The Best Ender 3 Extruder Upgrade of 2023 – Reviewed and Top Rated

2,011 Reviews Scanned

Rank No. #1

Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer

Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2，its extrusion gear can be replaced.
Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.

SaleRank No. #2

Redrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with Creality Ender 3 V2 Pro,Ender 3 Neo Series,CR10 3D Printer TPU Filament Supported(Motor Shaft>21.5mm)

【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue.
【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,CR10 S series 3D printer.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.
【Kindly Reminder】:Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height;for Vyper users,please swap the motor wire sequence to make it turn forward instead of reverse

Rank No. #3

Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder

🎈【Quality Assurance】100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
🎈【Work Better】Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
🎈【Improved Performance】The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
🎈【Easy To Install】DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
🎈【After Sales Support】More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via “ask a question” find us directly cause our customer service will respond to you within 24 hours no matter what question.

SaleRank No. #4

Creality Official Ender 3 Direct Drive Upgrade Kit, Comes with 42-40 Stepper Motor Hotend Kit, 1.75mm Direct Drive Extruder Fan and Cables Support Flexible TPU Filament

100% Creality Official - Creality Ender 3 direct drive upgrade kit, compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments.
Easy Assemble - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a full extrusion kit. Come with longer connecting cable, tools, accessories and diagram instruction, easy to assemble.
Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament.
Strong & Sturdy All Metal Hotend - This direct extruder kit is all metal structure, durable and wear resistant and Integrated structure is convenient for wiring and replacing.
Creality 3D Official Store - We are the ONLY Creality 3D Official store. There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifetime technical assistance. Please contact us via “ask a question”directly to get the professional assistance.

SaleRank No. #5

2023 Official Creality Ender 3 Sprite Direct Drive Extruder Kit, All Metal Upgrade Sprite Extruder SE for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/Ender 5 Plus 3D Printers (Ender Version)

✔️Official Direct Drive Extruder for Creality Ender Series: Upgraded Creality Sprite Direct Drive Extruder SE for Ender is Fully Compatible with Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/Ender 5 Plus 3D Printers!2023 Newest Creality Sprite Extruder makes direct drive upgrade a breeze, support you a smoother and more convenient printing experience.
✔️Modular Design for Easy Modification: Use ONLY ONE Mounting Parts & Isolation Columns, Easy Upgrade Your Printer to Direct Drive Setup! Start Direct Drive Printing From Sprite SE! Fits Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/Ender 5 Plus 3D Printers!(NOT Included Ender-3 Max)
✔️High Torque, Smooth Feeding: 3.5:1 Gear Reduction Ratio is to Reach High Torque Output, which not only Improves Printing Speed and Accuracy but also Enhances Controllability, Making Your 3D Prints More Perfect.
✔️Stainless Steel Dual Gear Feeding, Powerful and Stable Printing: Sprite Extruder SE for Ender features a unique stainless steel double-tooth structure combined with 3.5:1 gear reduction ratio, which perfectly matches the motor. This enables extruder force up to 80N, allows for precise control of print feeding.
✔️Weight 210G-Lightest Direct Drive Extruder for Ender Series Printer: The Lightweight Sprite SE Extruder Effectively Reduces Movement Resistance Resulting in Faster and More Powerful Output, Realize More Accurate Flow Control.

Rank No. #6

Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Capricorn Tubing

It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.

Rank No. #7

BIGTREETECH Dual Gear Extruder 3D Printer Extruders Double Gear mk8 extruder Dual Driver Feed for Creality Ender 3/5 Ender 3 V2 CR10S CR-10 Pro CR-10S 3D Printer 1.75mm Filament

⭐Not Easy to Lose Step: The extruder adopts a double-gear double pneumatic joint extrusion structure, which makes the extrusion pressure greater, ensuring smooth feeding and not easy to lose step.
⭐High-quality Material: The product material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from Japan.
⭐Widly Application: Not only suitable for CR10S PRO original machine, CR-10S PRO's original aluminum alloy driver, but also can be installed in Ender-3, Ender 3pro, Ender 5 and so on.
⭐Need DIY by Yourself: For 1.75mm Filament. This Kit NOT include the stepper motor and instruction manual, we need to DIY.
⭐After-sales Service: If you have any questions about the product, you can contact us at any time through Amazon, and we will give you a satisfactory answer.

SaleRank No. #8

Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2

Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.

Rank No. #9

CREALITY Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

💕Upgrade Material - High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use.
💕Stable and Durable-Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original plastic one while working.
💕Easy to Install - All you do is unbolt the old original plastic extruder and screw in the new " Red Metal Extruder ", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame.
💕Wide Compatibility - Red extruder is suitable for Creality 3d printers accessories: Ender 3, Ender 3 V2, Ender 3 Pro, Ender-3 Max, Ender 5 / 5 Plus / 5 Pro, CR-10S, CR-10, CR 10 mini, CR-10 S5, CR-10 S4, CR 20, CR-20 Pro, CR-X.
💕Creality Official Sales: All products are officially sold, genuine and high-quality, please rest assured to buy. All the necessary accessories are included in the package.

Rank No. #10

Creality Official Upgrade Extruder, MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series, Ender 5/5 Plus/Pro, CR-10 Series 3D Printer

COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware.
UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer Extruder with "Metal Anodised Aluminum". The extruder drive upgrade can resolve the under extrusion problem. The silver extruder even has smoother feeding than the RED metal extruder.Creality Official Upgrade Extruder is the perfect replacement
WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. It performs better than the plastic version included in stock printers. It allows you to print flexibles and regular plastic filaments.
EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic extruder. You can assemble it quickly by viewing the assembly diagram.
OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the filament into the printer nozzle to improve the printer's performance. This high-quality all-aluminum construction is guaranteed to last for years, Creality is a brand you can trust!

Rank No. #11

Official Sprite Direct Drive Extruder SE for Neo Series Printer, Dual Gear High Torque Direct Extruder Upgrade Kit for Ender 3 Neo/Ender 3 V2 Neo/Ender 3 Max Neo/Ender 2 Pro (Neo Version)

✅【Sprite Extruder SE - Special Extruder for NEO】The Sprite Extruder SE is the first direct drive extruder specifically designed for the Creality Neo series 3d printer. With the original sprite extruder's advantages of dual gears, high torque and compact size, it is even easier to install, so you can quickly upgrade your Ender Neo to Direct Drive.
✅【3.5:1 Gear Reduction Ratio & High Torque】Adopting a 3.5:1 gear reduction ratio, the Creality Sprite Extruder SE Direct Drive Extruder ensures smooth feed and powerful performance.
✅【Dual-gear Drive & Stable Printing】With a double gear bite structure, this all-metal extruder secures your filament and ensures reliable and steady printing results.
✅【Easy to Install】By using the hotend backplane installation method, all you need to do is to remove the isolation column, Teflon tube and enclosure from the hotend, then insert the new mounting parts and isolation columns. Finally, install the original V-wheel and nuts, and tighten them up. This won't alter the original structure of your hotend and affect CR Touch, so there's no need to update any firmware.
✅【Six Months Warranty】This extruder can be used on Ender 3 Neo/Ender 3 V2 Neo/Ender 3 Max Neo/Ender 2 Pro.YOOPAI provides six months warranty for any issue, and life-time professional technical supports, if you have any issue while using it, please contact us, we will reply you within 24 hours. Follow our flagship store to get the latest product information.

Rank No. #12

Official Sprite Direct Drive Extruder SE, Match with Spider Hotend,All Metal Extruder Upgrade DIY Kit for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/Ender 5 Plus/CR 10 (Ender Version)

✅【Match More Hotends, More DIY Fun】The installation won't change the structure of your hotend, so you can use it with any hotend that's compatible with your printer. Take Ender 3 as an example, by combining Sprite Extruder SE with Creality Spider hotend or Phaetus hotend, you can enjoy high-temperature and high-flow direct drive printing. This is a great way to have even more fun with DIY projects!
✅【3.5:1 Gear Reduction Ratio & High Torque】Adopting a 3.5:1 gear reduction ratio, the Creality Sprite Extruder SE Direct Drive Extruder ensures smooth feed and powerful performance.
✅【Dual-gear Drive & Stable Printing】With a double gear bite structure, this all-metal extruder secures your filament and ensures reliable and steady printing results.
✅【Easy to Install】By using the hotend backplane installation method, all you need to do is to remove the isolation column, Teflon tube and enclosure from the hotend, then insert the new mounting parts and isolation columns. Finally, install the original V-wheel and nuts, and tighten them up. Easy to install.
✅【Six Months Warranty】This extruder can be used on Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/Ender 5 Plus/CR 10.YOOPAI provides six months warranty for any issue, and life-time professional technical supports, if you have any issue while using it, please contact us, we will reply you within 24 hours. Follow our flagship store to get the latest product information.

SaleRank No. #13

CHPOWER Creality Metal Extruder Ender 3, Ender 3 Metal Extruder, Ender 3 Pro Extruder Upgrade MK8 Drive Feed Bowden Extruders for Ender 3 Series, Creality CR-10 Series, Ender 5 Series

UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.
STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence.

Rank No. #14

Creality Official 42-40 Stepper Motor with Extruder Gear, 2 Phase 1A 1.8 Degree 0.4 N.M for 3D Printer Extruder, Compatible with E-axis of Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/CR-10 3D Printer

Official Guarantee: 100% Creality official stepper motor, our 42-40 stepper motor compatibility with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR-10/CR-10s/CR-10 V2/CR-10V3 3D Printer.
Parameter: 1.8-degree step angle, 0.4 N.M holding torque, with 1A rated current per phase. (The connecting cable is not included.)
High-Quality Stepping Motor: With low power, stable speed and performance, low noise, and no step loss during operation, which ensures the stable operation of the extrusion mechanism.
Low Noise & High Precision: It fits perfectly with the high-strength synchronous wheel and synchronous gear, which ensures its high precision, reduces vibration and noise during work, and provides you with a relatively quiet printing environment.
After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

Rank No. #15

Creality Official Sprite Extruder Direct Drive Dual Gear Extruder SE Upgrade Kit, Compatible with Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/Ender 5 Plus/CR 10 3D Printers

⭕Wide Compatibility: The brand new Sprite Extruder SE is designed to be compatible with a wide range of 3D printers, including popular models like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/Ender 5 Plus/CR 10. This enhanced compatibility allows for seamless integration with various 3D printer models, making your modifications more convenient.
✨Durable and Stable: The dual-gear drive ensures the integrity of the filament, providing stable, smooth, and precise filament feeding. Its high-quality all-metal body design is compact, sleek, and efficient in heat dissipation. Despite its lightweight of only 210 grams, it is structurally durable without compromising functionality.
🌈Smooth Feeding and High Torque: The 3.5:1 gear ratio enhances filament extrusion performance, resulting in smoother printing. The tension is adjustable, allowing you to fine-tune the pressure applied to the filament by the drive gear according to your preferences, leading to exquisitely detailed models.
❤️Easy Installation: Simply secure it onto the mounting bracket following the installation manual, making installation easier compared to other extruders. The package includes all the necessary parts for installation. Please note: The hot end is not included, but the extruder is compatible with the original hot end, providing more DIY possibilities. Minor variations may occur with other modified hot ends, but they will not affect functionality.
🌸Creality Official Store: We are the official Creality store, provide 100% Creality Original 3d printers and accessories, offer 24/7 customer service along with lifetime technical assistance. Please feel free to contact us directly using the "ask a question" feature for professional assistance.

Rank No. #16

Authentic F1rst Layer Upgraded Dual Gear All Metal Extruder for Ender 3 / Pro/Ender 5 / Pro and All CR Series Printers - 1M Capricorn PTFE Tubing, Premium Bed Springs and Fittings Accessories Kit

ENDER 3 SERIES PRINTERS (ONLY) MADE IN 2021 ARE NOT COMPATIBLE WITH THIS PRODUCT. This original dual gear extruder design with BondTech Technology will instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together by a dual gear rotating design. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which can feed much more filament into the hotend.
Change e steps/mm to 144.22 after install. Two precision machined gears are included with a matching threaded groove on the top of each gear which ensures both sides rotate at the same time to apply even pressure on the filament as is is being extruded into the hotend. This steady and even pressure helps make for more consistent extrusion from the hotend. Tensioner spring can be adjusted to reduce or increase the amount of force the lever arm puts on the filament.
Capricorn PTFE is high quality Teflon tubing manufactured in America to high quality control standards. Tight tolerances within .05mm keep the filament from bending any little bit while inside the tube which makes retraction much more accurate and consistent. The XS line of Capricorn PTFE tubing is also capable of withstanding temperatures of up to 230*C all while remaining very slippery so the filament glides through the tube with almost no resistance.
After market Creality bed springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs originally used on CR model printers. 4PC-M10 fittings are also included for replacement use on any stock creality hotends as well as this dual gear extruder which also uses a PC4-M10 fitting to secure the PTFE tube.
INSTALLATION GUIDE IN PRODUCT DESCRIPTION BELOW. Once the extruder is installed, manually change the e steps/mm in the Marlin firmware to 144.22 steps/mm by going to Control>Motion>Steps/mm in the Menu. F1rst Layer is happy to answer any questions you may have about this product. Please feel free to contact us on Amazon and we will reply promptly. Compatible Printer Models Include: CR-10/ CR-10S / CR-10S Pro/ CR-6SE/ Ender 3 / Ender 3 pro / Ender 5 / Ender 5 pro/ Tornado

Rank No. #17

Ender 3 Extruder Dual Gear Upgrade CR10S PRO Extruder Blue Compatible for Creality Ender 3/Ender 3 Neo/Ender 3 V2/Ender 3 Pro/CR10/CR10S CR10S PRO 3D Printer 1.75mm Filament Extruder,

True dual gear. Just remember to calibrate your Esteps after installing this item. After installation,it is recommended to set E-steps to 139,Then adjust according to the specific situation.
This Dual Drive Gear Extruder Compatible for 3D Printers FDM 1.75mm Filament Creality CR-10S PRO, CR-10, CR-10S, Ender 3 V2, Ender 3 Pro, Ender 3, Ender 5,etc.
This 3D Printer extruder Motor Shaft Over 20mm: Please check carefully if the motor shaft height is over 20mm,so it will have enough lenght to install the extruder outgoing drive gear.
This Ender 3 Dual Gear Extruder Ideal for filament extruder ABS PLA Wood TPU PTEG,etc. 3pcs 3D Printer Springs, 3 different spring pressures meet most types of wire (hard or soft) feed requirements.
This Upgraded CR10S PRO Metal Double Gear Extruder, Stainless Steel Drive Gear. This is a solid, reliable, easy to use extruder that dropped .

Rank No. #18

Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover×3, 0.4mm Ender 3 Nozzle×3 and 2 Pair Pneumatic Couplers

It's 100% Creality Original Upgrade Assembled Extruder Hotend.
Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
With more terminal housing and pins as spare parts, in case fail installation and waste.
MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.

SaleRank No. #19

Comgrow Upgraded Ender 3 Extruder, Ender 3 V2 Metal Extruder Aluminum MK8 Bowden Extruder Drive Feeder, 3D Printer Parts for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/CR-10/CR-10S

Wide Compatibility-The ender 3 extruder upgrade comes with the small pneumatic connector. This creality extruder feeder drive is compatible with nearly all models of 3D printers, no need to change stepper motors or other mounting hardware. Perfect fit for Creality Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, Ender 5 Pro, CR-10, CR-10S 3D Printers.
High Quality-40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG. Made of high-quality aluminum, makes the filament loading easier, with no worries about filament scraping or breaking.
Easy To Install-Full metal aluminum alloy, DIY kit and you need to assemble by yourself. The Ender 3 metal extruder includes all the necessary screws & parts you needed. All you need to do is to unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and be ready to start printing.
Upgraded Performance-The creality ender 3 upgrades make it have better stronger pressure pushing the filament into the printer nozzle, and greatly keeping the metal extruder retaining power in filament feed-in.
After-Sales Service-If you have any unsolvable problems during installation and use of the 3d printer extruder, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

SaleRank No. #20

Creality Sprite Direct Drive Extruder Pro Kit, All Metal Extruder Upgrade Kit for Ender 3/Ender 3 v2/Ender 3 Pro/Ender 3 Max 3D Printer,Dual Gear Dual Fan Design,Support BL Touch/CR Touch

【All Metal Design-High Temperature Printing】Creality Sprite direct drive extruder pro kit perfectly combine extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions.
【Dual Gear Feeding- Powerful & Stable】This direct drive extruder adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extruder force up to 80N. More precise control of feeding withdrawal.
【Small and Exquisite, Bowden & Direct Extrusion Suitable】With Compact and light weight design, 54x50x64.3mm small size, 288g weight. It can be applied to direct and bowden filament feeding to meet printing needs of users at dirct and bowden extrusion. Better effect for PLA, PETG,ABS, TPU and other flexible filament.
【Dual Fan-Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation. High quality silent fan with metal fan cover, ensures safety when high temperature printing.
【Compatible With Ender 3 Series 3D Printer】 Creality sprite direct extruder is compatible with Creality Ender3, Ender3 v2, Ender3 Pro and Ender3 max, both 4.2.2 and 4.2.7 control board available. This kit also comes with a CR/BL touch cable. During use, if you have any question, please contact us and we weill reply you within 24 hours.

Last update on 2023-08-04 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Ender 3 Extruder Upgrade?

Do you get stressed out thinking about shopping for a great Ender 3 Extruder Upgrade? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Ender 3 Extruder Upgrade, which is why we have assembled a comprehensive list of the greatest Ender 3 Extruder Upgrade available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ender 3 Extruder Upgrade that you consider buying. Your questions might include the following:

Is it worth buying an Ender 3 Extruder Upgrade?
What benefits are there with buying an Ender 3 Extruder Upgrade?
What factors deserve consideration when shopping for an effective Ender 3 Extruder Upgrade?
Why is it crucial to invest in any Ender 3 Extruder Upgrade, much less the best one?
Which Ender 3 Extruder Upgrade are good in the current market?
Where can you find information like this about Ender 3 Extruder Upgrade?

We’re convinced that you likely have far more questions than just these regarding Ender 3 Extruder Upgrade, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Ender 3 Extruder Upgrade, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ender 3 Extruder Upgrade. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Ender 3 Extruder Upgrade buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ender 3 Extruder Upgrade currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Ender 3 Extruder Upgrade has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Ender 3 Extruder Upgrade?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Ender 3 Extruder Upgrade.
Customer Ratings: Number ratings grade Ender 3 Extruder Upgrade objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ender 3 Extruder Upgrade.
Product Quality: You don’t always get what you pay for with an Ender 3 Extruder Upgrade, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Ender 3 Extruder Upgrade is should be an indication of how long it will work out for you.

We always remember that maintaining Ender 3 Extruder Upgrade information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Ender 3 Extruder Upgrade is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Ender 3 Extruder Upgrade of 2023 – Reviewed and Top Rated

How Do You Buy The Best Ender 3 Extruder Upgrade?

Related Post: