
  • Ever installed a camera in a location, only to find out a few days later that you need another camera right by it? What's worse, the switch is on the other side of the building and it took you hours to run that one long cable run. No worries! Just use this splitter set to make your installation much easier and avoid running another long cable.
  • The Splitter Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements. Full IP68 Rating gives this unit the ultimate weather protection and can directly be exposed to rain, sleet, snow, ice, and the sun.
  • Simple plug n play installation. Works with all standard 802.3af/at POE switches and POE NVRs that use standard active POE. Works on most all brands POE Switches, Cameras and POE NVRs. Don't be fooled by other cheaper combiners on the market that only work on POE Switches. IPCamPower's Combiner works on all POE Switches, POE NVRs and POE IP Cameras and supports both Mode A and B POE making it the most flexible and compatible POE Combiner/Splitter on the market.
Rank No. #2
Ethernet Splitter, Waterproof PoE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Network Cable
  • 【Run 2 IP Cameras on 1 Cable】: Allows you to run 1 cable run to the switch for 2 cameras that are near each other. Set consists of a "sender" unit and a "receiver" unit. Plug Sender unit into 2 open ports on your POE switch. Run one cable to the location that has the cameras that are nearby each other. Connect 2 short cables to the Receiver unit and connect the other ends to your camera.
  • 【Reduces Cabling Costs】: Lets say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch, you can now just run 1. Easy and Cost Effective.
  • 【Convenient for Adding Camera】: Ever installed a camera in a location, only to find out that you need another one right by it? Whats worse, the switch is on the other side of the building and it took you hours to run that one cable run. No worries! Just use this splitter set to make your installation much easier as all you need to do now is run 1 cable from the old camera to the new camera.
  • 【Outdoor Waterproof】: The Receiver Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements.
  • 【Easy to Use】:Simple plug & play installation. Only works on standard POE network switches.
Rank No. #3
SOLTECH 8 Way DC Power Supply Splitter for Security Cameras 1 Female to 8 Male 5.5 * 2.1mm 8 Channel Y Adaptor for CCTV Surveillance Cameras (1)
  • SOLTECH's 20 AWG(main cable) Power Splitter Cable offers superior conductivity, resistivity, and transmission stability compared to 22 AWG and 24 AWG cables commonly found on the market. This cable also features a sturdy construction that helps to ensure its long-lasting performance.
  • This 1-to-8 way splitter is ideal for powering multiple cameras or LED strips in surveillance systems or lighting installations. Its robust construction ensures reliable performance and long-lasting durability.
  • High Quality Copper Wire Core, Excellent conductivity, Transmission stability
  • The cable is also designed with a clinched & secure design that ensures a tight fit between the connector and the cable.
  • Cable Length: 15 inches, power adapter DC "Y", 1 Female to 8 Male Connector Size: Outer 5.5mm x Inner 2.1mm
Rank No. #4
TIGERSECU Security Camera Power Adapter with 9-Way Power Splitter, 12V 5A 100V-240V 2.1x5.5mm Power Supply, Compatible with Lorex, Samsung, Q-See, Night Owl, Swann, Annke IP and BNC Cameras
  • This 12V 5A security camera power supply and 9-way power splitter cable can power up to 9 standard analog and HD CCTV security cameras that function under 60 watts (60w).
  • Uses a standard 2.1mm DC power plug, making it a perfect replacement security camera power supply. Compatible with TIGERSECU, Lorex, Reolink, Night Owl, Swann, Defender, ZOSI cameras and more. Contact TIGERSECU's Help Desk to check compatibility with your cameras.
  • Suitable for lower wattage devices of up to 60w, including standard analog and CCTV cameras. This adapter is not suitable for devices requiring higher wattage to run and operate (such as PTZ cameras, DVRs, and NVRs). Do not attempt to power multiple high-wattage devices to this single power supply as this can result in damage.
  • Input voltage: AC 100V-240V 50/60HZ. Output voltage: DC 12V. Max current: 5A.
  • This set includes one 12V 5A 100V-240V power adapter and one 9-way power splitter cable.
Rank No. #5
Fancy Buying Security Camera Power Adapter 12V 5A 100V-240V AC to DC 8-Way Power Splitter Cable FCC Certified LED Power Transformers-Fits Analog/AHD DVR/Camera, RGB LED Strip Lights
  • 12 Volt 5 Amp DC Power Supply Adapter (60 Watts) - Standard High quality power adapter
  • Input:100-240V-1.5A Volts AC 50-60 Hz. Output: 12V DC 5 Amp (12V, 5A)
  • It will run most CCTV cameras etc that require up to 5000mA 12V power
  • This power adapter (transformer) is good for 12V CCTV security camera/DVR/NVR/HVR(analog,AHD,IP), RGB LED strip lights
  • 1 x 8-Way Power Splitter enables you to easily power up to 8 security cameras or 1 DVR with just one plug, no matter it is Analog or AHD

Last update on 2025-07-20 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best camera splitter?

Do you get stressed out thinking about shopping for a great camera splitter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching camera splitter, which is why we have assembled a comprehensive list of the greatest camera splitter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for camera splitter that you consider buying. Your questions might include the following:

  • Is it worth buying an camera splitter?
  • What benefits are there with buying an camera splitter?
  • What factors deserve consideration when shopping for an effective camera splitter?
  • Why is it crucial to invest in any camera splitter, much less the best one?
  • Which camera splitter are good in the current market?
  • Where can you find information like this about camera splitter?

We’re convinced that you likely have far more questions than just these regarding camera splitter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for camera splitter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible camera splitter. Make sure that you are only using trustworthy and credible websites and sources.

We provide an camera splitter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available camera splitter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of camera splitter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an camera splitter?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your camera splitter.
  5. Customer Ratings: Number ratings grade camera splitter objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their camera splitter.
  7. Product Quality: You don’t always get what you pay for with an camera splitter, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an camera splitter is should be an indication of how long it will work out for you.

We always remember that maintaining camera splitter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding camera splitter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: