Contents

20 Best Engine Support Bar Advance Auto of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Engine Support Bar Advance Auto of 2023. Check our ranking below.

2,540 Reviews Scanned

Rank No. #1

VEVOR Engine Support Bar 1100 Lbs Capacity Engine Transverse Bar Engine Hoist 2 Point Lift Holder Hoist Dual Hooks, Engine Hoist Keeps Engine Stable for Home Garages & Auto Repair Shop

【1100LBS LOAD CAPACITY】- Holding capacity: 1100 lbs. This engine support bar can precisely position and support the engine while working on the transmission or holds the transmission in place while removing the engine for rebuilding.
【HEIGHT ADJUSTABLE】- The maximum lifting height of the engine transverse bar is 7.87 inches for easy repair and clean the engine. Turn the handle to raise or lower the motor at the proper height according to your requirements.
【TWO TRIANGLE SUPPORTS】 - Two black triangular supports on the beam are adjustable. You can place them in the appropriate position. The width of the beam is 59.06 inches, so the engine support bar is suitable for vehicles with a width of fewer than 59.06 inches.
【STURDY & DURABLE】- The engine hoist includes two iron chains to bind the engine for security landing. The engine support bar is made of heavy-duty steel with a protective powder coat finish, high rigidity, and resistance.
【WIDE APPLICATION】- This transverse engine support bar is suitable for lifting and down almost all types of car engines, including sports cars, SUVs, sedans, and so on.

Rank No. #2

HECASA 1100 Lbs Engine Support Bar Engine Transverse Bar Engine Hoist for Engine Transmissions, Home Garages & Auto Repair Stores Keeps Engine Stable and Lifted w/2 Point Lift Holder Dual Hooks

Wide Range Of Application: This engine support bar is suitable for lifting almost all passenger car engines and transmissions for repair and cleaning, including cars, SUVs, sports cars, etc. 1100 pounds of maximum weight capacity is enough to support the engine.
Two Rotating Hoists: You can adjust the height by turning the handle to lift the engine up to 7.87 inches, depending on your actual needs. You can also adjust the length of the chain that secures the engine to ensure a safe lift.
Two Support Bases: The width of the beam is 59.1 inches, only for vehicles that are narrower than that. The crossmember comes with a triangular base on each side, and you can adjust their placement according to your vehicle. The non-slip feet on the bottom reduce noise when moving and also prevent scratching of the vehicle.
Sturdy Construction: Heavy-duty steel construction with high wear resistance and durability to withstand high-intensity use. The exterior of the engine support bar is powder coated to resist rust, ensuring it will support your engine or transmission for a long time.
Easy To Use: Instructions are not included. A complete set of engine support bars can firmly support the engine. All you need to do is place the triangular base in the appropriate position, secure the engine with a chain, rotate the handle to adjust the height and start a safe repair.

Rank No. #3

KUAFU Engine Support Bar 1100lbs Capacity Motor Transverse Bar with 2 Points Lift Holder Dual Hook Cross Hoist Engine Hoist for Home Garages & Auto Repair Shop

Strong Weight Capacity - Thickened steel frame structure, bearing capacity up to 1100lbs. The engine support bar is designed to position, lift or support the engine while checking the transmission.
Superior Build - The engine support bar is made of thickened steel plate and equipped with thickened chain for binding the engine and ensuring the safe landing of the motor. Powder coated surface ensures long-term use without rust.
Universal Design - Suitable for a variety of scenarios, such as auto repair shops, home garages. Its adjustable design also ensures that it can lift almost all types of car engines.
Durable & Sturdy - Each side of the support bar has a knob and a stable triangular base. Non-slip rubber feet at the bottom of the triangular base provide high protection for the body support parts on both sides. Adjustable Height: 0- 8.07 in.
Easy to Operate - First, place the base in the right place, then fix the engine with chains, and then turn the rotating hoists to easily hang the engine. The support is easy to store and takes up little space when not in use.

SaleRank No. #4

ATD Tools 7477 Engine Transverse Bar with Arm Support

Package Dimensions: 11.176 H x 103.124 L x 13.97 W (centimeters)
Package Weight: 27.45 pounds
Country of Origin : China

SaleRank No. #5

SPECSTAR 1100 Lbs Engine Support Bar Transverse Hoist for Motor Transmission with 2 Points Lift Holder and Dual Hooks

STURDY & DURABLE - The SPECSTAR engine support bar is made of high-quality steel with a protective powder-coated finish, which is in high rigidity and wear-resistant; The heavy duty materials are reliable that can decrease the loss and ensure safe operation and prolonged usage
STRONG LOAD CAPACITY - This transverse bar can carry up to 1100 lbs. that is suitable for lifting up and down of almost all types of car engines including sports cars, SUVs, sedans, and so on; It can precisely locate and support the engine, making repair and clean become easier
ACCURATE FINE-TUNING HEIGHT - The lifting height of 2 rotating hoists on the engine holder bar can be adjusted from 0 to 7.9 inches, and it is available to maintain altitude for a long time; Equipped with a knob and stable triangular base on each side, the range between the 2 bases can also be changed from 21 to 59.1 inches, so it applies to vehicles that width is less than 59.1 inch
PREMIUM FEATURES - The overall dimension of this solid engine brace is 59.1” (L) x 8.7” (W) x 7.9” (H); It comes with double strong iron chains that ensure the safe landing of the motor, which is handy for doing engine mounting; The non-slip thickened rubber feet on the bottom of the triangular base can effectively reduce noise when moving and prevent scratches on the car
EASY TO OPERATE - First, place black triangle support bases in the appropriate position, then fasten the engine with iron chains, and turn rotating hoists to raise or lower the motor to the proper height based on your needs; Designed with rubber materials on round knobs and hoist handles, which can protect your hands in use

Rank No. #6

Goplus® 1100lbs Engine Support Bar Transverse for Motor Tranny Transmission w/ 2 Points Lift Holder Hoist Dual Hooks

【1,100Lbs Weight Capacity】This engine support bar has a 1,100 pounds capacity and it weighs 32Lbs.
【Durable Construction】The main construction is made of heavy duty steel with powder coat paint finish which ensures long term durability. The end of the long handle is made of plastic which make it more comfortable to use.
【6 Sizes of Punches to Choose】It has 6 dies and punches of different sizes to meet different needs for different engine sizes.
【2 Chains Included】The package includes two chains to bind the engine for safe landing.
【Size Info】Overall Dimensions: 59" (W) x 9.5" (D) x 12.5" (H).

Rank No. #7

OEMTOOLS 24951 3 Point Engine Support Bar, Steel Construction, Transverse Engine Support Tool, Two Screw Hooks, Engine Bar Can Handle Off-Center Loads

SAFETY IN YOUR SHOP: Transverse bar expands and contracts for a snug fit; Securely holds your engine in place while you work; 700 Lb. capacity makes it ideal for nearly any load
PRECISE HANDLING: Hook screws are adjustable to a wide range; The 3 point support system is capable of handling off-center loads; Braided steel engine hanger cables are strong enough to keep your engine or transmission stabilized
EASILY ADJUSTABLE: With everything you need included in the engine hoist bar kit, the design of the transverse engine support bar allows for multiple configurations to suit any project
RELIABLY MADE: Each engine lift component is constructed of steel with a more subtle profile, while still maintaining performance integrity; This 3 point engine support bar is built to last even through the toughest repairs
PRODUCT SPECIFICATIONS: Transverse bar expands from 34 1/2” to 61”; Steel construction; Includes (2) 14” adjustable engine hoist screws and (2) 1/8” x 38” Braided Steel Cables

Rank No. #8

OTC 4324 Stinger 1100 lbs Capacity Engine Support Bar

Engine support bar has a 1100 pounds capacity
Adjustable width of 57 inch x 27 inch
Features two hook assemblies for ease of use and tubular steel construction for long life
Rubber padded support legs ensure stability during use
Comes with two 36 inch chain assemblies

SaleRank No. #9

Omega 44700 Black Engine Transverse Bar with Arm - 700 lb. Capacity

Two 14 inches adjustable hook screws
Width expands from 38 inches to a full 61 inches
700 pounds capacity adjustable transverse bar
Two 38 inches braided steel cables 1/8 inch diameter included

SaleRank No. #10

Performance Tool W41018 Adjustable Engine Support for Vehicle Maintenance, Yellow, 700-lb Capacity

700lb capacity, with adjustable width from 40 inches to 54 inches
Center support screw has a travel of up to 12 inches
Adjustable extension arms with protective feet straddle the inner fender wells
Colored to help keep your drums organized

Rank No. #11

JEGS 80389 Engine Support Bar 1100 lb. Capacity

Capacity: 1100 lb.
Adjustable Range: 27" to 57"
Dual Center Support w/ 10" Travel
Rubber Padded Support Feet
Tubular Steel Construction

Rank No. #12

Drake Off Road 5,500 lb Capacity Engine Lifting Bracket Kit - Support Bar Included - Ideal for Lifting Slings & Load Levelers - Tools Category 71004

The Drake Off Road Engine Lifting Bracket Set is a valuable tool for hoisting heavy engines or other bulky parts, making it a must-have for workshops and garages. This Engine Lifting Bracket Kit set is perfect for transforming heavy equipment and lifting heavy loads with ease. It's a reliable and durable addition to any mechanic's toolkit, capable of bearing a load of up to 5,500 pounds.
The Engine Support Bar is a versatile tool that can be bolted directly onto the lifted component, making it ideal for lifting most engines and heavy parts. When paired with load levelers and lifting slings, it becomes even more effective. Not only can it be used for lifting heavy components, but it also has a variety of other uses. An essential addition to any workshop or garage, this tool is designed to make maintenance and repair work easier and more efficient.
The Lifting Bracket Kit is a strong and durable tool, crafted from high-quality steel material. It's designed to lift heavy components such as engines, transmissions, and radiators in workshops and garages with ease. With its impressive strength and durability, this Engine Lifting Bracket Kit set is a reliable and long-lasting addition to any mechanic's toolkit.
The Engine Stand is built to handle heavy loads with an impressive load capacity of 5,500 pounds. Its durable and resilient construction makes it a valuable tool for any project. This Engine Lifting Bracket Kit set is designed to withstand the demands of workshops and garages, making it a must-have for any mechanic. It's a reliable and long-lasting addition to any toolkit, capable of making maintenance and repair work easier and more efficient.
This Lifting Bracket Set comes in a pair of two brackets, each capable of accommodating bolts with a maximum diameter of 1/2 inch. This feature ensures a secure and stable lift, making it a reliable choice for any heavy lifting task in workshops and garages. This Engine Lifting Bracket Kit set is a must-have addition to any mechanic's toolkit, designed to make lifting heavy loads safer and more efficient.

Rank No. #13

Flexzion Engine Support Bar 1100 Lbs 2 Points Lift Holder Hoist Gearbox Steel Mount Stand with Dual Hooks and Rubber Padded Support Legs for Motor Tranny Transmission Transaxle Repair

Two adjustable holders from 0? to 55?; Two adjustable slider bolts on Bar
Hassle-Free Disconnections on Fuel, Fluid, and Electrical Lines
Hold your engine while repairing gearbox, changing engine mounts and much more; Supports engine or transmission in place during repairs
Dual hook assemblies for holding engine or transmission balanced support; Rubber padded support legs prevent slips and paint damage
Comes with two 34 inch chain assemblies with handles

Rank No. #14

HUMZOR NC610 OBD2 Scanner，Car/Heavy Duty Truck Scanner Car Code Reader Diesel Diagnostic Tool, Full OBDII Function - 2 in 1 Auto & Truck Engine Light Clear Check Fault Diagnostic Scan Tool.

