Skip to content

Ferrule Puller

The Best Ferrule Puller of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Ferrule Puller of 2023. Check our ranking below.

2,708 Reviews Scanned

Rank No. #1
Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool
  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool.
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple.
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
  • 【Great Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right.
Rank No. #2
Compression Sleeve Puller Tool Remove Ferrule & Nut OF Pipe,Ferrule Puller For 1/2” Copper Water Compression Sleeve And 1/2” Copper Tubing,Compression Ring Removal Tool Ferrule Removal
  • 【Operating Steps】-- Method 1: This ferrule puller for disassembling sleeve only --- Place the sleeve between the red notched end of the tool (notch clamps the sleeve). Method 2: Remove the compression nut and sleeve --- Place the red notched end of the compression sleeve puller behind the compression nut. Ensure the compression sleeve puller aligns correctly with the pipe, then rotate the handle approximately 10-15 turns to remove the nut and sleeve.
  • 【Save Time】This compression sleeve puller tool is easy to use in relatively tight spaces and restores previously crimped copper pipes to a perfect circular shape. It won't damage the copper material. Making the removal of sleeves easy, it simplifies pipe work.
  • 【Wear-Resistant】-- Even if existing valves are severely corroded or frozen, you can rotate the lever to remove the old compression sleeve from the pipe. Ensure the compression ring removal tool aligns correctly with the pipe,then rotate the compression fitting removal tool handle approximately 10-15 turns to remove the nut and sleeve. Easily and quickly address the issue of compression valves failing due to minor leaks.
  • 【No Damage to Walls, Copper】This compression ring puller tool can remove leaking compression sleeves without damaging walls, allowing for easy removal of nuts and sleeves from the pipes. The ferrule removal tool is designed to dismantle 1/2-inch copper water compression sleeves.
  • 【Ferrule Puller】We provide one year service for this ferrule puller for 1/2 copper pipe. If there are any issues with this ferrule blaster, we will respond within 24 hours.
Rank No. #3
Compression Sleeve Puller Remove Tool Nut & Ferrule of Pipe 03943 - Sleeve Remover for 1/2-Inch Compression Fittings Only - Plumbing Tools Compression Ring Removal Tool Corroded & Frozen Supply Stops
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes.
  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe.
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant.
  • 100% QUALITY GUARANTEE – ONE YEAR MONEY BACK. Buy with confidence and add to cart now! We provide 100% customer support 1-year product warranty. Have any problem, please email us, we'll reply within 12 hours.
Rank No. #4
Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool
  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool.
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple.
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small leaks. Fully machined body and screw, this ferrule puller is corrosion resistant & wear resistant.
  • 【2 Ways To Remove】Remove the old compression fitting or the old angle stop.WAY 1: ONLY REMOVE THE FERRULE---Let the ferrule in between the red notched end of the tool (notched clamping ferrule). WAY 2: BOTH REMOVE THE COMPRESSION NUT AND FERRULE---Place red notched end of tool behind compression nut. And then both way1 or way2 all need to: Engage the silver head end in tubing. Hold tool firmly while turning the t-bar handle, the puller tool will automatically pull compression nut and ferrule.
  • 【Great Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right.
SaleRank No. #5
Olive Puller Not Damage The Pipe Olive Remover Ferrule Puller Corrosion-Resistant Compression Ring Removal Tool Suitable for Brass Pipes with Diameters of NPT 1/2" & NPT 3/4" Ferrule Removal Tool
  • 【Olive Puller That Will Not Damage The Pipe】This DUOYI olive puller is an ideal tool for taking out olives.Without damaging the pipe,puller utilises the compression fitting locking nut to remove the olives which used or damaged from the copper piping.
  • 【Suitable For Brass Pipes With Diameters Of NPT 1/2 Inch & NPT 3/4 Inches】The olive puller can work on air-conditioning pipes,and is suitable for brass pipes with diameters of NPT 1/2 Inch & NPT 3/4 Inches.
  • 【Abrasion-Resistant & Corrosion-Resistant Solid Brass】The DUOYI ferrule puller is made of high-quality solid brass,which not only has high strength and high hardness,but also has good wear and corrosion resistance. In addition,the olive puller has a smooth surface High,with high-grade texture,and long service life,can provide you with long-term service.
  • 【Easy To Use】Olive ring removal tool is easy to operate,and you can work without reading the manual or with the help of other tools,reducing work time and energy.
  • 【Suitable for various tasks】Compression ring removal tool is suitable for various tasks.It can increase torque and remove olives more easily.It provides a quick and reliable remedy for removing most olives.

Last update on 2025-07-05 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Ferrule Puller?

Do you get stressed out thinking about shopping for a great Ferrule Puller? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Ferrule Puller, which is why we have assembled a comprehensive list of the greatest Ferrule Puller available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ferrule Puller that you consider buying. Your questions might include the following:

  • Is it worth buying an Ferrule Puller?
  • What benefits are there with buying an Ferrule Puller?
  • What factors deserve consideration when shopping for an effective Ferrule Puller?
  • Why is it crucial to invest in any Ferrule Puller, much less the best one?
  • Which Ferrule Puller are good in the current market?
  • Where can you find information like this about Ferrule Puller?

We’re convinced that you likely have far more questions than just these regarding Ferrule Puller, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Ferrule Puller, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ferrule Puller. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Ferrule Puller buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ferrule Puller currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Ferrule Puller has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Ferrule Puller?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Ferrule Puller.
  5. Customer Ratings: Number ratings grade Ferrule Puller objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ferrule Puller.
  7. Product Quality: You don’t always get what you pay for with an Ferrule Puller, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Ferrule Puller is should be an indication of how long it will work out for you.

We always remember that maintaining Ferrule Puller information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Ferrule Puller is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: