20 Best Fan Clutch Holding Tool of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Fan Clutch Holding Tool of 2023. Check our ranking below.

2,418 Reviews Scanned

Rank No. #1

GEARWRENCH Universal Pulley Holder - 3900 15 Inch

Unique Time Saving Tool is Designed to Trap and Hold Bolt-On Pulleys By the Mounting Bolts on Most Applications
When Used in Conjunction With Fan Clutch Wrenches it is Especially Useful in Removing and Replacing Thermostatic Fan Assemblies
Applications for Use in Fan Clutch Removal Include: Ford Trucks W/2.8-L, 2.9-L, 3.0-L, 4.0-L, 4.9-L, and 5.0-L Engines
Dodge Trucks W/3.9-L, 5.2-L, 5.9-L, 8.0-L and V10 Engines
GM Trucks W/4.3-L, 5.0-L and 5.7-L Engines

Rank No. #2

Alltooetools Universal Camshaft Pulley & Fan Clutch Removal Holder Set Clutch Alignment Tool

Designed to remove and install fan clutch and rotate or restrain the camshaft pulley.
Four different size step pins are interchangeable. Adjustable jaw spread.
Long handle enables technician to easily hold the pulley when tightening or loosening retaining bolts.
Wrench is adjustable from 1.5" to 8.7".
NOTICE: 2 kinds of packages are shipped randomly: 1 Blue case: 22.13*3.74*2.16inch; 2 Red case: 28.15*3.74*2.16inch.

SaleRank No. #3

ZKTOOL 32mm & 36mm Fan Clutch Wrench Set,Water Pump Pulley Holder Removal Tool For BMW, Ford, GM, dodge,Chevrolet,jeep Fan Clutch Removal Kit,Water Pump Holder, Nut Water Hub Removal.

Precise Vehicle Compatibility: Fan clutch wrench tool compatible with BMW,Ford,GM, Chevrolet,such as E46, E36, E30, E39, E46, E54, E1997, 328i,330i, 533i,530i, 540i, 325i, M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32, and 1997 Z3 1.9 ECT
Effortless Fan Clutch Removal: fan clutch removal tool includes 32mm and 36mm fan clutch wrenches, along with a Fan Pulley Holding Tool, to facilitate the removal of temperature-dependent viscous fan clutches. This set is your ideal fan clutch removal tool kit, enhancing your engine maintenance capabilities.
Durability and Comfort: The 15-inch fan clutch removal tool wrench and holder are elongated to provide extra leverage and a secure grip, ensuring effective operation on hard-to-reach fan clutch nuts. The middle handle is covered with rubber, reducing hand fatigue during prolonged use, ensuring both durability and comfort.
USER-FRIENDLY DESIGN: This kit includes a pulley retention bar that easily locks to the water pump surface, providing a secure base for fan clutch removal. To operate, place the fan clutch wrench on the fan clutch nut and turn it clockwise using a 32mm or 36mm wrench (both included in the kit). If the tool's hole size is smaller than the bolts that secure the pulley to the water pump, remove the bolts and easily reinstall them on the rod.
Essential for Mechanics: Bid farewell to time-consuming and frustrating clutch fan removals. The ZKTOOL Fan Clutch Removal Tool Set streamlines water pump and fan clutch replacements. This indispensable set significantly reduces maintenance time, saving you both time and effort.

Rank No. #4

OEMTOOLS 27171 Adjustable Fan Clutch Holding Tool, Fan Clutch Removal Tool, Fan Clutch Puller, OEM Fan Clutch Tool, Fan Clutch Pulley, Fan Clutch Set

SPEED UP YOUR REPAIRS: Add the fan clutch holding tool to your fan clutch removal tool kit to quicken your repair process; Designed to hold fan clutch with less work
ADJUSTABLE JAW: The clutch fan removal tool features adjustable jaws that fit most water pump pulley bolt patterns, including pressed-on pulleys; Jaws on the universal fan clutch removal tool lock in place, securing water pump bolts
EXTRA LEVERAGE: The longer, high-visibility red handle on the fan clutch removal tool provides leverage for extra torque, helping to eliminate physical strain
ELIMINATE NEED FOR MORE TOOLS: The clutch fan tool for your fan clutch removal kit is way more effective than trying to use a pry bar or wrench to hold the fan clutch
MORE THAN ONE PULLEY: The fan clutch holder for your clutch fan tool kit also holds the camshaft pulley when replacing cam belt; The OEM fan clutch removal tool is versatile

SaleRank No. #5

GEARWRENCH Fan Clutch Service Set, Fan Nut Wrenches, Pully Holder, Blow Mold Case- 41580D

Covers most vehicles with bolt on pulleys and also newer Chrysler engines with press on pulleys requiring special pins to hold housing
Features the patented universal pulley holder
Black oxide coating to resist corrosion

Rank No. #6

ATPEAM 32mm & 36mm Fan Clutch Wrench Set Water Pump Holder Removal Tool Fan Clutch Nut Wrench Set Fan Clutch Removal Tool Nut Water Hub Removal Compatible for BMW Mercedes-Benz Ford GM

【Premium Quality】The 32mm & 36mm fan clutch nut wrench set is made of high-strength steel, with precise dimensions, which has strong hardness wear resistance and not easy to be broken or bent. There is a layer of rubber in the middle part, rust-proof and does not hurt your hands, feels more comfortable to use.
【Specifications】The fan clutch nut wrench includes two size, 32mm & 36mm, very easy to use. The nut water hub removal tool has passed rigorous engine tests and is fully fitted, which is more practical than similar tools on the market. This 32mm& 36mm long-reach wrench and water pump pulley holding tool make replacing your water pump or fan clutch a fast and easy job.
【High Performance】The 32mm & 36mm fan clutch wrench set is used to disassemble water pump on models with temperature dependent viscosity drive fans, removing lock nuts on the thermo-Viscous fans. The water pump holder removal tool keeps the water pump pulley in place while loosening the radiator fan.
【Easy to Use】Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut and loosen the fan clutch nut by turning clockwise using 32 mm and 36 mm spanner to undo nut. If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
【Wide Application】Our ATPEAM fan clutch removal tool is compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 S54. Also compatible with certain Ford, GM Mercedes and Chevrolet models. This is a two-piece multi-tool you'll love, it's more affordable and better quality.

Rank No. #7

BILITOOLS Fan Clutch Removal Tool Kit, Fan Clutch Wrench Set 22 36 40 47 51 MM with Pulley Holder

The fan clutch removal tool kit consists of 5 fan clutch wrenches in various sizes (22mm, 36mm, 40mm, 47mm, 51mm) and a pulley holder equipped with four pairs of pins.
This specialized fan clutch tool kit is specifically designed for removing and installing fan clutches during repairs or replacements of water pumps, timing chains, or fan clutches.
The pulley holder, along with its four sets of replacement pins, is designed to securely trap and hold bolt-on pulleys using the mounting bolts. It is compatible with most vehicles and newer Chrysler engines that have press-on pulleys requiring special pins for housing retention.
Constructed from forged steel, this fan clutch tool kit offers exceptional strength, while its black finish provides enhanced corrosion resistance, ensuring long-lasting durability.
The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect.

Rank No. #8

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. For 5.3 & 6.0 LS engines you would be better lock down the bald pulleyThe holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money.
FITS YOUR VEHICLE★-NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, NOT FIT Chevy models chevy astro van & 2003 Ford F150 5.4 engine , but not limited to.Fan clutch wrench tool is kit compatible with BMW E46 E36 E30 E36 E39 E46 E54 E1997 328i 330i 533i 530i 540i 325i M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 1997 Z3 1.9 and compatible with 2001 Chevy blazer / 07 Hino / 5.7 Vortec / 02 Sport Trac /93 Ranger/Ford 4.0 liter / 2004 and 2003 Ford
BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us.
EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
MUST HAVE TOOL FOR MECHANICS ★- Save yourself time and frustration when removing your clutch fan with this NexADD fan clutch removal tool set.This 32mm& 36mm long-reach wrench and water pump pulley holding tool make replacing your water pump or fan clutch a fast and easy job. The NexADD fun clutch wrench set your best assistant. Just Add To Cart!

Rank No. #9

GEARWRENCH 4 Pc. Pulley Holder & Fan Clutch Tool Kit - 3472

Country Of Origin: China
Model Number: 3472
Item Package Dimension: 26.0" L x 4.13" W x 1.88" H
Item Package Weight: 4.5 lb

Rank No. #10

Drake Off Road Tools Universal Fan Clutch Water Pump Pulley Holding Tool

Schley Universal Fan Clutch Wrench
Drake Off Road Tools
manufacturer: Drake Off Road Tools

Rank No. #11

TEXALAN(R Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

[APPLICATION]: The 1.26-inch (32 mm) and 1.42-inch (36 mm) fan clutch wrench kits with fan pulley fixing tool remove the lock nut of the thermally viscous fan that changes with temperature, the fixing rod fixes the water pump pulley in place and loosens the radiator fan at the same time.
[SUITABLE FOR YOUR VEHICLE]: Compatible with engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54; the bar has 3 holes of 0.5inch (13mm) in diameter and 1 hole of 0.94 x 0.47inch(24x12mm), 1PC 1.3 x 0.43inch(33x11mm) and 1PC 1.5 x 0.98inch(38x25mm) semi-circular groove.
[DURABILITY]: Made of 0.2 inch (5 mm) thick vanadium steel, it has maximum strength and service life. 12.5 inches (31.8 cm) long clutch fan removal tool handle can reduce user fatigue
[EASY TO USE]: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 1.26inch (32mm) or 1.42inch (36mm) (both included) spanner to undo nut; If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
[SET INCLUDE]: 1PC 1.26-inch(32mm) spanner; 1PC 1.42-inch(36mm) spanner; 1PC pulley bar.

SaleRank No. #12

Lisle 44180 Fan Clutch Spanner Wrench

For GM, Jeep and Dodge Trucks, Vans and SUVs With Pressed on Water Pump Pulleys.
The double-ended spanner wrench fits the holes in pressed-on water pump pulleys.
Hold the pulley firm with the spanner wrench.
Use the appropriate open end wrench to turn the fan clutch nut (#43560 36mm turning wrench works on many applications).

Rank No. #13

OTC 4652 Stinger Adjustable Fan Clutch Holding Tool

Adjustable jaws fit various water pump pulley bolt patterns
Jaws adjust from 1/ 2 inch to 8-5/16 inch opening
Jaws lock in place to securely hold water pump bolts
A long handle offers leverage for extra torque

SaleRank No. #14

8MILELAKE Fan Clutch Wrench Set 10pc Clutch Remover Installer Kit

-Removing fan clutches to replace Water pumps or for other engine service doesn't have to be a headache.
-A must for any front engine service
-Fit into close quarters where conventional wrenches just won't get the job done.
-Heat treated to with stand high torque needed to remove some fan clutches.
-Blow molded case for easy storage and transport

Rank No. #15

EWK Universal Camshaft Pulley & Fan Clutch Removal Holder Set, Cam Sprocket Holding Tool

【Extended Handle Design】Our extended hanle is longer than others in the market, it makes job more easy. Great camshaft sprocket tool for timing belt changes, cam seal replacement, cam gear removal, and camshaft pulleys installation. Also works on diesel injection pump or water pump.
【Adjustable Arm Design】Adjustable arm design fit the sprocket hole from 1-1/2" to 8-5/8". EWK camshaft sprocket tool provide maximum working range in the market.
【4 Size hold Pin】4 different size hold pin 6-10mm, 8-11mm, 10-12mm, 11-16mm. They can be applied most of camshaft pulley in the market.
【Heavy Duty】Premium steel and strengthen heat treatment provide the heavy duty class tool. Highly recommend by professional mechanics!
【12+6 Month】Durable products backed by an extraordinary 12+6 months warranty.

Rank No. #16

BETOOLL 8PCS Pneumatic Fan Clutch Wrench, 43300 Fan Clutch Removal Tool Kit, Auto Repair Spanner Kit Installs Fan Clutch Compatible with Ford, GM, Chrysler and Jeep

Fitment: Compatible with Ford, GM, Chrysler & Jeep, fit for 4.3L, 5.0L, or 5.7L GM pick up (van, mini-van, or SUV). (Kindly note: please make sure the size you need before purchase)
7 Driving Wrenches Sizes: 7/8", 32mm, 36mm, 40mm thin and 47mm size to fit Ford 6.0L and 6.4L Powerstroke diesel pickup. 1-7/8" and 2" are also included in the set.
Easy to Use: Just slip the tool into the air hammer select the correct wrench size for the fan nut and a couple of pops of the air hammer and the fan clutch is loose. No need for any other special pinning tools. (Note: Air Hammer is NOT included)
High Quality: made of sturdy steel, ensures high strength and durability, great resistance to corrosion and rust.
Coming with Premium packaging box, convenient for storage.

SaleRank No. #17

Lisle 43580 Short Spanner Holding Wrench

GM/Dodge Holding Wrench
Item Package Dimension: 15L x 12.5W x 2.25H inches
Item Package Weight - 4.7 Pounds
Item Package Quantity - 1
Product Type - WRENCH

Rank No. #18

Universal Fan Clutch Wrench & Water Pump Pulley Holding Tool, Compatible With Land Rover And Host of Other Makes

[FITS] - This universal fan clutch fits a host of maskes and models with Buick engines (see below) as well as Land Rover Discovery I (1994-1999), Discovery Series II (1999-2004), Defender 90 (1994-1997), Defender 110 (1993), Defender 300Tdi (1992-1998), Range Rover Classic (1987-1995) and Range Rover P38 (1995-2002)
[USE] - At last, a sensible way to remove and replace your viscous fan clutch without ruining it! The Universal Fan Clutch Wrench fits bolt-on type pulleys. No adjusting or fiddling. Simply hook on with one hand and hold, then use one of our Fan Clutch Wrenches (32 mm or 36 mm) to remove the viscous fan clutch
[NOTE] - Reverse to install. Our professional-quality fan clutch wrenches are a full 17" long with enough leverage to easily remove the viscous coupler and fan. Must be used in combination with the Universal Water Pump Wrench to remove viscous fan

Rank No. #19

Performance Tool W80498 Gm Fan Clutch Wrench

For use on 1996 and later GM trucks and vans, 4.3l Astro & Safari vans, Blazer and Jimmy SUV, 2.2L 4CYL & 4.3L V-6 S-10 & Sonoma small pickup trucks
For use on G1500 or G2500 Chevy Express, G1500 or G2500 Savanna Vans, 5.7 L V-8, suburban, Tahoe and Yukon
Designed to work with both 10mm and 13mm pulley bolts
Works with 4.3L-6,5.0L V-B and 5.7L V-8, C1500, C25000, C35000, K1500, C1500 Sierra, C2500 Sierra, C3500 Sierra & K1500 Sierra Pickups
G1500 or G2500 Chevy Express, G1500 or G2500 Savana vans.

Rank No. #20

Orion Motor Tech Fan Clutch Wrench Set with 32mm Nut and Water Pump Pulley Holder for BMW E34 E36 E39 E46 E90, 2pc, Silver

CUSTOM PURPOSE SET---This 2 piece tool set includes an extra-long 32mm wrench and purpose built holding tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines, compatible with most BMW E-series sedans including the E34, E36, E39, E46, E90, and more
GALVANIZED CARBON STEEL---These timing repair tools are made from heavy duty structural steel for reliable strength along the entire shaft; each one is further galvanized to resist wear, tear, and corrosion under even punishing use
HIGHLY VERSATILE---This wrench and holder set precisely fits a wide range of engines, including the M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, and S50B32
EASE OF USE---The 1'3" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily
SERVICE & SUPPORT---Orion Motor Tech backs this fan clutch tool kit with a 1 year strong warranty and its usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your import cars for years to come

Last update on 2023-08-04 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Fan Clutch Holding Tool?

Do you get stressed out thinking about shopping for a great Fan Clutch Holding Tool? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Fan Clutch Holding Tool, which is why we have assembled a comprehensive list of the greatest Fan Clutch Holding Tool available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Fan Clutch Holding Tool that you consider buying. Your questions might include the following:

Is it worth buying an Fan Clutch Holding Tool?
What benefits are there with buying an Fan Clutch Holding Tool?
What factors deserve consideration when shopping for an effective Fan Clutch Holding Tool?
Why is it crucial to invest in any Fan Clutch Holding Tool, much less the best one?
Which Fan Clutch Holding Tool are good in the current market?
Where can you find information like this about Fan Clutch Holding Tool?

We’re convinced that you likely have far more questions than just these regarding Fan Clutch Holding Tool, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Fan Clutch Holding Tool, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Fan Clutch Holding Tool. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Fan Clutch Holding Tool buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Fan Clutch Holding Tool currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Fan Clutch Holding Tool has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Fan Clutch Holding Tool?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Fan Clutch Holding Tool.
Customer Ratings: Number ratings grade Fan Clutch Holding Tool objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Fan Clutch Holding Tool.
Product Quality: You don’t always get what you pay for with an Fan Clutch Holding Tool, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Fan Clutch Holding Tool is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Fan Clutch Holding Tool information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Fan Clutch Holding Tool is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

20 Best Fan Clutch Holding Tool of 2023 – Romance University

How Do You Buy The Best Fan Clutch Holding Tool?

Related Post: