18 Best Rockville Rv10 1A of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Rockville Rv10 1A of 2022. Check our ranking below.
2,719 Reviews Scanned
- Subwoofer and Enclosure Features: Rockville RV10.1D Single 10” Bass Enclosure System With matching Mono Block Amplifier. 500 Watts Peak Power / 175 Watts RMS CEA-2031 Rating.
- Single 10” Bass Enclosure System with matching Mono Block Amplifier. Quasi Transmission Line Cabinet Design. Bonded, Stapled and Braced 3/5" MDF Cabinet. Computer Designed, Under-Side Bass Reflex, Aero-Port System.
- Angled at 15% for near perfect in vehicle bass alignment.
- Exterior: Logo embroidered high quality aviation grade tweed carpet. Mono, gold-plated push style, speaker terminal. High-Power, High-Efficiency 10" Subwoofer. Injection Molded, Talc Filled, Brushed Polypropylene Cone.
- High Excursion Butyl Rubber Surround. 3-D Molded Dust Cap. Linear Progressive Spider System. 4 Layer, High Power, Aluminum Voice Coil. Bumped and Vented Magnet Motor Structure. RMS Power: 175 Watts CEA-2031 Rating.
- Rockville RBV10. 1A Single 10” 500 Watts Active Subwoofer Enclosure, Size: 10”, Peak Power: 500 Watts, RMS Power: 300 Watts, Nominal Impedance: Single 4-Ohm, 1. 5” Voice Coil, Inverted Carbon Graphite Molded Dust Cap, Kevlar Reinforced Pulp Cone, Double Lami
- Frequency Response: 35Hz - 200Hz, Sensitivity: 88dB, Anti-Vibration Braced MDF Cabinet, Angled Back Fits Perfectly Against Rear Seats, Computer Tuned Bass Reflex Port, Blue/Black Aviation Grade Tweed Carpet with Embroidered Rockville Logo.
- Class AB Amplifier, High Speed MOSFET Power Supply, High Level Speaker Inputs, Low Level RCA Inputs, Built-In Low Pass Crossover (30Hz - 160Hz).
- Accepts up to 8 Gauge Wire, 100mV - 5V Input Voltage, Power (Blue) & Diagnostic (Red) LED Indicators, 20A Fuse, Dimensions in inches: Length 15. 75" x height: 12. 99" x top width 10. 63" x bottom width: 14. 17", Weight: 22. 59 lbs.
- Rockville RVA-M3 V2 4000 Watt Peak/1000 Watt Dyno-Certified RMS @ 1 Ohm Amplifier Mono Car Amp+Remote. Metal Bass Remote Included.
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc) 1 Ohm: 1000 Watts RMS (<1% THD @ 14.4 Volts) (78% efficient). 2 Ohm: 750 Watts RMS (<1% THD @ 14.4 Volts) (84.5% efficient) 4 Ohm: 500 Watts RMS (<1% THD @ 14.4 Volts) (88.3% Efficient). Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 1 Ohm: 4000 Watts. V2 is upgraded with a double side SMT PCB board that dissipates heat efficiently. High-Speed MOSFET Power Supply. Class D Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 32Hz - 300Hz. Subsonic Filter: 10Hz - 50Hz.
- Phase Control Switch. Full IC-Controlled Protection Circuitry. Adjustable 0-18dB Bass Equalizer. Mute and Delay Soft Start System. Status Mode LED Indicator. Minimum THD at Rated Power: <0.1%. S/N Ratio: >90dB.
- Under Voltage Protection at 9V. Over Voltage Protection at 16V. Radiation cooling keeps the amp running at high volumes for hours straight. Extruded aluminum heatsink. Frequency Response: 10Hz - 300Hz. Damping Factor: >150 @ 100Hz. Fuse: 40A*3. Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most power for your money. Dimensions: (L x W x H) 14" x 8.5" x 2.24". Weight:7.8 lbs.
- Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit
- Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design.
- Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers.
- 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B.
- 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder
- Package Includes: (1) Rockville dB11 1400 Watt Peak/350 Watt Dyno-Certified RMS Mono 2-Ohm Amplifier Car Amp+Bass Remote. (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA
- Features of dB11: Rockville dB11 1400 Watt Peak/350 Watt Dyno-Certified RMS Mono 2-Ohm Amplifier Car Amp+Bass Remote. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, R Fosgate, etc). - 2 Ohm: 350 Watts x 1 Channel <1% THD+N. - 4 Ohm: 220 Watts x 1 Channel <1% THD+N.
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 1400 Watts x 1 Channel. - 4 Ohm: 880 Watts x 1 Channel.
- Features of RWK81: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17’ High Grade Twisted Pair of 100% Copper RCA Cable. 17’ 8 Gauge Translucent Blue Super Flex Power Cables. 17’ 18 Gauge Blue Remote Cable. 17’ 16 Gauge Clear Speaker Wire. 3’ 8 Gauge Super Flex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7’ Split Tube Loom.
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
- What's In The Box: (1) dB11 Amplifier. (1) Bass Remote. (1) Birth Sheet with Tested Power. Owner's Manual. Mounting Hardware. Warranty
- Rockville dB11 1400 Watt Peak/350 Watt Dyno-Certified RMS Mono 2-Ohm Amplifier Car Amp+Bass Remote.
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 350 Watts x 1 Channel <1% THD+N. - 4 Ohm: 220 Watts x 1 Channel <1% THD+N.
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 1400 Watts x 1 Channel. - 4 Ohm: 880 Watts x 1 Channel.
- High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz.
- Loaded Sub Enclosure Features: Rockville Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts
- Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
- Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote, CEA Compliant Power Ratings
- Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) - 2 Ohm: 1400 Watts x 1 Channel, - 4 Ohm: 880 Watts x 1 Channel, High-Speed MOSFET Power Supply
- Features of wire kit:, Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable
- Package Includes: (1) Rockville SS10P 10" 800w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100% Copper RCA
- Features of SS10P: Rockville SS10P 10" 800w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, Amplifier built in, Enclosure is made out of cast aluminum which stays cool even under the seat of your car or truck, Metal Bass Remote Included, Gain, bass boost, and crossover controls, Peak Power Handling: 800 Watts, RMS Power Handling: 200 Watts, Heavy Duty Mounting Feet, PWM MOSFET Power Supply,
- Low Level RCA Input, High Level Inputs with Auto Turn-On Technology, Adjustable Input Sensitivity, Soft Delayed Remote Turn-On, Thermal Protection Circuit, Short Protection Circuit, Overload Protection Circuit, Green Power/Red Protect LED, Phase Switch: 0° or 180°, Low Pass Filter: 50Hz - 180Hz, Bass Boost: 0 - 12dB @ 45Hz, Built in Subsonic Filter @ 20Hz, THD: < 0.4%, Fuse Rating: Single 20A
- Specifications of SS10P: Peak Power: 800 Watts, RMS Power: 200 Watts, Impedance: 4 Ohm, Frequency Response: 20Hz - 180Hz, Signal to Noise Ratio: >90dB, Sensitivity: 90dB @ 1w / 1m, Input sensitivity, Low level: 300mV, Input sensitivity, High level: 1.0V, Dimensions (Inches): 13.6" L x 9.65" W x 3" H
- Features of RWK81: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17' High Grade Twisted Pair of 100% Copper RCA Cable, 17' 8 Gauge Translucent Blue Super Flex Power Cables, 17' 18 Gauge Blue Remote Cable, 17' 16 Gauge Clear Speaker Wire, 3' 8 Gauge Super Flex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 60 Amp AGU Gold Plated Fuse, 7' Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- Rockville RWS10CA Slim 1000 Watt 10" Amplified Powered Car Subwoofer Enclosure. 1000 Watts Peak power output.
- 300 Watts RMS CEA rated. 10" Super Slim Subwoofer. Ultra Stiff Composite Pulp Cone with Kevlar Reinforcement.
- 3D Molded Acrylic Dust Cap. Expanded & Rolled Steal Basket. High Density Laminated Foam Surround.
- High Power Strontium Magnet with Ultra Saturated High BL Motor Structure. Vented Core Magnet Motor Structure.
- 2" High Temperature Aluminum Voice Coil. 8mm Washer & Yoke Plates. 13.6mm Peak-to-Peak X-Max. 60oz. Magnet Motor Structure.
- Rockville RCS350-6 350 Watt 6 zone 70V commercial/restaurant amplifier/Bluetooth
- Rockville RCS350-6 350 Watt commercial/restaurant amplifier 19" Rack mountable (removable rack brackets) digital hybrid amplifier/receiver Capable of 70 volt 100 Volt 8 ohm and 4 ohm 70/100 volt RMS power 184 watts 6-Zones – each zone has a separate volume control Built in Bluetooth Audio streaming Fm radio tuner Usb input to play audio stored on a thumb drive (32GB max)
- Sd card slot to play music stored on an SD card (32GB max) separate volume control for Mic1 Mic2 Mic3 MP3 line1 line 2 and MP3 Echo control for the mic inputs with speed and repeat adjustments Built in clipping limiter to protect the amp and speakers Bass and treble control. Detachable euro-block speaker output terminals for easy installation. Chime button for making announcements Top quality aluminum panel with industrial grade knobs 5 segments signal level indication
- (2) sets RCA aux inputs (3) mic inputs Rca line output 100V speaker red positive speaker output terminal 70V speaker red positive speaker output terminal 8 ohm red positive speaker output terminal Shared negative speaker output terminal
- Power requirements 120V/ 50-60Hz A weighted signal to noise (@ 1W) -68 1Dba A weighted signal to noise (referenced to full 4 ohm power) -89 2Dba Frequency response 49Hz to 14 9 kHz Frequency response VS thd+m (worst case across normal bandwidth 1W @ 8 ohms 0 89% weight 22 7lbs Dimensions 19” x 16” x 4” inches
- Package Includes: (1) Rockville RVS12A 12" Slim Vented Powered Car Subwoofer Enclosure, 1400 Watts. (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100% Copper RCA
- Features of RVS12A: Rockville RVS12A Slim 12" 1400 Watt Amplified Car Subwoofer in Vented Enclosure with Shallow Enclosure. 1400 Watts Peak power output. 350 Watts RMS. 12" Subwoofer with 50 Oz magnet. Subsonic filter preset to 30Hz. Vented enclosure plays tight and deep bass compared with the sealed version of this. The enclosure is a little bit bigger than the sealed version we make but this is still shallow and the sound of this is significantly better and this is still really small.
- MDF Enclosure (high quality - NOT particle board!). 2" High Temperature Voice Coils. Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement. 3D Molded Acrylic Dust Cap. Expanded & Rolled Steal Basket. High Density Laminated Foam Surround. High Power Strontium Magnet with Ultra Saturated High BL Motor Structure. Vented Core Magnet Motor Structure. 8mm Washer & Yoke Plates. 13.6mm Peak-to-Peak X-Max.
- Features of RWK81: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17' High Grade Twisted Pair of 100% Copper RCA Cable. 17' 8 Gauge Translucent Blue Super Flex Power Cables. 17' 18 Gauge Blue Remote Cable. 17' 16 Gauge Clear Speaker Wire. 3' 8 Gauge Super Flex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7' Split Tube Loom.
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
- Rockville RCS80-1 60 Watt 70V commercial restaurant amplifier/Receiver with Bluetooth;
- Rockville RCS80-1 60 Watt commercial/restaurant amplifier 19" Rack-mountable (removable rack brackets) digital hybrid amplifier/Receiver. Capable of 70 volt, 100 Volt, 16 ohm, 8ohm, and 4 ohm. 70/100 volt True RMS power: 60 watts. 4 ohm RMS power: 80 watts.
- 8 ohm RMS power: 70 watts. 16 ohm RMS power: 11 watts. Built in Bluetooth Audio streaming. Fm radio tuner. Usb input to play audio stored on a thumb drive (32GB max). SD card slot to play music stored on an SD card (32GB max).
- Distortion: 79dB. Power requirements: 120V/ 50-60Hz. A weighted signal to noise (@ 1W) -79.0Dba. A weighted signal to noise (referenced to full 4 ohm power) -95.1Dba.
- Frequency response (bandwidth @ 2Vrams out, @ -3.0dB) 8 ohms <10Hz – 22.8kHz. Frequency response VS THD+N (worst case, across normal bandwidth 1W @ 8 ohms) 0.82%. weight: 10.03lbs. Dimensions: 16.9” x 9.45” x 2.76” inches
- Package Includes: (1) RockvilIe RVA-M2 2500w Peak/625w CEA RMS @ 1 Ohm Amplifier Mono Car Amp+Remote. (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's. RockvilIe RVA-M2 2500w Peak/625w CEA RMS @ 1 Ohm Mono Car Amplifier. Metal Bass Remote Included. 1 Ohm: 625 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (70.2% efficient)
- 2 Ohm: 440 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (82.4% efficient). 4 Ohm: 264 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (83.7% Efficient). Peak: 2500 Watts @ 1 Ohm (Only use this power as reference if matching with amps that do not have an RMS rating). High-Speed MOSFET Power Supply. Class D Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Low Pass Filter: 32Hz - 300Hz. Subsonic Filter: 10Hz - 50Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Adjustable 0-12dB Bass Equalizer. Mute and Delay Soft Start System. Status Mode LED Indicator. Minimum THD at Rated Power: <0.1%. S/N Ratio: >90dB. Under Voltage Protection at 9V. Over Voltage Protection at 16V
- Radiation cooling keeps the amp running at high volumes for hours straight. Extruded aluminum heatsink. Frequency Response: 10Hz - 300Hz. Damping Factor: >150 @ 100Hz. Fuse: 30A*2. Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most power for your money. Dimensions: (L x W x H) 13" x 8.5" x 2.24". Weight: 7 lbs
- 1 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 4 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 4 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom
- Rockville Krypton-M5 8000 Watt Peak / 2000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp.
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 1 Ohm: 2000 Watts x 1 Channel <1% THD+N (79% efficient).
- 2 Ohm: 1300 Watts x 1 Channel <1% THD+N (86% efficient). 4 Ohm: 780 Watts x 1 Channel <1% THD+N (89.5% efficient). Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).
- 1 Ohm: 8000 Watts x 1 Channel. 2 Ohm: 5200 Watts x 1 Channel. 4 Ohm: 3120 Watts x 1 Channel. Digital Voltage Display on Amp (Accurate within 0.15V). Power/Protect/Clip LED Indicators on the front panel.
- Power/Protect/Clip LED Indicators on Remote control. Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Package Includes: (1) Rockville RG212CA Dual 12 inches Slim Vented Powered Car Subwoofer Enclosure 2000 Watt. (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA
- Rockville RG212CA v2 Dual 12" Slim Vented Powered Car Subwoofer Enclosure. Complete all in one system includes built in amplifier, top quality enclosure, and dual 12” subs. Vinyl finished enclosure with side vents tuned to 40Hz. Enclosure is built with ¾” MDF and is ribbed and braced. 2000 Watts Peak power output. 500 Watts RMS. 12“ Super-Slim Subwoofer. Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement. 3D Molded Acrylic Dust Cap. Expanded & Rolled Steal Basket. High Density Laminated Rubber Surround. High Power Strontium Magnet with Ultra Saturated High BL Motor Structure. Vented Core Magnet Motor Structure. 2” High Temperature Aluminum Voice Coil. 8 mm Washer & Yoke Plates
- 13.6 mm Peak-to-Peak X-Max. 40 oz. Magnet. Slim Vented MDF Enclosure Design. Impedance: 4-ohms. Frequency response: 30Hz-500Hz. SPL @ 1w/1m: 89dB. Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth. Unit Weight: 40.12 Lbs
- Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier. 2 Ohm stable amplifier. Class D amplifier. Extruded aluminum heatsink stays cool even at high volumes. 200mV – 5V Variable Input Level. 12dB Low Pass Crossover Frequency 50Hz-200Hz. Low Level RCA Inputs. Remote level attenuation: 0 to -32.2 dB. 3.7 second turn on delay. High Level Speaker Level Input with Auto Start Music Sense. RJ11 Jack for Dash Mounted Bass Remote
- Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17’ High Grade Twisted Pair of 100% Copper RCA Cable. 17’ 8 Gauge Translucent Blue Super Flex Power Cables. 17’ 18 Gauge Blue Remote Cable. 17’ 16 Gauge Clear Speaker Wire. 3’ 8 Gauge Super Flex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7’ Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
- Features: Rockville PUNISHER Series 10" Dual 1-Ohm Car Subwoofer, Peak Power Handling: 5000 Watts, Program Power Handling: 2500 Watts, CEA Rated RMS Power Handling: 1250 Watts, 3" 4-Layer Black Aluminum Voice Coil Former Wound with OFC Wire, This voice coil is stable up to 250 degrees celsius! The voice coil windings are made in the USA, Double Stacked 246 Oz Y35 Magnet, Cast Aluminum Basket With Black Sanded Finish, Two Chrome-Plated Binding Post Terminals, Black Non-Pressed Paper Cone
