The Best ebtech line level shifter of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best ebtech line level shifter of 2023. Check our ranking below.

2,251 Reviews Scanned

Rank No. #1

Morley Line Level Shifter (MLLS)

Converts Back and Forth Between Weak and Strong Audio Signals
Increase or decrease signal voltage -10dBV and +4dBu without adding noise
Custom In-House Made Morley Step Down/Step Up Isolation Transformers
2 Channels With 1/4" TRS & XLR Flexible Routing
Can Convert Between 1/4" & XLR in Either Direction

Rank No. #2

Ebtech LLS-2 Line Level Shifter 2-Channel Box

Increase or decrease signal voltage -10dBV and +4dBu without adding noise
Also contains hum eliminator technology
Also converts balanced and unbalanced signals
1/4” jacks can accept any combination of mono or stereo plugs
Passive device No power required

Rank No. #3

Ebtech LLS-2-XLR Line Level Shifter 2-Channel Box with XLR Jacks

Increase or decrease signal voltage -10dBV and +4dBu without adding noise
Also contains hum eliminator technology
Also converts balanced and unbalanced signals
1/4” smart jacks and XLR jacks
Passive device No power required

Rank No. #4

GeeekPi 6Pack TXS0108E 8 Channel Logic Level Converter Bi-Directional High Speed Full Duplex Shifter 3.3V 5V for Arduino Raspberry Pi

8 digit bi-directional 3.3V-5V/5V-3.3V logic level converter board; It can bidirectionally transfer with 8 channels between high logic voltage and low logic voltage.
VCCA side voltage range: 1.2V-3.6V; VCCB side voltage range: 1.65v-5.5v
Serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect.
Widely used in the communication between 5V SCM and 3.3V device, 3.3V SCM and 5V device. It can also apply in the level conversion between MCU and SD card, MCU and iic/spi serial port devices.

Rank No. #5

HiLetgo 10pcs 4 Channels IIC I2C Logic Level Converter Bi-Directional 3.3V-5V Shifter Module for Arduino

The bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time
Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side
3.It can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage

Rank No. #6

KeeYees 10pcs 4 Channels IIC I2C Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter for Arduino (Pack of 10)

The bi-directional logic level converter is a small device, which can safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time.
This level converter works with 2.8V and 1.8V devices, it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage.
Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.

SaleRank No. #7

ART CLEANBox Pro Dual Channel Level Converter (CLEANBOXPRO)

XLR connectors for balanced inputs and outputs
RCA phono jacks and stereo 1/8″ mini-phone jacks for unbalanced inputs and outputs
Comes with external power supply for operation with AC mains
Applications: Home or professional recording studios, Live sound, PA, and permanent installs, DJ, AV, and consumer HiFi, Podcasting and broadcasting
The CLEANBoxPro can be used with: mixers, audio processors, laptop computers, computer sound cards, CD/DVD players, video gaming machines, MP3 player/recorders, powered monitors and digital audio workstations

Rank No. #8

HiLetgo 5pcs TXS0108E High Speed Full Duplex 8 Way 8 Channel Level Conversion Module 8-Bit 8 CH Logic Level Bi-Directional Converter Module

Provide two-way communication capabilities.
Provide 3.3-5V, 1.8-3.3v and other common level conversion capability.
Serial communication interface compatible with UART/IIC/SPI port easy to connect.
Widely used in the MCU and SD card, MCU and serial devices,MCU and 5V/3V module communiction.
OE active high enable IO recommended by a low voltage side of the IO port.

Rank No. #9

HiLetgo 5pcs 5V/3.3V 8 Channel Level Converter IO Bidirectional Mutual Convert for Raspberry PI

Conversion level range: 1.8V-6V
5V/3.3V 8 Channel Level Converter IO Bidirectional

Rank No. #10

PlayStation PS5 Console – God of War Ragnarök Bundle

Embark on an epic and heartfelt journey alongside Kratos and Atreus with the PlayStation 5 Console – God of War Ragnarök Bundle..Memory storage capacity : 512 MB
Bundle includes: PlayStation 5 console, DualSense Wireless Controller, Base, HDMI Cable, AC power cord, USB cable, God of War Ragnarok full game voucher
DualSense Wireless Controller integration: Feel your journey through the Norse realms, made possible by immersive haptic feedback and adaptive trigger functionality.
Stunning visuals: Bask in the beautiful worlds you travel through, brought to life by stunning art direction and arresting attention to detail. Behold enhanced reflections, lighting and shadows, as well as increased geometric detail and enhanced deformable snow.
Fully optimized for 3D Audio*: Immerse yourself in the unique soundscapes of the Nine Realms as sounds reverberate and echo throughout the environment. Use highly accurate spatial audio to hear enemies approaching from any direction, including above and below you. *3D audio with stereo headphones (analog or USB)

Rank No. #11

EPLZON TXS0108E High Speed Full Duplex Logic Level Converter 8 Channel SPI 8 Way 3.3V 5V IIC 8-Bit Bi-Directional Converter Module Apply to Raspberry Pi and Arduino (Pack of 5 Set)

✅Provide two-way communication capabilities,OE active high enable IO recommended by a low voltage side of the IO port.
✅ Supply voltage VA:1.2V to 3.6V - VB: 1.65V to 5.5V.
✅ Allows the use of 5V modules on 3.3V microcontrollers, or 3.3V modules on 5V microcontrollers.
✅ Supports SCM, I²C, SPI.
✅Widely used in the MCU and SD card, MCU and serial devices,MCU and 5V/3V module communiction.

Rank No. #12

V TELESKY 10Pcs TXS0108E 8-Channel Bi-Directional Logic Level Converter Module 3.3V to 5V Shifter for Arduino

✿【Logic Level Converter】:TXS0108E Level Shifter ;Provide 3.3-5V, 1.8-3.3V and other common level conversion capabilities.
✿【Easy to connect】:Serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect.
✿【Parameters 】:VCCA side voltage range: 1.2V-3.6V; VCCB side voltage range: 1.65v-5.5v; Size:16*26MM.
✿【Wide Range of Applications】:Widely used in the communication between 5V SCM and 3.3V device, 3.3V SCM and 5V device. It can also apply in the level conversion between MCU and SD card, MCU and IIC/SPI serial port devices.
✿【Package Included】:10pcs TXS0108E High Speed Full Duplex 8 Way 8 Channel Level Conversion Module 8-Bit 8 CH Logic Level Bi-Directional Converter Module.

Rank No. #13

Morley Hum Eliminator (MHE)

Specifically Designed to Eliminate Ground Loop Hum in Audio & Video Devices
Custom In-House Made Morley 1:1 Isolation Transformer
No Power Source Required. Completely Passive
2 Channels with 1/4" TRS & XLR Inputs & Outputs
Can Convert Between 1/4" and XLR in any Combination

Rank No. #14

Adafruit 74AHCT125 - Quad Level-Shifter (3V to 5V) [ADA1787]

Excellent level shifting chip
Very good at converting 3V logic up to 5V
You'll want it when connecting 3V devices such as Teensy 3 to NeoPixels!

Rank No. #15

Logitech G Driving Force Shifter – Compatible with G29, G920 & G923 Racing Wheels for-PlayStation 5, Playstation 4, Xbox-Series X|S, Xbox-One, and-PC

Works with G29 and G920 Driving Force Racing Wheels: Driving Force shifter is designed for both G29 and G920 Driving Force racing wheels, to enhance the latest PC and console racing titles.
Quality Construction: With a solid steel gear shaft, Driving Force shifter is built for precision racing and long-lasting reliability. The knob and boot are covered in high-quality, hand-stitched leather.
Six-Speed Shifter with Push-Down Reverse: The six-speed “H” shifter moves fluidly and solidly clicks into each gear, helping you execute smooth, accurate gear transitions on hairpin turns and straightaways.
Secure Mounting: Durable built-in clamps and bolt points allow Driving Force shifter to be mounted securely to a table or racing rig, to minimize shifting or wobbling during aggressive race maneuvers.
Compatible with PlayStation 5/4, Xbox One, Windows 8.1, Windows 8, or Windows 7, games that support Logitech force feedback racing wheel

Rank No. #16

Dorhea 10PCS TXS0108E 8 Channel Level Conversion Module High Speed Full Duplex 8 Way Bi-Directional Converter 8-Bit Logic Level Module Shifter 3.3V 5V Compatible with Raspberry Pi

8 digit bi-directional 3.3V-5V/5V-3.3V logic level converter board, it can bidirectionally transfer with 8 channels between high logic voltage and low logic voltage.
VCCA side voltage range: 1.2V-3.6V; VCCB side voltage range: 1.65v-5.5v; 3.3V going to VA; 5V going to VB; 3.3V going to 0E, OE active high enable IO recommended by a low voltage side of the IO port.
High-speed shifter, tie the OE pin directly up to 3.3v to WORK.The level converter provide serial interface+ is very easy to use.
Widely used in the communication between 5V SCM and 3.3V device, 3.3V SCM and 5V device. It can also apply in the level conversion between MCU and SD card, MCU and iic/spi serial port devices.
TXS0108E operate in both open-drain and push-pull modes, with max data throughput of about 2Mbps (open-drain) and 60Mbps (push-pull) for 3v3 to 5v translation, serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect.

Rank No. #17

WWZMDiB 4Pcs 4 Channels IIC I2C Logic Level Converter Bi-Directional 5V to 3.3V Buck and 3.3V to 5V Boost for Arduino

💎 Mainly used for buck 5V to 3.3V buck and boost 3.3V to 5V boost
🥇Supports 2.8V and 1.8V devices
🥈Support bidirectional conversion of UART, IIC, SPI and other signals
🥉Support four MOS tubes to achieve four-way 3V and 5V level bidirectional conversion

Rank No. #18

AEDIKO 20pcs 4 Channels IIC I2C Logic Level Converter Bi-Directional 3.3V to 5V Shifter Module

Bi-Directional Transform Module: 4 Channels Logic Level Converter with Bi-Directional, Which Can Step Down 5V to 3.3V and Step Up 3.3V to 5V at the Same Time
Upgrade Version: This Logic Lever Converter Can Set Your High and Low Voltages and Step Up and Down Between Them Safely At The Same Channel
Easy to Use:Each Level Converter has the Capability of Converting 4 Pins On the High Side to 4 Pins On the Low Side with Two Inputs and Two Outputs Provided for Each Side
Instruction:The board Needs to be Powered From 2 Voltages Sources (High and Low voltage). Example:High Voltage (5V) to the “HV” Pin, Low Voltage (3.3V ) to ”LV”, and Power Negative Pole to the ”GND” Pin
Application:4 Channels IIC I2C Logic Level Converter Bi-Directional 3.3V to 5V Shifter Module Works with 2.8V and 1.8V Devices as Well

Rank No. #19

Songhe 4 Channels IIC I2C Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter for Arduino Green Board 10PCS

Rank No. #20

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

The module can support Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B (of course, Zero and Zero-W can also be supported, but only two screw holes can be fixed).
Support RPi I/O 26 ports 3.3V to 5V bidirectional logic level conversion(input or output). But not include ID_SC and ID_SD ports(since ID_SC and ID_SD are used to identify HAT modules, these two ports are not connected to the 5V interface).
If you short blue terminal block, Raspberry Pi 5V will connect to external 5V. You can use an external 5V to power the Raspberry Pi, of course, you can also power external devices from the Raspberry Pi. Two LEDs are used to indicate the Raspberry Pi 5V and external 5V.
Package included: 1x voltage-level shifter module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts.
NOTE: the item not include Raspberry Pi module.

Last update on 2023-08-09 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best ebtech line level shifter?

Do you get stressed out thinking about shopping for a great ebtech line level shifter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching ebtech line level shifter, which is why we have assembled a comprehensive list of the greatest ebtech line level shifter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for ebtech line level shifter that you consider buying. Your questions might include the following:

Is it worth buying an ebtech line level shifter?
What benefits are there with buying an ebtech line level shifter?
What factors deserve consideration when shopping for an effective ebtech line level shifter?
Why is it crucial to invest in any ebtech line level shifter, much less the best one?
Which ebtech line level shifter are good in the current market?
Where can you find information like this about ebtech line level shifter?

We’re convinced that you likely have far more questions than just these regarding ebtech line level shifter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for ebtech line level shifter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible ebtech line level shifter. Make sure that you are only using trustworthy and credible websites and sources.

We provide an ebtech line level shifter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available ebtech line level shifter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of ebtech line level shifter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an ebtech line level shifter?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your ebtech line level shifter.
Customer Ratings: Number ratings grade ebtech line level shifter objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their ebtech line level shifter.
Product Quality: You don’t always get what you pay for with an ebtech line level shifter, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an ebtech line level shifter is should be an indication of how long it will work out for you.

We always remember that maintaining ebtech line level shifter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding ebtech line level shifter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best ebtech line level shifter of 2023 – Reviewed and Top Rated

How Do You Buy The Best ebtech line level shifter?

Related Post: