20 Best Cutech 40160H Ct 6 Jointer of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best Cutech 40160H Ct 6 Jointer of 2023. Check our ranking below.
2,707 Reviews Scanned
- Spiral Cutterhead - Cutterhead with 6 rows that holds 16 staggered inserts for a smooth finish. The design of the cutterhead along with the use of in-house made inserts make cuts with the lowest amp draw compared to others.
- Two-sided Inserts - Two-sided inserts sit in perfect alignment to the spiral cutterhead. Non-cutting edge designed to prevent insert from skewing while planing. The precision is superior to 4-sided inserts.
- Fence Enhancement Brackets - Fence enhancement brackets stabilize both ends of the fence for a flawless cut. (Patented in Taiwan.)
- Elevation Control - Say goodbye to table inconsistencies with the additional guide post. Parallel tables translate to straight cuts at any different depth.
- Additional Support Rod System - Additional support rod system maintaining a strong upright frame. Sustaining support for heavy-duty work pieces.
- 14.3mm Carbide inserts Cutter kit Knives 2 Cutting Edges
- Standard Size-14.3mm(length)X14.3mm(width)X2.0mm(thickness) square straight with 2 edges,50 degree cutting angle
- Most Convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness. Easy to operate,each blade has 2 sharp edges,if one is dull, just change it to the other side, Carbide cutter Corners are very sharp with virtually no radius Best choice for turning straight profiles and nearly 90° inside corners
- Replacement for Rikon 25-130H,20-600H, 25-131H, King KC-13HPC, Craftex CX Series CX125HC CX08BTHC , Cutech Spiral Cutterhead Planer
- for Cutech Tool Planer Jointer 40700H-CT 4700HC-CT 40100H-CT 40600H-80100-CT 40200H-CT 40600HC-80100-CT 40200HC-CT Head
- Spiral Cutterhead - Six-sided cutterhead that holds 16 staggered inserts for a smooth finish
- Depth of Cut Indicator - Red pointer correlates with how low the infeed table is lowered to see the amount of material to be taken off
- Extendable Tables - Versatile 16.5" tables that extend for an additional support up to 25.25"
- Multi-Angle Adjustable Aluminum Fence - Helps guide board through with preset 90 and 45 angles
- 6H teflon Coating Table - This layer of protection reduces table scratches, increases the hardness of the table to 6H, thus extending the life of the tables
- Standard Size-14.3mm(length)X14.3mm(width)X2.0mm(thickness) square straight with 2 edges,50 degree cutting angle
- Most Convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
- 10 pieces per box,packed with a plastic container for safe and easy storage
- Easy to operate,each blade has 2 sharp edges,if one is dull, just change it to the other side
- Carbide cutter Corners are very sharp with virtually no radius Best choice for turning straight profiles and nearly 90° inside corners
- Motor: 1-1/2 HP, 120V, Single-Phase, 10A
- Maximum with of cut: 6 in.
- Maximum depth of cut: 1/8 in.
- Cutterhead type: spiral-style with 12 inserts
- Cutterhead speed: 12,000 RPM
- Spiral Cutterhead - Cutterhead with 6 rows that holds 12 staggered inserts for a smooth finish.
- Cast Iron Tables - Durable cast iron tables for a consistent quality finish every time. Surface is ground smooth and precise to a flatness of 0.15mm in tolerance. The increased hardness of cast iron provides a strong support while providing a more scratch resistant finish.
- Depth of Cut - The easy to read depth of cut scale with red pointer correlates with how low the infeed table is lowered to see the amount of material to be taken off.
- Multi-Angle Adjustable Aluminum Fence - Helps guide board through with preset 90 and 135 angles.
- Size: Standard
- 100% polyester fabric & fiberfill; 100% polyurethane foam
- Foam-backed forehead panel attached to fabric-covered plastic headband
- Forehead panel has fiberfill-stuffed horns, eyeball, & eyelid
- Eyeball has embroidered iris & pupil
- Spiral Cutterhead - Six-sided cutterhead that holds 12 staggered inserts for a smooth finish
- Depth of Cut Indicator - Red pointer correlates with how low the infeed table is lowered to see the amount of material to be taken off
- Multi-Angle Adjustable Aluminum Fence - Helps guide board through with preset 90 and 135 angles
- 6H Teflon Coating Table - This layer of protection reduces table scratches, increases the hardness of the table to 6H, thus extending the life of the tables
- No More Cupped Woods. Create perfectly flat surfaces and edges quickly and hassle-free with the Wahuda Jointers. Experience smoother and accurate cuts even on tough or figured woods w/ Wahuda Tools.
- Cutting-Edge Sharpness. Our spiral cutterhead has 4-sided carbide inserts for sharper and quieter cutting precision. The standard blade size also allows for a cost-effective and simple replacement.
- Capable Steady Performance. Wahuda Jointers are powered with a 120V motor with a fixed 12,000 RPM. They are fully capable of handling edging, jointing, flattening, or tapering no matter the surface!
- Solid Built For Your Convenience. Our adjustable and expandable cast iron tables enhance stability even when working on longer, larger pieces, with a fence that tilts from 90 &135° for versatility.
- Perfect For Job Sites Or Small Shops. Depending on your needs or your shop’s size, Wahuda Tools have 6, 8, and 10-inch wood jointers that will do the job right. They’re conveniently movable, too!
- Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish
- Features a spacious 30-by-6-inch table
- Remove 0 to 1/8 of an inch of material with each pass
- Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees
- RIKON BENCHTOP JOINTER - This 6” becnhtop jointer has a 6 row helical-style cutter head with 12 HSS, 2-insert cutters for super cutting action.
- HIGH SPEED - With a powerful 10 AMP motor, this benchtop jointer also features a high speed steel insert knives and a large 30” x6-3/16” table.
