The Best Curt 13535 of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Curt 13535 of 2023. Check our ranking below.
2,677 Reviews Scanned
Rank No. #1
CURT 13535 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda CR-V, GLOSS BLACK POWDER COAT
- DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
- FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
- RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
- EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda CR-V. Material-Carbon Steel
Rank No. #5
CURT 45036 Trailer Hitch Mount with 2-Inch Ball & Pin, Fits 2-in Receiver, 7,500 lbs, 2" Drop, GLOSS BLACK POWDER COAT
- DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed)
- VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-inch diameter ball, 5/8-inch pin hole and 8-1/4-inch overall length
- READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver
- CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating
- EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy
Rank No. #6
CURT 13040 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Select Chevrolet Express, GMC Savana, Black
- DEPENDABLE STRENGTH. This trailer hitch is rated for 6,000 lbs. gross trailer weight, 600 lbs. tongue weight, 10,000 lbs. weight distribution capacity and 1,000 lbs. weight distribution tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
- FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
- RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
- EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Chevy Express 1500, 2500 or 3500 and GMC Savana 1500, 2500 or 3500
SaleRank No. #7
CURT 56040 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Subaru Ascent, Forester, Outback, Crosstrek, XV , Black
- EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer
- STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle
- VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Subaru Ascent, Forester, Outback, Crosstrek and XV Crosstrek (factory tow package required)
- RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance
- DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements
Rank No. #8
CURT 58300 Vehicle-Side Trailer Wiring Harness Mounting Bracket for 4-Way Flat, GLOSS BLACK POWDER COAT
- STANDARD FIT. This trailer wiring mounting bracket is designed to securely mount virtually any industry-standard 4-way flat connector
- FLEXIBLE MOUNTING. The bracket features a simply friction fit design to accept a variety of trailer wiring harnesses. It allows you to mount the wiring harness onto your vehicle or trailer hitch, whichever is most convenient
- HIGH-STRENGTH. This trailer wiring harness bracket is made from solid steel to provide plenty of strength for a solid mount and to remain fixed in spite of vibrations while towing. The steel body will not crack like plastic alternatives
- CORROSION-RESISTANT. To face the weather and elements with ease, this trailer wiring bracket is covered in a black powder coat finish, helping to resist rust for long-lasting strength
- EASY TO INSTALL. To install this mounting bracket for vehicle-trailer wiring, you can bolt it directly onto your vehicle using the top screw holes, or you can pair this bracket with the CURT 57204 for a convenient, no-drill, tube clamp mount
Rank No. #9
CURT 57672 Dual-Output 4-Way Flat Vehicle-Side to 7-Way RV Blade Trailer Wiring Adapter , Black
- VERSATILE DESIGN. This dual-output trailer wiring adapter makes it easy to tow different trailers with your vehicle, equipping it with a standard 7-way RV blade socket while retaining use of the existing 4-way flat wiring.Fit Type: Universal Fit
- WEATHER-RESISTANT. This trailer wiring harness adapter comes with dust covers for the 4-pin and 7-pin wiring sockets to protect the terminals from water, dirt and corrosion. The wiring harness is also well-protected with the included slit loom sleeve
- STANDARD CONNECTION. This trailer hitch wiring adapter plugs into any standard 4-way flat and can be used to connect the taillights, brake lights, turn signals, reverse lights, trailer brakes and auxiliary power (some splicing required)
- EASY TO INSTALL. This dual-output 4-pin to 7-pin trailer adapter wiring comes ready to plug into your vehicle or trailer wiring with minimal splicing required. It also includes a mounting bracket for convenient attachment to your hitch or bumper
- DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this trailer harness adapter is made from durable black plastic that will never rust or corrode
Rank No. #10
CURT 13068 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda Odyssey, GLOSS BLACK POWDER COAT
- DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight, 350 lbs. tongue weight, 5,000 lbs. weight distribution capacity and 500 lbs. weight distribution tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
- FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
- RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
- EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda Odyssey
SaleRank No. #11
CURT 58000 Easy-Mount Vehicle Trailer Wiring Connector Mounting Bracket for 2-Inch Receiver, 4 or 5-Way Flat, 6 or 7-Way Round, GLOSS BLACK POWDER COAT
- Allows connectors to be hitch-mounted on virtually any 2" x 2" trailer hitch receiver tube with no drilling or clamping required (US patent #9,016,707)
- Accepts 4-way or 5-way flat and 6-way or 7-way round connector sockets
- Two threaded bolts ensure a fast, secure hitch mount
- Notched design allows convenient access to pin & clip
- Steel body will not break like competitive plastic products, and it is protected by a durable powder coat finish. Slotted screw holes to fit multiple connector types
Rank No. #12
CURT 17500 TruTrack Weight Distribution Hitch with Sway Control, Up to 10K, 2-In Shank, 2-5/16-Inch Ball, Black
- ACTIVE SWAY CONTROL. The TruTrack doesn't just level the vehicle and trailer. It also actively resists trailer sway. It uses a spring and cam system and fixed support brackets to stop trailer sway at four distinct points for a smoother, safer ride.Fit Type: Universal Fit
- PRECISE WEIGHT DISTRIBUTION. The TruTrack weight distribution hitch with sway control offers precise levelling of your tow vehicle and trailer. It uses powerful 35-9/16-inch trunnion spring bars and an adjustable shank that fits a 2-inch receiver
- EASY SETUP. This CURT weight distribution hitch with trailer sway control is designed for fast, easy setup and adjustment. It features a tilting head with hex castle nuts for easy adjustment without completely disassembling the hitch
- HIGH-STRENGTH. For dependable towing strength, this weight distribution and anti-sway hitch is constructed with a welded head and cast steel pieces. This stabilizer hitch is rated for 8,000 to 10,000 lbs. GTW and 800 to 1,000 lbs. TW
- CORROSION-RESISTANT. This weight distribution hitch with sway control is finished with a highly durable carbide black powder coat to withstand the rigors of the outdoor elements
Rank No. #13
CURT 51180 Echo Mobile Electric Trailer Brake Controller with Bluetooth-Enabled Smartphone Connection, Proportional, Black PLastic, 9 x 9 x 3 inches, BLACK PLASTIC
- PORTABLE. The Echo trailer brake controller has a non-invasive install and is easily transferrable from one vehicle to another. It plugs into any 7-way connector, wirelessly links to your smartphone using Bluetooth
- SMARTPHONE-READY. The Echo brake controller wirelessly syncs with your Apple or Android phone, turning it into a brake controller interface with the Smart Control app (Warning: Avoid distracted driving. Only make adjustments when vehicle is stationary). Note: If Bluetooth connection is lost, the brake controller will continue to function safely, using the most recently programmed settings
- ZERO-TOOL INSTALL. Installing this trailer brake controller is as easy as plugging in a 7-way trailer wiring connector. It requires no tools, no extra wires and no hardware. A locking tab and strap keep it firmly connected. NOTE: Strap stored inside cap
- HIGHLY RESPONSIVE. Echo uses a triple-axis accelerometer to provide smooth, safe braking. It maintains responsive braking, even when your phone screen is locked, receives incoming calls or if the Bluetooth connection is lost
- VERSATILE. This electronic trailer brake controller easily transfers between vehicles and trailers and works on virtually any trailer with 1 to 2 axles (2 to 4 brakes). It is also fully compatible with cruise control, anti-lock brakes, low-voltage systems
Rank No. #14
CURT 45331 Trailer Hitch Mount with 2-5/16-Inch Ball & Pin, Fits 2-Inch Receiver, 15,000 lbs, 2-In Drop
- DEPENDABLE STRENGTH. Rated to tow 15,000 pounds gross trailer weight and 1,500 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed)
- VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-5/16-inch diameter ball, 5/8-inch pin hole and 8-1/2-inch overall length
- READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling
- CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating
- EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank and pre-torqued trailer ball make installation easy (hitch pin sold separately)
SaleRank No. #15
Curt Manufacturing 55243 Vehicle-Side Custom RV Blade 7-Pin Trailer Wiring Harness,Fits Select Ford F-250,F-350,F-450,F-550 Super Duty
- Simple plug and play design eliminates the need for cutting or splicing
- Includes converter where needed
- 7-way flat output
- Comes with a dust cover to keep your connector clean when not in use
- Made in USA
Rank No. #16
CURT 13534 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Select Toyota Highlander , Black
- DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
- FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.Drilling not required
- RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
- EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Toyota Highlander
SaleRank No. #17
CURT 58301 Vehicle-Side Trailer Wiring Harness Mounting Bracket for 4-Way Flat GLOSS BLACK POWDER COAT
- STANDARD FIT. This trailer wiring mounting bracket is designed to securely mount virtually any industry-standard 4-way flat connector
- FLEXIBLE MOUNTING. The bracket features a simply friction fit design to accept a variety of trailer wiring harnesses. It allows you to mount the wiring harness onto your vehicle or trailer hitch, whichever is most convenient
- HIGH-STRENGTH. This trailer wiring harness bracket is made from solid steel to provide plenty of strength for a solid mount and to remain fixed in spite of vibrations while towing. The steel body will not crack like plastic alternatives
- CORROSION-RESISTANT. To face the weather and elements with ease, this trailer wiring bracket is covered in a black powder coat finish, helping to resist rust for long-lasting strength
- EASY TO INSTALL. To install this mounting bracket for vehicle-trailer wiring, you can bolt it directly onto your vehicle using the top screw holes, or you can pair this bracket with the CURT #57204 for a convenient, no-drill, tube clamp mount
SaleRank No. #18
CURT 56083 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Lexus RX350, RX450h , Black
- EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer
- STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle
- VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Lexus RX350 and RX450h (factory tow package required)
- EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging
- DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements
Rank No. #19
CURT 18153 60 x 24-Inch Basket Hitch Cargo Carrier, 500 lbs Capacity, Black Steel, 2-In Folding Shank
- ENHANCED SECURITY. This trailer hitch cargo carrier keeps your items secure during travel, featuring 6-inch high walls around the cargo basket. These walls can be used to fasten a cargo net or cargo bag
- ADAPTABLE. This cargo hitch carrier is equipped with a folding, angled shank. The folding feature allows the cargo carrier to be folded up when not in use, and the angled shank provides additional ground clearance
- EASY TO CLEAN. This hitch mounted cargo carrier frees up cargo space inside your vehicle and keeps messy items outside your vehicle. It also features a mesh base to easily clean up messes
- INTEGRATED SAFETY. With integrated reflectors on the frame, this hitch cargo rack promotes a safe ride. The reflectors add visibility to the cargo carrier and your vehicle
- DURABLE BUILD. This trailer hitch cargo carrier is constructed from tubular steel to promote high strength and a lightweight design. It is rated for 500 lbs. It is also finished with an E-coat and carbide black powder coat
Rank No. #20
CURT 13043 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Lexus GX460, GLOSS BLACK POWDER COAT
- DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight, 500 lbs. tongue weight, 5,000 lbs. weight distribution capacity and 500 lbs. weight distribution tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
- FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling
- RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays
- EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Lexus GX460
Last update on 2023-08-14 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Curt 13535?
Do you get stressed out thinking about shopping for a great Curt 13535? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Curt 13535, which is why we have assembled a comprehensive list of the greatest Curt 13535 available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Curt 13535 that you consider buying. Your questions might include the following:
- Is it worth buying an Curt 13535?
- What benefits are there with buying an Curt 13535?
- What factors deserve consideration when shopping for an effective Curt 13535?
- Why is it crucial to invest in any Curt 13535, much less the best one?
- Which Curt 13535 are good in the current market?
- Where can you find information like this about Curt 13535?
We’re convinced that you likely have far more questions than just these regarding Curt 13535, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Curt 13535, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Curt 13535. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Curt 13535 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Curt 13535 currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Curt 13535 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Curt 13535?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Curt 13535.
- Customer Ratings: Number ratings grade Curt 13535 objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Curt 13535.
- Product Quality: You don’t always get what you pay for with an Curt 13535, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Curt 13535 is should be an indication of how long it will work out for you.
We always remember that maintaining Curt 13535 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Curt 13535 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.