Contents
The Best Cub Cadet Pto Clutch of 2023 – Reviewed and Top Rated
2,199 Reviews Scanned
- Stainless steel brake rivets for a long and safe service life
- Full Control of Clutch Engagement
- Simplified No Linkage Design
- SPEC: 1.00" Crankshaft, 5.923" Pulley, Counter Clockwise, A/B Belt, 80 ft.lbs torque
- replacement for Cub Cadet 917-04163A
- Replace OEM:【Craftsman】 717-04183, 717-04622, 917-04183, 917-04622, 【Cub Cadet】 717-04183, 717-04622, 917-04183, 917-04622, 【MTD】 717-04183, 717-04622, 917-04183, 917-04622, 【Troy-Bilt】 717-04183, 717-04622, 917-04183, 917-04622
- Replace OEM:【Warner】 5219-99, 【White】717-04183, 717-04622, 917-04183, 917-04622【Bolens】 717-04183, 717-04622, 917-04183, 917-04622, 【Huskee】717-04183, 717-04622, 917-04183, 917-04622
- Fits Cub Cadet RZT series, MTD ZT42 ZT50 ZT5000, Troy-Bilt Mustang XP, 2009
- SPECS:Clutch Crankshaft: 1",Pulley Outer Diameter: 5.6",Counter Clockwise, 1/2" or 5/8" Belt, 87 ft. lbs. torque
- Better Dynamic Balance - Spinning Pulley with Reduced Pulley Weight and Lower Energy
- Cool Coil Technology, High Temperature Bearing Upgrade
- Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley
- Upgraded to 3 Layer "Xtreme TOUGH" Integrated, Water Tight Wire Harness
- Specs: 1.000" Crankshaft, 6.000" Pulley, Counter Clockwise, 1/2" or 5/8" Belt, 80 ft. lbs. torque
- OEM: BOLENS 717-04163 OREGON 33-133 WARNER 5217-32
- Stainless steel brake rivets for a long and safe service life
- Full Control of Clutch Engagement
- Simplified No Linkage Design
- SPEC: 1.0" Crankshaft, 6.00" Pulley, Counter Clockwise, 5/8" Belt, 125 ft.lbs torque
- replacement for Cub Cadet 917-04174 917-04174A 717-04174 717-04174A Warner 5219-51 5219-79
- Replaces OEM Part Numbers: Cub Cadet MTD Craftsman Bolens 717-04183, 717-04622, 917-04183, 917-04622
- Fits for RZT Series, Mustang XP 2009 Replaces ogura GT1A-MT09, ZT-42 ZT-50 ZT-5000
- Specs: Shaft Diameter: 1 Inch; Pulley Outer Diameter: 5.43 Inch
- The mower clutch optimizes the performance of the mower deck blades and accessories for high-speed response with improved safety and control.
- Clutches one piece designs that come in pre-set, no adjustments to make. clutch and the brake functions are contained in one single unit taking up a relatively small amount of space
- Replaces OEM Part Numbers: Bolens 717-3385, 717-3385A, 717-3385AP, 917-3385, 917-3385A, 917-3385B, Craftsman 717-3385, 717-3385A, 717-3385AP, 917-3385, 917-3385A, 917-3385B, Cub Cadet 717-3385
- Replaces OEM Part Numbers: Troy-Bilt 717-3385, 717-3385A, 717-3385AP, 717-3385B, 917-3385, 917-3385A, 917-3385B, Warner 5217-14, 5217-42, White 717-3385, 717-3385A, 717-3385AP, 917-3385, 917-3385A,
- Compatible with Cub Cadet GT2542, LT2138; Series: 2000, 2130, 2135, 2138, 2143, 2145, 2146, 2150, 2155
- Compatible with MTD, Bolens, Huskee, White Outdoor GT2542
- Shaft Diameter: 1 Inch; Pulley Outer Diameter: 5.37 Inch; High-Performance Gen 3 8TEN PTO Clutch; 370 Degrees Auto Thermal Cutoff Preventing Clutch Damage; Increased Blade Acceleration with Higher
- HD⚡SWITCH: Engineered Performance
- HEAVY DUTY: Improved 10 AMP OEM UPGRADE (Factory Switch is 5 Amp)
- IMPROVED DESIGN: Water Tight - IP53 Certification
- DURABILITY TESTED: To 200,000 Cycles at 10 AMPS
- PATENTED DESIGN
- FITS THE POWER TAKE OFF CLUTCH - the PTO Clutch fit for Craftsman, for Cub Cadet, for MTD, for Troy-Bilt, for Warner, for White with 717-3389
- ADJUSTABLE WEAR - All PTO clutches can be adjusted for wear. This saves costs and saves end-user downtime. Since the clutch can be adjusted on the machine, the end user can greatly extend the service life of the clutch on the machine.
