Contents

The Best Duplicator I3 V2 – Steel Frame of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Duplicator I3 V2 – Steel Frame of 2023. Check our ranking below.

2,797 Reviews Scanned

Rank No. #1

FYSETC 3D Printing Buildplate Steel Spring Sheet Bed 220x220mm/ 8.6x8.6 inch Preapplied PEI with Soft Mounting Base for Ant A8 Wanhao Duplicator i3 Monprice Make-r Geeeteh i3

Upgrade Replacement Spring Steel Sheet for Wanhao Monprice 220 hotbed: Cut corner to fit well, flexible, removable.
Complete FlexPlate build surface System: Include a FlexPlate sticking with pei sheet, a magletic mounting base.(If just need the steel plate with PEI, please search ASIN:B08S2ZBBZY)
Specially-coated FlexPlates are resistant to rust and work on both heated and non-heated print beds. The FlexPlate is engineered to maintain shape over time.
Before using, please remove the protect film which stick on the PEI surface, attach to your print bed via the Soft Mounting Base, perform a one-time z-height adjustment, and begin printing. (After installing, how to auto-leveler: turn the metal part upside down so the uncoatd metal is facing up. Apprently the auto-leveler uses electric current to do it's thing. The PEI side is not so good.) When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
Kindly Tips: We have helped you stick PEI on the steel plate, use machine, so you don't need to worry about bubbles. if you received package but found the air bubbles or Scratches, please don't worry, they are the surface layer, PEI will not be affected.

Rank No. #2

YOTINO Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 V2 Plus - 3D Printers

【Big Upgrade】Drop-in replacement for stock thermistor on MP Maker Select Plus / Wanhao Duplicator Plus
【Compatible】Also compatible with MP Maker Select V2.1 and Wanhao Duplicator V2.1
【Install】Easy to mount with M3 HEX stuв, and screws solidly. Please note that use of this thermistor with your 3D printer does require an update of the ADC table in your 3D printer’s firmware.
【Characteristics】Can hold temperature up to 300C with ceramic glue and fiberglass insulation on leads

Rank No. #3

3D Printer Glass Bed Upgraded, Borosilicate Glass Plate w/Corners Cut for Monoprice Maker Select V2 Anet A8/A6 Wanhao Duplicator i3 220x220x3mm with4 Glass Clips

【Borosilicate Glass】 High binding power when heating. Easy to separate the plastic parts when cooling.
【Size】 220mm x 220mm x 3mm.Compatble with Maker Select V2, Wanhao Duplicator, Anet A8, Anet A6 and other 3D Printers.
【Safety】 Flat Polished Edge for safe to handle.
【Hight quality 】Resistant to thermal shock compared to regular glass. A good build plate upgrade replacement.
【Flat Enough】 Reduces warping, keep the printing surface level.

Rank No. #4

Micro Swiss CNC Machined Lever and Extruder Plate for Wanhao i3 (Full Kit)

Upgrade for MK10 Exturders
Fits: Wanhao i3, Wanhao i3 Plus, Monoprice Maker Select V2, Cocoon Create 3D Printer
Extruder Plate is designed with the 4mm hole for Flexible Filament Mod.
For Right Hand Exturders
Made in USA by Micro Swiss

Rank No. #5

NETGEAR Wi-Fi Range Extender EX3700 - Coverage Up to 1000 Sq Ft and 15 Devices with AC750 Dual Band Wireless Signal Booster & Repeater (Up to 750Mbps Speed), and Compact Wall Plug Design

EXTENDED WIRELESS COVERAGE: Adds Wi-Fi range coverage up to 1000 sq ft, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more..Connectivity protocol:Ethernet,Wi-Fi
AC750 WI-FI SPEED: Provides up to 750Mbps performance using dual-band and patented FastLane(TM) technology.
UNIVERSAL COMPATIBILITY: Works with any wireless router, gateway, or cable modem with Wi-Fi.
WIRED ETHERNET PORT: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed.
SAFE & SECURE: Supports WEP and WPA/WPA2 wireless security protocols.

Rank No. #6

12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater for 3D Printer MK10 Extruder/Hotend

12 Volt 40 Watt (12v 40w) MK10 3D Printer Ceramic Heater Cartridge with a 1/4-in (6.35mm) Diameter and 1m Wire
Designed to be the proper OEM fit for 3D printers with a MK10 extruder and a 6.35 mm (1/4 inch) heater block bore
Compatible with Wanhao Duplicator i3, FlashForge Creator, Monoprice Maker Select v1/v2/v2.1 FDM/FFF Printers with 1/4in heater hole
Length: 20mm / Diameter: 6.35mm - Wire Length: 100cm
1/4 (0.25in) US Standard Size Often Hard to Find - Used on many American and Chinese Made 3d Printers designed for the US Market

Rank No. #7

BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs

Rank No. #8

Twotrees Double Side Smooth Textured PEI Sheet 220x220mm Magnetic PEI Bed for I3 Mega S Anets A8 A6 Voron 2.4 Magnetic Spring Steel Build Plate

【Kit Includes】1 pcs Double-sided PEI sheet (One side smooth PEI, one side textured PEI). 1 pcs Flexible adhesive backed magnetic base. Double-sided PEI sheets produced using advanced technology.
【Easy to install】Stick the soft magnetic base to the heating bed of your 3D printer, then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
【Easy to use】For most filaments, no need for stick glue, tape or other adhesive. Good adhesion can be achieved when the temperature of the heated bed is around 60°C. When the PEI building surface has cooled, the print can be easily removed by hand by simply bending the spring steel PEI slightly. The maximum printing temperature of PEI is 120°C, it is compatible with most of filament, such as: PLA/ ASA/ PLA+/ ABS etc.
【Compatibility】The size of PEI sheet is 220*220mm, not warped. It is suitable for I3 mega S, Anets A8/A6 and other 3D printers. If your 3D printer has a 220x220mm heat bed platform, This PEI sheet is compatible with your 3D printer.
【Outstanding service】If there is a issues with the product you received, send us a message and we will help you out. If the product is damaged during use, we will replace it with a new one for you. Thanks.

Rank No. #9

3D Printer Textured PEI Spring Steel Sheet with Flexible Magnetic Sticker 235x235mm Surface for Aquila Ender 3, Pro, V2, S1, Ender 5, KP5M

Size: Magnetic plate 235mmx235mm/9.2x9.2 inch for Ender 3, Ender 3 Pro, Ender 3 v2, Ender 3 S1, Longer LK4, LK4 Pro, and most other 235mm 3D printers.Note: it is single side, one side is textured,there is a logo on the palte,please be care.
High quality build plate: The custom-designed textured PEI material let’s your prints easily adhere to the flexible print bed.
Easy to install: PEI spring steel sheet made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.
When printing is complete, let the PEI Sheet cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
We have applied PEI sheet on the build plate by machine, so you don't need to worry about the performance. If you receive the package but find the air bubbles or scratches, they are only on the surface and won’t effect printing performance. The PEI is textured, so scratches over time from printing will not show up in your print. The textured surface leaves an eye catching, professional finish to your print.

Rank No. #10

IdeaFormer-3D Double Print Bed Smooth Carbon Fiber Style PET+ Textured PEI Spring Steel Sheet Bed Plate+ Magnetic Base for Anet A8/Wanhao Duplicator i3 and Other Same Sized Hot Bed

【Textured PEI + Carbon Fiber Style PET + Magnetic Build Plate】PEI + PET double-sided printing platform, one side is a smooth PET platform, the underside of the printed model is smooth and the model is easy to remove and clean. The other side is PEI frosted surface, the frosted sticker surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping.
【High Durability】The PET printing surface is resistant to high temperatures of 120°C and the PEI coating is 260°C.
【Compatible filaments】PET construction surface only prints PLA filaments; PEI surface panels print most filaments such as PLA / ABS / PETG / TPU / nylon.
【Attention】Our double-sided textured PEI+PET printing plate fits for 3D printer with 220x220 platform size, such as MK2/MK2A, Anet A8, Anet A6, Reprap, Mendel, Wanhao Duplicator i3, Monoprice Maker, NOT suitable for Ender 3 , 5 etc. Please confirm your printer platform size before ordering.
【After-Service】If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the “Your Orders” page. We will respond with 24 hours.

Rank No. #11

Fulament PEI Sheet Plate for Anet A8, Cocoon 3D Printer Touch, TronXY X2, P802M, Ultimaker 1, MonoPrice Maker, Ultimate and V2, Robo R2 | Smooth & Textured Magnetic Bed | Fula-Flex 2.0 | 220 x 220

[ TWO SIDES. TWO FINISHES ] - Fulament flex bed is made with high-quality spring steel that makes it a highly durable PEI sheet for 3D printing. We use 75% thicker PEI and 25% thicker spring steel, significantly increasing Fula-Flex longevity. Our PEI build plate is double-sided, with one textured and one smooth side. The textured powder-coated side of the PEI bed leaves a textured matte finish. The Smooth side of the PEI bed finish leaves a glossy, reflective finish on the bottom of your print
[ EASY TO INSTALL ] - Fulament PEI build plate is very easy to use. Simply stick the magnetic sheet onto your heated bed and place the flexible PEI build plate platform with a PEI surface on top. The magnetic sheet surface holds the flexible build plate very tightly. Once you have finished printing, remove the spring steel plate, flex the print off, and snap the Fula-Flex back onto the magnetic sheet. Prints are removed easily without any scratches or damage
[ STRONG GRIP WHEN HEATED. EASY RELEASE WHEN COOLED ] - Keeping our customers' needs in mind, we build a 3D print mat that increases printing success. Our 3D printing mat grips the parts with strength when heated and releases them effortlessly when cooled. Print across the entire build plate with confidence. The magnetic sheet can sustain higher temperatures of 130°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!
[ COMPATIBILITY ] - Fulament 3d printer magnetic build plate 220mm x 220mm fits Anet A8,Cocoon 3D Printer, Wanhao Duplicator i3 V1 / Plus, Wanhao Duplicator 6, Ultimaker 1, Monoprice Maker Select Plus / Ultimate / V2, Tronxy X2, P802M, Robo R2, Mega Pro, Mega S
[ FULAMENT'S PROMISE ] - Fulament is a USA-based company, and our products are made by enthusiasts for enthusiasts. We know you'll love our 3D printer bed mat as much as we do. All of our products feature a 12-month warranty PLUS knowledgeable tech support. If you have any kind of question or problem regarding our product, feel free to contact us, and we will be happy to assist you shortly. “FULAMENT” is a Trademark Registered Brand

Rank No. #12

PEI Flex Plate Spring Steel Double Sided Textured PEI Powder Coated Sheet with Magnetic Base, 3D Printer Building Bed, 220x220 mm (8.66x8.66 inch), for Anet A8,TronXY X2,Wanhao Duplicator i3 V1 / Plus

What will you get: The PUTFOR build platform has two items, including one double sided PEI coated spring steel flex plate and one magnetic base, the flex plate is texture. The magnetic base is durable and strong as the thickness is 1.5mm, high temp resist up to 130℃ at long time.
Advantage：Never warp& Never rust. Easy to get the first layer even for a new user. Flexible, Removable, stick to magnets very well. Suits variety of filaments, especially for PLA. Free clean- just flex the plate a little then take the prints off after cooled Fast heater performance, less waiting time after printing. A lifetime 3D printer bed.
How to use: Now throw away your glue now and you will no longer need it. Before use, you only need to stick the magnetic bottom with 3M glue on your hot bed, and then put the pei flexible plate on the magnetic bottom to start enjoying printing. After the print has cooled down, bend the pei flexible board to easily release the print.
The Size: 220x220 mm (8.66x8.66 inch), which is applicable with Anet A8, Cocoon, Wanhao Duplicator i3 V1 / Plus, Ultimaker 1 & 2 and any other printer with a 220x220 mm build size (Please measure your hot bed and make sure it is the right size for you) !
Perfect after-sales service: Customer satisfaction is our primary goal. If you have any questions, please contact us. We promise 100% refund.

Rank No. #13

FYSETC 3D Printing Bed PEI Sheet Steel Spring Sheet Only Build Plate w/Corner Cut 220x220mm/ 8.6x8.6 inch with PEI Mounting Base for Wanhao Duplicator i3 Make-r A8 A6

Upgrade Replacement FlexiblePlate for the Size of 220mm fixed base or the sticker heatbed : Cut corner to fit well, removable.
Only Steel Plate sticking with PEI, A Spare ready for the combination Kit(Searching the ASIN : B082WTTD1D at our store). Working with the sticker will have better performance.
Special-coated FlexPlates are resistant to rust and can directly work on the 3D printes which own the heatbed. The FlexPlate is engineered to maintain its shape for a long time.
Before using, please remove the protective film that stick on the PEI surface.When finishing the printing, let it cool down, then easily remove the printouts from the FlexPlate, flex and pop your prints off!
Kindly Tips: This is the steel plate only with PEI on the surface and we stick PEI by machine, so you don't need to worry about bubbles. if you receive the package but find the air bubbles or Scratches, please don't worry, they are on the surface layer, PEI will not be affected.

Rank No. #14

[Gulfcoast Robotics] M3 Stud Screw-in thermistor 100K NTC 3950 - Drop in Replacement, Works for Any China 3D Printer extruders - Anet, Wanhao, Maker Select etc.

Drop-in replacement for Wanhao Duplicator i3, Maker Select V1, V2, V2.1 3D printers
Drop-in replacement thermistor for almost any China made 3D printer
Works with Anet, HIctop, Tronxy, Creality, V6 hotend and many others

Rank No. #15

Park Sung 3D Printer Heat Bed Leveling Parts,Silicone Column Solid Mounts,Leveling Spring Replacement Part (8 Pack)

Major Upgrade From The Original Leveling Spring - Now you spend much less time leveling your 3D Printer bed. Once you get level, you won't need to re-adjust for quite a while. Effectively avoid layer shifts caused by bed shaking during printing. The trick is that the short mount needs to go ON TOP of the strain relief, not under it.
The 1/4 quantity in the package is a short column(3 short in 12 pack; 2 short in 8 pack). There is a Bed Cable cage at the left rear of the Creality Ender 3D Printer series.short column will fit there, and other 3D printer series take 4 high columns.
Size - OD = 0.62''/15.75 mm ; ID = 0.16'' / 4.00 mm;High Columns Length = 0.71'' / 18.00 mm ; Short Columns Length = 0.62'' / 15.75 mm
Park Sung is the designated first-level cooperative agent of Creality.
Welcome to share your experience to us, we will publish it in the product description of the advertisement after your consent, so as to share with more 3D printing enthusiasts, please feel free to contact us if you have any questions.

Rank No. #16

45MinST 3600lbs Heavy Duty Reinforced Platform, 18 Inch Tall Mattress Foundation, Steel Slats Support Bed Frame with Underbed Storage, Easy Assembly and Non Squeak, Queen

GOOD STABILITY: Reinforced Structure and Heavy Duty Quality make the Modern Frame Incomparablely Stable, Non-twisting, Non-squeeking.
EASY ASSEMBLY: Concise Design and Simple Installation to Unfold and Lock up Quickly in Minutes, No Need Extra Tools, 2 Person Recommended.
NO BOXSPRING: Well Support the Mattress with Multiple Points Bed Legs and Sturdy Steel Slats; Headboard Holes Reserved for Your Choice.
NOISE FREE: Enclosed the Mattress in Place to avoid Moving, Unique Square Steel and Stronger Loading Capacity to Guarantee Your Bed Time.
WARRANTY: 5 Year Product Warranty, 24 Hour On-line to Your Satisfaction; Pretty Storage Room Under Bed of 15.6 Inch High.

Rank No. #17

2 Pcs 235 * 235Removable Magnetic Spring Steel Heated Bed Platform,Smooth Carbon Fiber PET Sheet/Frosted PEI Build Plate Combination and 3D Printer Bed Magnetic Rubber for Ender 3/Ender 3 v2

Combination of carbon fiber pattern PET and PEI particle spraying surface heated bed build plate, you can choose texture or smooth,different colors of platform according to your printing filament.The steel handle is wrapped with silicone sleeve to prevent hot hand and cut.
Both PEI and PET Plate is Flexible, removable. The middle support layer is made of high quality spring steel sheet,high strength and high temperature resistance.Magnetic rubber pad supports 100℃ printing.
PEI Platform: The surface adopts the third-generation PEI spraying process, the particles are uniform and fine, more wear-resistantthe, model is very easy to adhere to the surface of the hot bed.Excellent wear resistance and high temperature resistance(220℃).
PET Platform: The stainless steel surface of the spring is covered with a PET sheet. Smoother surface compared to PEI surface. The surface of pet sheet is treated with carbon fiber patten, high temperature resistance, wear resistance, flexibility, adhesion, durability and other comprehensive performance is excellent.
Size：235*235mm，Compatible with as Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2 and other same size FDM Printer, Compatible with PLA/PETG/PEEK/ABS and any other filaments.

Rank No. #18

Zamtac 1 pcs Wanhao Duplicator i3 Plus Cartridge Heater Tube Heater Cartridge Style Heater Tube for Wanhao Duplicator

Model number: Wanhao Duplicator i3 Plus
Item type: Cartridge Heater
Ships from: China

Rank No. #19

Cystic Acne & Hormonal Acne Treatment: Cystic AcneTreatment, Acne Spot Treatment for Face, Acne Treatment for Face, Acne Spot Treatment, Pimple Spot Treatment, Cystic Acne Spot Treatment, 100ml

Advanced Acne Treatment for Face: Our acne spot treatment is specifically formulated to combat acne, targeting both regular breakouts and stubborn hormonal or cystic acne. With potent ingredients like salicylic acid, tea tree oil, it unclogs pores, reduces inflammation, and promotes clearer, healthier skin. Achieve a confident complexion with our effective acne spot treatment.
Rapid Acne Spot Treatment for Face: Say goodbye to pesky pimples with our fast-acting acne spot treatment. Designed to penetrate deep into the skin, acne cream quickly dries out and diminishes acne spots, leaving you with a smoother, blemish-free face. Trust our targeted solution hormonal acne spot treatment for effective results and visible improvements overnight.
Dermatologist-Recommended Cystic Acne Treatment: Our acne spot treatment for face comes highly recommended by dermatologists. With a blend of effective ingredients, including salicylic acid, tea-tree oil, it fights acne and prevents future breakouts. This gentle cystic acne treatment yet powerful formula soothes the skin, promotes healing, and helps you achieve a clearer complexion. Trust in dermatologist-approved care.
Specialized Cystic Acne Treatment(acne cream & pimple cream): Tackle stubborn cystic acne with our specialized cystic acne spot treatment. Formulated to reduce redness, inflammation, and pain associated with deep, painful bumps, hormonal acne treatment helps promote healing and prevents future cystic breakouts. Take control of your skin and experience the power of targeted cystic acne treatment.
Hormonal Acne Treatment: Our salicylic acne spot treatment offers effective relief for hormonal acne treatment. By regulating oil production, unclogging pores, and combating acne-causing bacteria, pimple cream targets hormonal breakouts and promotes a balanced complexion. Reclaim your confidence and enjoy smoother, clearer skin with our hormonal acne treatment.

SaleRank No. #20

Calorbot 3pcs MK10 Silicone Socks Instead Ceramic Insulation for Wanhao Duplicator D4/I3/Dremel i3 Makerbot 2 QIDI Tech Flashforge Silicone Heater Block Cover - Blue

Made of a heat-resistant, non-stick silicone material our socks will repel build-up of molten plastic. This really helps with sticky materials like co-polyesters and filled-composite materials that like to build up on nozzles.
Very useful silicone socks: will keep your heater block clean and free from burnt and blackened plastic. They don't just keep the block clean, but also keep heat inside the hotend and off your print.
Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print.
The covers simply push onto the front of the HotEnd with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly.
Please kindly note: we suggest highest safe temperature resistance is about 230℃-250℃/ 446℉-482℉.

Last update on 2023-08-05 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Duplicator I3 V2 – Steel Frame?

Do you get stressed out thinking about shopping for a great Duplicator I3 V2 – Steel Frame? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Duplicator I3 V2 – Steel Frame, which is why we have assembled a comprehensive list of the greatest Duplicator I3 V2 – Steel Frame available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Duplicator I3 V2 – Steel Frame that you consider buying. Your questions might include the following:

Is it worth buying an Duplicator I3 V2 – Steel Frame?
What benefits are there with buying an Duplicator I3 V2 – Steel Frame?
What factors deserve consideration when shopping for an effective Duplicator I3 V2 – Steel Frame?
Why is it crucial to invest in any Duplicator I3 V2 – Steel Frame, much less the best one?
Which Duplicator I3 V2 – Steel Frame are good in the current market?
Where can you find information like this about Duplicator I3 V2 – Steel Frame?

We’re convinced that you likely have far more questions than just these regarding Duplicator I3 V2 – Steel Frame, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Duplicator I3 V2 – Steel Frame, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Duplicator I3 V2 – Steel Frame. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Duplicator I3 V2 – Steel Frame buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Duplicator I3 V2 – Steel Frame currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Duplicator I3 V2 – Steel Frame has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Duplicator I3 V2 – Steel Frame?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Duplicator I3 V2 – Steel Frame.
Customer Ratings: Number ratings grade Duplicator I3 V2 – Steel Frame objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Duplicator I3 V2 – Steel Frame.
Product Quality: You don’t always get what you pay for with an Duplicator I3 V2 – Steel Frame, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Duplicator I3 V2 – Steel Frame is should be an indication of how long it will work out for you.

We always remember that maintaining Duplicator I3 V2 – Steel Frame information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Duplicator I3 V2 – Steel Frame is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Is the duplicator i3 v2.1 free shipping?

A: FREE SHIPPING WORLD WIDE! The Duplicator i3 V2.1 is based on the revolutionary work of reprap core developer Josef Průša (Prusa). Wanhao is proud to introduce an entry-level 3D printer designed for customers who want to begin 3D printing without having to build a kit.

Q: Is the Wanhao duplicator i3 a 3D printer?

A: WANHAO DUPLICATOR I3 V2.1 – STEEL FRAME 3D PRINTER FREE SHIPPING WORLD WIDE! The Duplicator i3 V2.1 is based on the revolutionary work of reprap core developer Josef Průša (Prusa). Wanhao is proud to introduce an entry-level 3D printer designed for customers who want to begin 3D printing without having to build a kit.

Q: Is the duplicator i3 based on RepRap core?

A: The Duplicator i3 V2.1 is based on the revolutionary work of reprap core developer Josef Průša (Prusa). Wanhao is proud to introduce an entry-level 3D printer designed for customers who want to begin 3D printing without having to build a kit. This is a pre-assembled steel frame Prusa i3…the best-selling reprap in 3D printing!

Q: Is the Prusa i3 3D printer open source?

A: Your vision is our driving force! Pre-assembled steel frame Prusa i3 you ever had. Fully open source enable you to use any most up to date software. It’s not only a printer, but a 3D guiding book walk you through basic knowlege of 3D printing.