- ALL STEEL CONSTRUCTION - Made from rigid, all-metal construction, machined aluminum tables, a quick depth setting mechanism with scale, adjustable fence that tilts from 90 degrees to 45 degrees quickly and accurately.
- SEE RESULTS - This benchtop jointer also has a spring loaded safety guard and a front on/off switch. You will see results when using this benchtop jointer.
- Standard Size-14.27mm(length)X14.27mm(width)X2.0mm(thickness) square straight with 2 edges,50 degree cutting angle
- Most Convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
- 10 pieces per box,packed with a plastic container for safe and easy storage
- Easy to operate,each blade has 2 sharp edges,if one is dull, just change it to the other side
- Carbide cutter Corners are very sharp with virtually no radius Best choice for turning straight profiles and nearly 90° inside corners
- True helical cut with 14 indexable four-sided carbide blades
- Heavy-duty cast iron tables and fence
- Fully-adjustable fence with locking stops at plus /- 45 degree tilt dual direction for beveling
- Internal blower motor moves dust and chips away from motor and cutter head
- Powerful 1HP 15-amp motor turns the cutterhead at 10,000 RPM
- Standard Cutter Size: 14.3mm square with straight corners 2mm thick,2 indexable cutting edges, 50 degree cutting bevel. Inserts are used on planers/jointers with helical cutterheads.
- Made of Premium K10 grade solid tungsten carbide, double life-time than general carbide cutters, and had been increased 30% hardness by our high temperature quenching.
- Each cutter has 2 indexable sharp edges, if one is dull, no more sharpening, just turn to another edge which greatly reduces you down time. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely.
- The inserts had been high precision polished, which increased the oxidation resistance and corrosion resistance of the cutter, combined with optimal grinding process to produce the flattest and truest cutting surfaces.
- What You Get: Pack of 10 14.3 x 14.3 x 2mm square straight replacement carbide cutters, 10 pcs of professional M6 screws, our worry-free 12-month warranty, and friendly customer service. TJATSE committed to give Best Selection for your woodworking job.
- Variable Speed
- Center Mounted Fence
- Extra-Large 6-3/16" X 30" Table
- Two-Knife, Ball Bearing Cutterhead
- Built In Cutterhead Lock
- INCLUDES: (3) Jointer Knives 6" - Premium cutting tools for woodworking applications
- COMPATIBILITY: Intended for Delta 37-658, 37-190, 37-195, 37-205, 37-220, 37-275X | JET 708457K, JJ-6CS
- FEATURES: Each jointer cutting knife possesses a single cutting edge with a profile specially designed for smooth and fast cutting action (without tear outs) that consistently delivers high precision and professional looking results
- HIGH SPEED STEEL: HSS jointer blades allow you to cut hard woods, boards and other material at higher speeds with hardened sharpness, temperature protection and wear resistance for long term durability
- DIMENSIONS: Length 6-1/16" x Width 11/16" x Thickness 1/8"
- Spiral cutterhead system utilizes 16 staggered HSS blades for an ultra fine finish
- Features a spacious 33-by-8-inch table with support arms that extend up to 51 inches
- Remove 0 to 1/8 of an inch of material with each pass
- Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees
- 6-1/8-Inch Jointer Knives for Ridgid JP06000, JP0610, JP06101
- Also fits JET JJ-6, JJ-6OS, JJ-6CS & JJ-6CSX, replaces 708801 70845K, Powermatic 54A
- Also fits Craftsman 113-206932 & 113-206891
- 2 Set(6 Pcs), Plastic case packaging
- Blade dimension: 6-1/8-Inch x 11/16-Inch x 1/8-Inch
- Variable 6,000 to 11,000 RPM speed range allows the user to select the right speed for the size and hardness of material being cut
- Two knife cutter head with jack screw knife leveling arrangement for easy replacement and adjustment of knives
- Built-in cutter head lock facilitates knife replacement and adjustment
- Extra large table provides ample work support and Surfacing stock up to a full 6" wide
Last update on 2023-08-13 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Cutech 40160H Ct 6 Jointer?
Do you get stressed out thinking about shopping for a great Cutech 40160H Ct 6 Jointer? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Cutech 40160H Ct 6 Jointer, which is why we have assembled a comprehensive list of the greatest Cutech 40160H Ct 6 Jointer available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Cutech 40160H Ct 6 Jointer that you consider buying. Your questions might include the following:
- Is it worth buying an Cutech 40160H Ct 6 Jointer?
- What benefits are there with buying an Cutech 40160H Ct 6 Jointer?
- What factors deserve consideration when shopping for an effective Cutech 40160H Ct 6 Jointer?
- Why is it crucial to invest in any Cutech 40160H Ct 6 Jointer, much less the best one?
- Which Cutech 40160H Ct 6 Jointer are good in the current market?
- Where can you find information like this about Cutech 40160H Ct 6 Jointer?
We’re convinced that you likely have far more questions than just these regarding Cutech 40160H Ct 6 Jointer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Cutech 40160H Ct 6 Jointer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Cutech 40160H Ct 6 Jointer. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Cutech 40160H Ct 6 Jointer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Cutech 40160H Ct 6 Jointer currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Cutech 40160H Ct 6 Jointer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Cutech 40160H Ct 6 Jointer?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Cutech 40160H Ct 6 Jointer.
- Customer Ratings: Number ratings grade Cutech 40160H Ct 6 Jointer objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Cutech 40160H Ct 6 Jointer.
- Product Quality: You don’t always get what you pay for with an Cutech 40160H Ct 6 Jointer, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Cutech 40160H Ct 6 Jointer is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Cutech 40160H Ct 6 Jointer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Cutech 40160H Ct 6 Jointer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.