Contents

20 Best Cnc Spindle Kit of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Cnc Spindle Kit of 2023. Check our ranking below.

2,792 (random number) Reviews Scanned

Rank No. #1

CNC Spindle Motor Kits, 110V 1.5KW Air Cooled Spindle CNC Spindle +110V 1.5KW VFD+Φ65mm Clamp Mount +Collet Set ER11+ Drill bits+ Wires+ Wrenches for CNC Router Machine

【PACKAGE LIST】-1x110V 1.5KW 65mm air Cooled Spindle Motor +1x110V 1.5KW VFD+ 1x Φ65mm CNC Clamp Mount +13x ER11 Collets(1mm-7mm) +10x CNC Router Bits+ 1x aviation wire(We offer 2 meters 18AWG wire in this kit, if you need longer wire, pls buy it in our store)+1xpower wire+2x wrenches
【EASY AND FAST TO ASSEMBLE 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire and power wire, It will take just 5 minutes to install all and make all functions running.
【SPINDLE ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal spindle motor.
【WIDE APPLICATION】-Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem.

Rank No. #2

CNC Spindle Motor Kits,110V 1.5KW ER11 Square Air Cooled Spindle Motor CNC Spindle CNC Motor + 110V 1.5KW VFD + Collets Set ER11+ Wires + Drill Bits+Wrenches for CNC Router Machine

【Package list】 :1pcs 110V ER11 1.5KW Square air cooled spindle motor +1pcs 110V 1.5KW VFD +13pcs Collet ER11(1mm-7mm) + 20pcs Drill Bits+ 2 wires+wrenches
【Easy and fast to assemble 】: Our VFD has been pre-setting up, the spindle is with 8 hole installing holes, we offer complete accessories that make you assemble on your machine very easily and fast.
【Longer woking life】: There are Authentic 4pcs steel bearings comparing with 3 bearings of other suppliers, significantly extend working life 3 times longer than ordinary spindle motor.
【High precision】:We make further processing for high accuracy & concentricity, the runout off of our spindle motor is less than 0.005mm that 10 times precision beyond normal spindle motor.
【Warranty assurance】:We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.

Rank No. #3

LCRHLCNC 110v Spindle Motor Kit，1.5Kw Square Air Cooled Spindle Motor 24000Rpm 400Hz ，VFD Variable Frequency Drive ，7 pcs ER11 Collets （1-7mm）for CNC Router Engraving Milling Machine (1.5KW-110V)

Package include: 1x 110V/1.5KW Square Spindle Motor+1x 1.5KW/110V YL INVERTER+7x ER11 Collets
Specification property：Run out off: less than 0.005mm,spindle speed:0-24000rpm, AC Inverters 50/60hz single phase / 3 phase ，0-400Hz，Inverter input：single phase or Three phase，Inverter inout：Three phase，spindle motor input：Three phase，Bearing is P4 grade, 2x7005C P4 DT, 2x7003C P4 DT, increase spindle life
Main Application: engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board(ABS)and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working.
High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature, improved support stiffness and live spindle grinding accuracy under high-speed rotation.
Notice：don't need to set VFD，please use it directly

Rank No. #4

CNC Spindle Motor Kits, 220V 1.5KW CNC Spindle Air Cooled Spindle Motor+220V 1.5KW VFD+Φ65mm CNC Clamp Mount + ER11 Collet Set+ Drill Bits+Wrenches for CNC Router Mahine

【PACKAGE LIST】-1pcs 220V 1.5KW Φ65mm air Cooled Spindle Motor +1pcs 220V 1.5KW VFD+ 1pcs Φ65mm Clamp Mount +13pcs ER11 Collet(1mm-7mm) +10Pcs CNC Router Bits, 0.8-3mm+ aviation wire+power wire+2pcs wrenches
【EASY AND FAST TO ASSEMBLE 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire and power wire, It will take just 5 minutes to install all and make all functions running.
【SPINDLE ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond average spindle .
【WIDE APPLICATION】-Kinds of engraving and drilling material , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.

Rank No. #5

RATTMMOTOR VFD CNC Spindle Motor Kits 2.2KW 220V Water Cooled Spindle Motor Φ80mm ER20 400Hz 24000RPM+VFD Drive Inverter 3HP+Motor Mount Clamp+14pcs ER20 Collet+80W Water Pump for CNC Router

【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
【80W 220V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 220V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.

Rank No. #6

CNC Spindle Motor Kits, 110V 2.2KW 80mm Water Cooled Spindle Motor CNC motor +110V 2.2KW VFD+Clamp Mount +Water Pump+ Water pipe+ER20 Collet set + Drill bits+ wires+wrenches for CNC Router Machine

【PACKAGE LIST】-1pcs 110V 2.2KW 80mm Water Cooled Spindle Motor +1pcs 110V 2.2KW VFD + 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +1pcs Water Pump+ 5 meters Water pipe+10Pcs CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches
【SPINDLE ADVANTAGE 】-It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond average spindle motor.
【EASY AND FAST TO ASSEMBLE 】-The VFD has been programmed, you don't need to make setting up. We offer pre-soldered aviation wire and power wire, You will take 5 minutes to connect spindle motor with VFD.
【WIDE APPLICATION】-Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.

Rank No. #7

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

🛠️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free).
🛠️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03.
🛠️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle.
🛠️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
🛠️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine.

Rank No. #8

Daedalus CNC Spindle Motor Kit, 500w, ER16, Brushed

★Spindle, 2 Wires-Brushed, 500w, ER16, working voltage 0-100v DC, 0-12000RPM, φ 2.05"
★Enough Power for wood engraving, MDF, plastics, acrilic, plexiglass, foam board.
★Come with PSU, Rheostat, Spindle Clamp, Cable, Butt Terminals and Heat shrink tube.
★Quiet and Efficient, Smooth running, Spin up fast and have minimal vibration.
★Cost-effective, Carbon brushes need to be replaced regularly.

Rank No. #9

CNC Spindle Motor Kit, MYSWEETY 110V 2.2KW Water Cooled Spindle Motor + 2.2KW Single to 3 Phase VDF+110v Water Pump + 3.15 Inch Clamp + 196 Inch Water Pipe + 40 Inch Electric Wire+ 13pcs ER20 Collet

✅【Spindle Technical Parameters】Spec: Φ2.39 x 11.37 in (Diameter: 7.2 cm x Length: 28.9 cm) Power: 2.2 KW; Voltage: 110V; Current: 8.5A; Collet Size: ER20; Bearings: 4 bearings,（2x7005C P4 DT, 2x7003C P4 DT, increase spindle life）Frequency: 400 Hz; Speed: 0-24000 R/min; Runout off: less than 0.0015 mm; Weight: 11.46 ib. Mainly used for engraving machine or used with frequency converter.
✅ 【VFD Inverter】 Power: 2.2 KW; Input Voltage: 110 V; Output Voltage: 110 V; Input Phase: 1 phase or 3 phase; Output Phase: 3 phase; Input Frequency: 50 Hz; Output Frequency: 0-400 Hz; Output Current: 5A. supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect; DC cooling fan low noise, large air volume. Perfect match with the water cooled spindle motor!
✅【Energy-efficient Water Pump】Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60HZ, Size: L4.8xW3.5xH4.3 in. This is a high-performance, save time and effert pump and is well-designed for use in spindle, structure is compact and four powerful rubber suction cups can absorb shock and prevent fall off. The faucet is made of brass: great quality, durable and does not rust.
✅【 Package include】① 1 x 110V 2.2KW Spindle Motor ②1 x 110V 2.2KW VDF Inverter ③1 x 110V 75W Water Pump ④1 x 196 in Water Pipes ⑤1 x 3.15 in Spindle Clamp ⑥2 x Wrench ⑦ 1 x 40 in wire ⑧ 10 x Drill Bits ⑨13 x ER20 Collet Set Gripping Range
✅【 Support】 Covered by 1-year manufacturer warr anty. If you get stuck, contact us with any questions that arise, your satisfaction is important and we'll work to resolve your issues.

Rank No. #10

RATTMMOTOR DC Brushless Spindle Motor Kit, 500W 48V Spindle Motor Air Cooled ER11, 12000RPM, 0.6N.m, 55MM+BLDC Driver Motor Speed Controller 600W Spindle Power Supply+Clamp Mount for CNC Router

【Air Cooled Spindle】Power: 500W; Voltage: 48VDC; Speed: 12000r/min; Torque：0.6NM; Diameter: 55mm.Radial runout off :about 0.01-0.03mm;Insulation resistance: > 2 megohms; Dielectric strength of insulation: 400V.
【Spindle Motor Drvier Features】Compatible with square wave with and without Hall, with potentiometer speed regulation function, external 10V voltage speed regulation function, switch function, speed output function, alarm output function, forward and reverse function, etc., and has a protective shell.
【Spindle Motor Drvier Parameters】Rated voltage: 20-50VDC; Rated current: 10A; Limiting current: 15A; Support speed: support speed above 20000RPM, the specific speed depends on the motor itself and the load.
【DC Switching Power Supply Parameters】Input voltage: 110V / 220V AC; Current: 0-12.5A; Input frequency: 50/60Hz; Power: 600W; output Voltage: DC 48V; Size; 215*115*50mm.
【Advantages-1】The brush is removed, and there is no electric spark generated when the brushed motor is running, which greatly reduces the interference of the electric spark to the remote control radio equipment.

Rank No. #11

110V Spindle Motor Kit，2.2Kw Spindle Motor 24000Rpm 400Hz ，VFD Variable Frequency Drive ，13 pcs ER20 Collets （1-13mm）for CNC Router Engraving Milling Machine

Package include: 1x 110V/2.2KW Square Spindle Motor+1x 2.2KW/110V YL INVERTER+13x ER20 Collets
Specification property：Run out off: less than 0.005mm,spindle speed:0-24000rpm, AC Inverters 50/60hz single phase / 3 phase ，0-400Hz，Inverter input：single phase or Three phase，Inverter inout：Three phase，spindle motor input：Three phase，Bearing is P4 grade, 2x7005C P4 DT, 2x7003C P4 DT, increase spindle life
Main Application: engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board(ABS)and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working.
High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature, improved support stiffness and live spindle grinding accuracy under high-speed rotation.
Notice：don't need to set VFD，please use it directly

Rank No. #12

RATTMMOTOR CNC Spindle Motor Kit 220V, 2.2KW Air Cooled Spindle Motor Square Spindle Motor ER20+2.2KW VFD Inverter 220V Variable Frequency Drive Single to 3 Phase Converter for CNC Router Machine

【Package Include】: ①1 x 2.2KW Square Air Cooled Spindle Motor ②1 x 2.2KW VFD with cable ③1 x ER20 Wrench
【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 6A spindle motor come with a ER20 nut and collet. Frequency is 400HZ, precision tapered bore is less than 0.005mm and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the main shaft cannot only rotate clockwise or counter-clockwise.
【2.2KW VFD】①Parameters: Input Voltage: 220V(+/-15%), Output Voltage: 220VAC, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase, Current: 11A. It provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation.
②Other Fuctions: With over torque and under torque detection; With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.It can also avoid the impact of production due to instantaneous power failure because of instantaneous power-down retention function. What's more, it supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect.
【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number U, V, W. Number U, V, W port are connected with inverter's port U, V, W respectively.

Rank No. #13

Daedalus CNC Brushless Spindle Motor Kit, 500w, ER11, 48V DC, 12000RPM

★Spindle: 3 Wires-Brush-less, 500w, ER11, 48v DC, 0-12000RPM, φ 2-3/16"
★Mach3 control: Support Mach3 control motor after driver upgrade, Reference manual for wiring
★Speed Readout: Come with the LCD display, Real-time read spindle speed
★Quiet and Efficient: Smooth running, Spin up fast and have minimal vibration.
★Cost-effective: Without Brush, maintenance-free, removal dust when necessary

Rank No. #14

FoxAlien CNC Upgrade Kit 300W DC Spindle Milling Motor for Masuter, Masuter Pro, 3018-SE V2 CNC Router Engraving Machine with Integrated Control Box Speed Adjustable

This upgrade kit is designed for FoxAlien Mastuer Pro, Masuter 4040, and 3018-SE V2 CNC router machines. The 300W spindle can directly fit into the spindle clamp of 3018-SE V2. No need to interchange other clamp.
The default input voltage is 110V. The power supply output is 48V. The power supply is integrated into a control box, which is safer and easier to clean. (If you need to use in 220V, pls contact us).
It has a power switch and speed adjust button for convenient operation. Spindle speed can be adjusted manually.
300W spindle can handle hard material more easily such as aluminum and copper. It also improves working efficiency.
It comes with a 1/8” ER11 collet in the spindle.

Rank No. #15

RATTMMOTOR 800W Spindle Motor Kit, 0.8KW 110V ER11 20000RPM 0.79NM Air Cooled DC Spindle Motor+Mach3 Fuction Motor Speed Controller Power Supply Converter AC110V/220V+52mm Mount Clamp for CNC Machine

【Supports Reverse Rotation】As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
【Air Cooled Spindle】Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque：0.79NM; Diameter: 52mm.
【Speed Controller】 Power :800W; Input Voltage: AC100-AC220V±10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast); Support Mach3 Fuction.
【Advantages】This power regulator can adjust 110 or 220v according to customers' needs. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
【Features】With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.

Rank No. #16

CNC 500W Spindle Motor Kit, 500W 0.5KW Air Cooled spindle Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for CNC Engraving CNC milling CNC drilling

【Package include】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x drill bits, 2 x wrenches, 1 x power wire,1 x brush, 1 x fast wire connector.
【Specification】- Operating voltage: 100VDC, Power: 500W, Input: AC110V/220V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03.
【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle.
【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3.175mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.35mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine.
【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.

Rank No. #17

RATTMMOTOR CNC Spindle Motor Kit 110V 2.2KW Water Cooled 80mm Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD 110V Single to 3 Phase Inverter Variable Frequency Drive+Mount Clamp+Water Pump+ER20 Collet

【Package Include】: ①1 x 2.2KW Water Cooled Spindle Motor ②1 x 2.2KW VFD ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W Water Pump ⑤1 x 5m Pipe ⑥1 x ER20 Wrench ⑦14 x ER20 Collet（1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm）
【2.2KW Spindle Motor】: ①This is a 110V-2.2KW water-cooled 15A Φ 80x213mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.02mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
【2.2KW VFD】①Parameters: Input Voltage: 110V(+/-15%), Output Voltage: 110VAC, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase. It provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation.
②Other Fuctions: With over torque and under torque detection; With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.It can also avoid the impact of production due to instantaneous power failure because of instantaneous power-down retention function. What's more, it supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect.
【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 is the ground wire, no wiring is required.

Rank No. #18

RATTMMOTOR CNC Air Cooled Spindle Motor Kit, 2.2KW Spindle Motor 220V ER20 24000RPM+2.2KW VFD 220V Inverter Single to 3 Phase Variable Frequency Drive+80mm Spindle Motor Mount for CNC Router Machine

【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws)
【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.

Rank No. #19

Twotrees CNC 500W Spindle Motor Kit, 12000RPM Air Cooled Bldc Motor with Integrated Control Box speed Adjustment Button, for DIY Engraving, CNC Engraving, CNC Drilling

【CNC Spindle kit】1 x 500W Air-Cooled Spindle Motor, 1 x Integrated Control Box Speed Governor With , 1 x 52mm Mount Bracket, 1x Mounting Connection Plate, 1x Power Wire, 1x Motor Controller Connection Cable, 2 x Hexagonal Wrench, 10 x Screws.
【500W CNC Spindle Motor】Operating Voltage: 100VDC, Power: 500W, Input: AC110V, Idling Speed: 12,000 rev / min, Torque: 0.6N.m. Insulation Resistance:> 2 Megohms, Dielectric Strength: 400V. Motor Length: 200MM, High Precision Spindle Run Out 0.01-0.03.
【High Muality Material】Spindle Motor Bracket Clamp Made of High Quality Cast Aluminum, Robust and Durable, The Power Supply is Integrated Into a Control Box, Which is Safer and Easier to Clean, The Spindle Comes With Forced Air Cooling, Which Can Work For a Long Time.
【DC Switching Power Supply】Input Voltage: 110V / 220V AC, Current: 0-12.5A, Input Frequency: 50/60Hz, Output Voltage: DC 48V, Please Install in the Place That is Draughty, No Dramatic Impact, No Vibration, No Explosion Hazard Medium, No Conductive Metal Particle.
【Meeting Your Needs】500W Spindle Motor Kit is Just the Beginning. Better Engraving Technology can be met by Replacing the Spindle With a Higher Power Spindle or laser Module (not included). If you Encounter any Problems, Please Email US, and we Will Reply Within 24 Hour.

SaleRank No. #20

CNCTOPBAOS 2.2KW Water Cooled Spindle Motor ER20 24000rpm 400Hz+2.2KW VFD Inverter Variable Frequency Driver 110V+80mm Clamp+80W Pump+6m Pipe+14pcs Collet CNC Kit for CNC Router Milling Machine

♞【2.2KW Water Cooled Spindle Motor】Operating Speed:0-24000rpm; Frequency:400Hz; Voltage:110V; Accuracy: 0.003--0.005; Collet size: ER20; Bearings: 4 bearings; Net Weight: 5.2kg;Lubrication:Grease;Current:8.5A;Size:80x200mm
♞【2.2KW Inverter VFD 110V】Input Voltage: 110V(+/-15%) ; Output Voltage 100V-120VAC ; Input Frequency: 48-63Hz ; Output Frequency: 0-400Hz ; Input Phase: Single phase ; Output Phase: Three phase; Output Current: 20A
♞【80mm Clamp】Diameter: 80mm Material: Aluminum,Cast aluminum
♞【80W Water Pump+6M Pipe】Pump length:3.2m; Voltage:105-120VAC with US plug; Flow:3000L/H; Size:150x80x140mm
♞【14Pcs ER20 collet】Full set including 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm

Last update on 2023-08-14 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Cnc Spindle Kit?

Do you get stressed out thinking about shopping for a great Cnc Spindle Kit? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Cnc Spindle Kit, which is why we have assembled a comprehensive list of the greatest Cnc Spindle Kit available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Cnc Spindle Kit that you consider buying. Your questions might include the following:

Is it worth buying an Cnc Spindle Kit?
What benefits are there with buying an Cnc Spindle Kit?
What factors deserve consideration when shopping for an effective Cnc Spindle Kit?
Why is it crucial to invest in any Cnc Spindle Kit, much less the best one?
Which Cnc Spindle Kit are good in the current market?
Where can you find information like this about Cnc Spindle Kit?

We’re convinced that you likely have far more questions than just these regarding Cnc Spindle Kit, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Cnc Spindle Kit, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Cnc Spindle Kit. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Cnc Spindle Kit buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Cnc Spindle Kit currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Cnc Spindle Kit has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Cnc Spindle Kit?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Cnc Spindle Kit.
Customer Ratings: Number ratings grade Cnc Spindle Kit objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Cnc Spindle Kit.
Product Quality: You don’t always get what you pay for with an Cnc Spindle Kit, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Cnc Spindle Kit is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Cnc Spindle Kit information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Cnc Spindle Kit is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is a router spindle?

A: The Router Spindle. So what is the router spindle? Don’t be confused by the “fancy” terminology. The spindle is simple the actual motor doing the cutting, with the help of a cutting tool of course. In other words its the actual router of CNC router .

Q: What is an electric spindle?

A: Spindle Motor Definition. A spindle motor is a small, high-precision, high-reliability electric motor that is used to rotate the shaft, or spindle, on which the platters are mounted in a hard disk drive (HDD).

Q: What is a spindle machine?

A: In machine tools, a spindle is a rotating axis of the machine, which often has a shaft at its heart. The shaft itself is called a spindle, but also, in shop-floor practice, the word often is used metonymically to refer to the entire rotary unit, including not only the shaft itself, but its bearings and anything attached to it (chuck, etc.)