【2024 Newest OBD2 Scanner Diagnostic Tool】NC610 car scan diagnostic tool adopts new smart chip and latest user interface design, which perfectly combines OBDII 16-pin and 9-pin (gasoline and diesel). This OBD2 car code reader can easily determine why the check engine light is on, quickly read and erase diagnostic trouble codes, freeze frames, I/M monitor ready status, battery test, smoke test, fuel test, trouble code query library (50000+), read data stream and data playback function.
【Heavy Duty Truck Diagnosis + Powerful Data Streaming】: HD OBD heavy duty truck scanner can quickly read engine fault codes (stored fault codes, intermittent, permanent, recorded fault codes) and clear codes, retrieve vehicles Information as well as complete data streams, classify data streams Display real-time vehicle sensor data in text and graphs so you can view them more intuitively. Suitable for Cummins, Caterpillar, Detroit, Packard and other diesel engines with 9-pin connector.
【Vehicle coverage】: OBD2 scanner is suitable for most OBDII-compliant vehicles updated after 1996 (OBDII protocol//16-pin diagnostic interface: J1850 (PWM, VPW), ISO_9141-2, ISO_14230-4 (KWP , KWP-5BPS), ISO_15765-4 (CAN, CAN-B, CAN-C, CAN-D)) Compatible vehicles - cars, light trucks, pickups, SUVs, etc. Compliant with J1939 protocol // 9-pin diagnostic interface for light and heavy trucks, engineering vehicles, agricultural vehicles, buses, etc.
【The latest design】: Humzor NC610 car OBD2 scanner adopts the latest interface and 2.8" large screen, long-term use will not cause eye fatigue. It is also equipped with three fault indicator lights to display the status, so that you can understand the vehicle status more intuitively and at the same time can execute the car Battery Voltage Test - 12V/24V.
【Instructions for use】: NC610 OBD2 car code reader is delivered with a portable tool box and a 9-pin connector. If you encounter any problems when using the NC610 professional scanning tool, you can directly contact us through Amazon Support or send us an email, and we will provide you with professional technical support. We provide hassle-free return service If you are not satisfied with the product, you can contact us directly, we will provide you with efficient after-sales service.

SaleRank No. #15

Sunex International 5207 Engine Transverse bar with Arm Support

Country of Origin:China
Package length:40.5"
Package width:6.0"
Package height:5.0"

SaleRank No. #16

SINGARO Car Battery Terminal Connector, 4 Way Positive and Negative Pole Quick Release Terminal Clip, Applicable to SAE/JIS A Type Terminal Post, Compatible with Cars, Trucks and More（Gold-A）

High-Quality: Made of tinned copper, it has 4 ports for multiple cable connections, with good electrical conductivity and corrosion resistance, mainly used for SAE / JIS TYPE A rear car battery.
Widely Applicable: Our battery terminal connectors suitable for cars, vans, motorhomes, caravan, truck batteries, etc. Please be sure to connect correct terminal to correct polarity.
Size: For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4). Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, mini wire clamp: 6.5mm/0.25in. Positive inner diameter: 17.5~19.1mm, negative inner diameter: 15.9~17.5mm.
You Well Get: Package contains 2 battery terminal connectors (positive and negative), 4 insulation sleeves, 4 Terminal block , 1 Battery Terminal Cleaners, 2 battery anti-corrosion washers and a hex wrench.
Enjoy Warranty: You will get quality products, if you have any questions, please contact us, we are always waiting for you here.

Rank No. #17

ESEWALAS 10FT Fuel Line Hose,3/8 5/16 1/2 5/8 1/4 Inside Diameter NBR Fuel Line Hose,Fuel Systems Engines Hose Braided Rubber Fuel Line Hose,Used in Fuel System,Oil Cooling (5/16 Inch, 10FT)

[Durable Material] The oil and gas fuel pipeline hose adopts a sandwich design, and the inner and outer pipes are made of high-quality nitrile rubber. In the middle layer, nylon braided wire provides better support, making the fuel pipeline more elastic and less prone to leakage. Durable, corrosion-resistant, suitable for long-term use.
[Specification]Working pressure: 10BAR. Burst pressure: 30BAR. Temperature range: -20 ° C~+100 ° C.
[Flexible and Customizable]The length of the fuel hose is 10 feet, which is sufficient for you to cut as needed. We offer a variety of inner diameter hoses for you to choose from: 3/8 5/16 1/2 5/8 1/4. You can purchase according to your needs.
[Applicable] The fuel pipeline can work together with gasoline/oil/grease/water and air.
[Widely Used] Rubber fuel pipelines are widely used in fuel systems, oil cooling, steam emissions, and PCV systems. Please check the application pressure before purchasing.

Rank No. #18

Evan-Fischer Radiator Support Compatible with 2008-2013 Nissan Rogue Side Upper Tie Bar Black Steel Driver Side

Direct Replacement Radiator Support Compatible with 2008-2013 Nissan Rogue and 2014-2015 Nissan Rogue Select
Evan-Fischer EVA20772045796 Features: Upper Tie Bar
Replaces OE Number: 62513JM00A and Replaces Partslink Number: NI1225188
A high quality, Direct Fit OE Replacement Radiator Support, with FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store

Rank No. #19

Evan-Fischer Radiator Support Compatible with 2016-2018 Toyota Prius Upper Tie Bar Driver Side

Direct Replacement Radiator Support Compatible with 2016-2018 Toyota Prius and 2017-2018 Toyota Prius Prime
Evan-Fischer EVA179101216908 Features: Upper Tie Bar
Replaces OE Number: 5321447050 and Replaces Partslink Number: TO1225430
A high quality, Direct Fit OE Replacement Radiator Support, with FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store

Rank No. #20

DREAMIZER 2× Universal Front Bumper Lip Support Splitter Rods Adjustable 8"-11" Strut Tie Bar Support Car Body Kit Support Rear Wing Strut Rod for Sports Car Street Car - Black

The length can be adjustable from 8" to 11"
Product will require drilling holes into the bumper and/or lip/diffuser to attach safely to the vehicle
Can be installed at any angle to increase the beauty of the car appearance
It can be connected with the front lip bumper or the rear spoiler, and the reinforcing element is not easy to fall
Made of quality aluminum alloy, sturdy, durable

Last update on 2023-08-31 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Engine Support Bar Advance Auto?

Do you get stressed out thinking about shopping for a great Engine Support Bar Advance Auto? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Engine Support Bar Advance Auto, which is why we have assembled a comprehensive list of the greatest Engine Support Bar Advance Auto available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Engine Support Bar Advance Auto that you consider buying. Your questions might include the following:

Is it worth buying an Engine Support Bar Advance Auto?
What benefits are there with buying an Engine Support Bar Advance Auto?
What factors deserve consideration when shopping for an effective Engine Support Bar Advance Auto?
Why is it crucial to invest in any Engine Support Bar Advance Auto, much less the best one?
Which Engine Support Bar Advance Auto are good in the current market?
Where can you find information like this about Engine Support Bar Advance Auto?

We’re convinced that you likely have far more questions than just these regarding Engine Support Bar Advance Auto, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Engine Support Bar Advance Auto, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Engine Support Bar Advance Auto. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Engine Support Bar Advance Auto buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Engine Support Bar Advance Auto currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Engine Support Bar Advance Auto has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Engine Support Bar Advance Auto?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Engine Support Bar Advance Auto.
Customer Ratings: Number ratings grade Engine Support Bar Advance Auto objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Engine Support Bar Advance Auto.
Product Quality: You don’t always get what you pay for with an Engine Support Bar Advance Auto, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Engine Support Bar Advance Auto is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Engine Support Bar Advance Auto information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Engine Support Bar Advance Auto is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What does an engine support bar do for a car?

A: The engine support bar comes with everything needed to perform work on your engine or transmission, including a steel beam. The rubber padded support legs prevent slips as well as damage to paint. Supports engine or transmission in place during repairs.

Q: What does a 1000 lb engine support bar do?

A: Constructed of heavy-duty powder coated steel for durability, the 1000 lbs. capacity engine support bar lets you work on heavy automotive repairs such as removing the transmission or transaxle. The engine support bar comes with everything needed to perform work on your engine or transmission, including a steel beam.

Q: What kind of steel is an engine support bar made of?

A: Constructed of heavy-duty powder coated steel for durability, the 1000 Lbs. capacity engine support bar lets you work on heavy automotive repairs such as removing the transmission or transaxle. The engine support bar comes with everything needed to perform work on your engine or transmission, including a steel beam.