- OPERATOR CONVENIENCE - Rather than an operator trying to fight against a mechanical linkage or a belt idler, a simple flip of a switch will engage the clutch, resulting in less operator fatigue.
- SIMPLE INSTALLATION - Since the majority of clutches are one piece designs that come in pre-set, there are no adjustments to make either at the mower manufacturer or with the end user. Both the clutch and the brake functions are contained in one single unit taking up a relatively small amount of space.
- ATTENTION - Match the original PTO Clutch perfectly. Please verify the fitment of the part number. If the Power Take Off Clutch ever fails on your machine, please contact us,
- FITS THE POWER TAKE OFF CLUTCH - the PTO Clutch fit for Cub Cadet: FMZ 50, LTX 1042 LTX1045, LTX 1046, LTX1050, RZT 50, RZT 54, Z Force S Series; for MTD for Bolens for Huskee for White Outdoor: FMZ 50, LTX 1042, LTX 1045, LTX 1046, LTX 1050, RZT 50, RZT54, Z Force S Series; for Troy-Bilt: for Mustang XP 2010 2011 2012
- ADJUSTABLE WEAR - All PTO clutches can be adjusted for wear. This saves costs and saves end-user downtime. Since the clutch can be adjusted on the machine, the end user can greatly extend the service life of the clutch on the machine.
- OPERATOR CONVENIENCE - Rather than an operator trying to fight against a mechanical linkage or a belt idler, a simple flip of a switch will engage the clutch, resulting in less operator fatigue.
- SIMPLE INSTALLATION - Since the majority of clutches are one piece designs that come in pre-set, there are no adjustments to make either at the mower manufacturer or with the end user. Both the clutch and the brake functions are contained in one single unit taking up a relatively small amount of space.
- ATTENTION - Match the original PTO Clutch perfectly. Please verify the fitment of the part number. If the Power Take Off Clutch ever fails on your machine, please contact us
- Replaces OEM Part Numbers: Bolens, Cub Cadet, Huskee, MTD, Craftsman, Troy Bilt, White 717-04180, 917-04180; Rotary 12899; Warner 5219-52; Xtreme X0365, X0365-K
- Compatible with Models: Cub Cadet GT2544 Mfg Date K015-K018, GT2550 Mfg Date K015 & Before and K015-K018, GT2554 Mfg Date K015 & Before, LT2042
- High-Performance Gen 3 8TEN PTO Clutch; 370 Degrees Auto Thermal Cutoff Preventing Clutch Damage
- Increased Blade Acceleration with Higher Initial Torque
- Shaft Diameter: 1-1/8 Inch; Pulley Outer Diameter: 6.10 Inch; Anti High & Low Temperature bearing and encapsulated coils (-40 Degrees F to 370 Degrees F) for Consistent Performance
- Replaces OEM Parts: Cub Cadet, MTD, Troy Bilt, White 717-1774, 717-1774B, 717-1774C, 917-05001, 917-1774, 917-1774B 717-05122A, 917-05122A, 717-04552, 717-04552A, 917-04552, 917-04552A, 717-04174
- Replaces OEM Parts: Hustler 601784, 601784K, 604713K, Exmark 127-3410, Toro 112-0913, 119-9057, 112-6044, 127-3410, 119-8941, Ariens, Gravely 00480600, Warner 5219-25, 5219-107, 5219-147, 5219-98,
- High-Performance Gen 3 8TEN PTO Clutch; 370 Degrees Auto Thermal Cutoff Preventing Clutch Damage
- Compatible with: Cub Cadet SLT1550 (2007-2008), SLT1554 (2007-2008), i1042 (2011), i1046 (2007-2008), i1050 (2007-2011), LT1042 (2007-2008), LT1045 (2007-2008), LT1046 (2007-2008), LT1050 (2007-2008),
- Shaft Diameter: 1 Inch; Pulley Outer Diameter: 5.90 Inch
- Factory direct pricing delivers an honest value for hard-earned money
- Specs: Description: Fuel Line, Color: Clear yellow, Ethanol: compatible with/replacement for greater than 10% ethanol fuel, ID: 1/16 ", OD: 1/8 "
- 1-year warranty covers you throughout planting and harvesting seasons
- 100% new Fuel Line meets OEM quality for tractors and farm equipment
- Every Xtreme Clutch has an integrated water tight connection with 3 layers of protection
- Factory direct pricing delivers an honest value for hard-earned money
- Specs: Description: Fuel Line, Color: Clear yellow, Ethanol: compatible with/replacement for greater than 10% ethanol fuel, ID: 1/16 ", OD: 1/8 "
- 1-year warranty covers you throughout planting and harvesting seasons
- 100% new Fuel Line meets OEM quality for tractors and farm equipment
- Every Xtreme Clutch has an integrated water tight connection with 3 layers of protection
- HD⚡SWITCH: Engineered Performance
- HEAVY DUTY: Improved 10 AMP OEM UPGRADE (Factory Switch is 5 Amp)
- IMPROVED DESIGN: Water Tight - IP53 Certification
- DURABILITY TESTED: To 200,000 Cycles at 10 AMPS
- PATENTED DESIGN
- FITS THE POWER TAKE OFF CLUTCH - The PTO Clutch fit for Cub Cadet: RZT-42, RZT-S42(2012 Models); for MTD for Bolens for Huskee for White Outdoor: Colt XP Zero Turn, for Mustang Colt RZT; for Troy-Bilt: Colt XP Zero Turn, for Mustang Colt RZT
- PARAMETER -Crankshaft: 1", Pulley OD: 5.923"; Direction: CCW; Torque: 80lbs; (OEM NUMBER: for Bolens for Cub Cadet for Huskee for MTD for Sears Craftsman for Troy Bilt for White Outdoor: 717-04376, 717-04376A, 917-04376, 917-04376A; for Xtreme: X0399, X0399-K)
- OPERATOR CONVENIENCE - Rather than an operator trying to fight against a mechanical linkage or a belt idler, a simple flip of a switch will engage the clutch, resulting in less operator fatigue.
- SIMPLE INSTALLATION - Since the majority of clutches are one piece designs that come in pre-set, there are no adjustments to make either at the mower manufacturer or with the end user. Both the clutch and the brake functions are contained in one single unit taking up a relatively small amount of space.
- ATTENTION - Match the original PTO Clutch perfectly. Please verify the fitment of the part number. If the Power Take Off Clutch ever fails on your machine, please contact us. All of our OCPTY products are guaranteed for ONE YEAR from the date you order.
- Replaces OEM Part Numbers: Craftsman 717-04080, 917-04080, Cub Cadet 717-04080, 917-04080, MTD 717-04080, 917-04080, Troy-Bilt 717-04080, 917-04080, Warner 5215-142, White 717-04080, 917-04080
- Fits Cub Cadet GT1222, LT1022, LT1024, LT1045 2007 & Before; MTD Bolens Huskee White Outdoor LT-2200
- High-Performance Gen 3 8TEN PTO Clutch; 370 Degrees Auto Thermal Cutoff Preventing Clutch Damage
- Permanent Magnet / Spring Brake System: Stop time about 20% better than Gen.2 clutches
- Shaft Diameter: 1 Inch; Pulley Outer Diameter: 6.10 Inch; Anti High & Low Temperature bearing and encapsulated coils (-40 Degrees F to 370 Degrees F) for Consistent Performance
- Fits: i1042 i1046 i1050 LGT1050 LGT1054 LGTX1050 LGTX1054 LT1045 LT1046 LT1050 LTX1042 LTX1045 LTX1046 LTX1050 SLT1550 SLT1554 Super LT1550 LT1554 SLTX1050 SLTX1054 PYT9000 Q92GP TB2450 GT950H LT5000 LT950H YT950H, 14AA80TP766 14AA80TP711 Big Red Horse, 13AP61KP011 Horse, 14AP80TP766 Big Red GT50, 13AP60TP766 Horse, 13AB606H730, 13AP605H755, 13AP615P755, 13AU615P755
- Fits: 13AA625P004, 13AA925P004, 13AP60TP090, 13AP60TP290, 13AP616G597, 13AP616G597, 13AP616H597, 13AP616P790, 13AP61KP011 Horse, 13AP925P004, 13AQ626P597, 13AQ62GP897, 13AQ92GP897, 13AR91PP099 247.289810, 13AV606G597, 13AV616G597, 13WQ92KP066, 14A9816P790, 14AQ816H597, 14AQ816K597, 14AQ81GH897, 14AQ81GK897, 13AQ91GP897, 13AR606P730, 14AK811P705, 13AA625P004, 13AQ611H705
- Replaces OEM Part Numbers: 91704174A, 917-04174A, 917-04174, 717-04174, 71404174 & 5219-51, 5219-64, 5219-79, 521951, 521964, 521979
- Tough Billet Pulleys: Billet Pulleys Reduce Belt Wear and Maintain Perfect Blade Speed. Our Billet Pulley Design uses a Snap Ring and Allows for Bearing Replacement. Premium C3 Bearings: HD Designed and Spec’d these bearings with C3 Clearances, Premium High Temperature Grease and on Most Models a Larger Tougher Bearing.
- High Torque Coil: Higher Torque Means this Clutch holds Strong Even in the Toughest Cuts. Cool Coil Technology: We use a Proprietary Composite Material Instead of Plastic. This Allows the heat to Escape the Clutch Faster. Less Heat = Longer Life
- HD⚡SWITCH: Engineered Performance
- HEAVY DUTY: Improved 10 AMP OEM UPGRADE (Factory Switch is 5 Amp)
- IMPROVED DESIGN: Water Tight - IP53 Certification
- DURABILITY TESTED: To 200,000 Cycles at 10 AMPS
- PATENTED DESIGN
- Xtreme Torque Series, High Torque Cool Coil Upgrade, Heavy Duty "FatBoy Series" Upgrade
- Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley
- Upgraded to 3 Layer "Xtreme TOUGH" Integrated, Water Tight Wire Harness
- Specs: 1.125" Crankshaft, 6" Pulley, Counter Clockwise, A/B Belt, 150 ft. lbs. torque
- OEM: BOLENS 717-3403 OREGON 33-123 WARNER 5218-6
- HD⚡SWITCH: Engineered Performance
- HEAVY DUTY: Improved 10 AMP OEM UPGRADE (Factory Switch is 5 Amp)
- IMPROVED DESIGN: Water Tight - IP53 Certification
- DURABILITY TESTED: To 200,000 Cycles at 10 AMPS
- PATENTED DESIGN
Last update on 2023-07-30 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Cub Cadet Pto Clutch?
Do you get stressed out thinking about shopping for a great Cub Cadet Pto Clutch? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Cub Cadet Pto Clutch, which is why we have assembled a comprehensive list of the greatest Cub Cadet Pto Clutch available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Cub Cadet Pto Clutch that you consider buying. Your questions might include the following:
- Is it worth buying an Cub Cadet Pto Clutch?
- What benefits are there with buying an Cub Cadet Pto Clutch?
- What factors deserve consideration when shopping for an effective Cub Cadet Pto Clutch?
- Why is it crucial to invest in any Cub Cadet Pto Clutch, much less the best one?
- Which Cub Cadet Pto Clutch are good in the current market?
- Where can you find information like this about Cub Cadet Pto Clutch?
We’re convinced that you likely have far more questions than just these regarding Cub Cadet Pto Clutch, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Cub Cadet Pto Clutch, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Cub Cadet Pto Clutch. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Cub Cadet Pto Clutch buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Cub Cadet Pto Clutch currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Cub Cadet Pto Clutch has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Cub Cadet Pto Clutch?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Cub Cadet Pto Clutch.
- Customer Ratings: Number ratings grade Cub Cadet Pto Clutch objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Cub Cadet Pto Clutch.
- Product Quality: You don’t always get what you pay for with an Cub Cadet Pto Clutch, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Cub Cadet Pto Clutch is should be an indication of how long it will work out for you.
We always remember that maintaining Cub Cadet Pto Clutch information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Cub Cadet Pto Clutch is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: Why do you need genuine Cub Cadet parts?
A: Cub Cadet Genuine Parts gives you a genuine advantage: the confidence of using parts specifically designed for a exact fit, optimal performance and maximum safety. These are the only parts with the in-depth engineering and rigid testing that assures long-lasting quality.
Q: What kind of engine does Cub Cadet lawn mower have?
A: Commercial-grade dual Hydro-Gear® ZT-3200 hydrostatic rear-wheel transmissions for quick and effortless up to 8.5 MPH forward and 3.5 MPH reverse zero-turn controlled ground speeds. Equipped with a powerful 23 HP KOHLER 7000 Series PRO V-twin OHV engine for reliable starting and exceptionally smooth, quiet operation.
Q: What kind of transmission does Cub Cadet ZT3 have?
A: Commercial-grade dual Hydro-Gear® ZT-3100 hydrostatic rear-wheel transmissions for quick and effortless up to 7.5 MPH forward and 3.5 MPH reverse zero-turn controlled ground speeds.