- Ultra-Stiff cone is extremely thick and strong, Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion, Black stitching reinforces the cone and ensures long life, New Ultra-stiff PolyPropylene (PP) Dustcap is 0.9mm thick (Extremely, thick, beefy, and stiff), Oversized aluminum heatsink ring keeps the voice coils cool by absorbing and dissipating heat, Extra thick T-yoke and washers assist in keeping the voice coils cool by absorbing and dissipating heat
- This series was engineered from the ground up to keep the voice coils cool so that even if you play test tones for long periods of time in a competition atmosphere the sub can handle it, Impedance: Dual 1-Ohm Voice Coils, Vented Holes on T-yoke Enhances Heat Dissipation, Custom Rubber Boot Magnet Cover, Custom Rockville Mounting Gasket makes it Easy To Mount the Subwoofer Air-Tight, High BL Magnetic Motor Gap
- We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated, 3 layer spider made with thick gauge material that is resistant to tearing even at extreme SPL levels, Easy to install recone kits are available, Cutout Diameter: 10.04inches, Mounting Depth: 6.69 inches, Frequency Response: 30.444 Hz - 500Hz, 15mm T-Yoke + 12mm Washer, Sensitivity: 82.7dB, Sealed Enclosure Volume: 0.88 -1.41Cubic Feet
- Vented/Ported Enclosure Volume: 1.6-2.12Cubic Feet, 1-Way XMAX: 27 MM, 2-Way XMAX: 54 MM, Weight: 37.49 lbs., Shipping Weight: 39.69 lbs., Shipping Box Dimensions: 13.58” x 13.58” x 12.6” Inches
- Rockville RW10CA 800 Watt 10” Slim Car Subwoofer 800 Watts Peak / 200 Watts RMS PWM MOSFET Power Supply
- Low Level RCA Input High Level Inputs with Auto Turn-On Technology Adjustable Input Sensitivity
- Soft Delayed Remote Turn-On Thermal Protection Circuit, Short Protection Circuit Overload Protection Circuit
- Phase Switch: 0° or 180° Low Pass Filter: 50Hz - 150Hz Bass Boost: 0 - 18dB @ 45Hz
- Subwoofer Level Remote Control Built in Subsonic Filter @ 29Hz
- Features: Rockville VS10K54 Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts
- Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
- Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it, Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
- Mounting Gasket with Rockville branding looks great and Makes it Easy To Mount the Subwoofer Air-Tight, High BL Magnetic Motor Gap, High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power
- Detailed Info: Body: Non-Pressed Paper, Gap Plate Inside Diameter: 70mm (2.75 inches), Gap Plate Outside Diameter: 140mm (5.51 inches), Gap Plate Thickness: 25mm (0.98 inches), Yoke Outside Diameter: 130mm (5.11 inches)
How Do You Buy The Best Rockville Rv10 1A?
Do you get stressed out thinking about shopping for a great Rockville Rv10 1A? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Rockville Rv10 1A, which is why we have assembled a comprehensive list of the greatest Rockville Rv10 1A available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Rockville Rv10 1A that you consider buying. Your questions might include the following:
- Is it worth buying an Rockville Rv10 1A?
- What benefits are there with buying an Rockville Rv10 1A?
- What factors deserve consideration when shopping for an effective Rockville Rv10 1A?
- Why is it crucial to invest in any Rockville Rv10 1A, much less the best one?
- Which Rockville Rv10 1A are good in the current market?
- Where can you find information like this about Rockville Rv10 1A?
We’re convinced that you likely have far more questions than just these regarding Rockville Rv10 1A, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Rockville Rv10 1A, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Rockville Rv10 1A. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Rockville Rv10 1A buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Rockville Rv10 1A currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Rockville Rv10 1A has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Rockville Rv10 1A?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Rockville Rv10 1A.
- Customer Ratings: Number ratings grade Rockville Rv10 1A objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Rockville Rv10 1A.
- Product Quality: You don’t always get what you pay for with an Rockville Rv10 1A, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Rockville Rv10 1A is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Rockville Rv10 1A information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Rockville Rv10 1A is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.