Contents

The Best Comet Clutch Parts of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Comet Clutch Parts of 2023. Check our ranking below.

2,120 Reviews Scanned

Rank No. #1

Complete Torque Converter Go Kart Clutch Kit Set 3/4inch 10T #40/41 and 12T #35 Chain Replacement for 218353A Manco Comet TAV2

Replace Manco Comet TAV2;Recommended engine: within 8.0 HP 212CC engines, 3/4"shaft with flat key
Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
12T sprocket for #35 chain and 10T sprocket for 41/40 chain drive clutch bore 3/4"(19mm)
Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75
Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches

Rank No. #2

MISIOEK Primary Drive Clutch Compatible with Comet 780 Series 1" Bore 1/4" Keyway 302405A

Rank No. #3

MOOSUN 30 Series Torque Converter Driver Clutch 3/4" Bore Go Kart for Comet 219552 5957

This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.
Replacement for Go Karts 30 series Engine Comet Manco, 3/4" bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP
Featuring 6" diameter with 3/4" Bore, 3/16" Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one.
This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load.
Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car.

Rank No. #4

30 Series Torque Converter Clutch, 3/4" Bore with 203589 Go Kart Drive Belt for Compatible with Comet 219552, TAV2 30-75 Manco 5957

✿【30 Series Torque Converter】-- compatible with Comet 219552, TAV2 30-75; Manco 5957; Yerf Dog Q43201W
✿【About Torque Converter】-- 3/4" Bore for 6.5hp 212CC engines, 3/16" Key way, works with 3HP -7HP engines, fit all engines with 3/4" shaft, Application: For Go Kart, Mini Bike, Lawnmower and more
✿【203589 Go Kart Drive Belt】-- compatible with Comet Torq-A-Verter Series, 30 Series; Comet 203589, 203589A, 203589-W1, 203589-W2; Manco 5959, 285B, 286B
✿【Abou Belt】--Length 27 1/32", Width 3/4" Asymetrical Belt, used on the Comet TAV2 bolt on torque-a-verter kit and most Manco, American Sportworks and Ken-Bar karts with 5-7HP engines
✿【Package Includes】-- 1pc 3/4" Bore 30 Series Torque Converter, 1pc 203589 Belt. Non Original Aftermarket Part

SaleRank No. #5

212CC Torque Converter 6.5 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series

【TORQUE CONVERTER DIY MODIFICATIONS COMPATIBLE】DIY Modifications fits for go karts and mini bikes and drift carts, such as BT200X, cx100, ct200u ex, Massimo Baja 200, doodlebug db30, mini-bike, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. Note This is not made by Comet, just the modification replacements for it. Cars mentioned above not included in package.
【REALLY WAKES UP THE BIKE】 This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. DIY modifications to your Mini Bike require some mechanical ability. I'm sure you can do it!
【BRING YOUR OFF-ROAD MACHINE TO LIFE】This TAV2 30 Series Go Kart Clutch Kit fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design.
【A HUGE IMPROVEMENT OVER THE OLD CENTRIFUGAL CLUTCH】This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. On a lighter buggy or drift cart or mini-bike this will SMOKE your old centrifugal clutch.
【30 SERIES TORUQE CONVERTER BELT FOR 6" DRIVEN】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".

SaleRank No. #6

COMET CLUTCH PARTS Torque Converter Spring, Green

215699A 30 Series
Tension Spring for 6" or 7" OD Driven Pulleys

Rank No. #7

MOFANS 1" Bore Driver Clutch Fit for 780 Driver Clutch Comet Salsbury Comet 22 HP 4 Cycle Engines

Fitment: Fit for Comet 94C Salsbury 500 Series and 700 Series Clutchs, 22HP 4 Cycle Engines.
Specification: bore - 1 inch; keyway - 1/4 inch; 1800 rpm engagement.
Direct replacement to replace the original part, durable and long lasting on daily use.
Package Included: 1 " bore driver clutch as picture show.
Note: Before purchase please check specification carefully to confirm this cultch fit your engines.

Rank No. #8

30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4" Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589

【30 Series Torque Converter and Go Kart Drive Belt】：New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4" Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589.
【Torque Converter】：This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series.
【Wide Use--torque converter 3/4】: Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.
【Go Kart Drive Belt】: 30 Series Go Kart Drive Belt torque converter belt Replaces For manco 5959/comet 203589 murray 12-8487 baja Motorsports BB65-395 ken-Bar 300-009 255-299 rotary 8487. Width: 0.4", Length: 27-1/32".
【Wide Use--go kart clutch belt】: The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.

Rank No. #9

780 Series Driver Clutch 1" Bore 1/4" Keyway Comet fit for taking a 1 3/16-1 1/4" wide belt 4 cycle engines, Replace# 302405A / 302405

【Adaptation Model】: This drive clutch fits for Briggs Stratton Vanguards, fits for Kohler Commands, fits for Robin, fits for Honda, fits for Salsbury, fits for CVTech, fits for CVTech Powerbloc IBC and most other 4 cycle engines with crankshafts size listed above.
【Replace Part Number】: 302405A，302405.
【Dimensions 】: 1" bore with 1/4" keyway; It takes a 1 3/16 -1 1/4" wide belt; ( Important: Never run clutch w/o a 1 3/16" - 1 1/4" wide belt installed.)
【High Quality】: Made of high-quality materials, high reliability and durability, have been tested many times before leaving the factory, meet or exceed OE standards, direct fit.
【Easy to Install】: Direct Replaces, fast Install. You can replace old or damaged parts directly.

Rank No. #10

BLACKHORSE-RACING 1" Go Kart Torque Converter CVT Comet Clutch Go Kart Clutch Replaces Comet 219554A 203814A TAV2 30-75 Yerf Dog Manco Mini Bike 10T #40/41/420 Chain

This Go Kart Torque Converter Kit fits a 1" shaft and comes with a 10 tooth sprocket for a #420 /#40 /#41 chain. It will work with small engines producing 8 HP-13 HP
Unit Replaces Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75, Yerf Dog Drive Unit Q43201W
Compatible with most engine with horizontal shaft such as Briggs, Robin, Tecumseh, Hon-da (and clones), Kohler, Clinton, Lifan
This kit comes with a 5/8" Driven Clutch with 6" inner Diamerer, fits all engines with a 1" Straight Crankshaft, replaces Comet, also fits Manco Go Karts, Comet 219554A
Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, and waterski winches

Rank No. #11

BLACKHORSE-RACING 40 Series 1" BORE GO Kart CVT Torque Converter Driver Clutch FIT Comet 40/44 + 3/4'' Driven Clutch Comet Kit + Belt 203785

▲ Engagement Range: 1600-3300 RPM
▲ Application: Can be used on engines with 8-18HP
▲ Fit: Driver clutch fits all engines with a 1" shaft 1/4 " keyway replaces comet 4044 series torqaverter
▲ Replaces Oem Part#: Comet 209133A, 209133, 209139A, 209139, 209151A, 209151 / MANCO 2432; 203015 / 203015A
▲ Package includes: 1 X 1" DRIVER CLUTCH; 1 X 3/4" DRIVEN CLUTCH; 1X Belt: 203785 - 7/8" WIDE X 36 25/32" Cogged & 36 25/32" OD (Don‘t include aluminum pan)

SaleRank No. #12

Comet T.C Belt for Comet TAV2 Clutch 203589A

Asymmetric-type clutch 3/4in W x .40in. thick

Rank No. #13

Jeremywell 30 Series Torque Converter Driver Clutch 3/4" Bore Comet for Go Kart 219552,5957

30 series driver unit with 3/4" Bore
3/4" Bore
3/16" Key way
Asymmetrical

Rank No. #14

MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life.
【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".
【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
【Go Kart Torque Converter Kit comes with】1 x 3/4" Driver Pulley;1 x 5/8" Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware. Note This is not made by Comet

Rank No. #15

MiKaFex 780 Series Black Driver Clutch 1" Bore 1/4" Keyway Comet For Taking a 1 3/16-1 1/4" Wide Belt 4 Cycle Engines Replace#302405A

【Compatible with】：Briggs Stratton Vanguards, Kohler Commands, Robin, Honda, Salsbury, CVTech, CVTech Powerbloc IBC and most other 4 cycle engines with crankshafts size listed above.
【Note】：1" bore with 1/4" keyway; It takes a 1 3/16 -1 1/4" wide belt; Never run clutch w/o a 1 3/16" - 1 1/4" wide belt installed
【Replace Part Number】:302405A，302405
【High Quality】: Our products use high-quality raw materials and undergo rigorous testing.This product is designed to OEM specifications, it can works perfectly with the original model.
【Lifetime Warranty】:Once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems

Rank No. #16

GEATaaT 780 Series Driver Clutch 1" Bore 1/4" Keyway Comet Replace#302405A

【Adaptation Model】This drive clutch for Briggs Stratton Vanguards, Kohler Commands, Robin, Honda, Salsbury, CVTech, CVTech Powerbloc IBC and most other 4 cycle engines with crankshafts size listed above.
【Replace Part Number】302405A，302405.
【Description】1" bore with 1/4" keyway; It takes a 1 3/16 -1 1/4" wide belt; Never run clutch w/o a 1 3/16" - 1 1/4" wide belt installed.
【High Quality】Made of high-quality materials, high reliability and durability, have been tested many times before leaving the factory, meet or exceed OEM standards.
【Perfect service】2 Year Warranty.Friendly return policy and customer service. If you have any questions, please contact us by email, we will reply you within 24 hours.

Rank No. #17

CXRCY Torque Converter 3/4" 10T #40 41 420 Chain 212CC 30 Series Go Kart Mini Bike Clutch Comet TAV2 30-75 Engine Drive Replacement Set

【High Quality Materials】 Our Torque Converter is made of high quality iron and aluminum materials, light weight, durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
【With 1 Tooth Sprocket】 1 x 10 Tooth Sprocket for #40/41/420 Chain.Note:The 10 tooth sprocket already mounted on aluminum plate.
【Widely Fitment] Fits All engines with a 3/4 inch straight crankshaft, Go Karts 30 Series and 2HP-7HP engine with 3/4" Shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.
【Full-Set Equipment】 this kart torque converter kit includes the main parts: a 3/4" driver pulley and a 5/8" driven pulley,and includes other accessories like drive belt,plastic assy cover,aluminum mounting bracket plate,and full mounting hardware kit.
【Replace Part Number】Comet 219552A,203814A,219456A,218353A,TAV2 30-75.

Rank No. #18

Conscripted

Amazon Prime Video (Video on Demand)
IKPONMWOSA AIK ODIASE ONAH CHINYERE OKORIE PREACH BASSEY SUNNY WILLIAMS (Actor)
PAUL APEL PAPEL (DGN) (Director)
English (Playback Language)
English (Subtitle)

Rank No. #19

I Still Play With Blocks Racing Shirt | Maintenance Man Gift T-Shirt

Engine men are intelligent. Are you good at repairing race vehicles? Have your wrenches, screwdrivers, sockets and this cylinder block shirt to begin. This shirt is best for men and women working in big automobile car repair shops and mechanical engineers.
Young boys and girls dreaming to be engineers are apt to use this top. It can be a funny birthday or Christmas present to kids and toddlers who are total toy wreckers. This can also be a nice family shirt in attending a fun mechanical-themed reunion.
Lightweight, Classic fit, Double-needle sleeve and bottom hem

Rank No. #20

30 Series Bore GO Kart CVT Torque Converter 3/4" Bore 6" Diameter Driven Asymmetric Go Kart Mini Bike + 5/8'' Driven Clutch Comet Kit + 725 Belt

Size：ID：5/8''；OD：6'', It will replace Manco 5959, Comet 30 Series Drive Belt #203589, and Kartco #7628. Fits GO KARTS, MINI BIKES, DIRT BIKES, ATV'S, LAWNMOWERS, GENERATORS AND MORE.
30 Series Torque Converter Driver Clutch, 3/4" Bore, Replaces Comet 219552, 5957
Replace Part Number: Comet 219552, Manco 5957, Yerf Dog Q43201W
Perfect replacement driver clutch for small engines with up to 7 HP
Brand new high quality 30 series asymmetrical driven clutch with 3/16'' key way and 3/4'' ID hole. Package Includes: 1X 3/4" Driver Clutch ,1X 5/8" Driver Clutch ,1X 725 Belt

Last update on 2023-08-10 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Comet Clutch Parts?

Do you get stressed out thinking about shopping for a great Comet Clutch Parts? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Comet Clutch Parts, which is why we have assembled a comprehensive list of the greatest Comet Clutch Parts available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Comet Clutch Parts that you consider buying. Your questions might include the following:

Is it worth buying an Comet Clutch Parts?
What benefits are there with buying an Comet Clutch Parts?
What factors deserve consideration when shopping for an effective Comet Clutch Parts?
Why is it crucial to invest in any Comet Clutch Parts, much less the best one?
Which Comet Clutch Parts are good in the current market?
Where can you find information like this about Comet Clutch Parts?

We’re convinced that you likely have far more questions than just these regarding Comet Clutch Parts, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Comet Clutch Parts, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Comet Clutch Parts. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Comet Clutch Parts buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Comet Clutch Parts currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Comet Clutch Parts has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Comet Clutch Parts?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Comet Clutch Parts.
Customer Ratings: Number ratings grade Comet Clutch Parts objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Comet Clutch Parts.
Product Quality: You don’t always get what you pay for with an Comet Clutch Parts, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Comet Clutch Parts is should be an indication of how long it will work out for you.

We always remember that maintaining Comet Clutch Parts information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Comet Clutch Parts is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Are there any comet clutches for go karts?

A: Genuine Comet Clutches and Comet Belts for most brands of go karts and mini bikes. Comet 30 Series, Comet 20 Series, Comet 40 Series, Comet 44 Series, Comet 500 Series, Comet 94C Duster Clutches, Comet TAV2 Complete Kits for 3hp to 8hp engines and Comet 103HPQ. Comet CVT Parts – Comet Industries USA. Tech Support Line 318-925-2224 .

Q: Which is universal 30 series Clutch by Comet?

A: Universal 30 Series™ Asymmetric Drive Belt by Comet®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured… Universal 30 Series™ Asymmetric Driven Clutch by Comet®.

Q: Where is the comet clutches factory in Wisconsin?

A: Certified Parts Corporation (CPC), based in Janesville, Wisconsin, acquired Hoffco/Comet December 17, 2009. All manufacturing is done in our 200,000+ sq. ft. plant in Edgerton, WI.

Q: What kind of snowmobile clutch does Comet make?

A: Universal 40/44 Series Symmetric 7/8″ Wide Belt by Comet®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured… Universal 400 Series™ Clutch by Comet®. Up to 8 HP 4-cycle snowmobiles, bikes, go-karts, etc.